program FPCM8

Keynote Address : Composite Material Parts in Renault Cars : the Past , the Present and the Future
Alain GIOCOSA, Géneral Manager of Polymers Engineering Department, RENAULT, France
Chair : F. Trochu

FPCM8#18
Modeling of Resin Cure Kinetics for Molding Cycle Optimization
Edu Ruiz, F. Waffo, C. Billotte, F. Trochu (École Polytechnique de l’Université de Montréal, Canada), J. Owens (GM Research and Development Center, Materials and Process Lab

FPCM8#19
A Stereo Photography System for Monitoring Full Field Thickness Variation During Resin Infusion
Q. Govignon, S. Bickerton, J. Morris, J. Lin (University of Auckland, New Zealand )

FPCM8#29
Experimental Investigation of the Compressibility and Permeability of Fabric Reinforcements
E.C. van de Ven, R. Loendersloot, R. Akkerman (University of Twente, Netherlands)

FPCM8#4
Numerical Simulation of the Infusion Processes. Validation & Parametric Study
Tariq Ouahbi, Abdelghani Saouab, Joel Bréard, Pierre Ouagne (Université du Havre, France), Sylvain Chatel (European Aeronautic Defence and Space - Corporate Research Center, France)

FPCM8#6
A Fast Solution Method for Modeling the RTM-Process Using Simplified Geometries
F. Klunker, G.Ziegmann (Clausthal University of Technology, Germany)

FPCM8#22
Nonconforming Elements for Liquid Composite Molding Process Simulations
Piaras Kelly, Sam Jennings (University of Auckland, New Zealand)

FPCM8#48
Simulation of Articulated Compression Resin Transfer Molding
V. Achim, S. Soukane, R. Gauvin, F. Trochu (École Polytechnique de l’Université de Montréal, Canada)

FPCM8#39
A Simplified Numerical Approach to Simulate Resin Transfer Molding with a Dispersion Medium
Edu Ruiz, F. Trochu (École Polytechnique de l’Université de Montréal, Canada), S. Chatel (European Aeronautic Defense and Space Company, France)

FPCM8#5
Wisetex-Based Models of Permeability of Textiles
Stepan V.Lomov, Ignaas Verpoest, Bart Verleye, Bertrand Laine, Fabrice Boust (Katholieke Universiteit Leuven, Belgium)

FPCM8#10
Predicting the Permeability of Textile Reinforcements via a Hybrid Navier-Stokes-Brinkman Solver
B. Verleye, D. Roose, S.V. Lomov, I. Verpoest, M. Griebel (Katholieke Universiteit Leuven, Belgium), M. Klitz, R. Croce (Institute for Numerical Simulation, Bonn, Germany)

FPCM8#17
A Permeability Prediction for Non-Crimp Fabrics
R. Loendersloot, R. Akkerman (University of Twente, Netherlands)

	FPCM8 DAY 3 - Thursday July 13, 2006
8:00 - 8:45	Keynote Address : Composite Material Parts in Renault Cars : the Past , the Present and the Future Alain GIOCOSA, Géneral Manager of Polymers Engineering Department, RENAULT, France Chair : F. Trochu
	Session 9 : Materials characterisation - II Co-Chairs : S. Comas-Cardona and J. Summerscales
8:45 - 9:10	FPCM8#18 Modeling of Resin Cure Kinetics for Molding Cycle Optimization Edu Ruiz, F. Waffo, C. Billotte, F. Trochu (École Polytechnique de l’Université de Montréal, Canada), J. Owens (GM Research and Development Center, Materials and Process Lab
9:10 - 9:35	FPCM8#19 A Stereo Photography System for Monitoring Full Field Thickness Variation During Resin Infusion Q. Govignon, S. Bickerton, J. Morris, J. Lin (University of Auckland, New Zealand )
9:35-10:00	FPCM8#29 Experimental Investigation of the Compressibility and Permeability of Fabric Reinforcements E.C. van de Ven, R. Loendersloot, R. Akkerman (University of Twente, Netherlands)
	Session 10 : Simulation - II Co-Chairs : S. Advani and F. Boust
10h30 - 10:55	FPCM8#4 Numerical Simulation of the Infusion Processes. Validation & Parametric Study Tariq Ouahbi, Abdelghani Saouab, Joel Bréard, Pierre Ouagne (Université du Havre, France), Sylvain Chatel (European Aeronautic Defence and Space - Corporate Research Center, France)
10:55 - 11:20	FPCM8#6 A Fast Solution Method for Modeling the RTM-Process Using Simplified Geometries F. Klunker, G.Ziegmann (Clausthal University of Technology, Germany)
11:20 - 11:45	FPCM8#22 Nonconforming Elements for Liquid Composite Molding Process Simulations Piaras Kelly, Sam Jennings (University of Auckland, New Zealand)
11:45 - 12:10	FPCM8#48 Simulation of Articulated Compression Resin Transfer Molding V. Achim, S. Soukane, R. Gauvin, F. Trochu (École Polytechnique de l’Université de Montréal, Canada)
12:10 - 12:35	FPCM8#39 A Simplified Numerical Approach to Simulate Resin Transfer Molding with a Dispersion Medium Edu Ruiz, F. Trochu (École Polytechnique de l’Université de Montréal, Canada), S. Chatel (European Aeronautic Defense and Space Company, France)
	Session 11 : Permeability Prediction - II Co-Chairs : R. Akkerman and P. Krawczak
1:55 - 2:20	FPCM8#5 Wisetex-Based Models of Permeability of Textiles Stepan V.Lomov, Ignaas Verpoest, Bart Verleye, Bertrand Laine, Fabrice Boust (Katholieke Universiteit Leuven, Belgium)
2:20 - 2:45	FPCM8#10 Predicting the Permeability of Textile Reinforcements via a Hybrid Navier-Stokes-Brinkman Solver B. Verleye, D. Roose, S.V. Lomov, I. Verpoest, M. Griebel (Katholieke Universiteit Leuven, Belgium), M. Klitz, R. Croce (Institute for Numerical Simulation, Bonn, Germany)
2:45 - 3:10	FPCM8#17 A Permeability Prediction for Non-Crimp Fabrics R. Loendersloot, R. Akkerman (University of Twente, Netherlands)
HOME