| Proceedings of the Ninth International Conference
on Flow Processes in Composite Materials (FPCM-9) held in Montréal during 8-10 July 2008 |
Refereed papers can be found in Composites Part A, January 2010, 41(1).
| Day 1 | AM Tuesday 8 July 2008 | AM Tuesday 8 July 2008 |
| 7h30-8h20 8h20-8h30 |
Registration and Coffee (Foyer Jeanne-Mance) Opening Remarks (Jeanne-Mance) |
|
| 8h30-9h15 | Dr Anoush Poursartip (Professor, University of British Columbia/Convergent Manufacturing Technologies Inc. Keynote presentation: Issues in Developing and Applying Process Models to Aid in Composites Manufacturing |
|
| 9h20-10h50 | Flow Process 1 (Jeanne-Mance) Chair: Pascal Hubert, McGill University Cochair: Simon Bickerton, The University of Auckland |
Resin Infusion 1 (Hospitalité) Chair: Al Loos, University of Michigan Cochair: Peter Mitschang, IVW, Kaiserslautern, Germany |
| 09h20 | Dhiren Modi, Michael Johnson, Andrew Long and Christopher Rudd (University of Nottingham, UK) Experimental Validation of Pressure and Fill Time Formulations for the Vacuum Infusion Process |
Sylvain Drapier, P. Celle and J.-M. Bergheau (École des Mines de St-Étienne, France) Numerical Model for Fluid Infusion during Infusion-Based Processes |
| 09h45 | John N. Owens (General Motors R&D, Detroit, USA) Variable Catalyst Injection Rate for Cycle Time Reduction in Liquid Composite Molding |
RK Cullen, SM Grove, J Summerscales and HN Dhakal (University of Plymouth, UK) Flow Convergence and Void Formation in Resin-Infused Cored Sandwich Structures |
| 10h10 | Mylène Deléglise, Philippe Legrognec, Bruce Claudé, Dirk Wilde, Christophe Binétruy and Patricia Krawczak (EMD, Douai, France) Highly Reactive Resin Viscosity Prediction in Liquid Composite Molding Processes |
Abdelatif Atarsia, L Fernandes and S Saleh (Bombardier Aerospace Inc., Montreal, Canada) Effect of Processing Variables on Large Part Infusion Process |
| 10h35 | Sandra S Tavares, V. Michaud and J.-A. E Månson (Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland) Semipregs: How Through-Thickness Air Permeability and Resin Flow Correlate During Vacuum-Bag Only Cure |
Julie JE Teuwen and Harald E.N. Bersee (Delft University of Technology, The Netherlands) Process Optimisation for Vacuum Infused Anionic Polyamide-6 Composites |
| 10h50-11h20 | Coffee Break (Pavillon) | Coffee Break (Pavillon) |
| 11h20-12h50 | Permeability Evaluation 1 (Jeanne-Mance) Chair: Krishna Pillai, Univ. of Wisconsin, USA Cochair: John Summerscales, University of Plymouth, UK |
Material Characterization (Hospitalité) Chair: Anoush Poursartip, UBC, Canada Cochair: Christian Bélanger, IMI, Canada (Hospitalité) |
| 11h20 | B Verleye, R Croce, M Griebel, M Klitz, Stepan Lomov, G Morren, H Sol, I Verpoest and D Roose (KUL, Leuven & VUB, Brussels, Belgium) Permeability of Textile Reinforcements: Simulation; Influence of Shear, Nesting and Boundary Conditions; Validation |
Matthieu Thomas, N Boyard, Y Jarny and D Delaunay (École Polytechnique de l’Université de Nantes, Nantes, France) A New Experimental Device for Global Thermal Characterization of Orthotropic Composites |
| 11h45 | Sylvain Chatel, S Maison-le-Poec (EADS Innovation Works, Paris, France), F Trochu, Edu Ruiz (École Polytechnique, Montreal, Canada), J Bréard, P Ouagne (Le Havre University, France) A Permeability Measurement Method Dedicated to a Composite Process Family |
YA Msallem, Frédéric Jacquemin, N Boyard, A Poitou, D Delaunay, S. Chatel (École Centrale Nantes, Polytech’Nantes & EADS, Paris, France) Characterization of an Aeronautic Epoxy Resin during the Manufacturing Process – Simulation of Residual Stresses in Epoxy Matrix Composites |
| 12h10 | Pierre Ouagne, J Bréard (Le Havre University, France) Continuous Transverse Permeability of Fibrous Media |
Loleï Khoun, Timotei Centea, Pascal Hubert (McGill University, Montreal, Canada) Experimental and Numerical Analysis of the Dimensional Stability of an RTM Carbon Epoxy Aerospace Structure |
| 12h35 | Simon Bickerton, S Comas-Cardona, I Razali, M Deléglise, WA Walbran, C Binétruy and P Krawczak (New Zealand & France) Spatial Compaction and Saturated Permeability Variations of Fibre Reinforcements |
Isabel Harismendy, M Del Río, Edu Ruiz and JA García (National Renewable Energy Centre (CENER), UPV, Valencia & Canada) Modelling VARTM of Wind Turbine Blades under Non-Isothermal Boundary Conditions |
| 12h50-13h50 | Lunch Buffet (Bar Central) | Lunch Buffet (Bar Central) |
| Day 1 | PM Tuesday 8 July 2008 | PM Tuesday 8 July 2008 |
| 14h00-15h30 | Preform Compaction 1 (Jeanne-Mance) Chair: Christophe Binétruy (EMD, France) Cochair: Véronique Michaud (EPFL, Switzerland) |
Permeability Evaluation 2 (Hospitalité) Chair: Gerhard Ziegmann (TU Clausthal, Germany) Cochair: Gilbert Lebrun (UQTR, Canada) |
| 14h00 | Piaras A Kelly (The University of Auckland, New Zealand) A Compaction Model for Liquid Composite Moulding Fibrous Materials |
Gunnar Rieber, Peter Mitschang (IVW, Kaiserslautern, Germany) Influence of Stitching Seams on Two-Dimensional Permeability |
| 14h25 | Pierre Badel, Eric Maire, Emmanuelle Vidal-Sallé, Philippe Boisse (INSA-Lyon, France) Computational Analyses of Mesocopic Composite Reinforcement Deformation During Preforming |
Ehsan Mohseni Languri, Andrew Vechart, Hua Tan, Krishna M Pillai (University of Wisconsin-Milwaukee, USA) Effect of Preform Aspect Ratio on Permeability Measured through 1D Flow Experiments |
| 14h50 | William A Walbran, S Bickerton, PA Kelly (The University of Auckland, New Zealand) Predicting Stress Distributions Exerted on LCM Tools During Filling Phases |
Exequiel S. Rodríguez, Gastón Francucci and Analía Vázquez (INTEMA, National University of Mar del Plata, Argentina) Study of Saturated and Unsaturated Permeability in Natural Fiber Fabrics |
| 15h15 | Florian Klunker, Santiago Aranda, Gerhard Ziegmann, Paulin Fideu, Philipp Baisc, Axel Herrmann (TU Clausthal & CTC, Stade, Germany) Permeability and Compaction Models for Non Crimped Fabrics to Perform 3D Filling Simulation of Vacuum Assisted Resin Infusion |
Laurent Bizet, P Ouagne, J Bréard, C Baley, J-P Jernot, M Gomina (Le Havre University, France) Transverse Permeability and Kozeny Constant in Flax Fiber Mats Preforms |
| 16h00-18h30 | Sporting Events | Cultural Visit of Old Montreal |
| Day 2 | AM Wednesday 9 July 2008 | AM Wednesday 9 July 2008 |
| 8h30-9h15 | Véronique Michaud (École Polytechnique Fédérale de Lausanne (EPFL), Suisse) Keynote presentation: A Review of Saturation Models in Liquid Composite Molding |
|
| 9h20-10h50 | New Processes (Jeanne-Mance) Chair: François Robitaille (University of Ottawa, Canada) Cochair: Gerhard Ziegmann (TU Clausthal, Germany) |
Preform Compaction 2 (Hospitalité) Chair: Piaras Kelly (University of Auckland, New Zealand) Cochair: Philippe Boisse (INSA, Lyon, France) |
| 9h20 | Edu Ruiz, L Briones, E Allard, F Trochu (CCHP, École Polytechnique de Montréal, Canada) Flexible Injection: A Novel LCM Technology for Low Cost Manufacturing of High Performance Composites, Part I: Experimental Investigations |
François Robitaille (University of Ottawa, Ottawa, Canada) A New Interpolated Model for Preform Concurrent Predictions of Flow, Thermal and Structural Properties for Textile Composites |
| 9h45 | François Trochu, S Soukane, B Touraine (CCHP, École Polytechnique de Montréal, Canada) Flexible Injection: A Novel LCM Technology for Low Cost Manufacturing of High Performance Composites, Part II: Numerical Modeling |
John M Bayldon and Isaac M Daniel (Northwestern University, USA) Compaction in the Vacuum Assisted Resin Transfer Molding Process |
| 10h10 | Russell J Caspe, VL Coenen, A Nesbitt and AN Wilkinson (Northwest Composites Centre, University of Manchester, UK) Through-Thickness Melding of Advanced CFRP for Aerospace Applications |
Jean-Pascal Schroeder, E Berry, N Juillard (J B Martin Limited, Canada) Bridging the Performance Gap between Prepregs and Conventional Fabrics |
| 10h35 | Justin B Alms, James L Glancey and Suresh G Advani (Center for Composite Materials (CCM), Univ. of Delaware, USA) An Experimental Approach to Port-Based Injection in Vacuum Infusion Processing |
François Boussu, Xavier Legrand, Saad Nauman, Christophe Binetruy (École des Mines de Douai (EMD), France) Mouldability of Angle Interlock Fabrics |
| 10h50-11h20 | Coffee Break (Pavillon) | |
| 11h20-12h50 | Process Simulation 1 (Jeanne-Mance) Chair: Paolo Ermanni (ETH, Switzerland) Cochair: Stepan Lomov (KUL, Belgium) |
Flow Process 2 (Hospitalité) Chair: Sylvain Drapier (EMSE, France) Cochair: Suresh Advani (University of Delaware, USA) |
| 11h20 | Valentin Neacsu, LP Wang and SG Advani (Center for Composite Materials (CCM), Univ. of Delaware, USA) Lattice Boltzmann Method for Microflow Analysis in Liquid Composite Molding |
JSU Schell, Mylène Deléglise, C Binetruy, P Krawczak, P Ermanni (Ecole des Mines de Douai, France & ETH, Zurich, Switzerland ) Numerical Prediction of Meso-Scale Voids in Liquid Composite Moulding and Experimental Validation Including Variability Study |
| 11h45 | F Loix, P Badel, Laurent Orgéas, C Geindreau, P Boisse, J-F Bloch (Université de Grenoble, France) Mesoscale Simulation of the Flow of Non-Newtonian Fluids Through Sheared Textile Reinforcements |
T Staffan Lundström, Vilnis Frishfelds, Andris Jakovic (Lulea, Sweden) Bubble Formation and Motion in Non-Crimp Fabrics with Perturbed Bundle Geometry |
| 12h10 | Frederik Desplentere (KHBO), I Verpoest and SV Lomov (KUL, Belgium) Multiscale Modelling of Stochastic Effects in Mould Filling Simulations for Thermoplastic Composites |
Yohann Ledru, R Piquet, F Schmidt, L Michel, G Bernhart ( École des Mines d’Albi, France) Modeling of Void Growth Mechanisms during the Manufacturing of Composite Laminates |
| 12h35 | Wouter JB Grouve, Remko Akkerman (University of Twente, The Netherlands) An Idealised Boundary Condition for the Meso-Scale Analysis of Textile Impregnation Processes |
René Arbter, Paolo Ermanni (Swiss Federal Institute of Technology, Switzerland) Simulation of RTM Processes Including Stochastic Disturbances |
| 12h50-13h50 | Lunch Buffet (Bar Central) | |
| Day 2 | PM Wednesday 9 July 2008 | PM Wednesday 9 July 2008 |
| 14h00-15h30 | Resin Infusion 2 (Jeanne-Mance) Chair: Isabel Harismendy (CENER, Spain) Cochair: Krishna Pillai (Univ. of Wisconsin, USA) |
Thermoplastics (Hospitalité) Chair: Didier Delaunay (Polytech’Nantes, France) Cochair: Véronique Michaud (EPFL, Switzerland) |
| 14h00 | Alfred C Loos, Goker Tuncol, Roberto J Cano, Brain J Jensen, Stephen J Hales and Joel A Alexa (The University of Michigan, USA) Fabrication of Fiber/Metal Hybrid Composites by the VARTM Process |
Pierre JJ Dumont, Laurent Orgéas, Véronique Michaud and Denis Favier (Grenoble, France & EPFL, Switzerland) Experimental Study of Fiber-Matrix Separation During Compression of Glass Mat Thermoplastics |
| 14h25 | Quentin Govignon, S Bickerton, PA Kelly ( The University of Auckland, New Zealand) Simulation of the Complete Resin Infusion Process |
Claire Steggall, Pavel Simacek, Suresh G. Advani and Shridhar Yarlagadda (CCM, Univ. Delaware, USA) A Model for Thermoplastic Melt Impregnation of Fiber Bundles During Consolidation of Powder-Impregnated Continuous Fiber Composites |
| 14h50 | P Wang, M Demirel, Sylvain Drapier, J Molimard, A Vautrin and P Henrat (Ecole des Mines de St-Étienne, Hexcel Corp., France) Characterization of LRI Filling by Thermocouple Detection and Fringe Pattern Projection |
Gilbert Lebrun and Johanne Denault (IMI, Canada) Effect of Annealing on the Thermal Expansion Coefficient of Bidirectional Thermoplastic Composites |
| 15h15 | RJ Johnson, Ranga Pitchumani (University of Connecticut, USA) Localized Induction Heating Based Control of Reactive Resin Flow in a VARTM Process |
Mohammad Tahaye Abadi (Aerospace Research Institute, Iran) Viscoelastic Model for Thermoforming Process of Thermoplastic Composite Sheets |
| 15h30-16h00 | Coffee Break (Pavillon) | Coffee Break (Pavillon) |
| 16h00-16h30 | Permeability Benchmark Summary (Jeanne-Mance) Chairmen: Edu Ruiz and John Summerscales | |
| 16h00-17h45 | Poster Session (Pavillon) Chairmen: Pascal Hubert and Hiroyuki Hamada | Poster papers are listed at the end of this page |
| 17h30-19h15 | Cocktail and music with Jessica Vigneault | |
| 19h15-21h30 | Banquet (Café Fleuri) | |
| Day 3 | AM Thursday 10 July 2008 | AM Thursday 10 July 2008 |
| 8h30-9h15 | Jean-Pierre Cauchois (Pôle de Plasturgie de l’Est (PPE), France) Keynote presentation: Evolution of Composites in the Aeronautic Industry | |
| 9h20-10h50 | Industrial Applications 1 (Jeanne-Mance) Chair: Pascal Hubert (McGill University, Canada) Cochair: Didier Delaunay (Polytech’Nantes, France) |
Nano-Composites (Hospitalité) Chair: Johanne Denault (IMI, Canada) Cochair: Kai Schierholz (Nanoledge) |
| 9h20 | Vincent Achim and Edu Ruiz (École Polytechnique de Montréal, Canada) Guiding Selection toward Cost-Effective Composite Manufacturing |
R Misiego, C Cano and R Byron Pipes (Purdue University, USA) Analysis of Cellular Microstructure Inflation in Solid Polyamic Acid Particles Containing Carbon Nanotubes |
| 9h45 | Rani Richardson, Laurent Delsart, Philippe Savignard (Dassault Système, France & USA) Early Fiber Deposit Simulation Capabilities for Designers to Reduce Cost and Production Time |
Vahid Mirjalili, Behnam Ashrafi, Kamal Adhikari and Pascal Hubert (McGill University, Montreal, Canada) Effect of the Single Walled Carbon Nanotube Content on Resin Flow |
| 10h10 | Jeffrey Lawrence, ST Holmes, M Louderback, P Simaceck and SG Advani (V System Composites,Inc. & CCM, Delaware, USA) The Use of Flow Simulations of Large Complex Composite Components Using the VARTM Process |
Isabelle Ortega, Edu Ruiz (École Polytechnique, Montréal, Canada) Dispersion and Dielectric Characterization of an Epoxy Resin Reinforced with Carbon Nanofibers |
| 10h35 | Pascal Casari, B Stervinou, P Davies, D Choqueuse (GeM, Nantes, IUT, IFREMER, Brest, France) Process-Mechanical Properties Relationship for an Aircraft Wing Spar: Comparison of Prepreg, LRI and RFI Techniques |
Tri-Dung Ngo, W Leelapornpisit, M-T Ton-That, KC Cole, M Sepehr (Industrial Materials Institute (IMI), Boucherville, Canada) Bio-Based Thermoset Polymer Nanocomposites |
| 10h50-11h20 | Coffee Break (Pavillon) | Coffee Break (Pavillon) |
| 11h20-12h50 | Industrial Applications 2 (Jeanne-Mance) Chair: Peter Mitschang (IVW, Kaiserslautern, Germany) Cochair: Paul Trudeau (École Polytechnique, Montréal, Canada) |
Green Composites (Hospitalité) Chair: Joël Bréard (Le Havre University, France) Cochair: Gilbert Lebrun (UQTR, Canada) |
| 11h20 | José Feigenblum, J Senmartin (RocTool, Savoie Technolac, France) RTM Technology Improvement with Tool Surface Heating by Induction |
Tan-Minh Ton-That, J Denault, K Cole, W Hu, Z Xiao, J Yang, D Rho, PCK Lau (Industrial Materials Institute ( IMI), Canada) Method for Improving Processing and Properties of Cellulose Fibre Thermoplastic Composites |
| 11h45 | Alan Harper (Magnum Venus Plastech Limited, UK) The Noble Art of Closed Mould Production |
Sébastien Migneault, A Koubaa, F Erchiqui, A Chaala, K Englund, M Wolcott (Univ. Laval, UQAT, Canada & Washington State Univ., USA) Effects of Processing Method and Fibre Characteristics on Microstructure and Properties of Wood-Plastic Composites |
| 12h10 | Sébastien Boutier (Chomarat Composites, France) How to Make a Choice between Liquid Composite Molding Processes? |
Hiroyuki Hamada, A Nakai, Y Takinishi, S Sahoo, S Comas-Cardona, C Binetruy, P Krawczak (Kyoto Inst. of Tech. (KIT), Japan & Ecole des Mines de Douai, France) Measurement of Permeability of Woven Jute Fabrics And Evaluation of Mechanical Properties of Jute Fabric-Reinforced Composites |
| 12h35 | Serge Mouton, D Teissandier, P Sébastian, JP Nadeau (University of. Bordeaux, ENSAM, Bordeaux, France) Manufacturing Requirements in Design: the RTM Process in Aeronautics |
Naoyuki Shikamoto, Patcharat Wongsriraksa, Akio Ohtani, Leong Yew Wei, Asami Nakai (Kyoto Institute of Technology (KIT), Japan) Processing and Mechanical Properties of Biodegradable Composites |
| 12h50-13h50 | Lunch Buffet (Bar Central) | |
| Day 3 | PM Thursday 10 July 2008 | PM Thursday 10 July 2008 |
| 14h00-15h30 | Control and Optimization (Jeanne-Mance) Chair: Simon Bickerton (University of Auckland, New-Zealand) Cochair: Tonio Garcia (UPV, Spain) |
Other Processes (Hospitalité) Chair: Byron Pipes (Purdue University, USA) Cochair: Christian Bélanger (IMI, Canada) |
| 14h00 | Jordy M Balvers, HEN Bersee and A Beukers ( Delft University of Technology, The Netherlands) Integration of Fiber Bragg Gratings In Woven Fabrics: Influences of Preform Compaction And Flow-Front Propagation |
Alain Trameçon, Patrick de Luca, Laurent Fontaine and Pierre Culière (ESI-Group, Paris, France) Finite Point Method Simulation Tool to Simulate and Improve Polyurethane Foaming Processes |
| 14h25 | Jihua Chen, M-A Octeau and M Hojjati (Institute for Aerospace Research, AMTC, Montreal, Canada Resin Flow Front and Cure Monitoring in Resin Transfer Molding (RTM) Process Using a Dielectric Sensor |
A Levy, Steven Le Corre, A Poitou, and E Soccard (École Centrale de Nantes, Nantes, France) Time Homogenization for the Modeling and Simulation of the Ultrasonic Welding of Thermoplastic Composites |
| 14h50 | XA Aduriz, C Lupi, Nicolas Boyard, JL Bailleul, D Leduc, D Delaunay and C Boisrobert (Polytech’Nantes, France) Fibre Optic Sensors Applied to Resin Transfer Molding: a Powerful Way for In-Situ Quantitative Control and Optimization |
Abel Cherevatsky, Mandy Buyum (Israel) Simulation of Resin Flow Through the Layers of Wet Wound Cylinder |
| 15h15 | Vincent Sobotka, Laetitia Perez, Yvon Jarny, Didier Delaunay (Ecole Polytechnique de l’Université de Nantes, Nantes, France) Thermal Control of the Resin Tranfer Molding Process |
N Kajioka, K Sungeon, M Okamura, Yuya Hidekuma, M Deconinck, A Nakai, H Hamada (DaikyoNishikawa Corp. & KIT, Japan) Development of Hollow Structural Member Using New SMC Molding Method |
| 15h30-16h00 | Coffee Break (Pavillon) | |
| 16h00-17h30 | Process Simulation 2 (Jeanne-Mance) Chair: Suresh Advani (University of Delaware, USA) Cochair: Christophe Binétruy (EMD, France) |
Special Topics (Hospitalité) Chair: Stepan Lomov (KUL, Belgium) Cochair: Paolo Ermanni (ETH, Switzerland) |
| 16h00 | J Antonio García, Ll Gascón, F Chinesca (Univ. Politécnica de Valencia (UPV), Spain & ENSAM, Paris, France) A Flux Limiter Strategy for Solving the Saturation Equation in Resin Transfer Molding Process Simulation |
Fidèle Moupfouma, Mona Cherkaoui and Eric De Roose (Bombardier Aerospace Core Engineering, Montreal, Canada) Composite Material Shielding Effectiveness in Static Electricity Environment |
| 16h25 | Hua Tan, Xiao-Min Chen, Krishna M Pillai, Thanasis D. Papathanasiou (University of Wisconsin-Milwaukee, USA) Evaluation of Boundary Conditions at the Clear-Fluid and Porous-Medium Interface Using The Boundary Element Method |
N Montes and Fernando Sánchez (Universidad Cardenal Herrera CEU, Spain) Flow Pattern Configuration Spaces in Liquid Composite Molding Process Design |
| 16h50 | H Farrahinia, Akbar Shojaei and MR Pishvaie (Sharif University of Technology, Tehran, Iran) Numerical Simulation and Optimization of Resin Transfer Molding Cycle with Dual-Initiator Systems |
Richard Loendersloot, WJB Grouve, R Akkerman and S van den Berg (University of Twente, The Netherlands) Permeability Prediction Using a Multigrid Method |
| 17h15 | Maciej Wysocki, Staffan Toll, Ragnar Larsson and Leif E Asp (SICOMP, Sweden) Hyperelastic Constitutive Models for Consolidation of Commingled Yarn Based Composites |
Sebastiaan P Haanappel, R Akkerman (University of Twente, The Netherlands) Non-Crimp Fabric Permeability Modelling |
| 18h00-19h00 | End of conference | End of conference |
| Day 4 | Friday 11 July 2008 | Networking Activity: Visit of LFIC St-Hubert and Fort Chambly |
| . | ||
| Poster papers | Poster papers | |
| 1-2 | Markus Nordlund, Véronique Michaud and Jan-Anders E. Månson ( Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland) Drainage Curve Measurements in Dual Scale Fiber Reinforcements |
Ensieta Rabearison, Ch Jochum, JC Grandidier (ENSIETA, Brest &ENSMA, Chasseneuil, France) A Finite Element Coupling Model for Internal Stress Prediction during the Curing of Thick Epoxy Composites |
| 3-4 | AC Long, H Lin, M Sherburn, Dhiren Modi, A Endruweit (University of Nottingham, UK) Finite Element Modelling of Compaction for Textile Reinforcements Using Automatically Generated Unit Cell Models |
Cristian Demaria, Edu Ruiz, François Trochu (École Polytechnique de Montréal, Canada) In-plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection |
| 5-6 | Gerd Morren, Hugo Sol (Vrije Universiteit Brussel (VUB), Belgium) In-Plane Permeability Tensor Identification Using an Inverse Method |
Sylvain Drapier, J Molimard, A Vautrin, P Henrat ( Ecole des Mines de Saint Etienne, France) Characterization of the Preform Thickness Variation during Infusion Processes by Fringe Projection |
| 7-8 | Hua Tan , Ehsan Mohseni Languri and Krishna M Pillai (University of Wisconsin-Milwaukee, USA) Prediction of Permeability in a Dual-Scale Fiber Mat sing Two Different Unit Cells |
Ehsan Mohseni Languri, Hua Tan, Krishna M Pillai (University of Wisconsin-Milwaukee, USA) Effect of Preform Aspect Ratio on the Unidirectional Flow Front during Mold Filling |
| 9-10 | Reza Samadi, Francois Robitaille (University of Ottawa, Canada) Compaction of Aligned Fibre Assemblies Using Particulate Methods |
MB Nziengui, M Hattabi and Jamal Echaabi (ENSEM, Université Hassan II Aïn Chok,Maroc) Viscoelastic Analysis of Fibrous Reinforcements in Liquid Composite Moulding Processes |
| 11-12 | Nicolas Montes, F Sánchez and A Falco (Escuela Superior de Enseñanzas Técnicas, Valencia, Spain Application of Flow Pattern Configuration Spaces to Optimization and Control of Liquid Composite Moulding Processes |
MC Ngueho Yemele, Ahmed Koubaa, A Cloutier, P Souloungang, M Wolcott (Université Laval, Québec, Canada) Effect of Bark Fibre Content and Size on Mechanical Properties of Bark/HDPE Composites |
| 13-14 | Hassine Bouafif, Ahmed Koubaa, Patrick Perré and Alain Cloutier (Université Laval, Québec, Canada) Effects of Fibre Characteristics on the Physical And Mechanical Properties of Wood Plastic Composites |
Yuya Hidekuma, A Ohtani, A Nakai and H Hamada (Kyoto Institute of Technology (KIT), Japan) Development of Continuous Braided Pultrusion Process |
| 15-16 | Asami Nakai, Aline Afflard, Naoyuki Shikamoto, Tomohiko Sugie, Akiko Odawara, Hiroyuki Hamada, Iori Nakabayashi, Kazuhiko Kosuge (Du Pont-Toray, France) Fabrication of CF/AF Fiber Hybrid Thermoplastics Composite |
M Sarata, M Deconinck, Yuya Hidekuma, A Nakai, H Hamada ( Kyoto Institute of Technology (KIT), Japan) Effect of Moisture Content on Natural Fiber Impregnation in SMC |
| 17-18 | Y Takai, T Ota, YW Leong, A Nakai and H Hamada (Kyoto Institute of Technology (KIT), Japan) Characterization of Fiber Hybrid Injection Moldings for Natural Fiber Composites |
S Na, Piaras A Kelly, S Bickerton (The University of Auckland, New Zealand) Global Optimization of Mould Filling Parameters During the Constant Speed Injection Compression Moulding Process |
| 19-20 | Nilmini PJ Dissanayake, John Summerscales, SM Grove and MM Singh (University of Plymouth, UK) Infusion of Natural vs. Synthetic Fibre Composites with Similar Reinforcement Architecture in the Context of a LCA |
Hasan Salek, Suong V Hoa and Johanne Denault (Concordia University, Industrial Materials Institute(IMI), Canada) Viscous Behavior of Resin and Flow through the Fiber Network of Carbon/PEKK Based Thermoplastic Composite |
| 21-22 | T Hirota, A Uotani, Y Ohmura, N Usui, J Nambu (Sumitomo Chemical Co., Japan) Development of Hybrid Technology for Automotive Interior Parts |
Tariq Ouahbi, CH Park, A Saouab, P Ouagne, J Bréard, S Chatel (Le Havre University & EADS Innovation Works, Suresnes, France) Identification of Preform Compressibility by Inverse Method |
| 23-24 | Tariq Daqoune, Edu Ruiz and François Trochu (Chair on Composites of High Performance (CCHP), Montreal, Canada) Study of the Shape of the Compaction Chamber in Flexible Injection |
Philippe Causse, Edu Ruiz and François Trochu (Chair on Composites of High Performance (CCHP), Montreal, Canada) Consolidation of Curved Composite Parts Manufactured by Flexible Injection |
| 25-26 | Marc-André Octeau, F Cloutier, J Feuvrier, S Soukane, F Trochu (École Polytechnique de Montréal, Canada) Numerical Simulation of Mould Filling and Thermal Behavior in the Manufacturing of an Aeronautical Composite Part |
Mounir Jaidann, S Roy, H Abou-Rachid, L-S Lussier, J Brisson (Defence R&D of Canada, Valcartier & Université Laval, Québec, Canada) Polymer/Plasticizer (HTPB/DOA) Blend Interactions with a RDX Crystal Surface |
| 27-28 | Y Takinishi, Y Kobayashi, Yuya Hidekuma, A Nakai, M Kobayakawa (Kyoto Institute of Technology (KIT) & Matsushita, Japan) Degradation of SMC Molding in Hot Water: Effect of Impregnation on Mechanical Properties with Spreading Glass Fiber |
Florent Cloutier, Sofiane Soukane, Francois Trochu (Chair on Composites of High Performance (CCHP), Montreal, Canada) Analysis of Multiple Zone Heating in Resin Transfer Molding |
| 29-30 | François LeBel, F Trochu, E Ruiz (Chair on Composites of High Performance (CCHP), Montreal, Canada) Thermosetting Matrix Composite Characterization and Cure Control via a Scale Model Mould |
Abbas Ghanbari, M Karimi, and MH Kish (Amirkabir University of Technology, Tehran, Iran) Phase Behavior of Water/Formic Acid/Polyamide 6 in Presence of Two Kinds of Nanoclays |