• Aerospace
• Airbus Qualified Test Method List (QTML)
• Automotive, and other land transport
• ISO 4210-x  Cycles. Safety requirements for bicycles.
• Defence
• UK Defence Standardization (Guidance)
• Energy
• Nuclear
• Oil and Gas Exploration and Exploitation (OGEE)
• DECOM North Sea
• DNVGL-ST-C501  Composite components
• DNVGL-ST-F119  Thermoplastic composite pipes
• IMO MODU  Code for the construction and equipment of Mobile Offshore Drilling Units, 2009 revised 2010.
• ISO 14692-1:2017  Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping, 2002 revised 2017.
• ISO 24817:2015  Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection, 2015.
• Renewables
• Infrastucture
• Bridges
• AASHTO  Guide Specifications for Design of FRP Pedestrian Bridges, 2008.
• AASHTO  LRFD Bridge Design Guide Specifications for GFRP-Reinforced Concrete, 2018.
• BS EN 124:2015  Gully tops and manhole tops for vehicular and pedestrian areas, 2015 revised March 2017.
• CIRIA C779F  Fibre Reinforced Polymer Bridges, October 2018.
• Highways England (and regional equivalents) CD368  Design of FRP Bridges and Highway Structures, BD 90/05 replaced February 2020.
• External strengthening
• ACI 440R-07  Report on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures, 2007.
• ACI 440.2R-08  Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, 2008.
• ACI 440.3R-12  Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures, 2012.
• ASTM D7565 / D7565M - 10  Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures, 2017.
• Gas cylinders
• GRP piping
• GRP tanks and vessels
• Reinforcing bars
• ACI 440R-07  Report on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures, 2007.
• ACI 440.4R-04  Prestressing Concrete Structures with FRP Tendons, 2004 reapproved 2011.
• ACI 440.5-08  Specification for Construction with Fiber-Reinforced Polymer Reinforcing Bars, 2008.
• ACI 440.6-08(17)  Specification for Carbon and Glass Fiber-Reinforced Polymer Bar Materials for Concrete Reinforcement, 2008 reapproved 2017.
• Street lighting
• BS EN 40-7:2002  Lighting columns. Requirements for fibre reinforced polymer composite lighting columns, April 2003.
• Marine
• ABS (American Bureau of Shipping) Rules & Guides
• DNV GL (Det Norske Veritas/Germanischer Lloyd) rules and standards
• International Convention for the Safety of Life at Sea (SOLAS), 1974.
• ISO 12215-x  Small craft. Hull construction and scantlings.
• Lloyd's Register's Rules and Regulations
• Red Ensign Group REG Yacht Code
• RINA SpA (Registro Italiano Navale) rules
• Rail
• Rail Industry Standards (RIS)
• NR BR843 Standard Lifting Barrier Mk II for Level Crossings, April 1991.
• Space
• European Cooperation for Space Standardization (ECSS).  Index of handbooks.
• ECSS-E-HB-32-21A  Adhesive bonding handbook, 20 March 2011.
• ECSS-E-HB-32-24A  Buckling of structures, 24 March 2010.
• ECSS-E-HB-20-07A  Electromagnetic compatibility handbook, 5 September 2012.
• ECSS-E-HB-32-22A  Insert design handbook, 20 March 2011.
• ECSS-E-HB-32-20  Structural materials handbook, 20 March 2011.
• ECSS-E-HB-31-01  Thermal design handbook, 5 December 2011.
• ECSS-E-HB-32-23A  Threaded fasteners handbook, 16 April 2010.

Bicycles

• ISO 4210-x  Cycles. Safety requirements for bicycles.
• ISO 4210-1  ... Terms and definitions, July 2014.
• ISO 4210-2  ... Requirements for city and trekking, young adult, mountain and racing bicycles, September 2015.
• ISO 4210-3  ... Common test methods, July 2014.
• ISO 4210-4  ... Braking test methods, July 2014.
• ISO 4210-5  ... Steering test methods, July 2014.
• ISO 4210-6  ... Frame and fork test methods, September 2015.
• ISO 4210-7  ... Wheels and rims test methods, July 2014.
• ISO 4210-8  ... Pedal and drive system test methods, July 2014.
• ISO 4210-9  ... Saddles and seat-post test methods, July 2014.
• ISO DIS 4210-10  ... Safety requirements for electrically power assisted cycles (EPACs), November 2019.

GRP piping

• BS 6464 (withdrawn November 2017)  Specification for reinforced plastics pipes, fittings and joints for process plants, September 1984.
• BS 7159 (withdrawn November 2017)  Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites, October 1989.
• BS EN 1115-1 (superseded by BS EN 14364)  Plastics piping systems for underground drainage and sewerage under pressure -
  Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 1: General, June 2001.
• BS EN 14364  Plastics piping systems for drainage and sewerage with or without pressure -
  Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints, March 2013.
• HSE  A guide to the Pipelines Safety Regulations 1996, 1996 reprinted 2012.
• HSE  Temporary/permanent pipe repair - Guidelines, 2001.
• ISO 14692-x  Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping
• ISO 14692-1  ... Vocabulary, symbols, applications and materials, August 2017.
• ISO 14692-2  ... Qualification and manufacture, August 2017.
• ISO 14692-3  ... System design, August 2017.
• ISO 14692-4  ... Fabrication, installation and operation, August 2017.
• ISO 24817  Petroleum, petrochemical and natural gas industries - Composite repairs for pipework -
  Qualification and design, installation, testing and inspection, August 2017.

GRP tanks and vessels

• BS EN 976-x  Underground Tanks of Glass-Reinforced Plastics (GRP) -
  Horizontal Cylindrical Tanks for the Non-Pressure Storage of Liquid Petroleum Based Fuels.
• BS EN 976-1  ... Requirements and test methods for single wall tanks, 1997.
• BS EN 976-2  ... Transport, handling, storage and installation of single wall tanks, 1997.
• BS EN 977  Underground Tanks of Glass-Reinforced Plastics (GRP) - Method for one side exposure to fluids, 1988.
• BS EN 978  Underground Tanks of Glass-Reinforced Plastics (GRP) - Determination of factor Alpha and factor Beta, 1997.
• BS EN 13121-x  GRP tanks and vessels for use above ground (replaces BS4994)
• EN 13121-1  ... Raw materials. Specification conditions and acceptance conditions, October 2003.
• EN 13121-2  ... Composite materials; Chemical resistance, October 2003.
• EN 13121-3  ... Design and workmanship, April 2016.
• EN 13121-4  ... Delivery, installation and maintenance, January 2005.
• BS EN 13280  Specification for glass fibre reinforced cisterns of one-piece and sectional construction,
  for the storage, above ground, of cold water, October 2001 (replaces BS7491).
• ISO 12917-x  Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks
• ISO 12917-1  ... Manual methods, March 2017.
• ISO 12917-2  ... Internal electro-optical distance-ranging method, September 2002.

Pressure vessels

• American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code
• ASME 2017 Boiler and Pressure Vessel Code: an international code
• BPVC Section X  Fiber-Reinforced Plastic Pressure Vessels
• ISO 11119-x  Gas cylinders - Refillable composite gas cylinders and tubes - Design, construction and testing.
• ISO 11119-1  ... Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450L, August 2012.
• ISO 11119-2  ... Fully wrapped fibre reinforced composite gas cylinders and tubes uo to 450L with load-sharing metal liners, July 2012.
• ISO 11119-3  ... Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners, April 2013.
• ISO 11119-4  ... Fully wrapped fibre reinforced composite gas cylinders up to 150L with load-sharing welded metal liners, February 2016.

Small craft

• ISO 12215-x  Small craft. Hull construction and scantlings.
• ISO 12215-1  ... Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate, September 2000.
• ISO 12215-2  ... Materials. Core materials for sandwich construction, embedded materials, May 2002.
• ISO 12215-3  ... Materials. Steel, aluminium alloys, wood, other materials, May 2002.
• ISO 12215-4  ... Workshop and manufacturing, May 2002.
• ISO 12215-5  ... Design pressures for monohulls, design stresses, scantling determination, May 2019.
• ISO 12215-6  ... Structural arrangements and details, April 2008.
• ISO FDIS 12215-7  ... Determination of loads for multihull and their scantlings, April 2019.
• ISO 12215-8  ... Rudders, May 2009.
• ISO 12215-9  ... Sailing craft appendages, June 2012.
• ISO FDIS 12215-10  ... Rig loads and rig attachments in sailing craft, November 2019.