FPCM16 header

Day 1 morning: Tuesday 14 January 2025
Keynote: Suresh G Advani (University of Delaware, USA)
Session I: Flow Modeling & Simulations I
Chair: Pascal Hubert, Simon Bickerton

TimePresentation & Author(s)
07:30Registration (all/mingle)
08:20-08:30Welcome: Rehan Umer
08:30-09:20Keynote: Role of modeling and simulation in the development and application of digital twin for liquid composite molding processes
Suresh G Advani, University of Delaware, USA
09:20-09:40Multiscale impregnation modeling using deep learning
Baris Caglar, TU Delft, Netherlands
09:40-10:00Finite element-assisted analysis of through-thickness impregnation behavior of polymer composite reinforcement textiles
Miro Duhovic, Leibniz Institute, Germany
10:00-10:30Coffee Break
10:30-10:50Improved finite volume multiphase flow simulation model for strongly inhomogeneous porous media
Christof Obertscheider, University of Applied Sciences Wiener Neustadt, Austria
10:50-11:10Stokes-Darcy fluid flow simulations within 3D interlock fabrics with capillary effects
– experimental input influence and comparison with experimental output

Pierre-Jacques Liotier, IMT Mines Ale, France
11:10-11:30Numerical simulation for compression moulding of carbon fibre sheet moulding compound
Connie Qian, University of Sheffield, UK
11:30-11:50Comparison of different dual scale methods for numerical permeability prediction
Tim Schmidt, Leibniz Institute, Germany
11:50-12:10An FE implementation of coupled resin flow and preform deformation linked to residual stress and cure-induced distortion analysis in Abaqus
Mohammad Rouhi, RISE Research Institutes of Sweden
12:10-12:30The application of a numerical tool for smart in-situ sensing of defect features in large scale infusions
Jack Davies, University of Bristol, UK
12:30-13:30Lunch

Day 1 afternoon: Tuesday 14 January 2025
Keynote: Yu Dong (Curtin University)
Session II: Processing using Additive and AFP
Chair: Kamran Khan, Miro Duhovic

TimePresentation & Author(s)
13:30-14:20Keynote: Mechanical Behaviour of Recyclable 3D Printed Polymer Composites Using Digital Light Processing
Yu Dong, Curtin University, Australia)
14:20-14:40Numerical simulation of large format additive manufacturing to enhance layer adhesion and reduce warpage in glass fiber reinforced ABS structures
Pablo Castello, Universitat Politècnica de València, Spain
14:40-15:00Simulation-driven quality assurance for laser assisting automated fiber placement processing of carbon fiber thermoplastic composites
Samuel Requile , Coriolis Composites, France
15:00-15:30Coffee Break
15:30-15:50Fully biodegradable polymeric composites for FDM 3D printing
– effects of reinforcing particle size and volume on flow and properties
alib
Chamil Abeykoon, University of Manchester, UK
15:50-16:10Considerations for layer-by-layer manufacturing with snap-cure thermoset prepregs
Axel Wowogno, University of Bristol, UK
16:10-16:30Original concepts of ply drop configurations for improved mechanical performance in tapered composites
Erfan Kazemi, Imperial College London, UK
16:30-16:50On-line pneumatic compaction system for consolidation on a powder polymer towpreg processing line
Hanisa Hasrin, Sheffield University, UK
16:50-17:10Investigating the energy absorption performance of additively manufactured bioinspired honeycomb structures
Muhammad Khizer Ali Khan, Khalifa University, UAE
17:10-17:30Reconstruction-based approach for enhancing filament winding inspection in hydrogen storage tank manufacturing
Samee Ullah Khan, Khalifa University, UAE

Day 2 morning: Wednesday 15 January 2025
Keynote: Simon Bickerton (The University of Auckland, New Zealand)
Session I: Flow in Sustainable Manufacturing
Chair: Yu Dong, David May

TimePresentation & Author(s)
08:00all/mingle
08:30-09:20Keynote: Plasma enhanced processing of polymer-polymer and fibre-polmer thermoplastic composites
Simon Bickerton, The University of Auckland, New Zealand
09:20-09:40Process optimization of composite pressure vessel using liner-assisted resin transfer molding of reactive thermoplastic resin
Biltu Mahato, Luxembourg Institute of Science and Technology, Luxembourg
09:40-10:00Sustainable composite materials for marine applications
Mohammed Loukil & Marie Jonsson, Linkoping University, Sweden
10:00-10:30Coffee Break
10:30-10:50Formulating and multi-processing of thermally conductive peek composites with selective integration of ceramic fillers for advanced aerospace applications
Burcu Sanar Okan, Sabanci University, Turkey
10:50-11:10Influence of the surface modification of a basalt fiber on the in-plane permeability at two scales: the tow and the fibrous preform
Pierre-Jacques Liotier, IMT Mines Ale, France
11:10-11:30Vacuum-assisted through-thickness melt impregnation of thermoplastic composites
Martin Lambrechtse-Reid, The University of Auckland, New Zealand
11:30-11:50Enhancing sustainability in large format additive manufacturing: real-time rheological monitoring and in-situ flow control for recycled ABS-GF
Javier Bas Bolufer, Universitat Politècnica de València, Spain
11:50-12:10Mechanical and self-sensing performance of selectively laser sintered CNT/PA12 honeycombs subject to monotonic and cyclic compression
Andreas Schiffer, Khalifa University, UAE
12:10-12:30Deconsolidation in thermoplastic laminates under infrared radiations
Regis Vaudemont, Luxembourg Institute of Science and Technology, Luxembourg
12:30-13:30Lunch/Poster Session

Day 2 afternoon: Wednesday 15 January 2025
Keynote: Veronique Michaud (EPFL, Lausanne, Switzerland)
Session II: Flow Modeling & Simulations II
Chair: Baris Caglar, Pierre-Jacques Liotier

TimePresentation & Author(s)
13:30-14:20Keynote: Energy efficient processing of composites by frontal polymerization of epoxies
Veronique Michaud, EPFL, Lausanne, Switzerland
14:20-14:40Machine learning based flow velocity field prediction in large 3D fibrous microstructures
Stefano Cassola, Leibniz-Institute, Germany
14:40-15:00Machine learning proposal for fiber orientation prediction in large format extrusion additive manufacturing
Cesar Garcia, Universitat Politècnica de València, Spain
15:00-15:30Coffee Break
15:30-16:10Lab Tours
16:10-16:30Numerical parametric study of a wavy thin channel thermoplastic melt impregnator for carbon fibre reinforced prepreg production
Maximilain Pitto, The University of Auckland, New Zealand
16:30-16:50Multiphysical process modeling approach for vacuum bag only prepregs: integration of resin flow, consolidation and heat transfer
Hatice Sas, Sabanci University, Turkey
16:50-17:10A rate dependent visco-hyperelastic model for compaction response of 3D woven fabric
Siddhesh Kulkarni, Khalifa University, UAE
17:10-17:30Manufacturing, characterization, and modeling of graphene-based multifunctional composites
Noora Alahmed, Khalifa University, UAE
18:30Banquet (Fairmont Hotel Abu Dhabi)

Day 3 morning: Thursday 16 January 2025
Keynote: Prasad Potluri (University of Manchester)
Session I: Impregnation & Flow
Chair: SV Lomov, Elena Syerko

TimePresentation & Author(s)
08:00all/mingle
08:30-09:20Keynote: Textile preforming optimised for infusion with nanoparticles
Prasad Potluri, University of Manchester, UK
09:20-09:40Hydrogen permeability of carbon fiber reinforced casted polyamide 12
Patrick Nowakowski, Faserinstitut University of Bremen, Germany
09:40-10:00An integrated permeability testing device for textile reinforcements under high temperature
Bin Yang, Wuhan University of Technology, China
10:00-10:30Coffee Break
10:30-10:50Distributed fibre optic sensing for real-time monitoring of VARTM manufacturing and processing of composite laminates
James R. Davidson, Sheffield University, UK
10:50-11:10Dynamic wetting of polymers on fibers: effect of temperature
Monica Pucci, IMT Mines Ale, France
11:10-11:30Modelling the resin flow through fibres during resin transfer moulding
Shanthar Rajinth, University of Manchester, UK
11:30-11:50Flow front monitoring and permeability analysis of pneumatically spliced woven fabrics
Fayyad Amod, Sheffield University, UAE
11:50-12:10Performance Evaluation of discarded aerospace prepregs for alternate applications
Sanjeev Rao, Khalifa University, UAE)
12:10-12:30Bonding performance of plasma-treated LDPE/GNP liners with CFRP for high-pressure hydrogen storage systems
Jabir Ubaid, Khalifa University, UAE
12:30-13:30Lunch

Day 3 afternoon: Thursday 16 January 2025
Keynote: David May (Faserinstitut, University of Bremen, Germany)
Session II: Reinforcement Permeability
Chair: Suresh Advani

TimePresentation & Author(s)
13:30-14:20Keynote: Composite process development: studies on permeability as the basis for a holistic research methodology
David May, Faserinstitut, University of Bremen, Germany
14:20-14:40Iso-standardized permeability test requirements are on the limit of the achievable measurement precision
SV Lomov, KU Leuven, Belgium
14:40-15:00A reference porous medium for calibrating through thickness permeability setup
Mostafa Nikzad, Swinburne Instutute of Technology, Australia
15:00-16:15Benchmarking and Standardization
Stepan Lomov, Veronique Michaud, David May, Tim Schmidt, Elena Syerko, Ana Yong
16:15Abu Dhabi Tour

Created by John Summerscales on 07-Apr-2025 and updated on 07-Apr-2025 17:41. Terms and conditions. Errors and omissions. Corrections.