International theses and dissertations on composite materials and structures (to circa 1994, compiled by John Summerscales)

This bibliography of theses and dissertations is arranged by alphabetical sequence of the author surnames, with chronological subdivision within groups of of common surnames.  The list is intended to update:

The combined coverage includes data from the following sources:

These bibliographies are provided as a convenient first reference point and are not claimed to be exhaustive.  They include all known bibliographic detail up to circa 1994, when I no longer had the time to collect the information.  Whilst every effort has been made to provide an accurate record, the compiler cannot accept any responsibility for costs or inconvenience incurred by errors or omissions included in these lists.  Most American and some European doctoral dissertation titles contained here are published with the permission of University Microfilms International, publishers of Dissertation Abstracts International (copyright (c) variously 1973-1990 by UMI) and may not be reproduced without their prior permission.  Permission to reproduce titles from the other sources listed above is also gratefully acknowledged.

Copies of the theses listed in this bibliography are normally available for loan from the institution at which the research was undertaken.  British doctoral theses are routinely deposited at the British Library Document Supply Centre and have a reference number 'Dxxxxx/yy'. American doctoral theses are normally available from University Microfilms International, and have a reference number 'DAyyxxxxx'.  Reports prepared for, or distributed by NASA, NTIS or US DoD have reference numbers 'Nyy-xxxxx' or 'AD (A)xxx xxx'.

In the previous paragraph 'yy' is a number indicating the year ('87' for 1987) and 'xxxxx' is a reference number in the sequence.  An exclamation mark '!' indicates uncertainty about a thesis date.  Angle brackets <>: indicate that a title is unconfirmed.  Square brackets [] indicate the translation of a title.

Key to the abbreviations
 Abbreviation  Establishment
 AFIT  Air Force Institute of Technology, WPAFB, OH 45433, USA.
 BLDSC  British Library Document Supply Centre.
 CHE  ... College of Higher Education
 CSULB  California State University at Long Beach, CA 90840, USA.
 CWRU  Case Western Reserve University, Cleveland, OH 44106, USA.
 EMP  Ecole des Mines de Paris, BP87, 91003 Evry Cedex, France.
 ENSET  Ecole Normale Superieure de l'Enseignement Technique, 61 av.du President Wilson, 94320 Cachan, France.
 ETH  Eidgenoessische Technische Hochschule, 8092 Zurich (CH).
 GWU  George Washington University, Washington, DC 20052, USA.
 ICST&M  Imperial College of Science, Technology & Medicine, London, UK.
 IIT  Indian Institute of Technology (various locations).
 ISVR  Institute of Sound and Vibration Research, Southampton, UK.
 IT  ... Institute of Technology
 KAIST  Korea Advanced Institute of Science and Technology, Seoul.
 KIHWV  Katholieke Industriele Hogeschool West Vlaanderen, B8400 Oostende, Belgium.
 KTH  Kungliga Tekniska Hoegskolan, S-10044 Stockholm, Sweden.
 KUL  Katholieke Universiteit Leuven, 3000 Louvain, Belgium.
 MIT  Massachusetts Institute of Technology, Cambridge, MA 02139.
 NCCH  University of North Carolina at Chapel Hill, NC 27514, USA.
 NCSU  North Carolina State University at Raleigh, NC 27695, USA.
 NLC  National Library of Canada, Ottawa, Ontario K1A 0N4, Canada.
 NMIMT  New Mexico Institute of Mining and Technology, NM 87801.
 NPS  Naval Postgraduate School, Monterey, CA 93943, USA.
 NTHU  National Tsing Hua University, Hsin-Chu, Taiwan, 30043 ROC.
 NWU  Northwestern University
 PI  ... Polytechnic Institute
 PINY  Polytechnic Institute of New York, Brooklyn, NY 11201, USA.
 RPI  Rensselaer Polytechnic Institute, Troy, NY 12181, USA.
 RWTH  Rheinisch-Westfalischen Technischen Hochschule, 5100 Aachen.
 SDSMT  South Dakota School of Mines and Technology, SD 57701, USA.
 SU  ... State University
 SUNY  State University of New York, Albany, NY 12203 /Buffalo, NY 14260 /Stony Brook, NY 11790.
 TA&MU  Texas A & M University, College Station, TX 77843, USA.
 UCLA  University of California at Los Angeles, CA 90024, USA.
 UCSD  University of California at San Diego, CA 92093, USA.
 UEA  University of East Anglia, Norwich, Norfolk, NR4 7TJ, UK.
 UIUC  University of Illinois at Urbana-Champaign, IL 61801, USA.
 UMIST  University of Manchester Institute of Science & Technology.
 UWIST  University of Wales Institute of Science and Technology, UK.
 VPI&SU  Virginia Polytechnic Institute & State University, VA 24061.
 VUB  Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels.
 WAMO  Washington University, St.Louis, Missouri 63130, USA.
 WAWA  University of Washington, Seattle, Washington 98195, USA.
 WPAFB  Wright-Patterson Air Force Base.
  1. Parviz Aalipour
    Analysis and design of space station using air-supported forms and composite materials
    PhD, Brigham Young, 1990. DA9112807. DAIB 51(12)6010.
  2. Olav Aamlid
    A nonlinear finite element based on free formulation theory for analysis of sandwich structures
    DrIng, University of Trondheim - Norway, 1993.  AADC359404  DAIC55(3)963
  3. Ahmed Abada
    Processing, compatibility and oxidation of diboride-reinforced oxide matrix composites for ultrahigh-temperature applications
    PhD, CWRU, 1990. DA9035265. DAIB 51(12)6047.
  4. Jehad Fawaz Abbas
    Nonlinear flutter of composite panel under aerodynamic heating
    PhD, Wayne State University, 1993.  AAD9418117  DAIB55(2)554
  5. GM Abbott
    The nonlinear bending behaviour of plain weave fabrics.
    PhD, Leeds, 1967.
  6. Joao Elias Abdalla Filho
    Qualitative and discretization error analysis of laminated composite plate models
    PhD, (no university given), 1992.  AAD9318092  DAIB54(2)976
  7. Mohamed Farag Abdel-Khalk
    The analysis of sandwich beams and plates
    PhD, Salford, 1990. D94594. DAIB 52(10)5412.
  8. MHA Hamdi Abdel-Mohsen
    Hybrid experimental-numerical stress analysis
    PhD, Wisconsin: Madison, 1986. DA8605689.
  9. Ahmad Shehadeh Abdelnaser
    Random vibrations of composite beams and plates
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9312867  DAIB54(2)925
  10. EMY Abdin
    Dynamic properties of some carbon fibre reinforced plastics
    PhD, Southampton, October 1982. D46216/83.
  11. H Abe
    Instrumented impact testing of silicon carbide.
    PhD, Pennsylvania SU, 1976. DA7629611.
  12. DA Abercrombie
    The high temperature creep behaviour of a fibre reinforced epoxy composite
    Masters, California: Davis, 1978.
  13. PHP Abeysinghe
    The fracture toughness of a polyester resin after immersion in aqueous liquids
    PhD, CNAA: Kingston, June 1980. D37655/81.
  14. OCB Abhat
    Dynamic behaviour of laminated composite cylindrical shells under initial stresses
    PhD, S.Methodist, 1971. DA7206349.
  15. SA Abi-Shaheen
    Buckling of composite shells of revolution
    PhD, London: QMC, February 1979.
  16. Mohamed Aboussaleh
    Fatigue of composite materials subjected to random loading
    Fatigue des materiaux composites soumis a des chargements aleatoire
    MScA, Ecole Polytechnique Montreal, 1993.  AADMM90037 MA33(2)601. MA33(2)628.
    >>> K Abraham Jacob, see KA Jacob.
  17. SS Abramchuk
    Diagnostics of elastic characteristics and parameters of the heterostructure of cylindrical shells made of reinforced plastics
    Dissertation, Tech.Sci-Riga, 1979.
  18. KR Abu-Arja
    Static analysis of laminated fibre reinforced plates and shells with shear deformation
    PhD, Utah, 1987. DA8706391.
  19. GAFR Abu-Farsakh
    Analytical and experimental study of buckling of composite shells
    PhD, London: QMC, December 1983.
  20. Alias Abuhasan
    Residual stress in silicon carbide whisker reinforced aluminium oxide ceramic composites
    PhD, Denver, 1990. DA9030075. DAIB 51(6)3072.
  21. TMN Abu-Mansour
    Through-thickness properties of glass reinforced plastic laminate
    MSc, UMIST, 1981. D75809/87.
  22. ML Accorsi
    Micromechanically based constitution relations for periodic composites with elastic, elastoplastic and nonlinear creep material behaviour
    PhD, NWU, 1986. DA8610504.
  23. A Acharhabi
    The calculation of thick plates by three-dimensional finite elements to number of nodes and variable form
    These de 3eme cycle, UT Compiegne/ENSTA, 28 June 1978.
  24. J Albert Ackerman
    End effects in laminated beams
    PhD, Texas A & M University, 1994.  AAD9432633.  DAIB55(7)2838
    >>> JGD Acquisto, see JG D'Acquisto.
  25. Ricardo Luis Actis
    Hierarchic models for laminated plates
    DSc, Washington University-MO, 1991. DA9223569. DAIB 53(3)1562.
  26. AE Acton
    The fatigue of graphite fibre reinforced thermoset and thermoplastic matrices
    PhD, MIT, 1986.
  27. IS Adamovich
    Optimisation of shells of revolution of reinforced plastics with properties varying with orientation
    Dissertation, Riga, 1977.
  28. AG Adamovich
    Predicting the long term strength of organic microplastic in uniaxial tension
    Dissertation, Tech.Sci-Riga, 1978.
  29. P Adams
    Fracture properties of three-phase composite materials
    MSc, UMIST, 1975!.
  30. DS Adams
    Characteristics of thermally induced transverse cracks in graphite/epoxy composite laminates
    Masters, VPI&SU, 1983.
  31. KM Adams
    Effects of cut-outs on strength of GRP for naval ship hulls
    Masters, MIT, June 1986. AD A173 291.
  32. LG Adams
    Tensile impact testing of unidirectional polymer matrix
    Masters, Wyoming, 1986.
  33. B Adams
    Strain relaxation measurements of borosilicate glass at elevated temperature by holographic interferometry
    Masters, Florida, 1987.
  34. Kurt Louis Adams
    Permeability characterisation of engineering fabrics
    PhD, Princeton, 1989. DA8908046. DAIB 50(1)263.
  35. Daniel O'Hare Adams
    Effects of layer waviness on compression-loaded thermoplastic composite laminates
    PhD, VPI&SU, 1991. DA9214567. DAIB 53(2)925.
  36. Mary Elizabeth Adams
    Processing of thermoplastic matrix-carbon fibre composites
    PhD, Clarkson, 1992. DA9222807. DAIB 53(3)1494.
    >>> DF Adams, see DS Cairns.
  37. AB Adeoye
    Failure of filament wound glass fibre reinforced epoxy resin tubes under biaxial loading
    MSc, UMIST, 1979.
  38. RW Aderholt
    A scattered light photoelastic analysis of interlaminar matrix stresses in fibrous composite models
    PhD, Georgia IT, 1973. DA7416128.
  39. Mohamed Reda Adimi
    Fatigue loading of pultruded unidirectional composite materials
    Comportement en fatigue de materiaux composites unidirectionnels pultrudes
    MScA., Ecole Polytechnique Montreal - Canada, 1992.  AADMM86425  MA32(5)1457
  40. DW Adkins
    Strength and mechanics of bonded scarf joints for repair of composite materials
    PhD, Delaware, December 1982. DA8309886.
  41. A Adler
    Permeability studies on cellulosic fibre composites.
    Masters, New York, 1968.
  42. SG Advani
    Prediction of fibre orientation during processing of short fibre composites
    PhD, UIUC, 1987. DA8802973.
  43. L Afanasieff
    Study of the interface locations between dissimilar materials and other aspects of a composite midship section
    Masters, MIT, 1967.
  44. DD Afshar
    Comparison of monotonic and fatigue behaviour of IM6 and AS4 graphite fibre reinforced resin matrix composites
    Masters, Missouri-Columbia, 1986.
  45. Payman Afshari
    Finite element analysis of composite plates by use of modified complementary energy principle
    PhD, University of Illinois at Chicago, 1992.  AAD9310117  DAIB53(12)6499
  46. BD Agarwal
    Low cycle fatigue behaviour of glass fibre reinforced plastics
    MS, Illinois IT, 1970.
  47. PK Agarwal
    Viscoelastic properties and die swell of filled polymer melts
    MS, Washington University-MO, 1972.
  48. BD Agarwal
    Micromechanics analysis of composite materials using finite element methods
    PhD, Illinois IT, May 1972. DA7303619.
  49. BL Agarwal
    Optimisation of a corrugated stiffened composite panel under uniaxial compression
    Masters, Cincinnati, 1973.
  50. BL Agarwal
    Minimum weight design of axially compressed unstiffened and stiffened composite cylinders
    PhD, Cincinnati, 1975. DA7600001.
  51. N Agarwal
    Implementation of a laminated composite flat shell finite element
    Masters, RPI, 1983.
  52. Vivek Agarwal
    The role of molecular mobility in the consolidation and bonding of thermoplastic composite materials
    PhD, Delaware, June 1991. CCM-REPT-91-39. DA9206348. DAIB 52(9)4918
  53. Sirish Agarwal
    Analysis of impingement mixing behaviour of highly-filled suspensions
    PhD, Clarkson University, 1995, AADAAI9610731, DAIB56(12)6899.
  54. Rakesh K Agarwal
    Constitutive modeling of woven-fabric composites for concurrent design
    PhD, University of Maryland, 1992.  AAD9315592  DAIB54(1)440
  55. D Agg
    The flow of polymeric fluids
    PhD, Cambridge, 1987. ASLIB 38(3)6232.
  56. SM Aggarwal
    Characterisation of acoustic emission signals generated by degradation of advanced composite materials
    Masters, Washington SU, 1988.
  57. H Aggour
    Finite element analysis of a laminated composite plate under circularly distributed impact load
    Masters, Florida, 1986.
  58. Hanni Aggour
    An axisymmetric cubic finite element for laminated anisotropic cylindrical shells
    PhD, University of Illinois at Urbana-Champaign, 1994.  AAD9416334  DAIB55(1)6642
  59. M Aghajanian
    Effect of phase connectivity on the mechanical properties of a ceramic composite
    Masters, Pennsylvania SU, 1986.
  60. V Agopyan
    The preparation of glass reinforced gypsum by premixing and its properties under humid conditions
    PhD, London: Kings, 1982.
  61. A Agrawal
    Structure kinetics & properties of epoxy and thermotropic polymers
    ScD, MIT, 1986.
  62. Raj Kumar Agrawal
    Effects of microwave processing on the fibre-matrix interphase in composites
    MS, Michigan SU, 1988. DA1333320. MA 27(1)126.
  63. Raj Kumar Agrawal
    Adhesion mechanisms of polyurethanes to glass surfaces
    PhD, Michigan State University, 1994.  AADAAI9524886  DAB56(3)1566
  64. JP Aherne
    Extent of cure vs modulus, density absorption in glassy epoxies
    Masters, Princeton, 1982.
  65. R Ahlroth
    Work hardening tendency of pure, alloyed and fibre reinforced nickel at elevated temperatures
    Lic.thesis, Tampere UT-Finland, 1976.
  66. CA Ahlstrom
    Processing and characterisation studies of PEEK matrix composites
    MS, University of Washington-WA, 1987.
  67. Carla Ahlstrom
    Interface fibre de verre/matrice polyepoxy: introduction d'une interphase a proprietes controlees
    [Glass fibre/polyepoxy interface: introduction of an interphase of controlled properties]
    Doctorate, INSA Lyon, 1991. DA-C199328. DAIC 52(4)664.
  68. S Ahmad
    Pressure vessel ends in reinforced plastics
    MSc, UMIST, 1978
  69. Faiz Ahmad
    A new route for fibre management in metal matrix composites
    PhD, Brunel, October 1990. DX93603. DAIB 52(6)3233.
  70. Reza Ahmadian
    Fiber-reinforced structural dynamics modification
    PhD, University of Mississippi, 1996, AAD9635912, DAIB57(7)4648.
  71. A Ahmadi
    Theoretical and experimental studies on the creep behavior of a graphite-epoxy composite material
    PhD, Drexel, 1974.
  72. AM Ahmad Mustapha and CK Liew
    Shear diffusion in sandwich specimens having glass reinforced plastic face plates with paper honeycomb cores
    BSc, Bristol, June 1981. BU-270. N82-19327.
  73. ZB Ahmad
    Deformation mechanism maps for polymers
    PhD, Cambridge, 1986-7. DX59168.
  74. M Ahmad
    Shear lag effect in composite box girders
    PhD, Wales: UC Cardiff, 1989. DX90968.
  75. I Ahmed
    Stress analysis of a GRP car road wheel
    MSc, London: ICST&M, September 1983.
  76. S Ahmed
    Bond and slip of fibreglass and steel reinforcement in concrete
    Masters, SDSMT, 1988.
  77. Mohammad Mesbahuddin Ahmed
    Electrochemical impedance spectroscopy to monitor degradation of carbon fiber reinforced polymer composites subjected to simulated ocean environment
    MS, Florida Atlantic University, 1993.  AAD1355118  MA32(3)1042
  78. Nesar Uddin Ahmed
    Higher order analysis of laminated composites based on P-version of the finite element method
    PhD, Vanderbilt, 1989. DA8919674. DAIB 50(6)2531.
  79. Kyujong Ahn
    Thermosetting matrix-based composite impregnation science and engineering
    PhD, University of Washington-WA, 1990. DA9108431. DAIB 51(11)5454.
  80. TCT Ah-Teck
    Formability of long glass fibre reinforced polypropylene sheets
    PhD, Loughborough, August 1986. DX77922.
  81. Kim Ainsworth
    Low velocity transverse impact of filament wound E-glass/epoxy resin pipes
    PhD, Liverpool, 1990. DX96407. DAIB 53(3)1509.
  82. S Aivazzadeh
    Elements finis d'interface. Application aux assemblages colles et structures stratifies
    [Interface finite elements used for adhesive joints and laminates]
    D.Ing, UT Compiegne, 1984.
  83. Manoj Ajbani
    Fiber-reinforced and hybrid particle toughened composites
    PhD, University of Akron, 1995.  AADAAI9533090  DAB56(8)4344
  84. A Akbarzadeh
    Stress analysis of composite materials by the hybrid finite element method
    PhD, Wyoming, 1975. DA7522327.
  85. Omer M Akdag
    An experimental study of the enhancement of thermal conductivity of fibre reinforced polymer matrix composite materials
    MS, Nevada: Reno, 1991. MA1346770. MA 30(2)365.
  86. MHM Akhbarizadeh
    Oxidised cotton as a fibre in composites of phenol formaldehyde
    Masters, Pittsburgh SU, 1979.
  87. RM Akhunov
    Studies of the kinetics of damage and macrofailure of fibrous composite materials by the method of acoustic emission.
    Doctorate, Leningrad, 1982.
  88. M Akinc
    Effect of drawing atmosphere on surface characteristics of glass fibres
    PhD, Iowa SU, 1977. DA7729822.
  89. Robert Benjamin Akins
    Dielectric investigation of double glass transitions in polymers
    PhD, CWRU, 1991. DA9216238. DAIB 53(1)351.
  90. Adnan Aksoy
    Mode II interlaminar fracture toughness of interleaved composite materials
    MSE, Florida Atlantic, 1990. DA1339801. MA 28(4)626.
  91. HR Al-Agha and DC Velupillai
    Carbon fibre reinforced plastic sandwich beam construction in the main wing structure of a man powered aircraft
    BSc, Bristol, May 1976. BU-197. N77-17039.
  92. M Alam
    Utilisation of scrap fibreglass circuit boards
    Masters, Lowell, 1975.
  93. N Alam
    Vibration and damping analysis of multilayered plates and shells
    PhD, IIT Delhi, 1980.
  94. MA Al-Ausi
    Effect of fibre reinforcement on the punching shear resistance of flat plate subjected to unbalanced moment
    PhD, Sheffield, December 1982. DX88926.
  95. BV Alavandi
    Static and dynamic response of plates and shells.
    PhD, Melbourne-Australia, 1985. DA8524253.
  96. Kathryn M Albert
    Analysis of thermal microcracking in graphite/polyimide composite materials: a study of fibre volume effects
    MS, Lowell, 1988. DA1333781. MA27(1)141.
  97. FP Alberti
    Effects of finishing agents on fibreglass reinforced plastics
    Masters, Worchester PI, 1968.
  98. WJ Albertus
    Analysis of heat transfer in a bushing for production of glass fibres
    Masters, Purdue, 1982.
  99. SL Albright
    An analysis of the strain energy field of a composite coupon in dynamic tensile loading
    Masters, TA&MU, 1974.
  100. JR Albritton
    Fracture of discontinuous metal matrix composite materials
    Masters, Clemson, 1988.
  101. HA Al-Dafiry
    Studies in the effectiveness of fibres as shear reinforcement
    Masters, New Mexico SU, 1986.
  102. Constanta Adelina Alecu
    A fundamental study related to fiber impregnation for composites
    MEng, McGill University, 1994.  AADAAIMM94257 MA33(4)1318
  103. PE Alei
    Improvement of mechanical properties of polymers by molecular orientation
    Masters, MIT, 1984.
  104. Philip Eugene Alei
    Manufacturing analysis of axisymmetric composite structures
    PhD, California: Berkeley, 1990. DA9126465. DAIB 52(4)2250.
  105. CJ Aleong
    Experimental determination of residual stresses in filament wound composite rings
    Masters, Ottawa, 1986.
  106. Allen Alexander
    Stress continuity with penalty function analysis of axisymmetric composite structures
    MSE, University of Alabama in Huntsville, 1992.  AAD1350638  MA31(2)144  MA31(2)888
  107. Christopher Alexander
    Analysis of interlaminar stresses in symmetric and unsymmetric laminates under various loadings
    MS, University of Texas, 1992.  AAD1350166  MA31(1)422
  108. E Alf
    Untersuchungen zum verhalten ausgewahlter unter schwingender beanspruchung
    [Investigation of the behaviour of selected plastics under vibratory stresses]
    DIng, RWTH Aachen, 15 December 1972. DS7209.
  109. II Alfirevich
    Stress concentrations factors in anisotropic material
    Masters, Illinois IT, 1968.
  110. RJ Alfrey
    Elastic wave propogation in laminated composites: a comparative study
    PhD, Michigan, 1977. DA7717936.
  111. DB Alfson
    Composite material point stress analysis
    Masters, Wichita SU, 1978.
  112. AM Al-Ghothani
    A unified approach to the dynamics of bending and extension of moderately thick laminated composite plates.
    PhD, Ohio SU, 1986. DA8625174.
  113. Naser Shafei Al-Huniti
    Micromechanical modeling of woven and textile composites
    PhD, University of Cincinnati, 1996, AAD9639165, DAIB57(7)4687.
  114. MA Ali
    Study of brittle fibre-brittle matrix composite system with particular reference to glass fibre reinforced gypsum
    MPhil, Surrey, 1972.
  115. SAR Ali
    Effect of fibre reinforcement on the punching shear of flat plates
    PhD, Sheffield, 1979.
  116. BS Aliabadi
    The effect of bond imperfections on the strength and dynamic response of laminated beams
    Masters, University of Washington-WA, 1987.
  117. Nidal M Alif
    Mechanical characterisation of woven fabric composite
    PhD, Florida Atlantic University, 1996, AAD9707531, DAIB57(7)6548.
  118. Mir Sajjad Ali-Khan
    Transverse joint and connection studies on a fibre-reinforced plastic bridge deck
    MS, CSULB, 1991. MA1345836. MA 30(1)128.
  119. AA Aliyu
    Delamination fracture toughness in composite materials.
    MS, Illinois IT @ Chicago, 1983.
  120. KM Al-Joubory
    Fibre-matrix reaction in composite ceramics based on alumina, titania and zirconia matrices
    PhD, Leeds, November 1989. D89051.
  121. QJ Al-Khayatt
    The structural properties of glass fibre reinforced plastics
    PhD, Aston, 1974. D14409/76.
  122. SR Allen
    Mechanical and morphological correlations in poly(paraphenylene benzobisthiazole)fibres
    PhD, Massachusetts, 1983. DA8317456.
  123. MW Allen
    Evaluation of the alternative manufacturing methods for bonding graphite/epoxy composites in single and double lap joints.
    Masters, MIT, 1985.
  124. HC Allen
    Investigation of the manufacturing process of carbon/epoxy laminate
    Masters, Utah, 1987.
  125. SA Allidina
    Analysis and design of fibre reinforced composite structural elements
    ME, Carleton-Ottawa, 1974.
  126. O Allix
    Delaminage des structures composites par la mecanique de l'endommagement
    [Delamination of composite structures through damage mechanisms]
    Thesis, Paris: P&M Curie, 1989.
  127. RE Allred
    Surface chemical modification of polyaramid filaments with amine plasmas
    Sc.D, MIT, February 1983.
  128. Satyanarayana Raju Alluri
    Ultrasonic characterization models for anomalies in fiber reinforced composite materials
    MS, Mississippi State University, 1994.  AAD1357730  MA33(1)242
  129. RA Al-Madani
    Dropped weight impact performance of GRP sandwich beams
    MSc, University of Liverpool, 1992
  130. AFAD Al-Marsoomi
    Factors affecting the durability of ceramic reinforced polymers
    MSc, Manchester, 1977.
    >>> SFMD Almeida, see SFM De-Almeida.
  131. JA Almouli
    Some aspects in the lamination of films, foils & fibrous materials
    Masters, PINY Brooklyn, 1967.
  132. H Alper
    Analytical and experimental studies of a glass reinforced plastic flexural member
    PhD, Virginia, 1976. DA7618087.
  133. JM Alper
    An investigation of the strength-life behaviour of a unidirectional graphite epoxy composite
    PhD, Drexel, 1981. DA8022847.
  134. AT Alptekin
    The dynamic mechanical properties of fibre assemblies.
    PhD, NCSU Raleigh, 1969. DA6916825.
  135. HH Al-Qarra
    The geometrically nonlinear analysis of sandwich panels
    PhD, Southampton, August 1986. D71896/87. DAIC 48/3289C. ASLIB 37(2)4141.
  136. IAM Al-Raheil
    Development of crystalline morphology in polyethylene and PEEK
    PhD, Reading, October 1987. DX76171. ASLIB 37(3)5184.
  137. RA Alrich
    Adapting glass reinforced plastics to a rigid frame design
    PhD, Michigan SU, 1958.
  138. HL Al-Sa'Edy
    The automatic sizing of fibres
    PhD, Southampton, 1981.
  139. V Alstaedt
    Hysteresismessungen zur charakterisierung der mechanisch dynamischen Eigenschaften von R-SMC
    [Hysteresis measurement to characterise the dynamic mechanical capacity of R-SMC]
    Thesis, Kassel, 1987.
  140. TCT Al-Teck
    Formability of long glass fibre reinforced polypropylene sheets
    MPhil, Loughborough, August 1986. ASLIB 39(2)4662.
  141. CE Altman
    Delamination failure of laminated composite materials: an experimental evaluation
    MS, RPI, August 1981.
  142. Brad Stewart Altman
    Dynamic deformations and analysis of a metal matrix composite
    PhD, University of California - San Diego, 1992.  AAD9303231  DAIB53(9)4764
  143. FM Altimore
    Fatigue behaviour of a concrete beam post tensioned with glass fibre reinforced plastic tendons
    Masters, NCSU Raleigh, 1987.
  144. SAA Altoulami
    Theoretical and experimental studies on the creep behaviour of a graphite/epoxy composite material
    PhD, Drexel, 1975. DA756122. N75-22383.
  145. AB Alvarado
    Swelling of polymers as a measure of crosslinking.
    Masters, Pittsburg SU, 1984.
  146. Jose Antonio Alvarez Dios
    Asymptotic theory of anisotropic and non-homogeneous linear elastic rods
    Teoria asintotica de vigas elasticas lineales anisotropas y no homogeneas
    PhD, Universidad de Santiago de Compostela - Spain, 1992.  AADC315655  DAIB54(4)1250
  147. FJ Alvarez-Vara
    Thermoelasticity of composite materials: a statistical approach
    PhD, Pennsylvania, 1972. DA7301354.
  148. CRS Alves
    Stress concentration in fibrous composite material
    MS, NPS Monterey, June 1975. N76-14208. AD A013 609.
  149. Marcelo Krajnc Alves
    Analysis of composite materials subjected to a unilateral contact condition with adhesion on the interface of its constituents
    PhD, Michigan, 1991. DA9135550. DAIB 52(7)3697.
  150. Jamil M Alwan
    Modelling of the mechanical behavior of fiber-reinforced cement based composites under tensile loads
    PhD, University of Michigan, 1994.  AADAAI9513289 DAB56(1)390
  151. Khalid Ibrahim Alzebdeh
    Computational methods in stochastic micromechanics of heterogeneous solids (Delaunay networks, composite materials)
    PhD, Michigan State University, 1994.  AADAA19512010  DAB55(12)5418
  152. AJ Amato
    Large deformation of non-shallow spherical sandwich shells
    Masters, Florida, 1967.
  153. M Amazouz
    <infrared thermography of composites>
    D.Ing, Nancy, 1987.
  154. SA Ambartsumyan
    Calculation of cylindrical shells with curvilinear generatrix
    Dissertation, USSR, 1946.
  155. SA Ambartsumyan
    Anizotropnyye sloistyye obolochki
    [Anisotropic laminar shells (problems of strength)]
    Dissertation, USSR, 1951.
  156. Anil Kumar Ambastha
    Pressure transient analysis for composite systems
    PhD, Stanford, 1989.  DA8912870.  DAIB 50(4)1627.
  157. Ramakrishna Reddy Ambati
    Study of fused silica matrix reinforced by silicon carbide fibers and whiskers
    MS, University of Lowell, 1992.  AAD1350586 MA31(2)843
  158. GA Ambur
    Material characterisation methods and structural analysis techniques for injection moulded glass reinforced thermoplastics
    Masters, RPI, 1987.
  159. Nouredine Amdouni
    Caracterisation et role d'une interphase elastomere au sein de materiaux composites polyepoxyde/renfort de verre
    [Characterization and role of an elastomer interphase in glass (particle or fibre) reinforced epoxy composite materials]
    DE, INSA Lyon, 1989. DA-C110817. DAIC 51(1)113.
  160. FL Ames
    Buckling and postbuckling behaviour of a large aspect ratio orthotropic plate under combined loadings
    Masters, MIT, 1973.
  161. William Ames
    Dry sliding wear of aluminium-silicon matrix composites with carbon fibre or graphite/silicon carbide reinforcement
    MSc.A, University of Windsor, 1994.  AADAAIMM93252  MA33(4)1318
  162. GM Amin
    An investigation of friction and wear properties of some plastics and cotton fibre reinforced polyester
    MSc, Cairo, 1982.
  163. Abdelmoniem Mohamed Amin
    A coupled theory of heat, moisture and deformation of laminated structures
    PhD, Ohio SU, 1989. DA9014390. DAIB 51(1)329.
  164. MA Aminpour
    Finite element analysis of propagating interface cracks in composites
    PhD, University of Washington-WA, 1986. DA8613131. N87-15276.
  165. J Amirbayat
    Study of model fibre reinforced systems
    PhD, Manchester, 1969!.
  166. E Amirgholizadeh
    Circular cylindrical shells of isotropic or composite materials
    Masters, Oklahoma, 1980.
  167. Douglas James Ammerman
    Behaviour & design of frames with semi-rigid composite connections
    PhD, Minnesota, 1988. DA8907366. DAIB 50(1)121.
  168. AR Amos
    The design of torispherical ends for GRP pressure vessels.
    MSc, UMIST, 1984. Thesis: 6985.
  169. DM An
    Cumulative damage theory in multiaxial fatigue of graphite/epoxy [#45']s composites and weight function theory for rectilinear anisotropic body
    PhD, RPI, 1986. DA8708512.
  170. CC An
    Residual mechanical properties of tough matrix composites after low velocity impact damage
    Masters, Tennessee TU, 1988.
  171. Wei An
    Strengthening of concrete beams with composite plastic plates
    MS, Arizona, 1990. DA1339665. MA 28(4)614.
  172. V Anandan
    Development of a nonlinear laminated finite element
    Masters, Clemson, 1988.
  173. C R Ananthanarayanan
    Micromechanics based modelling of metal matrix composites using finite element method
    PhD, Florida State University, 1995.  AADAAI9541706  DAB56(8)4533
  174. RV Ananthasubramanian
    A study of bending of sandwich cantilever beams unver various types of loading
    Masters, Ottawa, 1970.
  175. John S Anastasiadis
    Stability of cylindrical laminates by higher order shear deformable theories
    PhD, Georgia IT, 1990. DA9115370. DAIB 52(1)360.
  176. George J Anastassopoulos
    Study of fracture mechanisms and damage development in brittle-matrix composites
    PhD, NWU, 1991. DA9213411. DAIB 52(12)6613.
  177. BJ Andersen
    An experimental study of the automation of thermoplastic composite processing
    Masters, Georgia IT, March 1988.
  178. Reidar Anderssen
    Analysis of transverse cracking in composite structures: numerical, and experimental investigations
    Dr.Ing, Norges Tekniske Hogskdle (Norway), 1996, AADC509733, DAIC57(4)1402.
  179. RS Anderson
    The mechanical properties of fibre reinforced composite plates
    Thesis, Aston, 1975.
  180. JA Anderson
    The structural behaviour of curved glued laminated timber beams
    PhD, CNAA: Lanchester, 1976.
  181. RE Anderson
    A variational theorem for laminated composites plates of nonlinear materials and applications to Postbuckling
    PhD, Stanford, 1979. DA7912335.
  182. SC Anderson
    Analysis and design of bonded composite tubular joints with consideration of thermal effects
    Masters, RPI, 1984.
  183. HJ Anderson
    Isotropic and reinforced rubber analysis.
    PhD, Wales: Swansea, January 1985. C/Ph/82/85.
  184. KE Anderson
    Styrene exposure during the manufacturing of reinforced fiberglass pipe
    PhD, Oklahoma HSC, 1986. DA8610333.
  185. Timothy Carl Anderson
    Evaluation of methodology used in analysing composite ramp sections
    MS, Texas @ Arlington, 1989. MA1337535. MA28(1)153.
  186. Bruce Alan Anderson
    Stability of laminated plates with penetrations
    MS, University of Texas at Arlington, 1993.  AAD1352912  MA31(4)1907
  187. Tony Joseph Anderson
    Nonlinear vibrations of metallic and composite structures
    PhD, Virginia Polytechnic Institute and State University, 1993. AAD9331456  DAIB54(6)3171
  188. C-H Andersson
    Fibre reinforced metal matrix composite materials for high temperature applications
    Doctoral thesis 452, Chalmers UT-Sweden, 1983.
  189. D Andison
    Interphase properties of carbon reinforced epoxy
    MASc, Toronto, 1984.
  190. AV Andreev
    Examination of creep and fracture of crystalline polymer materials in biaxial tensile fatigue
    Dissertation, TS Leningrad, 1976.
  191. JRF Andrews
    Butt fusion welding of polyvinylidene fluoride and its composites
    PhD, Brunel, 1981. D41939/82.
  192. GD Andreyevskaya
    Anisotropic dielectrics in view of the chemistry of surface effects
    Thesis, USSR.Acad.Sci.Inst.Crystall, 1947.
  193. Kirk Patrick Andriano
    Development of microfibre-reinforced biodegradable composites for implant use
    PhD, Utah, 1990. DA9108053. DAIB 51(10)4934.
  194. PW Andruskiewicz
    Crack tip stresses in a laminated composite.
    Masters, MIT, 1974.
  195. LF Angelo
    Unsteady heat conduction in a composite slab with finite interface resistance
    Masters, Mississippi SU, 1967.
  196. T Angsirikul
    Nonlinear flutter of a laminated orthotropic plate in supersonic flow, including the effect of transverse shear and rotary inertia
    Masters, Stanford, 1973.
  197. Felix C J Anigbo
    Study of failure mechanisms and strain distribution in composite laminates under cyclic loading using Moire interferometry
    PhD, SDSMT, 1991. DA-0384254.
  198. RA Ankeny
    The use of epoxy resin compounds as a shear connector in composite beam construction
    Masters, Arizona, 1966.
  199. RC Ankhad
    Solution of anisotropic plate by Rayleigh-Ritz method.
    Masters, Oklahoma SU, 1965.
  200. Gunay Anlas
    Fracture of an elliptical inclusion and its implications for the properties of short fiber composites
    PhD, University of Delaware, 1992.  AAD9301772  DAIB53(9)4764
  201. RW Annandale
    Thermal & structural analysis of large space antennae reflectors
    PhD, Surrey, 1986.
  202. R Ansems
    Crystallisation in fibreglass compositions
    Masters, Illinois, 1974.
  203. GW Antal
    Analysis of interlaminar flaw behavior in carbon fibre/epoxy angles
    Masters, Delaware, 1986.
  204. DM Antoniadis
    Ultrasonic attenuation as a measure of the structural integrity of environmentally damaged glass-reinforced plastics
    MSc, University of Manchester, 1984
  205. MK Antoon
    FT-IR investigation of structure and moisture stability of the epoxy matrix in glass-reinforced composites
    PhD, CWRU, 1980. DA8013869. N80-25378.
  206. Qingbo Ao
    Development of boundary methods of solution of anisotropic elastostatic problems
    PhD, University of Kentucky, 1994.  AAD9426166  DAIB55(5)1908
  207. Masaki Aono
    Computer-aided geometric design for forming woven cloth composites
    PhD, Rensselaer Polytechnic Institute, 1994.  AAD9434555  DAIB55(8)3403.
    >>> LE Aoufi, see L El-Aoufi.
  208. JLP Aparicio: see JL Perez Aparicio
  209. M Apostal
    Development of an anisotropic singularity finite element utilizing the hybrid displacement method
    PhD, SUNY, 1974.
  210. S Apostolou
    Design, fabrication and testing of anisotropic polymer biomaterials
    DSc, Washington University-MO, 1976.
  211. Michael Domenil Appolonia
    The application of filament wound graphite/epoxy composites to acoustic drum shells
    MSEng, Lowell, 1991. MA1343735. MA 29(4)712.
    >>> EEA de Aragao, see EEA De Aragao
    >>> GT Aranguren, see G Tepedino Aranguren.
  212. Emin Selcuk Ardic
    Stress fields in composite materials by means of a non-classical approach
    PhD, Delaware, August 1989. DA9010390. DAIB 50(11)5267.
  213. AR Aref-Azar
    Preparation and mechanical properties of epoxy and polyester composites containing aramid and glass fibre
    MSc, Lancaster, 1977. Restricted access.
  214. Ali Arefmanesh
    Numerical and experimental study of bubble growth in highly viscous fluids
    PhD, University of Delaware, 1991.  AAD9223698  DAIB53(5)2497
  215. AR de Arellano Lopez: see AR de Arellano Lopez
  216. RT Arenburg
    Analysis of the effect of matrix degradation on the fatigue strength of a graphite/epoxy laminate
    MS, TA&MU, May 1982.
  217. Robert Thomas Arenburg
    Analysis of metal matrix composite structures using a micromechanical constitutive theory
    PhD, VPI&SU, 1989.  DA8913738.  DAIB 50(4)1493.
  218. Alan Argento
    Parametric resonance of arbitrarily layered composite circular cylindrical shells
    PhD, Michigan, 1989. DA9013850. DAIB 51(1)279.
  219. D Argintar
    Exact lower bound solutions for specially orthotropic rectangular plates with arbitrary boundary conditions
    Masters, RPI, 1983.
  220. Sunil Krishna Arjun
    Effects of processing parameters, moisture, regrind and heat aging on the physical properties of 15% glass reinforced polybutylene terephthalate
    MS, University of Lowell, 1995. MA33(6)1966.
  221. EA Armanios
    New methods of sublaminate analysis for composite structures and applications to fracture processes
    PhD, Georgia IT, March 1985. DA8516405. N86-16281.
  222. AJ Armstrong
    Curing characteristics of a composite matrix
    MSc, Salford, 1986. ASLIB 37(2)4265.
  223. KB Armstrong
    Selection of adhesives and composite matrix resins for aircraft repairs
    PhD, City University - London, 1990
  224. William David Armstrong
    Thermal curing damage accumulation processes in an advanced metal matrix composite
    PhD, Univ Washington - WA, 1991. DA9124905. DAIB 52(3)1672.
  225. Veronique Arnault
    Relations entre microstructure et comportement mecanique des composites silicium carbure/silicium carbure: analyse du role de l'interface dans le processus de fissuration matricielle dans des materiaux multifilamentaires
    [Relations between microstructure and mechanical behaviour of SiC/SiC composites: interface effects on multiple cracking]
    Doctorate, INSA Lyon, 1989. DA-C156275. DAIC 52(1)154.
  226. RR Arnold
    Buckling, postbuckling and crippling of materially nonlinear laminated composite plates
    PhD, Stanford, 1983. DA8314433. N84-14239.
  227. William Stewart Arnold
    Behaviour of mechanically fastened joints in composite structures
    PhD, CNAA: Paisley CT, June 1989. DX87932. DAIB 50(11)5267.
  228. EL Aronne
    Ultimate strength of hybrid longitudinally stiffened plate panels
    Masters, GWU, 1966.
  229. C-G Aronsson
    Static strength of notched composites.
    Licentiate, KTH Stockholm, 1983. KTH-Report-83-2.
  230. C-G Aronsson
    Tensile fracture of composite laminates with holes and cracks
    Dr.techn, KTH Stockholm, 1984. TRITA-DISS-1483. KTH-Report-84-5.
  231. M Arrington
    Some aspects of interfacial bonding in composites with special reference to carbon and glass fibre reinforced plastics.
    PhD, Sussex, September 1976. D18241/77.
  232. PJ Arseneaux
    An experimental investigation of stress waves in rods of a fibre-reinforced composite
    Masters, Brown, 1973.
  233. Petar Arsenovic
    Non-linear characterization of graphite fibers
    PhD, Johns Hopkins University, 1992.  AAD9229294  DAIB53(5)2485
  234. Yervant Arslanian
    Stress corrosion of sheet moulding componds
    PhD, London: QMW, 1990.
  235. CE Arthur
    A response surface for the complex modulus of composite materials
    Masters, VPI&SU, 1974.
  236. NK Asamoah
    Shrinkage and adhesive stresses in fibre reinforced composites
    PhD, London: ICST&M, 1970.
  237. B Asgharian
    Theoretical deposition of fibrous particles in the respiratory system of humans and rats
    PhD, SUNY Buffalo, 1988. DA8812317. DAIB 49(7)2809.
  238. NE Ashbaugh
    The stress field around a broken layer in a composite material
    PhD, UCSD, 1971. DA7126565.
  239. FA Ashdown
    Compatibility study of SiC filaments with commercial purity titanium
    Masters, AFIT, 1968.
  240. M Ashizawa
    Joining of filament reinforced composite laminate.
    Masters, California State Coll, 1970.
  241. HA Ashour
    Stability of laminated stiffened prismatic structures.
    PhD, Cincinnati, 1975. DA7519551.
  242. MS Aslanova
    Physicochemical basis of the mechanical, electrical and adhesion properties of glass fibres
    Doctorate, Acad.Sci.Inst.Phys.Chem, Moscow, 1954
  243. NT Asnani
    Vibration analysis of multilayered beams with constrained viscoelastic layers
    PhD, IIT New Delhi, 1971.
  244. RD Asquith
    Mechanical properties of graphite-epoxy composites with intermittent bonding
    BE, Sydney-Australia, November 1982.
  245. FYI Assabghy
    Structure of polyacrylonitrile based carbon fibres as studied by electron spin resonance and other electronic properties
    PhD, Keele, 1971!.
  246. GS Assimakopoulos
    Masters, UMIST, 1983.
  247. R Asthana
    Infiltration processing of silicon carbide platelet reinforced aluminium alloy composites
    PhD, Wisconsin: Milwaukee, 1991.
  248. B Tomas Åström
    Analyses of manufacturing methods for thermoplastic-matrix composites
    TeknDr, Kungliga Tekniska Hogskolan - Sweden, 1992.  AADC274770  DAIC53(01)327
  249. Ali Rana Atilgan
    Towards a unified analysis methodology for composite rotor blades
    PhD, Georgia IT, 1989. DA9005467. DAIB 50(9)4102.
  250. Brahim Attaf
    Vibration and stability analyses of unstiffened and stiffened composite plates
    PhD, Surrey, April 1990. DX90699. DAIB 51(7)3488.
  251. II Attarwala
    Processing-morphology-property relationship in cured epoxy networks
    Masters, PI Brooklyn, 1987.
  252. Abdelkader Attou
    Cracking and stress corrosion cracking in glass fibre materials using acoustic emission
    PhD, CNAA:, Robert Gordon Institute of Technology Aberdeen, September 1990.
    DX93331. DAIB 52(6)3234.
  253. MS Atwal
    The acoustic properties of textile fabrics
    PhD, CNAA: Leicester, October 1982. D44643/83.
  254. Eisso Hendrik Atzema
    Formability of sheet metal and sandwich laminates
    Dr, Twente University of Technology - Netherlands, 1994.  AADC360108  DAIC55(3)937
  255. TH Aulenbach
    Plane strain crack toughness of fibreglass reinforced plastics
    Masters, MIT, 1969.
  256. PH Aurora
    Practical reinforced polyester low-cost building construction for developing economies
    Masters, PINY Brooklyn, 1973.
  257. JW Auser
    Load rate effects on delamination fracture toughness of graphite/epoxy composites
    MS, IIT Chicago, May 1985.
  258. GJ Aust
    Isotropic failure criteria applied to composite materials
    Masters, Wyoming, 1986.
  259. SA Austin
    Melt extract fibre reinforced composites
    PhD, Loughborough, June 1984. D53312/85.
  260. YaV Auzukalans
    Long-term compressive strength of reinforced plastics
    Dissertation, Riga-USSR, 1974.
  261. A Avena
    Comportement a long terme de materiaux composites en immersion a grand profondeur
    [Long term loading of composites immersed at great depths]
    Doctorate, EMP Evry, October 1987.
  262. WB Avery
    Study of the mechanical behaviour of a 2-D carbon/carbon composite
    PhD, VPI&SU, 1987. DA8725104.
  263. JA Avila
    Analytical and numerical study of the fibre pull-out problem
    Masters, Pittsburgh, 1980.
  264. Cuauhtemoc Aviles Ramos
    Solution of the heat conduction equation in an anisotropic strip
    MS, Texas @ Arlington, 1991. MA1347208. MA 30(3)860.
  265. ET Awad
    The mechanical and optical characterisation of 'Laminac' polyester resins for use in photomechanics
    Masters, Mississippi SU, 1973.
  266. Mohammad Abdul Awal
    Transient response of delamination, intersecting and transverse cracks in layered composite plates
    MS, Arizona, 1989. MA1336541. MA 27(4)516.
  267. SR Axelson
    Preparation and evaluation of silicon nitride matrices for SiN/SiC fibre composites
    Masters, Alfred, 1988.
  268. Niklas Axen
    Abrasive wear of metal matrix composites
    TeknDr, Uppsala Universitet - Sweden, 1993.  AADC354673  DAIC55(3)989
  269. T Ayar
    Biaxial fatigue of graphite/epoxy (0/+45) tubes.
    Masters, RPI, 1984.
  270. Ayodeji John Ayorinde
    Application of analytical instruments in epoxy resin characterisation
    PhD, Nebraska-Lincoln, 1990. DA9030103. DAIB 51(6)3017.
  271. Waleed Adib Azar
    Analytical and experimental evaluation of fibre-reinforced plastic bridge decks under fatigue loads
    MS, CSULB, 1989. MA1339376.  MA 28(3)443.
  272. Abbas Azhdari
    Dynamic modelling and stress analysis of a two-degree-of-freedom flexible robotic manipulator fabricated from advanced composites
    MS, Nevado: Reno, 1989. MA1337957. MA 28(1)153.
  273. Abbas Azdari
    Fracturing in anisotropic brittle solids
    PhD, University of California, San Diego, 1995, AADAAI9602446, DAIB56(10)5716.
  274. Y bin Aziz
    Composites of natural rubber and polyaramid short fibres
    PhD, Loughborough, March 1981. DX92130.
  275. AM Azzeer
    Contactless resistivity measurements on carbon fibres using a microwave perturbation technique
    Masters, Colorado SU, 1981.
  276. YG Baaklini
    Ultrasonic evaluation of a 0' graphite-epoxy composite under tensile loading
    MS, Cleveland SU, December 1981.
  277. TJ Baas
    Deep draw moulding of wood flake composites: geometric effects
    Masters, Michigan TU, 1988.
  278. Aram M Babayan
    Resorbable short-fibre reinforced composite for fracture fixation
    MASc, University of Toronto, 1991.  AADMM74049  MA31(3)1347
  279. P Babb
    Fracture characteristics of glass-fibre-polyester composites
    MPhil, CNAA: Plymouth, September 1979.
  280. VF Babich
    Investigation of the effect of temperature on mechanical characteristics of tough network polymers
    PhD, TS-Moscow, 1966.
  281. TC Bache
    Continuum theory with microstructure for wave propagation in composite materials
    PhD, UCSD, 1973. DA7318155.
  282. BI Bachrach
    Experimental study of composite tubes under biaxial stress conditions
    Masters, Cornell, 1972.
  283. BI Bachrach
    Plastic analysis of fibre reinforced shells incorporating a maximum shear stress theory for the yielding of the material.
    PhD, Cornell, 1973. DA7406371.
  284. Douglas James Backes
    The effect of resin soluble binder on mold filling with nonwoven preforms
    MS, Michigan State University, 1993.  AAD1354842  MA32(3)1007
  285. DGC Bacon
    Dynamic properties of carbon and glass fibre reinforced plastics
    PhD, Bristol, 1973. N76-24367.
  286. Charles Robert Bacon
    Compression failure mechanism of Kevlar (TM)/epoxy composites, and interphase characterisation by Raman microprobe
    PhD, Michigan TU, 1990. DA9126034. DAIB 52(4)2062.
  287. Ashraf M Badir
    Analysis of advanced thin-walled composite structures
    PhD, Georgia IT, 1992. DA9223766. DAIB 53(4)1941.
  288. HR Bae
    Effects of temperature on tensile strength and elastic modulus of composite material
    MS in ME, NPS Monterey, March 1985. AD A156 112. N85-35251.
  289. JR Baer
    In-vitro testing of ceramic fibre composite as biomedical material
    Masters, Alfred, 1976.
  290. Reza Bagheri
    Rubber-toughened epoxies:  role of characteristics of particle and particle/matrix interface
    PhD, Lehigh University, 1995.  AADAAI9530975  DAB56(5)2807
  291. RL Bagley
    The analysis of two simple composite structures using mechanical admittance methods
    Masters, MIT, 1971.
  292. YA Bahei-El-Din
    Plastic analysis of metal matrix composite laminate
    PhD, Duke, July 1979. DA8003614.
  293. B Baharlou
    Vibration and buckling of laminated composite plates with arbitrary boundary conditions
    PhD, Ohio SU, 1985. DA8518914. N86-19641.
  294. FH Bahr
    Computer aided structural and performance analysis of a composite sailplane
    Masters, RPI, 1987.
  295. JM Bai
    Chemoviscosity modelling of thermosetting resins
    MS, Old Dominion, 1986.
  296. Jiamin Bai
    Dynamic response of sandwich and laminated composites with imperfect interface and delamination
    PhD, University of Florida, 1994, AADAAI9607026, DAIB56(11)6339.
  297. R Bailey
    The mechanical properties of a thermoplastic with glass fibre and rubber additions
    PhD, Surrey, March 1986. D69983/86. ASLIB 39(1)1942.
  298. RM Bailey
    The characterisation of glass fibres for papermaking
    Masters, University of Washington - WA, 1988.
  299. IS Bainbridge
    Synthesis of aromatic polyimides
    MSc, Liverpool, 1989. ASLIB 39(2)3414. Restricted access.
  300. DR Bair
    Analysis of strain versus internal pressure of buried FRP pipe from tests and finite element modelling
    Masters, Utah SU, 1985.
    >>> GR de Baise, see GR De-Baise.
  301. AA Baker
    Fatigue of fibre reinforced aluminium
    PhD, Nottingham, 1967.
  302. ZQ Baker
    <insertion loss of steel fibre/ABS in a microwave waveguide>
    MSc, Jordan, 1987.
  303. Sasan Bakhtiari
    Open-ended sensors for microwave nondestructive evaluation of layered composite media
    PhD, Colorado State University, 1992.  AAD9417610  DAIB55(1)6671
  304. CE Bakis
    Fatigue response of notched composite laminates subjected to tension-compression loading
    MS, VPI&SU, December 1984.
  305. Charles Emanuel Bakis
    Fatigue behaviour of notched carbon epoxy laminates during reversed cyclic loads
    PhD, VPI&SU, 1988. DA8826332. DAIB 49(9)3846.
  306. TN Bakthavathsalam
    Suppression of interference flutter by composite tailoring
    PhD, Texas @ Austin, May 1983. DA8319557.
  307. John G Bakuckas
    Damage progression during static and fatigue loading in metal matrix composites
    PhD, Drexel, 1991. DA9119028. DAIB 52(1)468. In 3 volumes.
  308. Krishnan Balasubramaniam
    Guided plate waves and reflection factor for NDE of composite material
    PhD, Drexel, 1989. DA8915406. DAIB 50(5)2111.
  309. TS Balasubramanian
    Polar winding machine
    MTech, IIT-Madras, 1974.
  310. RA Baldwin
    The interfacial shear failure of flawed fibre composite.
    Masters, VPI&SU, 1970.
  311. JE Baldwin
    Experimental determination of stress concentration factors in advanced fibrous composite laminates
    Masters, RPI, 1978.
  312. James Daniel Baldwin
    The design, construction, analysis and testing of an elastically tailored carbon fiber/epoxy wing box structure
    MS, Mississippi State University, 1992.   AAD1353312   MS32(1)286
  313. G Baliga
    Numerical simulation of one dimensional heat transfer in composite bodies with phase change
    Masters, Toledo, 1980.
  314. J Ball
    Glass reinforced plastics for marine structures
    MSc, Bath, 1974.
  315. JW Ballard
    Mechanical anisotropy of oriented thermoplastics
    PhD, Cranfield IT, 1975. D5614/76.
  316. Aldo Ballerini
    Cure of aqueous phenol-formaldehyde resin at elevated water vapor pressures (resin curing, wood adhesives, adhesives)
    PhD, Virginia Polytechnic Institute and State University, 1994.  AADAAI9524769  DAB56(3)1453
  317. NJA Ballintyn
    Viscoelastic property characterisations: transform techniques for partial data
    Masters, Delaware, 1981.
  318. Youssef Adel Ballout
    Erosion mechanisms in composite materials and ripple formation mechanism in erosion
    PhD, Wichita SU, 1988. DA8918720. DAIB 50(5)2111.
  319. MN Baltacioglu
    Numerical determination of elastic constants for damaged fibre composite plates
    PhD, Carleton, 1986.
  320. GR Bandurek
    Some transport properties of composite materials.
    DPhil, Oxford, 1982. D45796/83.
  321. N Bandyopadhyay
    Finite element analysis of end problems of orthotropic cylinders
    PhD, Massachusetts, 1978. DA7901972.
  322. A Banerjee
    Study of bolted joints in CFRP laminates.
    MTech, IIT-Madras, 1987.
  323. Abhijit Banerjee
    Interfacial characterization of carbon fibre/epoxy composites
    PhD, Clemson, 1989. DA9017792. DAIB 51(2)865.
  324. Robin Banerjee
    Stress analysis of composite laminates under transient dynamic and impact loading
    PhD, University of Dayton, 1994.  AAD9428022  DAIB55(6)2355
  325. SL Banizaman
    Analysis of fibre orientation effect on fiberglass reinforced plastic plates under buckling load
    Masters, S.Carolina, 1981.
  326. MH Bank
    The effect of fibre direction on the instability of single layer resin impregnated glass cloth cylinders under torsion
    Masters, Stanford, 1967.
  327. LC Bank
    The elastoplastic behaviour of composite laminates.
    PhD, Columbia, 1985. DA8523113. N86-22639.
  328. WM Banks
    Evaluation of the elastic moduli and stiffnesses of orthotropic plates
    MSc, Strathclyde, 1966!.
  329. WM Banks
    A contribution to the geometric nonlinear behaviour of orthotropic plates
    PhD, Strathclyde, 1977. D20285/77.
  330. LG Banks
    The glass to rubber transition of epoxy resins: effects of network structure
    PhD, Sheffield, August 1982. DX 88901.
  331. DC Bannerman
    A study of use of laminated composite wing structures for controlling the divergence speed of forward swept wings.
    Masters, AFIT-WPAFB, December 1978. AFIT/GAE/AA/78D-1. AD A081 898.
  332. RK Bansal
    Finite element analysis of fibre interaction in discontinuous fibre reinforced composite
    MTech, IIT Kanpur, December 1976.
  333. F Baradari
    A study of cracks emanating from holes in SMC-R50 sheet.
    Masters, Missouri-Rolla, 1984.
  334. R Barber Fornes: see RB Fornes
  335. Ever J Barbero
    Generalized laminate theory with application to bending, vibration and delamination buckling in composite laminates
    PhD, VPI&SU, 1989. DA9013515. DAIB 50(12)5749.
  336. M Barbezat
    The influence of loading rate on the behaviour of epoxy composites
    PhD, Ecole Polytechnique Federale de Lausanne, 1990. In French.
  337. Asgeir Bardal
    Interfaces in aluminium-silicon carbide composites: investigations by transmission electron microscopy
    DrIng, Trondheim, 1991. DA-C211640. DAIC 53(1)164.
  338. RL Barker
    Measurement of fibre size and shape
    PhD, Clemson, 1978. DA7821548.
  339. H-L Barking
    Steuerungskonzepte fur das prazisionwickeln von faserverstarkten kunststoffen
    [Control concept for precision winding of fibre reinforced plastic]
    DIng, RWTH Aachen, 12 December 1977. DS7709.
  340. D Barkley
    Instrumentation of impact testing and evaluation of fibre reinforced injection moulded thermoplastics by process-structure-properties correlation
    PhD, CNAA, September 1989. DX77728.
  341. David Barkley
    Instrumentation of impact testing and evaluation of fibre reinforced injection moulded thermoplastics by process-structure-mechanical properties correlation
    PhD, Ulster: Jordanstown, September 1989.
  342. SR Barlow
    A simplified buckling analysis for open-section stiffened composite compression panels
    Masters, RPI, 1988.
  343. PR Barnard
    On the collapse of composite beams
    PhD, Cambridge (& Queens Ontario), 1963-4.
  344. AJ Barnard
    The finite element method applied to the analysis of sandwich plate and shell structures
    MSc, Loughborough, 1972.
  345. PM Barnard
    Cumulative fatigue and life prediction of unidirectionally reinforced E-glass/epoxy composites
    PhD, Cranfield IT, September 1986. D74435/87. ASLIB 37(3)6024.
  346. JA Barnes
    Torsion testing of filament wound composite cylinders.
    PhD, Cambridge, September 1986. D59807. ASLIB 36(3)6427.
  347. TR Barnett
    An experimental and analytical evaluation of a biaxial test for determining shear properties of composite materials
    Masters, Clemson, 1988.
  348. MH Baroud
    Creep relaxation of axisymmetric wire wound cylindrical pressure vessels
    Masters, Louisiana SU, 1980.
  349. V Barrailler
    A study of the fibre/matrix interface in aluminium/alumina composites
    Masters, Delaware, 1985.
  350. ML Barron
    The variational strain energy method applied to the end problem of a laminated rectangular strip subject to a temperature change
    Masters, Cincinnati, 1968.
  351. RP Barrowcliff
    Non-destructive evaluation of carbon fibre composite bonded joints
    MSc, Salford, 1988. ASLIB 38(1)1974. Restricted access.
  352. P Barth
    Geregelte Faserspritzanlagen furden Industrierobotereinsatz
    [Control of fibre placement by industrial robots]
    Diplomarbeit D8424, IKV Aachen, 1984.
  353. BM Barthelemy
    Finite element analysis of bonded joints
    Masters, VPI&SU, April 1984. VPI-E-84-15. AD A140 559.
  354. RA Bartholomew
    Effective stiffness theory for elastic wave propagation in filamentary composite materials
    PhD, AFIT WPAFB, June1971. AFIT/DS/MC/71-1. DA7200007.
  355. DE Barton
    Asymmetric bending of polar orthotropic circular plates.
    Masters, California: Irvine, 1979/80.
  356. DC Barton
    The strength and deformation of torispherical ends for glass reinforced plastics pressure vessels
    PhD, UMIST, April 1981. D48544/84(2 volumes).
  357. P Bartos
    Bond characteristics in fibrous composites with brittle matrices
    PhD, Southampton, 1978. D23184/78.
  358. WD Bartron
    Fracture of FRP in marine applications
    Masters, MIT, 1974.
  359. TA Bartush
    An octahedral shear theory of yeilding of anisotropic materials
    Masters, Pennsylvania SU, 1965.
  360. SK Barua
    Continuous filament glass-ceramic fibre
    Masters, Alfred, 1983.
  361. NR Basavanhally
    Mechanical vibration damping in orthotropic and isotropic plates and beams
    Masters, Pittsburg, 1976.
  362. JS Basdeo
    Fracture behaviour of polyetherketone
    PhD, Leeds, 1988. ASLIB 37(4)8284.
  363. Manohar Bashyam
    Low-frequency surface acoustic wave considerations for ceramic matrix composite material characterisation
    PhD, Drexel, 1991. DA9128526. DAIB 52(4)2251.
  364. DB Basic
    General series solution of the elasticity problem of a composite strip
    Masters, Mississippi, 1973.
  365. S Baskar
    Scattering matrix and finite element approaches to study target strengths of homogeneous, composite and stiffened shells.
    PhD, Pennsylvania SU, 1986. DA8623716. N87-21371.
  366. B Baskaran
    Analysis and design of composite flex beam of helicopter tail rotor
    MTech, IIT-Madras, 1987.
  367. JL Bassani
    The antiplane shear crack lying at arbitrary orientation with respect to a bimaterial interface
    Masters, Lehigh, 1975.
  368. CA Bassil
    Degree of cure of thermoset phenolic by hot indentation and swelling tests
    Masters, Dayton, 1983.
  369. L Bastien
    Resistance welding of PEEK composites
    MS, Delaware, July 1990.
  370. S Basu
    Functional analysis of the response behaviour of structured media
    Masters, McGill, 1970.
  371. Gibson Leonard Batch
    Crosslinking free radical kinetics and the pultrusion processing of composites
    PhD, Minnesota, 1989. DA8915804. DAIB 50(5)2045.
  372. JH Bateman
    Five-point bending test to evaluate the interlaminar shear strength of wood composites
    Masters, Purdue, 1987.
  373. EA Bates
    Impact behaviour of polyester sheet moulding compounds.
    PhD, Liverpool, 1979.
  374. Philip J Bates
    Melt impregnation of glass roving in a thermoplastic pultrusion compounding process
    PhD, McGill University, 1993.  AADAAINN91894  DAB55(11)5047
  375. R Battistella
    <surface treatments on glass fibres>.
    PhD, Strasbourg, 1971.
  376. RC Batzel
    Computer-aided material selection of composites
    Masters, Missouri: Columbia, 1988.
  377. OA Bauchau
    Design, manufacturing and testing of high speed rotating graphite/epoxy shafts
    PhD, MIT, June 1981.
  378. MA Bauer
    The reliability of series-parallel load-sharing systems that contain flaws
    PhD, Cornell, 1982. DA8210824.
  379. SW Bauer
    High speed spreading of carbon fibre tows for the production of thermoplastic prepregs
    SM(ME), MIT, 1987.
  380. KJ Baumann
    An experimental study of the effect of defects on the compressive properties of graphite/epoxy composite materials.
    PhD, Carnegie-Mellon, 1985. DA8605971.
  381. Randy Scott Bay
    Fibre orientation in injection moulded composites: a comparison of theory and experiment
    PhD, UIUC, 1991. DA9210739. DAIB 52(11)6034.
  382. Z Bayasi
    Development and mechanical characterisation of carbon fibre reinforced cement composites
    PhD, Michigan SU, 1988.
  383. MW Bayes
    An investigation of electrodeposition using carbon fibre microelectrodes
    PhD, Southampton, September 1981. D43792/82.
  384. TD Bayha
    A study on the relationships among fibre diameter, fibre volume fraction and resistance to flow through networks of circular fibres
    Masters, Clemson, 1986.
  385. ER Baylis
    Wave propagation in fibre-reinforced laminates.
    PhD, Nottingham, October 1986. D72053/87. ASLIB 36(4)8739.
  386. JL Baylor
    A theory of anisotropic viscoelastic sandwich shells.
    PhD, California: Berkeley, 1965. DA6513440.
  387. J-P Bayoux
    Influence de l'interface charge/polymere sur les proprietes viscoelastiques des materiaux composites
    [Influence of filler/matrix interface on the viscoelastic properties of composite materials]
    DEtat, INSA/Lyon I, 1980.
  388. HL Beach
    The application of the orthogonal expansion technique to conduction heat transfer in multilayer cylinders
    Masters, NCSU, 1968.
  389. Christopher Beard
    Injection molding of long fiber reinforced thermoplastics for new product development and proof of concept (safety shoes)
    MS, University of Lowell, 1996, AAD1382638, MA35(2)586.
  390. Mark William Beatty
    Effect of changes in resin matrix chemistry and microfiller addition on composite resin properties
    MS, Indiana, 1991. MA1344700. MA 29(4)633.
  391. PWR Beaumont
    Fracture and fatigue of carbon fibre reinforced plastics
    DPhil, Sussex, 1970.
  392. GS Beaupre
    SH wave propagation in a laminated composite
    PhD, Stanford, 1983. DA8329688. N84-20646.
  393. FL Beavers
    <analysis of heat conduction in anisotropic laminates>
    Masters(Mech & Aero), Arizona @ Tucson, 1986.
  394. Sidsel May Bech
    Experimental and numerical determination of stiffness and strength of GRP-PVC sandwich structures
    Dr.Ing, Norges Tekniske Hogskole (Norway), 1995.  AADAAIC425303  DAC56(3)779
  395. GJ Becht
    An investigation of interlaminar fracture of composite materials under mode III loading
    Masters, Delaware, 1988.
  396. SD Beck
    The behaviour of a composite disc in plane elastic equilibrium
    PhD, RPI, 1969. DA6913670.
  397. RT Beck
    Work hardening of simple composite models
    Masters, Brown, 1984.
  398. ML Becker
    Analytical/experimental investigation of the instability of composite cylindrical panels
    Masters, AFIT WPAFB, December 1979. AFIT/GAE/AA/79D-3. AD A079 850.
  399. W Becker
    Mechanical response of unidirectional boron/aluminium under combined loading
    MS, VPI&SU, 1987.
  400. Christian Guy Becker
    Cure shrinkage control in polymerization of multicomponent resin systems with phase separation
    MS, Rice University, 1993.  AAD1355170  MA32(3)967.
    >>> S de Becker, see S De-Becker.
  401. SW Beckwith
    Viscoelastic characterisation of a nonlinear glass/epoxy composite including the effect of damage
    PhD, TA&MU, December1974. DA7515011. N75-28140.
  402. ML Becraft
    The rheology of concentrated fibre suspensions
    PhD, Delaware, 1988.
  403. PJ Bednarczyk
    Shear deflection in thin-walled fibre-reinforced composite beams
    MS, RPI, May 1987.
  404. L Bednarowicz
    Efekt skali i nieliniowosc laminatu epoksydowoszklanego zbrojonego tkanina
    [Effect of scale and nonlinearity of glass fabric reinforced epoxy resin laminate]
    Dr.inz, Poli.Wroclawska, 1977.
  405. ME Beeby
    A study of the effect of some important parameters on the fracture and mechanical properties of carbon fibre reinforced epoxy resins
    PhD, Birmingham, 1974-5.
  406. Stephen Clinton Beecher
    Thermal transport properties of selected advanced ceramic composite
    PhD, Delaware, 1990. DA9109925. DAIB 51(11)5396.
  407. Christopher Perth Beganski
    Silicon carbide composite reinforced with modified unidirectional silicon carbide whiskers
    MSc, University of Lowell, 1996, AAD1381658, MA35((1)281.
  408. M Begemann
    Long fibre reinforcing with RIM technologies
    Thesis, Aachen, 1989.
  409. Matthew Richard Begley
    Time and cycle dependent crack growth in fibre-reinforced composites
    PhD, University of California Santa Barbara, 1995, AADAAI9605809. DAIB56(10)5751.
  410. A Behmer
    Beitrag zur Kenntnis der Verarbeitungs eigenschaften
    [Study of data on processing conditions]
    Dissertation, RWTH Aachen, 1975.
  411. UP Behrenbeck
    Fertigungs- und werkstoffgerechte Konstruktion von Faserverbundbauteilen
    [Manufacture and optimum design of fibre composite structures]
    Dissertation, RWTH Aachen, 1987.
  412. RA Behrens
    Transient domain free surface flows and their applications to mould filling
    PhD, Delaware, 1983.
  413. WW Behrens
    A wear study of two carbon fibre reinforced thermoplastics
    MS, Washington University-MO, 1985.
  414. F Behzadpour
    Determination of the stress concentration factors and stress intensity around notches in graphite epoxy laminate - a finite element approach
    Masters, Wichita SU, 1986.
  415. AL Beil'
    Refined models of the mechanics of winding composites.
    Dissertation, Tech.Sci-Riga, 1977.
  416. Benjamin Beker
    Analysis of electromagnetic scattering by arbitrary shaped anisotropic objects using combined field surface integral equation formulation
    PhD, UIUC, 1988. DA8827215. DAIB 49(10)4456.
  417. NEM Bekhet
    The biaxial strength and deformation characteristics of highly oriented polymers
    PhD, Leeds, October 1989. D89297.
  418. S Beland
    Effets hygrothermique sur la tenacite en mode I d'un stratifie carbone/epoxy Bismaleimide
    [Hygrothermal effects on mode I strength of carbon/epoxy/BMI]
    Masters, Sherbrooke, 1987.
  419. J Belani
    Moisture diffusion and degradation of carbon-epoxy composites
    MS, IIT Chicago, May 1977.
  420. Ronald Belardinelli
    Investigation of the dielectric response of poly(phenylene sulphide sulphone) (PPSS) thermoplastic neat resin
    MS, Texas @ Arlington, 1989. MA1338432. MA 28(3)452.
  421. Kalayu Belay
    Thermal transport properties of polycrystalline diamond films and other composites
    PhD, University of Delaware, 1994.  AADAAI9516297  DAB56(1)313
  422. Cristina Elena Beldica
    Experimental and numerical analysis of strength and fracture in fiber composites
    PhD, University of Illinois at Chicago, 1996, AAD9638808, DAIB57(7)4503.
  423. AJ Belfield
    Stress analysis of curvilinearly-reinforced materials.
    PhD, Nottingham, May 1982. D43109/82.
  424. G Belgrano
    The design, manufacture and testing of stiffened aircraft compression panels using advanced materials
    MSc, Cranfield IT, 1984.
  425. V Bell
    Nuclear thermal vulnerability of honeycomb radome materials
    MS, AFIT-WPAFB, December 1972. GNE/PH/73-1. N73-18605. AD 753 666.
  426. BJ Bell
    Predictable design in reinforced plastics
    MPhil, Surrey, 1974.
  427. DK Bell
    Composite reliability enhancement via preloading.
    Masters, NPS Monterey, June 1987. AD A185 938.
  428. JR Bell
    The relationship between cure and engineering properties of an epoxy resin
    PhD, Sheffield, 1988. ASLIB 39(4)8446.
  429. Eric Bellavance
    Contribution a l'etude des ancrages injectes constitues de tirants en materiaux composites a base de fibres (French text)
    MSc A, Universite de Sherbrooke (Canada), 1995, AADMM09441, MA34(6)2422.
  430. Rhali Benamar
    Nonlinear dynamic behaviour of fully clamped beams and rectangular isotropic and laminated plates
    PhD, Southampton, 1990. DX94717. DAIB 52(10)5482.
  431. A Benatar
    Effects of surface modification of graphite fibres by plasma treatment on the hygral behaviour of composites
    MS, MIT, May 1983.
  432. Avraham Benatar
    Ultrasonic welding of advanced thermoplastic composites.
    PhD, MIT, September 1987. DA-377593.
  433. Boutaina Benchekchou
    Stresses around fasteners in composite aircraft structures and effects on fatigue life
    PhD, University of Southampton, 1994.  AADAAIC439620  DAC56(4)1088.
  434. Hachmi ben Daly
    Parameter optimisation for forming of  carbon/PEEK composites
    Optimisation des parametres de mise en forme du composite PEEK/fibre de carbone
    MScA, Ecole Polytechnique Montreal, 1993.  AADMM86410  MA32(5)1473
  435. BK Benedict
    Experimental investigation of the shear creep of fibre reinforced viscoelastic materials
    Masters, Texas @ Austin, 1972
  436. M Ben Farhat
    These de 3eme cycle, INPL, 1985.
  437. Yassine ben Hamouda
    Experimental study of damage to a laminated carbon/epoxy composite under biaxial load
    Etude experimentale de l'endommagement d'un stratifie composite en carbone/epoxyde sous chargement equibiaxial
    MScA, Universite de Sherbrooke, 1993.  AADMM89943  MA33(2)628
  438. VO Bennett
    The analysis of orthogonally stiffened plates
    Masters, TA&MU, 1966.
  439. KA Bennett
    Reinforcement of polymeric systems through improved fibre-matrix bonding
    PhD, University of Washington-WA, 1975. DA7528317.
  440. SC Bennett
    Strength-structure relationships in carbon fibres
    PhD, Leeds, 1976.
  441. TA Bennett
    Comparison of two methods for fibre diameter measurement and a system design for the study of composite reliability.
    Masters, NPS Monterey, December 1985. AD A164 355. N86-25421.
  442. Greggory Scott Bennett
    The study of reactive thermoplastic oligomer modified epoxy-amine resin systems
    PhD, Massachusetts, 1992. DA9219403. DAIB 53(2)873.
  443. MM Bennouna
    Nonlinear behaviour of carbon fibre reinforced plastic plates
    MSc, ISVR Southampton, 1979.
  444. MMK Bennouna
    Non-linear dynamic behaviour of a clamped-clamped beam with consideration of fatigue life
    PhD, ISVR Southampton, July 1981. D43871/82.
  445. Ramazan Benrashid
    Surface-limited reactions of Kevlar fibres
    PhD, Polytechnic University, 1989. DA8922661. DAIB 50(6)2432.
  446. A Bensiali
    An expert system for the development of a health and safety policy/risk assessment in the plastics industry
    PhD, Aston, 1988. ASLIB 37(4)8492.
  447. RJ Benson
    Bending of isotropic sandwich beams and plates
    Masters, Newark Coll.Engg, 1967.
  448. RA Benson
    Instrumented tensile and charpy impact of composite materials
    MS, Wyoming, August 1979.
  449. RL Benson
    Bolted connections in composite rotor shafts.
    Masters, RPI, 1985.
  450. LD Bentsen
    Microstructural and compositional effects on the thermal diffusivity of silicon carbide and silicon nitride composites.
    PhD, VPI&SU, 1984. DA8507176.
  451. ML Benzeggagh
    Application de la mecanique de la rupture aux materiaux composites: exemple de la rupture par delaminage d'un stratifie
    [Application of fracture mechanics to composite materials: example of delamination fracture]
    Doctorate (3eme cycle), UT Compiegne, 19 June 1980.  In French.
  452. A Benzerdjeb
    Vibration and acoustic radiation of fluid loaded sandwich panels
    Masters, San Diego SU, 1984.
  453. RW Berg
    Design of Boeing 727 elevator actuator rib utilizing graphite/epoxy composites
    Masters, RPI, 1979.
  454. Ralph Edward Berger
    Centrifugal casting of metal matrix composites
    PhD, University of California - Berkeley, 1994.  AAD9504746  DAIB55(9)4066
  455. DG Berghaus
    Adapting the scattered light photoelastic method for three-dimensional stress analysis in multilayered composites
    PhD, CWRU, 1970. DA7025848.
  456. J Bergland and L Willners
    A concept study of a deckhouse made in FRP-sandwich for offshore platforms
    Thesis, Chalmers TH, November 1988. In Swedish.
  457. L Berglund
    Rate effects on the interlaminar toughness of PEEK/carbon fibre composites
    Licentiate thesis #54, Linkoping, 1985.
  458. L Berglund
    <fracture toughness of graphite/epoxy>
    Dissertation #159, Linkoping, 1987.
  459. VL Bergmann
    Mechanical property characterisation and damage in intraply hybrid composite laminates
    Masters, Nebraska, 1984.
  460. HW Bergner
    Analysis of shear test methods for composite laminates.
    Masters, VPI&SU, 1977.
  461. Paul Roland Bergquist
    An assessment of the strength and environmental durability of epoxy adhesive bonds to silicon carbide particulate reinforced aluminium materials
    MS, Lowell, 1991. MA1346099. MA 30(1)114.
  462. PL Bergstein
    Syntheses of potentially carcinogenic epoxides.
    Masters, MIT, 1981.
  463. Alvaro Bermudez
    Sizing and analysis of sandwich compression panels for initial and postbuckled loads
    MS, CSULB, 1991. MA1346837. MA 30(3)860.
  464. ML Bernard
    Impact resistance and damage tolerance of composite sandwich plates
    SM, MIT, 1987. TELAC Report 87-11.
  465. Etienne Bernard
    Path generation for filament winding of asymmetric fibre composite components
    MASc, University of Ottawa, 1991.  AADMM75043    MA31(3)1351
  466. Andre Benard
    Transport phenomena and microstructure development in semicrystalline polymers and composites
    PhD, University of Delaware, 1995, AADAAI9611479, DAIB56(12)7003.
  467. AD Bernatskii
    Effect of the structure of rigid cross-linked polymer on the parameters of the generalised nonlinear Maxwell equation.
    Dissertation, Moscow, 1971.
  468. K Berner
    Stahl/Polyurethan sandwichtragwerke unter temperatur- und brandbelastung
    [Steel/PUR sandwich wing structure under thermal and fire stresses]
    Dissertation, TH Darmstadt, 1978.
    >>> B von Bernstorff, see B Von-Bernstorff.
  469. SP Berreth
    New end tab design for off-axis tension tests of composite material
    Masters, Purdue, 1986.
  470. R Berruet
    Study of polyepoxy-carbon fibre composite used as biomaterials
    Doctorat, Lyon, in preparation for 1987.
  471. JP Berry
    Compressive modes of failure and energy absorption properties of composite tubes
    MEng, Liverpool, 1980.
  472. JP Berry
    Energy absorption and failure mechanisms of axially crushed GRP tubes
    PhD, Liverpool, November 1983. D53773/85.
  473. CW Bert
    Analysis of nonhomogeneous, polar-orthotropic circular discs that vary in thickness
    PhD, Ohio SU, 1961. DA6200743.
  474. R Bertani
    Introduction of polar functional groups on polyolefinic matrices
    PhD, Pisa, 1989.
  475. JM Berthelot
    Research to obtain metal-fibre resin composites with high fracture strength
    Thesis de 3eme cycle, Poitiers, 1974.
  476. PJ Berthier
    Electrical resistivity and magnetoresistance of benzene-derived graphite fibres at low temperatures
    Masters, MIT, 1987.
  477. AN Bertolazzi
    Design of a dimensionally stable graphite/epoxy metering structure for a space telescope satellite
    Masters, RPI, 1983
  478. JS Beshoner
    The thermal design of a laminate mould heater
    Masters, Missouri-Columbia, 1971.
  479. DE Beskos
    Universal solutions for fibre reinforced isotropic elastic materials
    Masters, Cornell, 1972.
  480. CR Bess
    Composite materials at high temperatures
    Masters, NPS Monterey, 1988.
  481. MI Bessonov
    Physical properties and structure of aromatic polyimide
    Doctorate, Chem.Sci.Mashinopis'Leningrad, 1977.
  482. M Bethmont
    Etude par emission acoustique de materiaux composites stratifies
    [Acoustic emission study of stratified composite material]
    3eme cycle, UT Compiegne, 13 June 1977.
  483. S Betts
    Performance of graphite fibre reinforced polyimide and solid lubricant filled polyimide plain journal bearings
    Masters, RPI, 1977.
  484. EP Beyeler
    Melting and solidification in processing and applications to thermoplastic composites manufacturing
    PhD, Delaware, 1987. DA8808028.
  485. G Bezine
    Application de la methode des equations integrales a la resolution des problemes statiques et dynamiques stationnaires et transitoires de flexion de plaques minces.Extension a des problemes de mecanique des fluides pour des ecoulements visqueux en regime de Stokes
    [Boundary element method for thin plates in bending. Use for fluid mechanics of viscous Stokes flow]
    DSciPhys, Poitiers, 1982.
  486. RB Bhagat
    Investigation on the fabrication of stainless steel fibre reinforced aluminium composites
    PhD, IIT Bombay, 1981.
  487. SB Bhakta
    Fatigue testing of unidirectional fibreglass composites
    Masters, Texas: El Paso, 1988.
  488. VK Bhalla
    Investigation of effects of anisotropy of wood on stress wave propagation in bars
    Masters, Washington SU, 1971.
  489. Kenneth Bhalla
    The effects of delamination on the vibrational characteristics of composite structural elements
    PhD, Cornell University, 1992.  AAD9236005  DAIB53(7)3582
  490. JV Bhardwaj
    X-ray diffraction study of the structure of boron in vapour-deposited boron fibres
    PhD, Rice, 1980. DA8018032.
  491. Narendra Venugopal Bhat
    Delamination growth in graphite/epoxy composite laminates under tensile loading
    PhD, Massachusetts Institute of Technology, 1994.  AAD0574825  DAIB55(5)1923
  492. Hemanshu Devshankar Bhatt
    Effect of interfacial thermal conductance and fibre orientation on the thermal diffusivity/conductivity of unidirectional fibre-reinforced ceramic matrix composites
    PhD, VPI&SU, 1992. DA9218503. DAIB 53(4)2006.
  493. C Bhavani
    The effects of geometric nonlinearities on the bending of composite plates
    Masters, VPI&SU, 1982.
  494. SB Bhide
    Mechanical evaluation of model composite materials.
    Masters, Lowell, 1972.
  495. Cedric Kais Bhihe
    Rough fiber pull-out in brittle matrix composites:  experiments  and simulations
    PhD, University of California - Santa Barbara, 1992.  AAD9317145  DAIB54(2)1034
  496. Ravinder Bhumbla
    Elastic tailoring of spinning advanced composite fan blades
    PhD, University of California, San Diego, 1995.  AADAAI9535419  DAB56(6)3279
  497. B Bhushan
    <fatigue damage in Kevlar/epoxy>
    MTech, IIT Kanpur, 1987.
  498. E Bianchini
    A study of the catalytic formation of carbon filaments
    Masters, SUNY Buffalo, 1988.
  499. MA Bibbo
    Rheology of semi-concentrated fibre suspensions
    PhD, MIT, 1987.
  500. AS Bicos
    Free damped vibration of composite plates and shells
    PhD, Stanford, 1988. DA8808350.
  501. SA Bidstrup
    Structure-property relations for model epoxy networks.
    PhD, Minnesota, 1986. DA8622569.
  502. Wayne Wallace Bidstrup
    Monitoring cure of composite matrix resin with microdielectrometry
    PhD, MIT, 1988. DA0378812.
  503. U Bieling
    Ermittlung mechanischer und thermischer Eigenschaften kohlenstoffaservertarkter Kunststoffe
    [Study of mechanical & thermal properties of CFRP]
    Dissertation, RWTH Aachen, 1983. DS8305.
  504. K Bieniek
    Analiza statyczna przesel mostowych jako plyt ortotropwych
    [Static analysis of the bridge span as an orthotropic plate]
    Dr.inz, Poli.Wroclawska, 1976.
  505. Rolf Werner Biernath
    Cure chemistry and mechanical stress in epoxy novolac thin films
    PhD, California: Berkeley, 1990. DA9126479. DAIB 52(4)2237.
  506. JH Biffle
    Finite element analysis for wave propagation in elastic-plastic solids
    PhD, Texas @ Austin, 1973. DA7405196.
  507. CA Bigelow
    The effect of debond growth on crack propagation in composite plates reinforced with adhesively bonded composite stringers
    PhD, Georgia IT, December 1984. DA8510952. N86-10287.
  508. L Biggs
    Laser processing of polyetheretherketone
    Senior thesis, Delaware, 1987.
  509. Henk Bijsterbosch
    Long-fiber reinforced polyamides
    PhD, Twente University of Technology - Netherlands, 1992.  AADC299203  DAIC54(3)924
  510. S Bilgin
    Extrusion of [short glass fibre/polypropylene] pipes using a rotating die system
    MSc, UMIST, September 1981. D66325/86.
  511. PJ Bill and JB Vrublevskis
    Ply delamination of plain and separated edge stepped carbon fibre specimens under tensile fatigue loading.
    BSc, Bristol, June 1985. BU-323. ETN-87-99187. N87-19467.
  512. Francois Billaut
    Fatigue behavior of drilled T300/PEEK laminated composites
    PhD, Massachusetts Institute of Technology, 1993.  AAD0573047  DAIB54(3)1600
  513. JL Billoet
    <finite element analysis of highly anisotropic plates>
    DIng, ENSAM Paris, 1986.
    >>> Y Bin-Aziz, see YB Aziz.
  514. WK Binienda
    Mixed mode fracture in fibre-reinforced composite materials
    PhD, Drexel, 1987. DA8806511.
  515. CJ Birkeland
    Strength of rectangular beams with longitudinal reinforcement in combined torsion, bending and shear
    Masters, University of Washington-WA, 1965.
  516. AN Birze
    Strain and strength characteristics of reinforced plastics in shear
    Dissertation, Riga, 1977.
  517. Elifas T N Bisanda
    Sisal fibre-reinforced composites
    PhD, Bath, 1991. DX93753. DAIB 52(7)3833.
  518. JE Bishop
    Three dimensional analysis of the stress distribution around a rigid inclination in an infinite plate
    Masters, S.Florida, 1970.
  519. BP Bishop
    Failure of reinforced plastics caused by stress concentrations
    PhD, Nottingham, 1973.
  520. WO Bishop
    Notch geometry and laminate construction effects on the fracture toughness of glass reinforced polyester
    Masters, MIT, 1973.
  521. PT Bishop
    Failure of reinforced plastics caused by stress concentrations
    PhD, Nottingham, 1975!.
  522. N Bitzer
    Honeycomb sandwich design and testing.
    PhD, Los Angeles: Century, 1980.
  523. George Francis Bixby
    Recycled cellulose fiber reinforced phenolic composites
    MS, University of Massachusetts at Lowell, 1993.  AAD1353263  MS32(1)340
  524. FMH Bizzari
    Design of fibre composite structures for large watervalves
    PhD, London: ICST&M, 1980. D34761/81.
  525. U Bjorkerud and O Erenstedt
    Passenger ferry with GRP-sandwich superstructure: feasibility study
    Thesis, Chalmers TH, 1988. In Swedish.
  526. Stephan Blach
    Kinetics of curing of a vinyl ester resin
    MA.Sc, Concordia University - Canada, 1993.  AADMM87301  MA32(6)1700
  527. NF Black
    Damage development mechanisms in notched graphite-epoxy composite laminates during compressive fatigue loading
    MS, VPI&SU, November 1981. VPI-E-81.34. N82-28367. PB82-142316.
  528. Donald Merl Blackketter
    A study of woven fabric-reinforced composite materials using an invariant-based orthotropic plasticity formulation
    PhD, Wyoming, 1989. DA9003781. DAIB 50(9)4082.
  529. A Blackmore
    Size effects in GRP
    BSc, Nottingham, April 1970.
  530. Susan E Blackson
    Reliability evaluation of composite hardware: a probabilistic micromechanics approach
    MS, San Jose SU, 1991. MA1344243. MA 29(4)703.
  531. Bosko Blagojevic
    Effects of the imbedded optical fibre sensors on the fracture toughness of composite materials
    MASc, University of Toronto, 1991.  AADMM74302  MA31(3)1280
  532. RA Blake
    Digital analysis of ultrasonic waves in composites.
    Masters, Delaware, 1980.
  533. SH Blakey
    Mechanical properties of bonded fibres
    MSc, Leeds, 1967!.
  534. A Blakeley
    Thermoelastic properties of silicone rubber and its applications in composite part production
    MSc, Salford, March 1984. Restricted access.
  535. Panagiotis Blanas
    Numerical modeling and prediction of the thermomechanical behavior of fiber-reinforced composites
    DEng, University of Lowell, 1993.  AAD9322413  DAIB54(3)1613
  536. A Blanc
    Analyse du comportement dynamique des racquettes de tennis
    [Analysis of dynamic behaviour of tennis rackets]
    DI, INSA Lyon, 1986. DAIC 49/1257.
  537. David Gordon Bland
    The manufacturing science of thermoplastic composites
    PhD, University of Tennessee, 1993.  AAD9404564  DAIB54(9)4805
  538. Paul Andrew Blatt
    Fatigue crack growth behavior of a titanium matrix composite under thermomechanical loading
    PhD, Purdue University, 1993.  AAD9420785  DAIB55(3)1018
  539. Stephen Mark Bleay
    Microstructure and micromechanics in glass and glass-ceramics reinforced with ceramic fibres
    PhD, University of Bath, 1991.  AADC286879  DAIB54(2)621
  540. DA Blessen
    Modal analysis of orthotropic shells using a high order triangular element
    Masters, California: Irvine, 1985.
  541. KW Blevins
    A comparison of finite-difference methods for the solution of the transient heat conduction equation in inhomogeneous media
    Masters, AFIT @ WPAFB, March 1982. AFIT/GNE/PH/82-4. AD A115 500. N82-31146.
  542. M Blikstad
    Fracture toughness of graphite composites
    Dissertation #126, Linkoping, 1985.
  543. PJ Blincow
    The synthesis and evaluation of aromatic crosslinked polymers of low water absorption
    PhD, CNAA: Kingston (Appl.Chem), 1986.
  544. A Blinkhorn
    Characterisation & cure phenomena of phenolformaldehyde resins
    PhD, Loughborough, August 1984. D53491/85.
  545. DL Block
    Buckling of ring stiffened orthotropic cylinders in axial compression
    Masters, VPI&SU, 1964.
  546. DL Block
    Influence of ring stiffeners and prebuckling deformations on the buckling of eccentrically stiffened orthotropic cylinders.
    PhD, VPI&SU, 1966. DA6613724.
  547. ED Blodgett
    Physical principles underlying ultrasonic non-destructive evaluation of anisotropic media.
    PhD, Washington University-MO, 1986. DA8626366.
  548. Manon Bloduc
    Qualification de tubes composites carbone/epoxyde par emission acoustique
    MSc, Universite De Sherbrooke, 1991.  AADMM71286 MA31(2)890
  549. PR Bloomfield
    Esterification and isomerisation during preparation of unsaturated polyester resin
    PhD, Surrey, 1975.
  550. BF Blumentritt
    Oriented discontinuous organic-fibre reinforced thermoplastic composite materials
    PhD, Wisconsin, 1973. DA7407457.
  551. NH Blumstein
    Residual stresses in boron filament wound composites.
    Masters, Tufts, 1968.
  552. EM Blyakhman
    Studies in the area of epoxy resins and materials based on them
    Doctorate, TS Leningrad, 1973.
  553. G Blyth
    Dynamic mechanical properties of woven fabrics.
    Undergraduate thesis, New South Wales-Australia, 1977.
  554. MS Boaira
    Amino coupling agent for mica reinforced polystyrene.
    Masters, Toronto, 1975.
  555. TA Bockrath
    Edge effects in laminated fibre composite plates subjected to in-plane loading
    PhD, UCLA, 1985. DA8525836. N86-22640.
  556. WM Boctor
    A biaxial stress transducer for fabrics
    EngSc.D, Columbia, 1982. DA8427355.
  557. HE Boden
    Mechanische Verhalten von Thermoplasten bei stossartgr Belastung
    [Mechanical behaviour of thermoplastics under intermittent loads]
    Dissertation, Aachen Univ, 1983.
  558. JP Boehler
    Theoretical and experimental contributions to the study of anisotropic plastic media
    These de Doctorat es Sciences, Grenoble, 1975.
  559. RG Boeman
    Buckling response of laminated plates with an initial debonded region
    Masters, Cincinnati, 1984.
  560. DA Bofilios
    Response and noise transmission of double wall circular plates and laminated composite cylindrical shells
    PhD, Columbia, 1985. DA8604596.
  561. TA Bogetti
    Predicting nonlinear behaviour in laminated composites.
    Masters, Delaware, December 1986.
  562. Travis Anthony Bogetti
    Process-induced stress and deformation in thick-section thermosetting composites
    PhD, Delaware, 1989. DA9019318. DAIB 51(2)935.
  563. Haitham Abdullah Bogis
    A model for the analysis and design of structures with arbitrary reinforcement and boundary conditions
    PhD, The University of Wisconsin - Madison, 1994.  AAD9419591  DAIB55(7)2966
  564. JD Bohlmann
    Static aeroelasticity of a composite oblique wing
    Masters, Purdue, 1987.
  565. JN Bohra
    Characterisation of the pore structure of carbonized rayon yarn
    PhD, Brunel UT, 1981. D38804/81.
  566. Helmut Bohm
    Computer based micromechanical investigations of the thermomechanical behavior of metal matrix composites
    DrTechn, Technische Universitaet Wien - Austria, 1991.  AADC285815  DAIC54(2)622
  567. P Boisnaud
    Analyse de coques anisotropes
    [Analysis of anisotropic shells]
    Masters, Montreal, 1978.
  568. CJL Boisrame
    Mode II fracture in unidirectional glass fibre reinforced epoxy laminates
    MSc, Cranfield IT, 1988.
  569. RP Boisvert
    Ceramic matrix composites via organometallic precursors
    MS, RPI, 1988.
  570. RL Boitnott
    Nonlinear response and failure characteristics of internally pressurized composite cylindrical panels
    PhD, VPI&SU, 1985. DA8511930.
  571. Chakib Bojji
    Comportement des materiaux composites sous choc repete
    PhD, Ecole Polytechnique, 1994.  AADAAINN93381 DAB56(1)467
  572. PL Boland
    Finite element analysis of anisotropic plates
    Masters, MIT, 1971.
  573. Manon Bolduc
    Qualification of carbon/epoxy tubes by acoutic emission
    Qualification de tubes composites carbone/epoxyde par emission acoustique
    MSc, Universite de Sherbrooke, 1991.  AADMM71286 MA31(2)890
  574. KS Bolotina
    <thermal conduction of random fibre polymer composite>
    Dissertation, Moscow, 1969.
  575. S Bolourchi
    On finite element non-linear analysis of general shell structures
    PhD, MIT, 1979.
  576. Akif Oksal Bolukbasi
    Analytical and experimental studies of the energy absorption behavior of composite structures
    PhD, Arizona State University, 1993.  AAD9410941  DAIB54(12)6317
  577. MJ Bomford
    The fatigue of fibre-reinforced metals
    PhD, Cambridge, 1969!.
  578. F Bomo
    Etude de l'adhesion fibre-polymere dans les materiaux composites a matrice polyurethane
    DIng, Haute-Alsace, 1983.
    >>> Stefan de Bondt, see S De Bondt
  579. Peter William Bonfield
    Fatigue evaluation of wood laminates for the design of wind turbine blades
    PhD, Bath, 1991. DX94299. DAIB 52(8)4418.
  580. LRL Bonhomme
    Tack and conformance of prepreg tapes during automatic tape lay-up
    SM(ME), MIT, June 1986.
  581. Lynn Boniface
    Damage development in fibre-reinforced plastics laminates
    PhD, Surrey, June 1989. DX87961. ASLIB 39(3)6342. DAIB 50(11)5258.
  582. P Bonniau
    Effets de l'absorption sur les proprietes electriques et mecaniques de materiaux composites a matrice organiques  [Effect of water absorption on electrical and mechanical properties of organic matrix composite materials applied to three materials of glass tissue in epoxy resin]
    DIng, EMP Evry, March 1983.
  583. RTJ Bonser
    Bending of laminated fibre-reinforced plates with applications to interlaminar cracks
    PhD, Nottingham, October 1984. D54280/85.
  584. P Boonluator
    Numerical analysis of continua
    PhD, New South Wales-Australia, 1977.
  585. AW Booth
    A generalised analysis of aeroelastic bending of a slender body non-uniform flight vehicle
    Masters, Maryland, 1967.
  586. M Booton
    Buckling of imperfect anisotropic cylinders under combined loading
    PhD, Toronto-Canada, 1976.
  587. ER Bopp
    Dynamic fracture initiation testing of ceramics and ceramic matrix composites
    Masters, Brown, 1988.
  588. A Bordeleau
    Utilisation de la spectroscopie photoacoustique pour la detection d'eau absorbee dans les polymers
    [Photoacoustic spectroscopy for the detection of absorbed water in polymers]
    Masters, Montreal, 1988.
  589. W Borges
    Extreme value theory in triangular arrays with application to the reliability of fibrous materials
    PhD, Cornell, 1978.
  590. RJM Borggreve
    PhD, Twente, 1988.
  591. Aladin Mohamed Boriek
    Modelling of setting stresses in particle reinforced polymer composites using finite element analysis
    PhD, Rice, 1990. DA9110949. DAIB 51(11)5526.
  592. M Borkowski
    Wplyw skladu i struktury tworzyw sztucznych wzmocnionych wloknem ciaglym na niektore wlasnosci mechaniczne kompozytu
    Doctorate, Warsaw TU, 1978.
  593. A Bose
    Acolade - A hybrid knowledge based system for composite laminate design
    Masters, Houston, 1986.
  594. BJ Bosy
    Mechanical properties of phenolic reinforced with discontinuous, random planar, polyvinylalcohol fibres
    Masters, MIT, 1975.
  595. LR Botha
    Viscoelastic analysis of adhesive stresses in bonded joints
    Masters, VPI&SU, June 1983. VPI-E-83-17.
  596. WJ Bottega
    The mechanisms of delamination in composite materials.
    PhD, Yale, 1984. DA8509687. N86-10284.
  597. LR Botvina
    Research on metallic reinforced systems with different types of load
    Dissertation, Inst.Metallurgy USSR, 1969.
  598. H Bouadi
    Buckling and postbuckling of composite plates- fibre orientation and stacking sequence effects
    Masters, Stanford, 1983.
  599. Hacene Bouadi
    Hygrothermal effects on complex moduli of composite laminates
    PhD, Florida, December 1987. DA8908214. DAIB 50(1)254.
  600. A Bouamrata
    Impact testing of polypropylene fibre reinforced concrete
    MSc, Wales: UC Cardiff, 1987.
  601. M Boubehira
    Composite materials composed of an aluminium matrix and boron fibres coated with titanium diboride.
    Dissertation, Universite Claude Bernard, 1984. In French.
  602. Michel Bouchard
    Determination de la rugosite de surface de resines composites a l'aide d'une method optique
    [Determination of the {rugosite} of composite resin surfaces aided by an optical method]
    MSc, Laval, 1990. MM-62524. MA 30(3)856. In French.
  603. Mahfoud Bouchekouk
    Evaluation of E-glass fiber coated with thermoplastic polymers for the reinforcement of concrete:  placement, mechanical properties, durability [Etude de beton renforce par des fibres de verres enduites de polymeres thermoplastiques: mise en oeuvre, proprietes mecaniques, durabilite]
    Doctorate, Institut National des Sciences Appliques de Lyon, 1992.  AADC287364  DAC54(2)275  DAIC54(2)604
  604. K Boudjelida
    Effect of temperature distribution during the welding process on prestress of multilayer wrapped cylinders
    Masters, Louisiana SU, 1983.
  605. N Bouillon
    Homopolymerisation des epoxy par les complexes BF3-amines
    [Homopolymerisation of epoxies by BF3-amine complexes]
    Doctorate, INSA-Lyon, 1988. DAIC 49(4)2637.
  606. Otmane Bouksour
    Analyse par elements finis des effets de bord dans les composites stratifies
    [Finite element analysis of edge effects in layered composites]
    PhD, Sherbrooke, 1990. DA-0384449. DA-NN61269. DAIB 52(11)5968.
  607. E Bounajm
    Free vibration of rectangular plates by the Ritz method and application to the identification of elastic properties of composite plates
    Masters, Wichita SU, 1985.
  608. Emmanuelle Le Guay Bouquerel
    Study of a glass-epoxide composite material and of its damaging:  physical, acoustic and mechanical measurements
    Etude d'un materiau composite verre-epoxyde et de son endommagement: mesures mecaniques, acoustiques et physiques
    Dr, Institut National des Sciences Appliques de Lyon, 1992.  AADC314299  DAIC54(4)1268
  609. M Bourdeaux
    Materiaux composites resine-fibres de carbon
    [Carbon fibre resin composite materials]
    Dissertation, Strasbourg I, 1974.
  610. U Bourdon
    Entwicklung einer Hauptspindel aus CFK fur Werkzeugmaschinen
    [Fabrication of a main spindle in CFRP for machine tools]
    Diplomarbeit (not dissertation), IKV & WZL, Archiv-Nr-D8435, 1984!
  611. CA Bourne
    Material damping as a means of quantifying fatigue damage in composites
    Masters, AFIT WPAFB, December 1978. AFIT/GA/AA/78D-2. AD A081 890.
  612. MD Boussouf
  613. Stiffened & prestressed composite overwrapped pressure vessels
    PhD, John Hopkins, 1985. DA8510402. N86-10547.
  614. A Bouti
    Composites thermoplastiques: polypropylene renforce avec des paillettes de verre
    [Polypropylene composites reinforced with glass spangles]
    MScA, Ecole Polytechnique de Montreal, 1988.
  615. Abdeslam Bouti
    Mechanical loading of thermoplastic composites
    Comportement mecanique des composites thermoplastiques
    PhD, Ecole Polytechnique Montreal - Canada, 1993.  AADNN86533  DAIB55(4)1621.
    >>> MO Bouyahya Idrissi, see MOB Idrissi.
  616. Gert Boven
    Glass surface-grafted poly(methylmethacrylate): adhesion in a model system for composites
    Doctorate, SU Groningen, 1990. DA-C172773. DAIC 52(2)259.
  617. GL Bowers
    Stresses in laminated composite infinite plates
    Masters, Akron, 1974.
  618. CP Bowers
    The development of a pseudo three-dimensional finite element and enhanced lamina constitutive relation for stress analysis of composite laminate plates
    Masters, Toronto, 1985.
  619. DE Bowles
    Thermal expansion of composites by moire interferometry.
    Masters, VPI&SU, 1981.
  620. J Bowles
    Fundamental studies of low velocity impact resistance of graphite fibre reinforced polymer matrix composites
    PhD, CWRU/NASA Lewis RC, November 1985. DA8510096. N86-10288. NASA-TM-86886. N86-23661.
  621. David Earl Bowles
    Micromechanics analysis of space simulated thermal deformations and stresses in continuous fibre-reinforced composites
    PhD, VPI&SU, 1989. DA9023145. DAIB 51(4)2018.
  622. J Bowling
    The fracture of composites of ductile fibres in a brittle matrix
    DPhil, Oxford, 1977. D25195/79.
  623. JA Bowlus
    Determination of the natural frequencies and mode shapes for anisotropic laminated plates including the effects of shear deformation and rotatory inertia
    Masters, AFIT, September 1985. AFIT/GA/AA/85S-1. AD A164 040. N86-24763.
  624. DA Boyce
    Material damping of graphite/epoxy double cantilever beams
    MS, MIT, September 1979.
  625. James Greenup Boyd
    Constitutive modelling of damage and plasticity in metal matrix composites
    PhD, Texas A & M University, 1994.   ADD9432647   DAIB55(7)2865
  626. JW Boyden
    A study of innovative process in the plastics additive industry
    Masters, MIT, 1976.
  627. CT Boyer
    An analytical and experimental investigation of the thermophysical properties of swelling, charring composite material
    PhD, VPI&SU, 1984. DA8418214.
  628. BW Boyle
    A machine to test the friction and wear properties of a metal-matrix fibre reinforced journal bearing material
    Masters, Texas @ Austin, 1981.
  629. TH Boyle
    Tribological properties of Babbit metal matrix planar randomly oriented graphite fibre journal bearings
    Masters, Pennsylvania SU, 1986.
  630. MJ Bozarth
    Fibre orientation of carbon fibre reinforced PEEK and its effect upon thermoelastic properties
    Masters, Delaware, 1985.
  631. Vasilios Brachos
    The feasibility of using hook and loop fastening systems with advanced composites
    MS, Lowell, 1991. MA1342543. MA 29(2)313.
  632. PD Bradley
    The effect of wire reinforcement on the toughness of carbon fibre composites
    PhD, Nottingham, 1975. D20065/77.
  633. JS Bradley
    Carbon fibre reinforced plastics for orthopaedic implant
    PhD, CNAA: N.Staffs Poly, 1980. D33258/80.
  634. Douglas Bradley
    Investigation of the response of titanium-1100/SCS-6 fiber composites to thermal exposure
    PhD, University of Virginia, 1995.  AADAAI9525046  DAB56(4)2261
  635. James Perrey Bradtmueller
    Evaluation of interlaminar shear moduli of structural wood composites via five-point bending test
    PhD, Purdue University, 1992.  AAD9313954  DAIB54(1)27
  636. TE Brady
    The flow of fibre suspensions
    Masters, Dartmouth(US), 1968.
  637. Richard L Brady
    Interfacial studies in fibre-reinforced thermoplastic-matrix composites
    PhD, Massachusetts, 1989. DA9001485. DAIB 50(8)3641.
  638. Arthur Martins Barbosa Braga
    Wave propagation in anisotropic layered composites
    PhD, Stanford, 1990. DA9102233. DAIB 51(8)3926.
  639. Saumil Ranjitbhai Brahmbhatt
    An evaluation of weld line strengths for a long glass fiber reinforced styrene/maleic anhydride copolymer
    MSEng, University of Lowell, 1992.  AAD1347877  MA30(4)1477
  640. CJ Brain
    Buckling of filament reinforced plastic plates
    MSc, Cranfield IT, September 1969.
  641. TR Branca
    Creep of a uniaxial metal matrix composite subjected to axial and normal lateral loads
    PhD, UIUC, 1971. DA7206871.
  642. N Brand
    Dimensionierungshilfe fur dynamisch beanspruchte kunststoff bauteil
    [Shell design for fatigue stressed plastic structural components]
    Dissertation, RWTH Aachen, 1977. DS7706.
    >>> W van den Brande, see W Van den Brande.
  643. JL Braswell
    The effects of geometry on the design of filament-wound fiberglass tension lugs
    MS, TA&MU, December 1981.
  644. HP Braun
    Theoretical and experimental investigations concerning the problem of quasi-static crack propagation in 2 component materials subject to residual stresses
    Thesis, Karlsruhe, 24 November 1979. In German. INIS-MF-6452.
  645. YaA Brauns
    Carrying capacity of cylindrical shells made of polymer materials under axial compression and external pressure.
    Dissertation, Riga, 1974.
  646. LD Bravenec
    Environmental effects on the viscoelasticity of neat and filled polymeric solids
    PhD, Delaware, 1983. DA8412700.
  647. James Bruin Brayshaw
    Consistent formulation of the method of cells: micromechanics model for transversely isotropic metal matrix composites
    PhD, University of Virginia, 1994.  AAD9425724  DAIB55(5)1946
  648. EP Breeze
    Improved methods for dispensing polyester dough moulding compounds
    MPhil, Nottingham, 1989. ASLIB 39(3)7739.
  649. John Edward Brennan
    The crystallisation of polyetheretherketone (PEEK) from the glass
    PhD, UIUC, 1988. DA8908628. DAIB 50(2)707.
  650. MJ Brenner
    The influence of processing, morphological and composite parameters on the time dependent properties of reinforced reaction injection (RRIM) polyurethane elastomers
    PhD, Liverpool, May 1984. D53776/85.
  651. Stephane Bres
    Contributions a la quantification des criteres de transparence et d'anisotropie par une approche globale: application au controle de qualite de materiaux composites
    Dr, Institut National des Sciences Appliquees de Lyon, 1993, AADC511075, DAIC57(4)1339.
  652. RR Bresee
    Thermal shrinkage mechanisms of polyethyleneterephthalate fibres
    PhD, Florida SU, 1979. DA7926723.
  653. RES Bretas
    Viscoelastic properties of filled polymer melts
    DSc, Washington University-MO, 1983.
  654. Thomas M Breunig
    Nondestructive evaluation of damage in silicon carbide/aluminium metal matrix composite using X-ray tomographic microscopy
    PhD, Georgia IT, 1992. DA9223769. DAIB 53(4)2007.
  655. JC Brewer
    The effect of ply thickness on the free edge delamination of graphite/epoxy laminates
    Masters, MIT, 1985.
  656. DN Brewer
    Diffusion of water into adhesive bonds
    Masters, CWRU, 1988.
  657. John Charles Brewer
    Failure of graphite/epoxy induced by delamination
    PhD, MIT, 1988. DA0378814.
  658. Sharon Lorraine Bridal
    Acoustic microscopy and polar backscatter broadband ultrasonic investigations of anisotropic inhomogeneous media
    PhD, Washington University, 1994.  AADAAI9523269  DAB56(3)1474
  659. M Briceno
    A time integration procedure for elasto-viscoplastic constitutive equations of the internal variable type
    SM, MIT, 1985.
  660. JJ Brickley
    An analysis of the propagation of extensional and torsional waves in a semi-infinite cylindrical membrane of helically-oriented orthotropic materials using the method of characteristics
    Masters, VPI&SU, 1972.
  661. JC Briggs
    Automated handling of flexible materials
    Masters, MIT, 1988.
  662. PF Bright
    Factors influencing fibre orientation and product performance in fibre reinforced thermoplastics injection mouldings.
    PhD, Cranfield IT, November 1980. D37264/81.
  663. AJ Brightley and MW Mead
    Construction and test of composite microlight wing structure
    Thesis, Bristol, June 1986. BU-341. ETN-87-99204. N87-19392.
  664. RP Briley
    Effects of hygrothermal conditioning on the dynamic behaviour of resin matrix composites
    PhD, Georgia IT, December 1980. DA8124282. N82-13172.
  665. PP Bringmann
    Determination of shear strength distributions for graphite/epoxy composite materials
    Masters, Kansas, 1978.
  666. H Brintup
    Beitrag zum zeitabhangigen verformungsverhalten und zer rissbildung orthotrop glasfaserverstarkter ungesattigter polyester-harze unter ebener normalbeanspruchung
    [Study of time dependent deformation and crack formation in orthotropic glassfibre reinforced unsaturated polyester resin under uniform transverse stress]
    DIng, RWTH Aachen, 27 June 1975. DS7506.
  667. H Briscall
    Filament wound resin composites: preparation and elastic properties
    MSc, Salford, 1986. D72413/87. ASLIB 37(2)4148.
  668. RA Britton
    Stoichiometric effects on the dynamic mechanical properties of an epoxy resin
    MS, Washington University-MO, 1977.
  669. AJ Britton
    Creep rupture in injection moulded short glass fibre reinforced thermoplastics
    MSc, Cranfield IT, 1984.
  670. GD Brooks
    A general study of hybrid composite laminates
    Masters, AFIT WPAFB, December 1977. AFIT/GAE/AA/77D-2. AD A048 364.
  671. EW Brooks
    Advances in moire interferometry for thermal response of composites
    Masters, VPI&SU, 1982.
  672. KA Brooks
    Investigation of some factors affecting the quality of thermoset mouldings
    MPhil, Loughborough, July 1983.
  673. WG Brooks
    The design, construction and test of a postbuckled carbon fibre reinforced plastic wing box
    PhD, Cranfield IT, November 1987. DX82023. ASLIB 38(2)4407.
  674. FJ Broth
    Axisymmetric buckling of orthotropic circular plates with variable thickness
    Masters, PINY Brooklyn, 1966.
  675. WR Broughton
    Shear properties of unidirectional carbon fibre composites
    PhD, Cambridge, 1990. ASLIB 39(3)7358.
  676. Maurice Brouha
    Design and construction of laminate trim and drill fixtures for routing aircraft skins and covers
    MA, CSULB, 1988. MA1335905. MA 27(4)512.
  677. HR Brouwer
    Nonlinear viscoelastic characterisation of transversely isotropic fibrous composites under compression loading.
    PhD, VUB-Brussels, 1986.
  678. SJ Brown
    Linear theory of sandwich plates under small deformation.
    Masters, Florida, 1968.
  679. GR Brown
    Creeping flow of fluids through assemblages of elliptical cylinders and its application to the permeability of fibre mats.
    PhD, Lawrence Univ: Inst.Paper Chemistry, 1975. DA7528958.
  680. RA Brown
    The effect of water on the dynamic mechanical properties of glass fibre-reinforced epoxy resins
    Masters, Texas @ Austin, 1975.
  681. GE Brown
    Progressive failure of advanced composite laminates using the finite element method
    Masters, AFIT & Utah, March 1976. AD A043 749. AFIT-CI-77-59.
  682. AD Brown
    The use of carbon fibre reinforced cement as tensile reinforcement for concrete structural elements
    PhD, Bath, 1987. ASLIB 37(4)8286.
  683. HW Brown
    Higher order theory analysis of a modified free edge delamination specimen
    PhD, Ohio SU, 1987.
  684. JW Brown
    Optimisation of composite mode I delamination fracture toughness
    MS, TA&MU, 1988.
  685. Lloyd Douglas Brown
    Observations on the mechanical integrity of a thin-film composite interface model
    PhD, Texas @ Austin, 1988. DA8909624. DAIB 50(2)708.
  686. Neil R Brown
    The effects of interfacial reaction zones on the mechanical properties of magnesium metal matrix composites
    PhD, Northwestern University, 1993.  AAD9327159  DAIB54(5)2689
  687. DJ Brownell
    Effects of atmosphere on S-glass and S-glass/epoxy composites
    Masters, Iowa SU, 1981.
  688. CE Browning
    The mechanisms of elevated temperature property losses in high performance structural epoxy resin matrix materials after exposure to high humidity environments
    PhD, Dayton, March 1977. DA7904241 AFML TR 76 153, August 1976. AD A039 754.
  689. JMW Brownjohn
    Assessment of structural intagrity [of GRP lattice frames] by dynamic measurements
    PhD, Bristol, April 1988.
  690. H Brueckmann
    <flexural fatigue of CFRP>
    Thesis, Karlsruhe, 1979.
  691. OS Brueller
    Energiebetrachtungen zum versagen von polymeren
    [Energy consideration for failure of polymers]
    Dissertation, TH Aachen, 1978. DS7812.
  692. Ronald Brugger
    Zur Schubtragfaehigkeit von Verbundknoten
    Dr Techn, Universitaet Innsbruck (Austria), 1993, AADC507102, DAIC57(4)1366.
  693. D Brunnschweiler
    The mechanical properties of braids in relation to their structural geometry
    MScTech, Manchester, 1953!.
  694. FN Bruns
    An analysis of the continuing use of load-bearing sandwich panels
    Masters, Missouri-Rolla, 1983.
  695. Michiel Vincent Bruschke
    A predictive model for permeability and non-isothermal flow of viscous and shear-thinning fluids in anisotropic fibrous media
    PhD, University of Delaware, 1992.  AAD9301788  DAIB53(9)4898
  696. TR Brussat
    Line-inclusion models of failure mechanisms in fibre composites
    PhD, UCLA, 1973. DA7328676.
  697. PS Bryan
    An approach to ideal twist distributions in tiltrotor VTOL blade designs using composite materials tailored to produce extension-twisting coupling behaviour
    Masters, RPI, 1987.
  698. Sheryl Kay Bryan
    A generalised thermomechanical constitutive model for metal matrix composites with plastic strain and damage
    PhD, TA&MU, 1988.  DA8913333.  DAIB 50(4)1595.
  699. RB Bubeck
    Transient thermal stress analysis of composite structures including continuously varying properties
    Masters, NPS Monterey, 1975
  700. David Leigh Buchanan
    Mesomechanics of viscoplastic metal matrix composites
    DSc, Washington Univ-MO, 1991. DA9209163. DAIB 52(10)5483.
  701. Richard Andrew Bucher
    High performance thermoplastic matrix composite processing: dry powder prepregging, plasma treatment, consolidation/crystallization analysis
    PhD, Virginia Polytechnic Institute and State University, 1994.  AADAAI9520723 DAB56(3)1643
  702. RG Buchheit
    Processing and properties of cast aluminium matrix composites reinforced with discontinuous aluminium oxide fibres
    Masters, Virginia, 1987.
  703. RB Bucinell
    A stochastic delamination growth model for fatigue loaded laminated composite materials
    PhD, Drexel, 1987. DA8712926.
  704. G Buck
    Finite element analysis of a metal matrix tensile coupon with a central slot
    Masters, Kansas, 1988.
  705. LJ Buckley
    Kinetics of a sterically hindered amine cured epoxy resin system
    Masters, MIT, 1981.
  706. MB Buczek
    Finite element models for predicting crack growth characteristics in composite materials
    MS, VPI&SU, October 1982. VPI-E-82-29. NASA-CR-169-478.
  707. Matthew Bernard Buczek
    Process control of advanced polymeric composites
    PhD, University of Dayton, 1994.  AAD9501814  DAIB55(8)3521
  708. CL Budde
    Interlaminar shearing behaviour of filamentary composite materials-assumed displacement method
    Masters, MIT, 1970.
  709. E Buelens
    Optimisation of interlaminar fracture toughness in 2.5-D composites
    Engineering thesis, KUL, 1988. In Dutch.
  710. R Bues
    Einfluss des Alterungszustandes von Prepregmaterial auf den Verarbeitsprozess und die Eigenschaften von kohlenstofffaser-verstarkten Faserverbundwerkstoffen
    Experimental thesis, IKV Aachen, 1989.
  711. V Buffa
    Processing-morphology-property relationships of modified epoxy/amine cured networks
    Masters, PI Brooklyn, 1987.
  712. DR Bugler
    Ultrasonic studies of fibre reinforced materials
    PhD, UMIST, 1975!.
  713. KJ Buhariwala
    Dynamic response of viscoelastic fibre reinforced composite structures
    Masters, Toronto, 1982.
  714. KJ Buhariwala
    Dynamics of [FRP] viscoelastic structures.
    PhD, Toronto, 1985.
  715. K-P Buhmann
    Beitrag zur zerstorungsfreien Prufung erster irreversibler Vorgange in glasfaserverstarkten Kunststoffen
    [Contribution to nondestructive testing of first irreversible processes in glassfibre plastics]
    DIng, TU Hannover, 1975. UCRL-TRANS-11287, October 1977.
  716. CL Buhrmaster
    Microstructure effects on delamination fracture toughness in polycarbonate carbon composites
    Masters, RPI, 1987.
  717. KD Buie
    A finite element model for laminated composite plates with matrix cracks and delaminations
    Masters, TA&MU, 1988.
  718. A Bulacio
    Effect of internal joints on the mechanical behaviour of glass reinforced polyesters
    Masters, Boston, 1973.
  719. FJ Bulavs
    Long term strength of oriented reinforced plastics under plane loading
    Dissertation, Riga, 1969.
  720. FJ Bulavs
    Structural mechanics of reinforced plastics under short-time and long-time loading
    Doctorate, Riga, 1988.
  721. Vijay Prasad Bulla
    Analysis of sandwich plates subjected to blast loading
    MS, Western Michigan University, 1993.  AAD1355518  MA32(3)1002
  722. WM Bulleit
    Behaviour of fibreglass reinforced particle-board beams and plates in flexure
    PhD, Washington SU, 1980. DA8025909.
  723. DC Bulloch
    A solution to the axisymmetric anisotropic heat flow problem by the finite element method
    Masters, Louisiana SU, 1969.
  724. VN Bulmanis
    Allowance for physical nonlinearity in evaluating the state of stress of thick-walled composite rings
    Dissertation, Riga, 1974.
  725. Linda Jane Bulmer
    In-plane permeability of reinforcements for liquid moulding processes
    PhD, University of Nottingham, 1994.  AADAAIC404168  DAB56(2)538
  726. Stanley Eugene Bumpas
    Free vibration of thick isotropic and orthotropic cylindical shells
    PhD, California: Davis, 1991. DA9206213. DAIB 52(9)4819.
  727. RL Bunn
    Ablation studies on composite materials
    PhD, CNAA: Manchester, 1981.
  728. LG Bunton
    Ultrasonic and electrical studies of cure in epoxy
    MSc, Strathclyde, 1982.
    >>> E Bunyanin, see B Elbirli.
  729. Mark Anthony Buonanno
    The effect of processing conditions and chemistry on the electrochemistry of graphite and aluminum metal matrix composites
    PhD, Massachusetts Institute of Technology, 1992.  AAD0572316  DAIB53(7)3738
  730. A Burakiewicz
    Adhesion of fibres to the matrix in fibre reinforced composites
    PhD, IFTR Warsaw-Poland, 1979.
  731. GS Burd
    An automatic finite element mesh generator and adaptive geometry data base for tracking general two dimensional crack growth
    MS, RPI, 1984.
  732. SJ Burden
    Tensile and impact behaviour of nickel-base composite materials
    PhD, Drexel, 1975. DA7514401. N75-27079.
  733. A Burger
    Kohlenstoffaserverstaerkte Polymere und deren thermischer Abbau bis zu Kohlenstoff-Kohlenstoff verbundwerkstoffen
    [CFRP and its thermal degradation to carbon/carbon composites]
    Dipl.Ing, Karlsruhe, 1973.
  734. I Buric
    Heat exchange in moulds for injection moulding of thermosets
    Diploma, Zagreb, 1983.
  735. S Burkhardt
    Zeitabhangiges Verhalten von Sandwichelementen mit Metalldeckschich-ten und Stutzkernen aus Polyurethanharschaumstoffen
    Dissertation, Karlsruhe, 1988.
  736. G Burkhardt
    Neue Messtechniken zur Uberwachung der Verarbeitung faserverstarkte Duromere
    [New method of cure monitoring for fibre composites]
    Dissertation, RWTH Aachen, 1989.
  737. JS Burns
    Pin loading of graphite/epoxy plates
    Masters, Utah, 1985.
  738. Stephen William Burns
    Mechanics of load transfer in cable-reinforced materials
    PhD, University of Illinois at Urbana-Champaign, 1992.  AAD9236408  DAIB53(7)3582
  739. James Scott Burns
    The influence of aligned, long-fiber array (alfa) reinforcements on composite manufacturing and structural performance
    PhD, University of Delaware, 1995, AADAAI9611481, DAIB56(12)6880.
  740. Scott Thomas Burr
    Characterisation of damage mechanisms and behaviour in two-dimensionally braided composites subjected to static and fatigue loading
    PhD, Virginia Polytechnic Institute and State University, 1996, AAD9707219, DAIB57(9)5738.
  741. SH Burroughs
    Buckling characteristics of fibreglass filament wound NOL rings
    Masters, Vermont, 1965.
  742. KS Burson
    Internal friction studies of a Kevlar epoxy system
    Masters, Nebraska, 1987.
  743. Christian Burtin
    Comportement au choc de structures tubulaires materiaux composites
    [Crash-impact behaiour of tubular composite structures]
    Doctorate, INSA Lyon, 1988. DAC075864. DAIC 50(3)563.
  744. JT Burwasser
    Electrothermal curing of filament wound composite cylinders
    Masters, Stanford, 1986.
  745. Roger Stanley Bushby
    Joining aluminium-based composites using diffusion bonding techniques
    PhD, University of Bath, 1993.  AADC332412  DAIC55(1)292
  746. Tarunjit Butalia
    Dynamic response of advanced composite plates subjects to low velocity impact
    PhD, Ohio State University, 1996, AAD9639197, DAIB57(7)4569.
  747. BL Butler
    Effects of carbon fibre microstructure on shear strength of carbon epoxy composites
    PhD, RPI, September 1969. DA7019934.
  748. Elizabeth Patricia Butler
    Toughening mechanisms in fiber-reinforced ceramic-matrix composites
    PhD, Lehigh University, 1993.  AAD9325936.  DAIB54(4)2142
  749. AN Butt
    Resin flow characterisation during thermoplastic composite consolidation
    MS, Georgia IT, 1988.
  750. GC Butts
    Laminated rigid and viscoelastic leaf flexure stiffness and damping design equations
    Masters, CSULB, 1980.
  751. JE Byrtus
    Response of delaminated composite panels to air blast loading
    Masters, MIT, 1988.
  752. Chansup Byun
    Free vibration and nonlinear transient analysis of imperfect laminated structures
    PhD, VPI&SU, 1991. DA9214570. DAIB 52(12)6516.
  753. Joon-Hyung Byun
    Process-microstructure-performance relationships of three-dimensional textile composites
    PhD, Delaware, 1991. DA9223673. DAIB 53(4)2018.
  754. Kook Yun Byun
    Thermal residual stress-strain analysis for composite materials using high sensitivity Moiré interferometry
    PhD, University of Missouri - Rolla, 1992.  AAD9311021  DAIB53(12)6501.
    >>> CW Cable, see RD Thomas.
  755. A Cabrera
    Acoustic emission of adhesively bonded fibre reinforced composite structures
    Masters, MIT, 1982.
  756. MT Cackett
    Design considerations & failure analysis of a pin loaded hole in an orthotropic composite laminate
    MSc, RPI, August 1983.
  757. Brian David Caddock
    The influence of diffusion processes on the stress-corrosion of E-glass/polyester composites
    PhD, Liverpool, October 1987. DX90852. ASLIB 39(2)5176. DAIB 51(8)4004. DAIC 50(1)137.
  758. Carl McElhinney Cady
    Experimental study of damage in ceramic fiber-reinforced ceramic matrix composites
    PhD, University of California, 1994.  AADAAI9524116  DAB56(3)1644
  759. Z Cai
    Moulding behaviour of composites
    SM(ME), MIT, 1986.
  760. Zhong Cai
    Simulation of the manufacture of closed shape composite structures
    ScD, MIT, 1990. DA-382019.
  761. Cai Xiaopeng,  see C Xiaopeng
  762. Dominique Caille
    Synthese et proprietes de reseaux a base d'epoxy et d'isocyanate
    [Synthesis and properties of epoxy/isocyanate-based networks]
    Doctorate, INSA Lyon, 1991. DA-C217398. DAIC 53(2)344.
  763. DS Cairns
    Moisture and thermal expansion of composite materials.
    MS, Wyoming, November 1981. AD A109 131. N82-19323. UWME-DR-101-104-1.
  764. Douglas Scott Cairns
    Impact and post impact response of laminated structures
    PhD, MIT, 1987. DA0377596.
  765. Emilio P Calius
    Filament winding of composite cylinders
    PhD, Stanford, 1989. DA8925840. DAIB 50(7)3025.
  766. Hung Lap Cam
    Buckling of rectangular anisotropic plate by the Ritz method
    MS, CSULB, 1990. MA1341148. MA 29(1)138.
  767. CJ Camarda
    Experimental investigation of graphite/polyimide sandwich panels in edgewise compression
    MS, PINY Brooklyn, June 1974, NASA TM-84182. N82-23269.
  768. NM Cameron
    An investigation into the effects of environmental treatments on strength of E-glass fibres
    PhD, UIUC, 1965. DA6507082.
  769. S Campanini
    Studio di tecniche non distruttive per la localizzazione nello spessore dei difetti di laminati compositi
    {NDT study of defect localisation through-the-thickness in laminates}
    Thesis, Politecnico di Milano, 1990.
  770. ET Camponeschi
    Investigation of stiffness reduction as an indicator of fatigue damage in graphite epoxy-composites
    Masters, VPI&SU, February 1980.
  771. Eugene Thomas Camponeschi
    Compression response of thick-section composite materials
    PhD, Delaware, 1990. DA9109934. DAIB 51(11)5534.
  772. RJ Cann
    A fracture mechanics approach to static and fatigue failure in glass reinforced plastics
    PhD, Nottingham, 1977. D24496/78.
  773. RK Cannon
    The effects of ply dropoffs on tensile fracture behaviour of graphite/epoxy laminates
    Masters, AFIT & MIT, 1987.
  774. WJ Cantwell
    High velocity impact damage in CFRP structures
    MSc, London: ICST&M, September 1982.
  775. WJ Cantwell
    Impact damage in carbon fibre composites.
    PhD, London: ICST&M, 1985. ASLIB 36(2)4088.
  776. Sridhar Canumalla
    Processing and mechanical behavior of a short fiber reinforced metal matrix composite
    PhD, The Pennsylvania State University, 1995.  AADAAI9531880 DAB56(6)3279
  777. Hengchu Cao
    Mechanical aspects of interfaces in high-performance composites
    PhD, California: Berkeley, 1988. DA8916605.  DAIB 50(4)1596.
  778. Feng Cao
    Fracture and welding of injection molded polypropylene and short glass fiber reinforced polypropylene
    MS, Michigan State University, 1994. AAD1357870  MA33(1)242
  779. VS Captain
    The effect of inextensibility on elastic surface and interfacial waves
    PhD, UEA Norwich, September 1987. D80629.
  780. AA Caputo
    Elastic-plastic response of a class of reinforced composite materials
    PhD, S.California, 1968. DA6810223.
  781. AS Cararra
    Effect of fibre end geometry on the stresses in a resin-glass composite
    Masters, MIT, 1967.
  782. MF Card
    Elastic constants for filament-wound cylinders
    Masters, VPI&SU, 1964.
  783. MF Card
    The sensitivity of buckling of axially compressed fibre-reinforced cylindrical shells to small geometric imperfections
    PhD, VPI&SU, June 1969. DA7009909. NASA-TM-X-61914. N69-40244.
  784. T Carlberg
    Solidification of composite materials on earth and under microgravity
    Tekn.dr, KTH Stockholm, 1979. TRITA-DISS-1209.
  785. JG Carlisle
    Hard-body impact damage effects on boron-aluminium composites
    MS, AFIT WPAFB, March 1974. GAM/MC/74-M-1. AD 780 612. N74-32032.
  786. JO Carlsson
    Chemical vapour deposition of boron in a closed system.
    Doctoral thesis, Uppsala, 1979.
  787. JM Carlyle
    Acoustic emission in fibre reinforced composites
    MTech, Brunel-NADC Warminster, September 1974. AD A012 382.
  788. Cheryl Lynn Carlson
    The influence of matrix modification on the properties of 3-D woven composites
    PhD, North Carolina State University, 1995, AADAAI9604808, DAIB56(10)5751.
  789. Lee Ann Carman
    Surface chemistry of calcium-boroaluminosilicate glass fibres
    PhD, Pennsylvania SU, 1989. DA8922029. DAIB 50(7)3093.
  790. Gregory Paul Carman
    Micromechanics of finite length fibres in composite materials
    PhD, VPI&SU, 1991. DA9204632. DAIB 52(11)5918.
  791. N Carmely
    Optimisation of thin-walled FRP container under external pressure
    MSc, Technion-IIT Israel, 1975.
  792. TG Carne
    Load-absorption and interaction of two filaments in a fibre-reinforced material
    PhD, CIT, 1973. DA7307283.
  793. WO Carnes
    The fracture energy of composite materials
    Masters, Vermont, 1968.
  794. FD Carozzo
    Experimental procedure for lifetime testing of graphite bundles under constant load
    Masters, NPS Monterey, March 1986. AD A167 714. N87-10186.
  795. DM Carper
    Large deformation behaviour of long shallow cylindrical composite panels
    Masters, VPI&SU, 1983.
  796. DA Carr
    Ultrasonic detection and colour imaging of damaged zones in a glass epoxy composite material
    Masters, Pennsylvania SU, 1986.
  797. DH Carrillo
    Fatigue behaviour of glass fibre fortified thermoplastics
    Masters, Illinois IT, 1969.
  798. WE Carroll
    On couple-stresses in a fibre composite material
    Masters, South Florida, 1968.
  799. DR Carroll
    The rheology of some thermosetting polymers
    Masters, TA&MU, 1982.
  800. Douglas Rickman Carroll
    The effect of temperature and imperfect bonding on the mechanical properties of ceramic matrix composites
    PhD, Missouri: Rolla, 1991. DA9133816. DAIB 52(9)4930.
  801. Malachy Simon Carroll
    Lay-up and rate effects on fibreglass/epoxy laminates and tubulars
    MSc, University of Alberta (Canada), 1994, AADMM11171, MA35(1)323.
  802. Stephen William Carson
    An investigation of the influence of production parameters on the strength of glass fibres
    PhD, Alfred, 1989. DA8919386. DAIB 50(6)2576.
  803. WS Carswell
    The nature of failure in glass reinforced plastics, particularly under conditions of fatigue and creep
    PhD, Strathclyde, 1971!.
  804. CV Carter
    Composition and structure of stress relieving removable epoxy resin
    Masters, New Mexico, 1975.
  805. DH Carter
    SiC whisker reinforced MoSi2
    Masters, MIT, 1988.
  806. Harold Wayne Carter
    The effect of temperature on galvanically induced hydrolysis of graphite/BMI composite in 3.5% sodium chloride solution
    MS, University of Texas at Arlington, 1992.  AAD1348835  AADMM69667  MA31(1)411
  807. JS Cartner
    The nonlinear viscoelastic behaviour of adhesives and chopped fibre composites
    Masters, VPI&SU, 1978.
  808. WM Carty
    The development of glass-ceramic matrix composites and the crystallisation of two glass-ceramic matrices
    Masters, Missouri-Rolla, 1987.
  809. JJ Caruso
    Application of finite element substructuring to composite micromechanics
    MS, Akron, May 1984. NASA-TM-83729, August 1984. N84-31288.
  810. JR Casarini
    Mechanical and thermal properties of sialon alumina composites
    PhD, Utah, 1978. DA7815526.
  811. Scott Wayne Case
    Mechanics of fiber-controlled behavior in polymeric composite materials
    PhD, Virginia Polytechnic Institute & State University, 1996, AAD9637448, DAIB57(7)4651.
  812. JJ Cassidy
    The relationship between mechanical and architectural properties in anisotropic cancellous bone
    Masters, CWRU, 1984.
  813. B Castagnede
    Mesures de constantes elastiques de solides anisotropes par une methode ultrasonore
    [Ultrasonic measurement of elastic contants for anisotropic solids]
    PhD #2001, Bordeaux-I, 1984.
  814. F Castino
    Strength and toughness of Kevlar-epoxy composites
    MEngSc, Sydney-Australia, March 1983.
  815. RR Castles
    Theory of exterior and harmonic eigenstrains
    PhD, Northeastern, 1983. DA8403394. N84-26065.
  816. JM Castro
    Mould filling and curing studies for the polyurethane reaction injection moulding process
    PhD, Minnesota, 1980. DA8109399.
  817. EM Caulfield
    Investigation of stress, temperature and time dependent strains in a randomly oriented fibre reinforced composite with special emphasis given to thermal stress situations
    PhD, UIUC, 1979. DA7915328. N79-28230.
  818. T Caulfield
    Understanding the interdiffusional flux related effects on the high-temperature compatibility of tungsten fibre reinforced superalloy (TFRS) composites
    EngSc.D, Columbia, 1986. DA8623494.
  819. JY Cavaille
    Etude par spectrometrie mecanique de la mobilite moleculaire dans des alliages polymers non-cristallins de compatibilite differente [Mechanical spectroscopic study of molecular mobility in mixtures of amorphous polymers with different compatibilities]
    These d'etat, INSA Lyon, 1987.
  820. P Cawley and CJ Pye
    Nondestructive testing of structures
    BSc, Bristol, 1975.
  821. P Cawley
    Defect location in structures by a vibration technique.
    PhD, Bristol, November 1978. N80-21797.
  822. D Cawthorne
    Strength and toughness of dough moulding compounds.
    DPhil, Sussex, 1973. D20844/77.
  823. JA Cecere
    Structure property relationships of functionalised modifiers for thermosetting resin systems
    PhD, VPI&SU, 1988. DA8817400. DAIB 49(7)2800.
  824. G Cederbaum
    Random vibration and reliability of laminated plates
    PhD, Tel-Aviv, 1988.
  825. AR Cederberg
    Analysis of filament winding for axisymmetric shells.
    Masters, Nebraska, 1974.
  826. Roberto de la Cruz Centeno-Lara
    Contribution a l'evaluation des contraintes internes dans les plaques composites generees par le thermodurcissement des matrices
    [Study of internal stresses generated in composite plates during curing of the epoxy matrix]
    Doctorate, INSA Lyon, 1987. DA-C070131. DAIC 50(2)367.
  827. B Ceres
    Electrical treeing in polypropylene
    MSc, Delaware, 1982.
  828. ME Cerkovnik
    Finite element programs for orthotropic axisymmetric structures
    Masters, SDSU, 1987.
  829. Carlos Eduardo Stolf Cesnik
    Cross-sectional analysis of initially twisted and curved composite beams
    PhD, Georgia Institute of Technology, 1994.  AAD9434814  DAIB55(8)3428
  830. SE Chacra
    Boron-coated fibres
    Masters, Rochester, 1973.
  831. Daniel Allen Chafey
    Investigation into toughness improvement in graphite/epoxy composites using Teflon powder
    MS, San Jose State University, 1993.  AAD1352999  MA31(4)1904
  832. Hassan Chaffoui
    Mechanical behavior modelling of belt conveyor with three-dimensional textile structure
    Modelisation du comportement mecanique des bandes transporteuses a structure textile 3D: homogenisation - elements finis
    PhD, Institut National des Sciences Appliques de Lyon, 1992.  AADC299226  DAIC54(3)892
  833. H Chai
    The growth of impact damage in compressively loaded laminate
    PhD, California IT @ Pasadena, May 1982. DA8216033.
  834. Li Chai
    Non-steady state cracking in unidirectional composites
    PhD, Missouri-Rolla, 1990. DA9032099. DAIB 51(6)3083.
  835. Gin Boay Chai
    The effect of geometry and prescribed delaminations on the postbucking behavior of laminated carbon-fibre reinforced plastics panels
    PhD, University of Strathclyde, 1988. AADD097064  DAIB53(6)3092
  836. M Chaikin
    Stress pulse propagation in textile materials
    PhD, Leeds, 1953!.
  837. A Chailleux
    Etude thermique et experimentale de la stabilite de poutres droites elastiques en materiaux composites chargees axialement [Thermal and experimental study of the stability of linear-elastic beams in composite material loaded axially]
    Doctorate, Paris, 1973.
  838. Elizabeth Abraham Chakachery
    Deformation micromechanisms in polymeric matrices and carbon fibre-reinforced composites
    PhD, TA&MU, 1989. DA8921691. DAIB 50(6)2576.
  839. A Chakar
    Composites a base de matrice elastomere polyurethannes et des fibres unidirectionelles, synthese et propietes [Unidirectional fibres and polyurethane elastomer based composites, synthesis and properties]
    PhD, Inst.Nat.Sci.Appl.France, 1983. IDI-18309. A84-11992.
    Translation: NASA-TM-77501, August 1984. N85-15826.
  840. M Chakraborty
    A study of the impact characteristics of fibre reinforced composite shells and a comparison with steel shells.
    Masters, Oklahoma, 1978.
  841. Tammy Marie Chalmers
    Structure and properties of a new thermoplastic semicrystalline polyamine and its fiber reinforced composite
    PhD, University of Akron, 1994.  AADAAI9517837 DAB56(1)262
  842. Damien Jean Chambolle
    Fracture of short fiber-reinforced metal matrix composites: aluminium/silicon carbide
    Etude sur la rupture des composites a matrice metallique et a renforts discontinus: aluminium/carbure de silicium
    Dr, Ecole Centrale des Arts et Manufactures, 1990.  AADC286519  DAIC54(2)622
  843. Frederic Chambon
    Fabrication and mechanical properties of aluminium matrix composites reinforced by silicon carbide whiskers
    Elaboration et proprietes mecaniques de composites a matrice d'alumine renforcee par des trichites de carbure de silicium
    MScA, Ecole Polytechnique Montreal - Canada, 1991.  AADMM69667  MA31(1)411
  844. CC Chamis
    Design oriented analysis and synthesis of multilayered
    filamentary structural panels
    PhD, CWRU, September 1967. DA6810146.
  845. G Champagne
    Etude electronique des energies interfaciales a l'aide de capillaires de verres et de polyethylene
    [Electronic study of interfacial energies using glass and polyethylene capillaries]
    Masters, Sherbrooke, 1983.
  846. Luc Champoux
    Effet de L'humidite sur le comportement sous chocs repetes des composites stratifies (French text)
    MScA, Ecole Polytechnique Montreal (Canada), 1995, AADMM11484, MA35(1)323.
  847. DP Chan
    Analytical study on postbuckling of laminated anisotropic plates
    PhD, CWRU, January 1971. DA7122788.
  848. Y Chan
    On the influence of glass fibres on the rheological properties and processing of polymer melts
    Masters, Tennessee @ Knoxville, 1977.
  849. D Chan (formerly J Lerthanapredakul)
    Rheology of suspension
    DSc, Washington University-MO, 1983.
  850. WK Chan
    A study of the thermoelastic technique for stress analysis
    PhD, Manchester, 1987. ASLIB 39(3)7367.
  851. KS Chan
    On the effect of transverse shear on the stability of long composite cylindrical shells under external pressure
    Masters, Texas @ Austin, 1988.
  852. Albert W Chan
    Modelling of resin impregnation during the manufacture of polymer composites
    PhD, Cincinnati, 1991. DA9215485. DAIB 52(12)6528.
  853. VA Chander
    Analysis of the stress-strain-strain rate behaviour of a polyester resin
    Masters, Mississippi SU, 1974.
  854. Naresh Kotumal Chandiramani
    Nonlinear flutter of composite shear-deformable panels in a high-supersonic flow
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9407146  DAIB54(10)5248
  855. PJ Chandler
    Temperature distribution and fin effectiveness for a composite fin
    Masters, Louisiana PI, 1968.
  856. Paul Everett Chandler
    The effect of velocity inhomogeneous lossy and refractive media on the propagation of bounded ultrasonic pulses: applications to acoustical imaging
    PhD, California: Irvine, 1986. DA8626823. DAIB 47(8)3395.
  857. M Chandra
    Thermal expansion characteristics of carbon fibre fabric reinforced plastics
    PhD, Salford, 1981.
  858. PS Chandrasekaran
    A critical analysis of bus coach for weight reduction
    MS, IIT-Madras, 1983.
  859. S Chandrashekara
    Laminated plate analysis by hybrid stress finite element method
    Masters, Georgia IT, 1977.
  860. S Chandrashekara
    Free vibration analysis of layered plates and composites by a mixed method: state space approach
    PhD, Georgia IT, 1982. DA8229886. N83-28484.
  861. K Chandrashekhara
    Geometric and material nonlinear analysis of laminated composite plates and shells
    PhD, VPI&SU, November 1985. DA8605434.
  862. Chi-Sing Chang
    Some two-dimensional elastostatic boundary value problems of composite materials
    PhD, Cornell, 1968. DA6806589. Cornell Mat Sci Ctr Rpt 818.
  863. H-C Chang
    Nonlinear bending of circular sandwich plates with strong core
    Masters, Tennessee TU, 1968.
  864. Y-I Chang
    Vibration of spherical sandwich shell
    Masters, Tennessee TU, 1969.
  865. CI Chang
    Mechanical properties of fibre reinforced composites
    PhD, Cornell, 1971. DA7207550.
  866. Shyhming Chang
    Inplane, flexural, twisting and thickness shear coefficients for stiffness and damping of a monolayer filamentary composite
    PhD, Oklahoma, 1972. DA7223090.
  867. MS Chang
    Plastic deformation processing and compressive failure mechanisms in metal composites
    PhD, Cornell, 1973. DA7413749.
  868. SN Chang
    A study of the glass-silane-epoxy system
    Masters, Texas @ Austin, 1976.
  869. L Chang
    A high order shell theory for composite laminated shell.
    Masters, Washington University-MO, 1978.
  870. PN-H Chang
    Finite element analysis of laminated plates and shells.
    PhD, S.California, 1978.
  871. BW Chang
    Shear characterisation of glass-epoxy
    Masters, Tennessee TU, 1980.
  872. CP Chang
    Fourier transform infrared spectroscopic investigation of fibre-matrix interface in fibreglass reinforced epoxy composites.
    PhD, CWRU, 1981.
  873. SL Chang
    Prediction and measurement of orientation distribution effects on the stiffness and strength of short fibre and molecular composites
    DSc, Washington University-MO, 1981. DA8212343.
  874. TC Chang
    Longitudinal vibrations of a composite rod
    Masters, Tennessee TU, 1981.
  875. CMJ Chang
    Acoustic emission of local buckling of a thin graphite-epoxy tube
    MEng, RPI, May 1982.
  876. RJ-C Chang
    Generation and characterisation of particulate aerosols from virgin carbon fibres and composites
    PhD, Arkansas, 1983. DA8322962.
  877. F-K Chang
    Strength of bolted joints in laminated composites
    PhD, Michigan, 1983. DA8402258. N84-22992.
  878. J-S Chang
    Modelling the elastic behaviour of paper with regard to fibre orientation and fibre length distribution
    MS, Syracuse, 1983.
  879. LW Chang
    A study of woven fabric composites with moulded-in holes.
    Masters, Delaware, August 1985.
  880. J Chang
    Effects of an electropolymerised interlayer on the mechanical properties of graphite/epoxy composites.
    PhD, Connecticut, 1986. DA8710262.
  881. K Chang
    Progressive failure analysis for fibre reinforced laminated composites containing an open or a bolted hole
    Masters, Arizona SU, 1986.
  882. LW Chang
    A study of woven fabric composites with moulded-in holes
    Masters, Delaware, 1986.
  883. PT Chang
    Studies of nondestructive testing of materials
    Masters, Arizona SU, 1986.
  884. C-C Chang
    Finite element analysis of laminated composite free-edge delamination specimens
    PhD, Ohio SU, 1987. DA8804018.
  885. CK Chang
    Explosively formed piano-wire-reinforced aluminium sheet
    Masters, NMIMT, 1988.
  886. Shih-Ming Chang
    Melt rheology of long glass fibre-reinforced polypropylene
    MSEng, Lowell, 1989. MA1337140. MA 28(1)159.
  887. Min-Yung Chang
    Active vibration control of composite structures
    PhD, VPI&SU, 1990. DA9103512. DAIB 51(9)4436.
  888. Tao Chou Chang
    The effects of fibre surface treatment on the mechanical properties of graphite fibre/bismaleimide composites
    PhD, Auburn, 1991. DA9201202. DAIB 52(7)3834.
  889. Yeou Shin Chang
    The effect of the interphase/interface region on creep and creep rupture of thermoplastic composites
    PhD, VPI&SU, 1992. DA9224533. DAIB 53(4)2007.
  890. Jin-Der Paul Chang
    Theory of thick, laminated composite shallow shells
    PhD, Ohio State University, 1992.  AAD9307734  DAIB54(3)1485
  891. Whie Chang
    Modeling and numerical analysis of composite manufacturing processes
    PhD, University of Michigan, 1993.  AAD9409653  DAIB54(11)5893
  892. Yoonsang Chang
    Flexible optimization for drilling in composite and metal stacks
    PhD, Texas A&M University, 1993.  AAD9410726  DAIB54(11)5894
  893. Chih-Wei Chang
    Nondestructive measurements of electromagnetic parameters of anisotropic materials using an open-ended waveguide probe
    PhD, Michigan State University, 1995, AADAAI9605841, DAIB56(10)5622.
  894. Ravi Kumar Channa
    Damage prediction in composite structures due to low-velocity impact
    M.E.S, Lamar University - Beaumont, 1995.  AADAAI1374797 MA33(6)1902
  895. Mary Bee-Eng Chan-Park
    Improved polyester for automotive composites
    PhD, Massachusetts Institute of Technology, 1993.  AAD0573049  DAIB54(3)1601
  896. Tung-Lai Chao
    Minimum weight design of stiffened fibre composite cylinders
    PhD, CWRU, 1969. DA7025945.
  897. C-C Chao
    Optimisation of strength and stability of laminated composites
    PhD, Purdue, 1974. DA7517169. N75-31224.
  898. TKT Chao
    A study of mechanics of triaxial fabrics.
    MS, Georgia IT, 1975.
  899. WC Chao
    Finite element analysis of laminated composite plates.
    Masters, Oklahoma, 1980.
  900. DF-K Chao
    Numerical simulation of two-dimensional heat transfer in composite bodies with application to de-icing of aircraft component
    PhD, Toledo, November 1983. DA8316403. NASA-CR-168283. N84-13490.
  901. W-C Chao
    Geometrically nonlinear analysis of layered anisotropic plates and shells
    PhD, VPI&SU, March 1983. DA8316871. N84-14562.
  902. Lu-Ping Chao
    Multiobjective optimisation design strategies for articulating mechanisms and robotic manipulators fabricated from advanced polymeric fibre-reinforced composite materials
    PhD, Michigan SU, 1990. DA9111573. DAIB 51(12)6060.
  903. Ru-Min Chao
    Some effects of fibre-matrix interfacial debonding on the response of unidirectional ceramic matrix composite materials
    PhD, Pittsburgh, 1991. DA9137085. DAIB 52(7)3852.
  904. Chen-Ping Chao
    Thermomechanical constitutive modeling of irradiated fiber-reinforced polymer composites
    PhD, Ohio State University, 1994.  AAD9420935  DAIB55(3)1058.
    >>> C Chao-Hsing, see CH Chen.
  905. Aicha Chaoui Serier
    Systeme prepolymere epoxyde/gamma aminopropyltriethoxysilane: reactions, proprietes et applications aux materiaux composites [Curing of epoxy prepolymers with gamma aminopropyltriethoxysilane: reactions, properties and application to composite materials]
    Doctorate, INSA Lyon, 1989. DA-C092164. DAIC 50(4)736.
  906. CR Chaplin
    Some aspects of fracture in brittle composites
    PhD, Cambridge, 1969-70.
  907. BL Chapman
    Local and bending stresses in layered materials with bonded interface
    Masters, Pennsylvania SU, 1965.
  908. TJ Chapman
    The effect of cooling rate on residual stresses and mode I fracture toughness of thermoplastic composite materials
    MSc, Delaware, August 1988.
  909. AR Chapman
    Manufacturing method, microstructure and mechanical property relationships for a metal matrix composite
    PhD, Bath, 1991. DX95797. DAIB 53(1)497.
  910. A Charewicz
    Study of damage accumulation in graphite/epoxy composites
    Masters, IIT Chicago, 1984.
  911. JA Charles
    The use of thermography in fatigue studies
    PhD, Oklahoma, 1976.
  912. AK Chatterjee
    Velocity and attenuation of elastic waves in two-phase composites
    PhD, UCLA, 1976. DA7612197.
  913. SK Chaturvedi
    Some experimental stress analysis techniques for fibrous composites
    PhD, IIT-Kanpur, September 1978.
  914. EG Chatzi
    Surface characterisation of Kevlar fibres by FTIR spectroscopy
    PhD, CWRU, 1987. DA8710105.
    >>> RA Chaudhari, see RA Chaudhuri.
  915. VP Chaudhary
    Finite element analysis of axisymmetrical shells of composite material
    PhD, Nebraska-Lincoln, 1970. DA7017712.
  916. ZA Chaudhry
    Solutions to eigenvalue problems of antisymmetric cross ply and antisymmetric angle-ply laminated plates using affine transformations
    Masters, AFIT, December 1984. AFIT/GAE/AA/84D-5. AD A153 040. N85-27980.
  917. RA Chaudhuri
    Structural behaviour of FRP rectangular plates and cylindrical shells
    MS, IIT Madras, 1974.
  918. RA Chaudhuri
    Static analysis of fibre reinforced laminated plates and shells with shear deformation using quadratic triangular elements.
    PhD, S.California, 1983.
  919. Karabi Chaudhuri
    A study of metal matrix composites based on a titanium alloy
    PhD, University of Wisconsin - Madison, 1994.  AAD9419127  DAIB55(5)1984.
    >>> FA Chedid El-Helou, see FAC El-Helou
  920. JW Cheek
    Viscoelastic response of an internally pressurised filament wound cylinder
    Masters, Alabama @ Huntsville, 1986.
  921. George Augustine Chemparathy
    A study of structure formation in amine cured epoxy resins
    PhD, Michigan Technological University, 1995.  AADAAI9526470  DAB56(4)2049
  922. Chao-Hsing Chen
    Mechanical properties of fibre reinforced composite
    PhD, Wisconsin, 1965. DA6514859.
  923. C-C Chen
    Asymptotic solutions for wave propagation in elastic and viscoelastic bilaminates
    Masters, Toledo, 1974.
  924. T-C Chen
    An analytical study of torsion of an imperfectly bonded finite composite shaft
    Masters, Miami, 1974.
  925. W-C Chen
    Large deflection of rectangular sandwich plates with orthotropic cores
    Masters, Marquette, 1974.
  926. CJ Chen
    An investigation of interlaminar matrix stress in the vicinity of a void in a fibrous composite model
    Masters, Georgia IT, 1977.
  927. H-S Chen
    The effective properties of composite materials and suspensions
    PhD, Stanford, 1977. DA7718201.
  928. C Chen
    GPC calibration and preliminary kinetic evaluation of a linear epoxy resin
    Masters, Nebraska, 1979.
  929. CM Chen
    Design, fabrication and testing of filamentary composite shafts
    Masters, MIT, 1979.
  930. P Chen
    Response of laminated plates subjected to low velocity impact
    Masters, CSULB, 1980.
  931. C Chen
    Vibrations of rectangular composite plates with simply supported conditions along two opposite edges
    Masters, RPI, 1982.
  932. S Chen
    Local buckling of anisotropic cylindrical thin wall shells.
    Masters, RPI, 1982.
  933. SP Chen
    The local buckling of anisotropic cylindrical thin-walled tubes under a compressive load
    MSc, RPI, August 1982.
  934. YN Chen
    A failure criterion for unidirectional composite materials.
    Masters, Texas @ Arlington, 1982.
  935. C-P Chen
    Ultrasonic velocity & attenuation measurement in composite material
    Masters, Cornell, January 1983.
  936. WJ Chen
    Computerised spectroscopic characterisation of multiphase materials by means of the through transmission ultrasonic technique
    PhD, SUNY @ Stony Brook, 1983. DA8308703.
  937. C-Y Chen
    Prediction of monotonic tensile stress-strain curves of short fibre reinforced polymer composites
    PhD, UIUC, 1984. DA8502100.
  938. J-K Chen
    Nonlinear analysis of composite laminates
    PhD, Purdue, 1984. DA8423340. N85-18087.
  939. K-J Chen
    Mechanical properties of high performance carbon fibres.
    PhD, RPI, August 1984. DA8500942. N85-26922.
  940. YZ Chen
    Delamination behaviour in graphite/epoxy composite laminates
    Masters, Delaware, 1985.
  941. AT Chen
    Formulation for symmetrically laminated beam and plate finite elements with shear deformation
    PhD, Purdue, 1986. DA8709785.
  942. DH-P Chen
    The viscoelastic behaviour of isotactic polystyrene and the variation of the glass transition temperature in curing epoxy.
    PhD, S.California, 1986.
  943. G-S Chen
    Aeroelastic behaviour of forward swept graphite/epoxy wing aircraft with rigid body freedoms
    ScD, MIT, 1986.
  944. MH Chen
    The in-situ ply shear strength distribution in graphite/epoxy laminated composites
    Masters, Arizona SU, 1986.
  945. VL Chen
    On the constitutive relations for anisotropic solids.
    PhD, Princeton, 1986. DA8610716.
  946. YF Chen
    Prediction and measurement of mechanical and rheological properties of semicrystalline polymers
    DSc, Washington University-MO, 1986.
  947. R-SP Chen
    Hygrothermal response of graphite/epoxy composites.
    PhD, Ohio SU, 1987. DA8717612.
  948. W-LA Chen
    Characterisation of thermoplastic polyamide matrix composite material
    PhD, UIUC, 1987. DA8802997.
  949. Z Chen
    New method to ultrasonically measure elastic moduli in composites
    Masters, Oklahoma, 1987.
  950. G Chen
    Nonlinear finite element analysis of plates and shells of composite laminates
    Masters, Purdue, 1988.
  951. Gwo-Huang Chen
    Effect of environmental conditions on the mechanical behaviour of wood composite I-beams
    PhD, Auburn, 1988. DA8925606. DAIB 50(8)3248.
  952. HS Chen
    Quantitative non-destructive evaluation of composite structures through image correlation acquired strain fields
    Masters, South Carolina, 1988.
  953. Kuan-Luen Chen
    Evaluation of weight functions, stress-intensity factors and energy release rates for two-dimensional anisotropic structures by the alternating finite element method, the virtual crack extension technique and the equivalent domain integral method
    PhD, Georgia IT, 1988. DA8919736. DAIB 50(5)2113.
  954. X Chen
    The cure of an epoxy resin
    PhD, Sheffield, 1988. ASLIB 39(2)5177.
  955. Fangping Chen
    Study into blister formation in GRP laminates in water
    PhD, Loughborough, June 1989.
  956. Ming Chen
    Electromagnetic radiation calorimetry of thermoplastics, elastomers and composites systems
    PhD, VPI&SU, 1989. DA9001185. DAIB 50(8)3501.
  957. Jirui Chen
    Hygrothermal effect on the mechanical properties of Polyphenylene sulphide (PPS) composites
    MEng, Concordia, 1990. MA-M59170. MA 30(2)365.
  958. Tungyang Chen
    Selected problems in micromechanics of fibrous composites
    PhD, RPI, 1990. DA9111050. DAIB 51(11)5415.
  959. William Weiching Chen
    Analytical and experimental study of the instability of orthotropic inhomogeneous columns
    PhD, Wisconsin: Madison, 1990. DA9106669. DAIB 51(12)6011.
  960. Li Che Ted Chen
    A unique method of determining the elastic and engineering constants of unidirectional fibre-reinforced composite plates using ultrasound
    MASc, University of Toronto, 1990.  AADMM65556 MA30(4)1246
  961. Zhou Min Chen
    A theory of anisotropic liquids: application to lamellar graphite intercalation compound
    PhD, Houston, 1990. DA9103580. DAIB 51(9)4411.
  962. Ansong Chen
    The effect of fatigue-induced damage on the mechanical properties of CFRP composites
    PhD, Bath, 1991. DX94301. DAIB 52(9)4919.
  963. Chun-Fu Chen
    Contact of orthotropic laminates with a rigid spherical indentor
    PhD, VPI&SU, 1991. DA9126868. DAIB 52(4)2129.
  964. Huei-Horng Chen
    Structure/property relationships of thermoplastic modified epoxies
    PhD, Lowell, 1991. DA9134200. DAIB 52(6)3092.
  965. Min Chen
    Accelerated viscoelastic characterisation of E-glass/epoxy composite
    PhD, NWU, 1991. DA9128965. DAIB 52(5)2739.
  966. Yong-Ching Chen
    Elevated temperature deformation and forming of aluminium-matrix composites
    PhD, Ohio SU, 1991. DA9211102. DAIB 52(11)6048.
  967. Julie Chen
    The application of continuum mechanics to the stochastic modelling of fracture in fibre-fibre composites
    PhD, MIT, 1991. DA-571522. DAIB 53(2)1023.
  968. Fuh-Sheng Chen
    Damage and failure analysis of continuous fiber reinforced polymer composites
    PhD, Case Western Reserve University, 1992.  AAD9306102  DAIB53(10)5392
  969. Hsichieh Chen
    Characterizing longitudinal splitting and delamination fracture toughness of composites
    PhD, University of Utah, 1992.  AAD9233326  DAIB53(6)3092
  970. Li Che Ted Chen
    A unique method of determining the elastic and engineering constants of unidirectional fibre-reinforced composite plates using ultrasound
    MASc, University of Toronto, 1990.  AADMM65556 MA30(4)1246
  971. Cheng-Chih Chen
    Behaviour and design of axially loaded high-strength composite columns
    PhD, University of California - Berkeley, 1993.  AAD9430427  DAIB55(7)2894
  972. Ming-Huei Chen
    A three dimensional finite element scheme for fiber microbuckling in thick multidirectional laminated composites
    PhD, University of Maryland, 1993.  AAD9425008  DAIB55(4)1508
  973. Song-Jang Chen
    Smart carbon/epoxy composites:  filament winding with embedded sensor
    PhD, University of Nebraska - Lincoln, 1993.  AAD9322790  DAIB54(4)2090
  974. Wennei Yong Chen
    Characterisation of the tensile behavior of ceramic woven fabric composites
    PhD, University of Delaware, 1993.  AAD9334032  DAIB54(7)3808
  975. Yung-Tin Chen
    Resin transfer molding of polycyanate: chemorheology, molding experiments, and wetting visualization
    PhD, University of Minnesota, 1993.  AAD9317704  DAIB54(2)964
  976. Hung-Shyong Chen
    Environmental effects of bolted composite joints
    PhD, Rensselaer Polytechnic Institute, 1994.  AAD9434557  DAIB55(8)3534
  977. Jidong Chen
    Elastic and structural properties of composite materials
    PhD, Michigan State University, 1994.  AADAAI9512028  DAB55(12)5418
  978. Bijian Chen
    A physically based model of fabric drape
    PhD, Cornell University, 1995.  AADAAI9538802  DAB56(7)3998
  979. Pusheng Chen
    Architecture and mechanical properties of three-dimensional braided composites
    PhD, North Carolina State University at Raleigh, 1995.  AADAAI9526914  DAB56(4)2308
  980. Roger Ruixi Chen
    Finite element nonlinear random response of composite panels of arbitrary shape to acoustic and thermal loads applied simultaneously
    PhD, Old Dominion University, 1995.  ADDAAI9530657  DAB56(8)4536
  981. Wei-Hung Chen
    Determination of property distributions of nonuniform composites by the use of vibration measurements
    PhD, Wayne State University, 1995.  AADAAI95395631  DAB56(5)2818
  982. James H Cheney
    Structural polyurethane adhesives: an evaluation of the performance of commercial adhesives with metals and composites
    MSEng, Lowell, 1991. MA1343768. MA 29(4)712.
  983. DC Cheng
    Nonlinear vibration analysis of rectangular sandwich plate
    Masters, Tennessee TU, 1969.
  984. FS Cheng
    The effect of thermal treatment on the interfacial morphology and mechanical properties of graphite fibre/polycarbonate composites.
    DSc, Washington University-MO, 1970.
  985. DK Cheng
    Mechanical and fatigue behaviour of composite materials.
    Masters, CSULB, 1976.
  986. PC-H Cheng
    Elastic field of inclusion and crack in anisotropic media
    PhD, NWU, 1977. DA7732286.
  987. PS Cheng and AJ Gutierrez
    Analysis and testing of a frame structure made from carbon fibre sandwich members
    BS, Bristol, June 1978. BU222. N79-23149.
  988. WC Cheng
    Axial compression of a helically-wound laminated tube.
    Masters, Kentucky, 1979.
  989. HM Cheng
    Filament winding of thermoplastics
    Masters, Nebraska, 1985.
  990. Ming-Chih Cheng
    Statistical strength models for composites with discontinuities
    PhD, University of Washington-WA, 1991. DA9131622. DAIB 52(5)2659.
  991. Chao-Hsien Cheng
    Modeling of the thermal elasto-plastic behavior for composite materials using the homogenization method
    PhD, University of Michigan, 1992.  AAD9226865  DAIB53(5)2499
  992. Tseng-Hsiang Cheng
    Effect of thermal stresses on the vibration of composite cantilevered plates
    PhD, Polytechnic University, 1992. DA9216057. DAIB 53(1)508.
  993. Vun-Shing Chengn
    Reaction formed processes for alumina/aluminum and aluminum nitride/aluminum ceramic composites
    PhD, Pennsylvania State University, 1992.  AAD9226661  DAIB 53(5)2486
  994. Y-M Cheong
    A study of the measurement of residual stresses at the interfaces of aluminium/graphite composites and silicon film on quartz
    PhD, Texas @ Austin, 1987. DA8806305.
  995. William Mark Chepolis
    Experimental investigation of the fiber twist test (FTT) to measure composite interface properties
    D.Eng, University of Massachusetts at Lowell, 1994.  AAD9430328  DAIB55(7)2967
  996. IK Cherian
    Colloidal processing and mechanical properties of alumina-zirconia composite
    Masters, Clemson, 1988.
  997. RG Chermahini
    Determination of orthotropic elastic and photoelastic constants
    Masters, Old Dominion, 1982.
  998. Chyi Chern
    A study of the Yeh-Stratton failure criterion with stress concentrations of fiber-reinforced composite materials
    MS, California State University, Long Beach, 1996, AAD1380197, MA34(6)2411.
  999. EI Chernin
    Effect of the phase structure parameters of the filler and inter-phase interaction on the physical and mechanical properties of filled thermosetting plastics based on FA monomers
    Dissertation, Moscow, 1977.
  1000. SS Chesnokov
    Investigation of the vibrations and stability of plates by the finite element method
    Dissertation, Moscow, 1972.
  1001. AT Cheung
    Transverse strength improvement of composites
    PhD, Virginia, 1984. DA8515504. N86-23654.
  1002. WL Cheung
    <interfacial morphology in glass fibre reinforced polypropylene>
    PhD, Hong Kong, 1990.
  1003. Y Chevalier
    Assessment calculations for composite materials with unidirectional fibres
    3eme Doctorate, Paris VI, 1971.
  1004. RS Chhatwal
    Stresses in the cross section of composites reinforced by unidirectional fibres
    PhD, Surrey, 1972. D2554/72.
  1005. KL Chhibber
    A theory of displacements and stresses in layered systems
    Masters, N.Dakota SU, 1969.
  1006. C-H Chiang
    Mechanical and thermal expansion behaviour of angle-ply and filament-wound composites
    PhD, NCSU Raleigh, 1977. DA7811562.
  1007. C-HP Chiang
    Fourier transform infrared spectroscopic investigation of the fibre-matrix interface in fibreglass reinforced epoxy composites
    PhD, CWRU, January 1981. N81-28174. DA8109576.
  1008. C-R Chiang
    Micromechanical determination of polycrystal plasticity and some considerations on composite elasticity
    PhD, Rutgers, October 1983. DA8406353.
  1009. YJ Chiang
    Design of mechanical joints in composites
    PhD, Wisconsin: Madison, 1983. DA8400480. N84-27038.
  1010. TL Chiang
    Inverse design of composite multiholed internally cooled turbine blades
    Masters, Texas @ Austin, 1985.
  1011. Yih-Cherng Chiang
    Analysis and modelling of strength and toughness of ceramic matrix composites
    PhD, Delaware, 1991. DA9223641. DAIB 53(4)2020.
  1012. Colin Dean Chickles
    Effects of Y rotational terms in delamination of composites by shear deformation theory
    MS, California State University Long Beach, 1993.  AAD1354595  MS32(2)655
  1013. RJ Chicoine
    Temperature dependence of stress concentration factors in composite materials
    MS, NPS Monterey, June 1977. AD A042 294. N77-32250.
  1014. CY Chiem
    Etude comparitive entre les comportements statique et dynamique des materiaux, effet du saut de vitesse de deformation
    [Comparitive study between static and dynamic loading of materials, effect of jump in deformation speed]
    DEtat, Nantes, June 1980.
  1015. MC Chien
    Strain induced crystallisation of polyetheretherketone (PEEK)
    Masters, Connecticut, 1987.
  1016. Pei-Yuan Chien
    Effects of injection moulding parameters on the mechanical properties of short glass fibre reinforced poly(phenylene sulphide)
    MS, Texas @ Arlington, 1991. MA1347215. MA 30(3)809.
  1017. TC Chieu
    Structural and electronic properties of pristine and intercalated highly ordered graphite fibres
    PhD, MIT, 1984.
  1018. Joanna Denise Childress
    Wood fibre/high density polyethylene composites: ability of additives to enhance mechanical properties
    MS, Michigan SU, 1991. MA1346256. MA 30(2)314.
  1019. ES-M Chim
    Tensile fatigue damage and degradation of random short fibre SMC composite
    PhD, UIUC, 1985. DA8511596. N86-11259.
  1020. W-K Chin
    Environmental effects on mechanical properties of Kevlar 49 fibre and composite
    DSc, Washington University-MO, 1983. DA8314005.
  1021. ESC Chin
    An investigation of the interfacial phenomena in FP(Al2O3) fibre reinforced magnesium composites
    MS, Brown, 1983.
  1022. H Chin
    Effect of bending-extension coupling on the deformation of axisymmetric laminates
    PhD, Purdue, 1987. DA8807595.
  1023. Joannie W Chin
    Surface characterization and adhesive bonding of carbon fiber-reinforced composites
    PhD, Virginia Polytechnic Institute and State University, 1994.  AAD9502718  DAIB55(9)3909. VT.
    >>> S Chin-Teh, see CT Sun.
  1024. Long-Sheng Chiou
    Impact strength of composite materials
    Masters, NTHU Taiwan, 1984.
  1025. Jeng-Maw Chiou
    Improving the temperature resistance of aluminium-matrix composites by using an acid phosphate binder
    PhD, SUNY Buffalo, 1991. DA9210595. DAIB 52(11)6023.
  1026. Pin-Lin Chiou
    Modelling the reaction kinetics and chemoviscosity of an epoxy resin system exhibiting complex curing behaviour
    PhD, TA&MU, 1991. DA9206472. DAIB 52(9)4752.
  1027. Zen-Wen Chiou
    Catalyst-assisted growth of multidirectional carbon whiskers for composite application
    PhD, Auburn University, 1994.  AAD9430109  DAI55(7)2993.
    >>> C Chi-sing, see CS Chang.
  1028. MR Chitsaz-Zadeh
    The effect of rubber modification on friction and wear of epoxy networks
    PhD, VPI&SU, 1987. DA8725110.
  1029. Hsing-Pang Chiu
    The effect of fiber coating on the mechanical behavior of silicon carbide fiber-reinforced titanium aluminide matrix composites
    PhD, University of California - Los Angeles, 1994.  AAD9502023  DAIB55(8)3522
  1030. KN Cho
    Uniaxial compressive and shear buckling in orthotropic sandwich plates by improved theory
    Masters, Oklahoma, 1985.
  1031. K Cho
    Internal fracture of model composites
    PhD, Akron, 1986. DA8616724.
  1032. Kyu Nam Cho
    Higher-order individual-layer theory of laminated composites
    PhD, Oklahoma, 1989. DA9007022. DAIB 50(10)4718.
  1033. Jeongmi Cho
    Rubber toughening of a bismaleimide composite matrix resin
    PhD, Dayton, 1990. DA9116088. DAIB 52(1)456.
  1034. Chongdu Cho
    Mechanical behaviour of fibre-reinforced ceramic matrix composites
    PhD, Michigan, 1991. DA9208515. DAIB 52(11)6036.
  1035. Bong Gyoo Cho
    Fiber-reinforced nylon-6 composites by the reaction injection pultrusion process
    DEng, University of Lowell, 1992.  AAD9305327  DAIB53(10)5429
  1036. Maenghyo Cho
    An efficient higher order theory for laminated composite plates and a finite element implementation
    PhD, University of Washington, 1993.  AAD9326349  DAIB54(5)2608
  1037. Yong-Bae Cho
    A micromechanics-based independent mode failure criterion for fiber-reinforced composites
    MS, Michigan State University, 1994.  AADAAI1361292  MA33(5)1531
  1038. Young Cho
    Higher-order, partial hybrid stress, finite element formulation for laminated plate and shell analyses by using preconditioned iterative procedures
    PhD, Rutgers University the State U. of New Jersey, 1995.  AADAAI9524173 DAB56(3)1523
  1039. GH Choe
    Impact testing of composite materials at high strain rates
    Masters, Delaware, 1988.
  1040. Gum Ho Choe
    Impact response of laminated plates subjected to transverse loading
    PhD, Wichita State University, 1992.  AAD9306134  DAIB53(11)5932
  1041. Harpal Singh Chohan
    Free-edge stress fields in composite laminated coupons
    PhD, Ohio State University, 1994.  AAD9427683  DAIB55(6)2305
  1042. Dai Shik Choi
    Transient wave propogation in elastic composite materials
    PhD, Texas @ Austin, 1971. DA7215729.
  1043. KK Choi
    Mica reinforced thermoplastic polyester
    Masters, Toronto, 1975.
  1044. I Choi
    End effects in plane anisotropic elasticity
    MS, Houston, 1977.
  1045. Seung-Bok Choi
    Control of single-link flexible manipulators fabricated from advanced composite laminates and smart materials incorporating electro-rheological fluids
    PhD, Michigan SU, 1990. DA9102656. DAIB 51(9)4555.
  1046. Youn Dae Choi
    Mechanical properties of a composite beam containing an electrorheological fluid
    PhD, NCSU Raleigh, 1991. DA9208909. DAIB 52(10)5472.
  1047. Hyung Jip Choi
    On iso- and nonisothermal crack problems of a layered anisotropic elastic medium
    PhD, VPI&SU, 1991. DA9136279. DAIB 52(7)3698.
  1048. Hyung Yun Choi
    Damage in graphite/epoxy laminated composites due to low-velocity impact damage
    PhD, Stanford, 1991. DA9115751. DAIB 52(1)362.
  1049. Heung Soap Choi
    Effects of interphases on the mechanical, thermal and hygromechanical response of fiber reinforced composites
    PhD, Northwestern University, 1993.  AAD9327174  DAIB54(5)2703
  1050. Yong-Kyu Choi
    The three dimensional stress field in a laminated composite plate with a hole based on a finite element method
    PhD, University of Utah, 1993.  AAD9333353  DAIB54(7)3808
  1051. Jinkyu Choi
    Hygrothermal effects on the epoxy resins influenced by the network topology
    MS, Michigan State University, 1996, AAD1381843, MA35(1)323.
  1052. NG Choksi
    Crack growth in unidirectional composites using singular finite elements and interactive graphics
    PhD, VPI&SU, 1988. DA8814576.
  1053. Rustum Choksi
    Two topics on the equations of solid mechanics:  the incompressible limit in nonlinear elasticity and conservation laws in fibre-reinforced materials
    PhD, Brown University, 1994.  AAD9433339  DAIB55(8)3343
  1054. VKS Choo
    Multiaxial testing of fibre-reinforced composite materials
    PhD, Liverpool, June 1982. D46557/83.
  1055. Virat Chomkwah
    Finite element analysis of laminated composite plates
    PhD, Missouri-Rolla, 1989. DA8920394. DAIB 50(6)2583.
  1056. RG Chopra
    Stress relaxation behaviour of an anisotropic linear viscoelastic material
    Masters, Bucknell, 1972.
  1057. DK-K Chou
    A theoretical study of yielding and inelastic behaviour of laminated media
    PhD, Drexel, 1975. DA7506121.
  1058. ZX Chou
    <strength of filament wound composites>.
    MasterEng.Mech, Xian Jiaotong Univ-China, July 1984.
  1059. CT Chou
    The effect of matrix shrinkage on damage accumulation in composites
    Masters, PI Brooklyn, 1988.
  1060. Choyin Joseph Chou
    Effects of delamination and ply fiber waviness on effective axial and bending stiffness in composite laminates
    MS, University of Texas at Arlington, 1992.  AAD1348839  MA31(1)338
  1061. Benabdallah Chouchaoui
    Application du theoreme variationnel de Hellinger-Reissner a la methode des elements finis pour l'evaluation de contraintes a l'interface de materiaux composites
    MScA, Ecole Polytechnique Montreal - Canada, 1990.  MA30(4)1456
  1062. JT Chow
    Mechanical fabrication of multifilament E composites.
    Masters, Texas @ Austin, 1974.
  1063. M Chow
    Design tables for peak bending stresses of curved composite beams
    Masters, CSULB, 1983.
  1064. Gan-Moog Chow
    Nanometre-size fibre composite synthesis by laser-induced reactions
    PhD, Connecticut, 1988.  DA8913799.  DAIB 50(4)1597.
  1065. Thomas M Chow
    Concurrent ultrasonic tomography and acoustic emission in solid materials
    PhD, Queen's University at Kingston (Canada), 1992.  AADNN80733 DAIB54(7)3666.
    >>> KD Chowdhury, see K Das Chowdhury.
  1066. I-C Choy
    The physical properties of bisphenol-A based epoxy resins during and after curing
    PhD, Pittsburgh, 1987. DA8719343.
  1067. LE Chrisinger
    Calculation of airloads for a flexible wing via Nastran
    MS, AFIT @ WPAFB, December 1980. AFIT/GAE/AA/80D-2. N81-19031. AD A094 770.
  1068. AJ Christian
    The analysis of sandwich panels
    PhD, Bradford, 1975.
  1069. RL Christianson
    Experimental determination of physical constants for a sandwich plate
    Masters, N.Dakota SU, 1968.
  1070. F Christin
    Les composites carbone-carbone-carbure de silicium: une nouvelle famille de materiaux destines a des applications a hautetemperature [Carbon-carbon-silicon carbide composites: a new family of materials for application at high temperature]
    DEtatSci, Bordeaux-I, 13 December 1979. Thesis #641.
  1071. AP Christoforou
    An investigation of composite material response under tension-tension biaxial stress
    Masters, Utah, 1984.
  1072. AP Christoforou
    Investigation of impact in advanced composites
    PhD, Utah, 1988. DA8816629.
  1073. Anuwat Chrodprasert
    The shear deformation of fiber reinforced plastic flexural structures
    DEng, Lamar University - Beaumont, 1992.  AAD9227995  DAIB53(6)3042
  1074. S Chryssafitis
    Stress distribution around bolt holes in fibre reinforced plastics
    MSc, London: ICST&M, September 1981.
  1075. TY Chu
    Plastic behaviour of composites and porous media under isotropic stress
    PhD, Pennsylvania, 1967. DA6804569.
  1076. WW Chu
    Numerical solutions of fibre matrix bond stresses in composites
    PhD, Cornell, 1969. DA7008662.
  1077. YS Chu
    Maximum load prediction for sandwich plates
    Masters, Stanford, 1969.
  1078. KH Chu
    The effects of silane coupling agents on cord adhesion.
    Masters, Akron, 1977.
  1079. HS Chu
    Processing-structure-property relations for high performance amine cured epoxy polymers
    Masters, University of Washington-WA, 1980.
  1080. SK Chu
    A study of composite lug design using unidirectional Kevlar 49/epoxy material wrapped around a pin
    Masters, CSULB, 1983.
  1081. Jui-Lin Chu
    Analytical study of cracks in unidirectional composite material by hybrid finite element method
    PhD, SDSMT, 1987. DA0379177.
  1082. GD Chu
    Reducing free edge effect on laminate strength by edge modification
    Masters, Purdue, 1988.
  1083. Jia-Ni Chu
    Microstructure and fracture of PEEK composites
    Masters, Delaware, 1988.
  1084. Cha-Yang Chu
    Processing and microstructures/mechanical properties correlations in silicon-nitride-whisker-reinforced silicon nitride matrix composites
    PhD, Illinois IT, 1991. DA9136138. DAIB 52(7)3835.
  1085. Fa-De Jack Chu
    The damage, repair and design of fiber composite structural materials
    PhD, University of Michigan, 1992.  AAD9303716  DAIB53(10)5393
  1086. Gou-Don Chu
    Free edge and size effects on failure initiation and ultimate strength of laminates containing a center hole
    PhD, Purdue University, 1992.  AAD9313967  DAIB54(1)345
  1087. Han-Ru Chu
    Vibrations of disordered assemblies of three-dimensional composite blade substructures
    PhD, Ohio State University, 1992.  AAD9307738  DAIB53(11)5866
  1088. Jia-Ni Chu
    Viscoelastic properties of three-dimensional braided PEEK/graphite composites
    PhD, Drexel University, 1992. AAD9305293  DAIB 53(10)5393
  1089. Ya-Cherng Chu
    Ultrasonic characterization of fiber-matrix interphasial properties and damage in high temperature composites
    PhD, Ohio State University, 1994.  AAD9420938  DAIB55(3)991
  1090. PS Chua
    Interface measurement using single production fibre pullout tests
    MASc, Toronto, 1982.
  1091. PS Chua
    Hydrothermal effects on the glass fibre/polyester interphase
    PhD, Toronto, 1985.
  1092. SA Chun
    Reactive liquid polymer modification of epoxy & polyester resins
    Masters, Akron, 1981.
  1093. I Chun
    Coupling ability of a maleated polypropylene in mica-polypropylene composites
    MASc, Toronto, 1982.
  1094. Chong Keun Chun
    On a first-order shear deformation theory for laminated anisotropic shells and plates
    PhD, UCLA, 1991. DA9135173. DAIB 52(6)3138.
  1095. Heoung Jae Chun
    Thermomechanical behavior of unidirectional metal matrix composite
    PhD, Northwestern University, 1994.  AADAAI9521680 DAB56(3)1662
  1096. SW Chung
    Formulation and solution of non-homogeneous anisotropic circular cylinder shell theories
    PhD, Illinois, 1973. DA7326563.
  1097. C-K Chung
    Stresses in a thin orthotropic circular plate subjected to a uniformly distributed lateral load
    Masters, Louisiana SU, 1973.
  1098. TS Chung
    The injection moulding of phenolic resin
    PhD, SUNY Buffalo, 1980.
  1099. B Chung
    Rod-like particles in non-Newtonian fluids. I: Rheology and injection moulding of glass-fibre filled thermoplastics. II: Orientation and rheology of rod-like particles in a second-order fluid
    PhD, Cornell, 1985. DA8516913.
  1100. W-C Chung
    Fracture behaviour of multidimensional fibre-reinforced composites
    PhD, Auburn, 1987. DA8804984.
  1101. Ilsup Chung
    Inelastic behavior of thermoplastic composites
    PhD, Purdue University, 1992.  AAD9301279  DAIB53(9)4765
  1102. Chang-Bum Chung
    Compressive behavior of thick composite shells:  benchmark solutions for loss of stability and hygroscopic effects
    PhD, Georgia Institute of Technology, 1993.  AAD9415630  DAIB54(12)6318
  1103. GB Churchill
    Improvement to the flexural strength of asbestos reinforced phenolic
    Masters, MIT, 1974.
  1104. David L Churchill
    Fiber-fiber interactions in the elastic properties of short-fiber composites
    PhD, University of Pennsylvania, 1994.  AAD9427514  DAIB55(5)1971
  1105. Hui-Huang Abel Chyou
    Variational formulation and finite element implementation of Pagano's theory of laminated plates
    PhD, Ohio SU, 1989. DA9011149. DAIB 50(12)5723.
  1106. A Cinar
    The crack and crack contact problems for an orthotropic strip
    Masters, Lehigh, 1980.
  1107. J Cinquin
    Composites matrices thermoplastiques-fibres de verres [Glassfibre thermoplastic composites]
    Doctorat, Lyon, 1988.
  1108. M Cirino
    The friction and wear behaviour of unidirectional continuous fibre reinforced polymer composites
    MMAE, Delaware, 1985.
  1109. Mark Cirino
    Axisymmetric and cylindrically orthotropic analysis of filament winding
    PhD, Delaware, 1989. DA9010403. DAIB 50(11)5183.
  1110. Peter Robert Ciriscioli
    An expert system for autoclave curing of composites
    PhD, Stanford, 1990. DA9102242. DAIB 51(8)4014.
  1111. A Claeys
    Hoogfrekwente ultrasone C-scan: dataverwerking van ultrasone geluidssignalen van komposieten
    [High frequency ultrasonic C-scan: dataprocessing for composites]
    Eng, KUL Leuven, 1990.
  1112. HJ Clare
    Mechanics of failure in glass-fibre resin composites.
    MEng, Liverpool, 1976.
  1113. IE Clark
    Fibre fatigue in various environments
    PhD, UMIST, October 1980. D47273/83.
  1114. PJ Clark
    The vibration of a stiffened panel-analysis by means of an orthotropic plate conforming finite element
    MSc, Newcastle-u-Tyne, September 1982.
  1115. DL Clark
    Moisture absorption in hybrid composites
    MS, TA&MU, December 1983.
  1116. AJ Clarke
    The oxidation of acrylic fibres for the formation of carbon fibres
    PhD, Surrey, 1976. D17163/76.
  1117. AS Clarke
    A study of differences of strength properties and geometric variations of commercially produced straight GRP piping from three manufacturers
    MSc, UMIST, January 1980. D74718/87.
  1118. DA Clarke
    Strength of model composites incorporating silicon carbide fibres
    PhD, Surrey, February 1988. DX81757. ASLIB39(1)1943. DAIB49(7)2800.
  1119. Alexander Perry Clarke
    High intensity X-ray instrumentation for residual strain measurements in composites and textured materials
    PhD, Queen's University at Kingston (Canada), 1993.  AADNN85169  DAIB55(1)6684
  1120. Gregory Vislav Clarke
    Analysis of thin-walled composite beams using degenerate finite elements
    PhD, Catholic University of America, 1994.  AAD9424293  DAIB55(4)1555
  1121. Steven John Claus
    Manufacture-structure-performance relationships for filament-wound composite shells
    PhD, Pennsylvania State University, 1994.  AAD9428079  DAIB55(6)2344
  1122. WA Clayton
    Analytical correlation of the state dependent thermal conductivity of phenolic-carbon and -graphite chars.
    MSc(ME), Seattle, 1969.
  1123. ML Clemens
    Viscoelastic properties of glass fibre reinforced nylon 66
    PhD, UMIST, 1979.
  1124. C Clerc
    Modelisation de poutres composites-application aux skis
    [Modelling of composite beams-application to snow skis]
    Doctorate, INSA/Lyon I, 1986.
  1125. G Cleverdon
    Studies related to the reinforcement of thermoplastics: a calorimetric study of the coupling agent-reinforcement interface.
    PhD, CNAA, 1978.
  1126. JJ Climenhaga
    Local buckling in composite beams
    PhD, Cambridge (& Queens Ontario), 1970-71.
  1127. JA Clinard
    Photoelasticity investigation of the behaviour of composites under stress-pulse loading conditions
    Masters, Tennessee, 1970.
  1128. RG Clinton
    Acoustic emission analysis of woven graphite-epoxy composite materials
    PhD, Georgia IT, September 1982. DA8229890. N83-28082.
  1129. MD Cloeter
    Mathematical modelling, Monte Carlo computer simulation, and laboratory measurement of a thermosetting anhydride-cured epoxy polymerization
    Masters, Nebraska, 1987.
  1130. WL Clow
    A study of field ionisation yeilds from a carbon filament.
    Masters, Missouri-Kansas City, 1970.
  1131. E Coates
    Thermal expansion of fibre reinforced polystyrene
    MSc, Manchester, 1969!.
  1132. E Coates
    Fracture properties of fibre reinforced polymers
    PhD, UMIST, 1971!.
  1133. B Cochelin
    Flambage et delaminage dans les plaques composites stratifiees
    Doctorate, Metz, February 1989.
  1134. J Cocker
    Activation and detoxication of carcinogenic industrial aromatic amines
    PhD, London: Royal Postgrad Medical School, 1988. ASLIB 37(4)7899.
  1135. PA Coetzer
    Development of a finite element based design tool for laminated composite structures
    MSc, Cranfield IT, September 1981.
  1136. BS Coffenberry
    An improved beam theory, including warping, for anisotropic materials- implementation and confirmatory testing.
    Masters, RPI, 1985.
  1137. Michael Patrick Coffey
    Alignment of silicon carbide whsikers and chopped carbon fibres in rayon yarns for use in ceramic and metal composites
    MS, Lowell, 1991. MA1343739. MA 29(4)684.
  1138. Douglas Ward Coffin
    Flange wrinkling and the deep-drawing of thermoplastic composite sheets
    PhD, University of Delaware, 1993.  AAD9419548  DAIB55(3)1138
  1139. Emmanuel Cofie
    Analysis of thin-walled isotropic and anisotropic composite structures by the direct stiffness method
    PhD, Catholic University of America, 1993.  AAD9320152  DAIB54(3)1546
  1140. SF Cogan
    Mechanical properties of niobium(3)-tin multifilament composites
    Sc.D, MIT, 1979.
  1141. JW Cogburn
    Process optimisation for C-shape melt-spun carbon fibres
    Masters, Clemson, 1986.
  1142. JD Cogdell
    Stresses in anisotropic rotating disc having nonlinear radial stress strain
    Masters, Arkansas, 1971.
  1143. RN Cohen
    Effect of resin toughness on fracture behavior of graphite/epoxy composites
    MS, TA&MU, December 1982.
  1144. D Cohen
    Calculation of skin-stiffener interface stresses in stiffened composite panels
    PhD, VPI&SU, 1987. DA8802722.
  1145. D Cohn
    Studies of the behaviour of polymers and composite materials under swelling conditions
    PhD, Hebrew Univ-Israel, 1981.
  1146. RW Coign
    Design, analysis and testing of a composite fuselage structure
    Masters, Mississippi State University, 1989
  1147. JH Cole
    The effect of interfacial energy on the crystallisation and melting behaviour of poly(ether)-silica composites
    PhD, McGill, 1978
  1148. E Cole
    The effect of water on the toughness of polyethersulphone.
    PhD, CNAA: Coventry (Lanchester), November 1984. D55273/85. ASLIB 36(2) 4520.
  1149. DR Cole
    Existence results for steady state wave propagation in inhomogeneous, anisotropic, dispersive media
    PhD, Mississippi, 1985. DA8524041.
  1150. Sarah L Coleman
    The corrosion of metal matrix composites
    PhD, University of Bath, 1991.  AADDX97176  DAIB53(7)3706.
    >>> SLL Colla, see SL La Colla.
  1151. J Collazo
    Study of delamination of composite laminates under axial compressive loads
    Masters, Florida, 1982.
  1152. TA Collings
    Influence of stacking sequence on CFRP single bonded joints
    BSc, London: ICST&M, 1980.
  1153. JF Collins
    The strength and failure behaviour of short glass fibre reinforced polyamide 6
    PhD, Surrey, June 1981. D38257/81.
  1154. LG Colter
    Filler and its effect on the adherence of a bisphenol-A type of epoxy resin coating
    Masters, Texas @ El Paso, 1974.
  1155. MJ Colucci
    Void formation in glass reinforced epoxy resin prepregs.
    Masters, Texas @ Austin, 1984.
  1156. GE Colvin
    Investigation into mechanical response of IM7/8551-7 carbon/epoxy
    Masters, Utah, 1987.
    >>> SJL Combe, see SJ La-Combe.
  1157. Cawas Homi Commissariat
    Free vibration analysis of general composite laminates by finite element method
    MS, California State University, Long Beach, 1994.  AAD1357546  MA33(1)217
  1158. VN Con
    Finite difference approach for predicting probabilistic life of a composite cylinder subjected to thermal random loads
    PhD, VPI&SU, 1979. DA7924097.
  1159. Frederic Conchin
    Study of thermomechanical behavior in relation to the microstructure of two-dimensional silicon carbide/carbon/silicon carbide fibre reinforced materials [Etude du comportement thermomecanique en relation avec la microstructure de materiaux a renfort fibreux SiC/C/SiC 2D]
    PhD, Institut National des Sciences Appliques de Lyon (France) , 1994. AADC370310. DAIC55(4)1308
  1160. JW Congdon
    Fabrication and mechanical properties of alumina fibre-alumina matrix composites
    PhD, Alfred, 1978. DA7813214.
  1161. CE Congelio
    A design analysis of multilayered cylinders of the ninth order
    Masters, Pittsburgh, 1989.
  1162. Susan Marie Connelly
    The effect of silane treatments on interphase properties of a glass fiber reinforced unsaturated polyester
    PhD, University of Connecticut, 1993.  AAD9333197  DAIB54(7)3643
  1163. JD Connors
    Compressive fatigue of glass and graphite reinforced composites
    Masters, MIT, 1978.
  1164. RC Connor
    The stress corrosion of coated E-glass fibres.
    PhD, Wales: Cardiff, 1982.
  1165. PC Conor
    Some physical properties of carbon fibre and carbon fibre reinforced polymer, their connection with mechanical properties and application to testing
    MSc, Cranfield IT, 1969.
  1166. N Conrad
    Microcracking in fibrous composites
    Masters, TA&MU, 1973.
  1167. N Conrad
    On microcrack growth and arrest in simulated fibrous composites
    PhD, TA&MU, 1976. DA7702609. MM-3168-76-10.
  1168. EG Conrad
  1169. 3-D reinforcement of thin composite laminates: improved low velocity impact damage tolerance
    Masters, Texas @ Arlington, 1983
  1170. TJ Conrads
    Experimental study of wave propagation in composite bars
    Masters, St.Louis, 1969.
  1171. Paul James Conroy
    Durability of glass and ceramic fibres within the lung
    PhD, CNAA: Sheffield City Poly, 1990. DX92303. DAIB 52(1)109.
  1172. Suzanne Marie Conroy
    Biomimetic synthesis of quantum dot composites
    MS, University of Massachusetts, 1994.  AADAAI1360272  MA33(4)1282
  1173. Ted Allen Conway
    Viscoelastic response of wound polymer cord with multiple filament cross-sections
    PhD, Illinois @ Urbana-Champaign, 1991. DA9136576. DAIB 52(7)3699.
  1174. WD Cooke
    The attrition mechanisms of knitted fabrics
    PhD, UMIST, October 1982. D77618.
  1175. Lindsay Scott Coons
    Development of initiator systems for ultraviolet photopolymerisation of thick polymers and composites
    PhD, Michigan State University, 1996, AAD9706468, DAIB57(9)5777.
  1176. AAG Cooper
    Trajectorial reinforcement of fibre reinforced composite membranes
    DSc, Washington University-MO, 1972. DA7311811.
  1177. BA Cooper
    The determination of impact fracture toughness of filled polypropylene
    BE, Sydney-Australia, November 1983.
  1178. NR Cooper
    Probabilistic failure prediction of rocket motor components
    PhD, CNAA: RMCS Shrivenham, April 1988. DX83446.
  1179. R Cope
    Design of the spar-wingskin joint
    Masters, Delaware, 1979.
  1180. PD Copp
    Smooth contact of a rigid indenter and a beam of two orthotropic layers
    PhD, AFIT/NWU, June 1986. DA8621773. AFIT/CI/NR-86-97D. AD A170 678. N87-13801.
  1181. PEL Corberand
    Micromechanisms of fatigue delamination in continuous fibre polymeric composites
    MSc, Cranfield IT, 1990.
  1182. PL Corbin
    Stresses in composite axisymmetric shells by the finite difference method
    PhD, UIUC, 1968. DA6901320.
  1183. JP Cordebois
    Criteres a l'instabilite plastique et endommagement ductile en grandes deformations
    [Criteria for plastic instability and ductile damage at large deformations]
    Doctorat, Paris: P&M Curie, 1983.
  1184. SE Corder
    Indentation hardness of douglas fir and western hemlock lumber related to density
    Masters, Oregon SU, 1967.
  1185. PR Corder
    Compliance analysis for symmetrically loaded orthotropic and rib-reinforced circular cylindrical shells
    PhD, TA&MU, 1968. DA6811449.
  1186. CR Corleto Mena
    Mode II delamination fracture toughness of unidirectional graphite/epoxy composites
    Masters, TA&MU, 1986.
  1187. Carlos Roberto Corleto Mena
    Mode II delamination fracture characterization of fibre-reinforced composite materials
    PhD, TA&MU, 1990. DA9027204. DAIB 51(5)2557.
  1188. Michelle Mae Corning
    Thermal-induced stresses in fibre-reinforced composites
    MSME, Texas @ Arlington, 1989. MA1337545. MA 28(2)305.
  1189. C Correa
    Transverse compressive strength in continuously reinforced aluminum matrix composites
    Masters, MIT, 1987.
  1190. SP Corscadden
    Die entry flow of fibre reinforced thermoplastics
    PhD, Liverpool, February 1989. DX92487. ASLIB 38(4)8501.
    >>> ERD Costa Marques, see ERDC Marques.
  1191. John Edward Coster
    Dynamic response of composite plate and shell structures
    MEng, Pretoria, 1991. MA-664598. MA 30(2)365.
  1192. Kimberly Sue  Costin
    Optimum ply layup for delamination resistance in laminates with a hole
    MSMa, Texas @ Arlington, 1990. MA1341121. MA 29(1)118.
  1193. T Cotgreave
    The fibre reinforcement of rigid polyurethane foam
    PhD, Liverpool, 1977.
  1194. DJ Cotterill
    Composite C-fibre/hydrogel electrodes for electrophysical applications
    PhD, Aston, 1974.
  1195. BA Coulter
    Transverse shear deformation effects in composite laminated plates
    MS, TA&MU, December 1981.
  1196. John Paul Coulter
    Resin impregnation during the manufacturing of composite materials
    PhD, Delaware, 1988. DA8824193. DAIB 49(8)3392.
  1197. Michael Ernest Courbat
    Effect of agricultural fiber reinforcement on the mechanical properties of a recycled polyethylene plastic composite material.
    D.I.T.  University of Northern Iowa, 1995.  AADAAI953641  DAB56(7)3782
  1198. RW Courteau
    Propagation and attenuation of elastic waves in wood.
    Masters, Washington SU, 1967.
  1199. Louis Albert Coury
    Poly(n-vinylpyrrolidone)-modified spectroscopic graphite and carbon fibre ultramicroelectrodes
    PhD, Cincinnati, 1988. DA8903615. DAIB 49(11)4779.
  1200. R Courtemanche
    La simulation d'un convoyeur oscillant a fibres portant elastiques
    [Oscillating conveyor simulation by elastic loading fibres]
    Masters, Sherbrooke, 1978.
  1201. Steven J Covey
    A study of fiber volume fraction effects in notched unidirectinal SCS-6/titanium-15 vanadium-3 chromium-3 aluminum-3 tin composite
    PhD, University of Cincinnati, 1993.  AAD9329951  DAIB54(6)3283
  1202. Jerry Rodney Covick
    Thermal stresses in end-heated layered media
    PhD, Air Force Institute of Technology, 1995, AADAAI9610916. DAIB56(12)6880.
  1203. PB Cox
    The engineering properties of wood fibre fills
    Masters, Idaho, 1986.
  1204. Donald Lynn Cox
    An analysis of an incompressible fibre-reinforced material subjected to finite strains in the direction of the reinforcement
    PhD, Connecticut, 1988. DA8822916. DAIB 49(8)3287.
  1205. Steven James Cox
    Extremal eigenvalue problems for composite membranes
    PhD, RPI, 1988. DA8917468. DAIB 50(5)1975.
  1206. E Coyle
    Analysis of adhesively bonded torque shaft joints
    Masters, Delaware, 1981.
  1207. ME Coyne
    A variational approach to anisotropic elements.
    Masters, MIT, 1984.
  1208. JN Craddock
    Nonlinear response of laminated composite material cylindrical shells
    Masters, UIUC, 1977.
  1209. WJ Craft
    Stress singularities in an elastic matrix containing a broken or short elastic fibre
    PhD, Clemson, 1970. DA7117395.
  1210. WH Craig
    Fracture characteristics of molybdenum-aluminium and tungsten-aluminium fibre composites
    Masters, Texas @ Austin, 1972.
  1211. WH Craig
    Deformation and fracture of bundle-&-draw fibre composites
    PhD, Texas @ Austin, 1974. DA7504344. N75-21371.
  1212. EK Crandall
    Fracture toughness of fibre reinforced materials.
    Masters, Syracuse, 1981.
  1213. DA Crane
    Finite element micromechanical analysis of unidirectional composite including longitudinal shear loading
    Masters, Wyoming, 1981
  1214. RM Crane
    Flaw criticality and nondestructive evaluation techniques for advanced composite externally pressurised cylinders.
    Masters, John Hopkins, 1984.
  1215. Roger Michael Crane
    Vibration damping response of composite materials
    PhD, Delaware, 1991. DA9206320. DAIB 52(9)4919.
  1216. JH Cranmer
    Interfacial polymerisation on carbon
    Masters, MIT, 1981.
  1217. AS Crasto
    Electrodeposition of polymer interphase in carbon fibre composites
    Masters, Washington SU, 1983.
  1218. AS Crasto
    Interphase modification in carbon-fibre composites via electrodeposition
    PhD, Washington SU, 1986. DA8621984.
  1219. D Crawford
    The microstructure of carbon fibres- an electron microscope study
    PhD, Leeds, 1972.
  1220. EF Crawley
    The natural mode shapes and frequencies of graphite/epoxy cantilever plates and shells
    Masters, MIT, 1978.
  1221. JL Cribb
    Some aspects of discontinuously reinforced materials
    PhD, Cambridge (& Queensland), 1965-66.
  1222. VN Cribb
    Temperature dependence of stiffness and damping for several metal and polymer matrix composites
    Masters, TA&MU, 1988.
  1223. DB Cripps
    Development of field repair technique for 'mini-sandwich' Kevlar/epoxy aircraft skin
    Masters, NPS Monterey, June 1984. AD A151 369. N85-25439.
  1224. DJ Crispino
    The stability of twisted orthotropic plates
    PhD, Rochester, 1985. DA8516465.
  1225. MO Critchfield
    Dynamic mechanical behaviour of multiphase materials
    Masters, Pennsylvania SU, 1965.
  1226. Philippa Crocker
    Structural effects of oxidation of carbon/carbon composites
    PhD, Bath, 1991. DX96047. DAIB 53(3)1554.
  1227. RB Croman
    Statistical approach to scale effect & residual strength in composite material fatigue
    PhD, Drexel, 1978. DA7817990.
  1228. SM Cron
    Improvement of end boundary conditions for off-axis tension specimen use
    Masters, AFIT, December 1985. AFIT/GAE/AA/85D3. ADA164321. N86-25855.
  1229. PM Cross
    Local deformation effects in bonded fibre fabrics.
    MSc, Manchester, 1968.
  1230. Patricia Margaret Cross
    The impact properties of carbon-fibre composites
    PhD, Guelph-Canada, 1977.
  1231. FW Crossman
    Computer simulation of the deformation of composite and polycrystalline materials by finite element analysis
    PhD, Stanford, May 1972. DA7230617.
  1232. RJ Crowson
    Investigation of the mechanical properties in dilation and shear of crosslinked epoxy resins
    PhD, Bristol, 1978.
  1233. MF Crowther
    Creep and fatigue interactions in GRP
    PhD, Bath, 1987.
  1234. AK Cuckson
    Measurement of fracture energy of aluminium bonded by epoxy resins
    PhD, Bradford, 1988. ASLIB 38(1)1999.
  1235. B Cuerden
    Buckling of a sandwich composite laminated plate by the finite element method
    Masters, MIT, 1971.
  1236. Yingqing Lawrence Cui
    Mechanics of toughening, strengthening and splitting of ceramic composites
    PhD, Harvard University, 1993.  AAD9330891  DAIB54(6)3171
  1237. JS Cullen
    Mode I delamination of unidirectional graphite/epoxy composite under complex load histories
    MS, TA&MU, December 1981. MM-3724-81-13.
  1238. SR Culler
    FT-IR spectroscopic characterisation of an aminosilane coupling agent on glass-reinforced composites
    PhD, CWRU, 1985. DA8510087.
  1239. Ciaran Culligan
    An evaluation of current repair methods for carbon fibre reinforced epoxy aircraft structures'
    MEng, Limerick, 1993.
  1240. JE Cunningham
    Strain pulse propagation in transverse layered composites
    Masters, Florida, 1971.
  1241. TG Cunningham
    Investigation of thermal fatigue in graphite-epoxy fibre composite materials
    Masters, NCSU, 1974.
  1242. Ralf Georg Cuntze
    Grundlagen for die Berechnung von Rotationschalen aus Faserkunststoffverbund
    [Rules for design of fibre reinforced shells of revolution]
    Habitationsschrift, TU Munchen, 1978.
  1243. CA Cura
    High and low energy impact performance of amorphous solvent resistant polyetherimide carbon fibre advanced composite laminates
    Masters, RPI, 1987.
  1244. JI Curiskis
    A study of the micromechanics of fibrous-reinforced composite materials using finite element techniques.
    PhD, New South Wales-Australia, 1978. DA8005385.
  1245. DB Curliss
    Linear and nonlinear viscoelastic behaviour of a series of DGEBA epoxy resins
    Masters, Purdue, 1987.
  1246. JPJ Curran
    Robotic cell for handling aerospace composite materials
    PhD, Queens-Belfast, 1986. ASLIB 36(2) 4150.
  1247. PT Curtis
    The strength of fibre filled thermoplastics
    PhD, Surrey, 1976. D17849/76.
  1248. AC Curtis
    Preparation and properties of oriented glass-filled thermoplastics
    PhD, Leeds, August 1987. D80781. ASLIB 37(4)8289.
  1249. J Curutchary
    On determination of the elastic constants of composite materials by an ultrasonic method
    3eme Doctorate, Bordeaux I, June 1976.
  1250. Anna T Cushley
    The prediction of fibre orientation in short fibre reinforced thermoplastic injection mouldings
    PhD, Cranfield, 1990. DX94757. DAIB 52(10)5518.
  1251. JP Cushman
    Geometric considerations in the design of honeycomb sandwich panel fasteners
    Masters, San Diego State Coll, 1965.
  1252. Willard Ashton Cutler
    Processing & mechanical behavior of high temperature hybrid laminated composites
    PhD, University of California Santa Barbara, 1995, AADAAI9605807, DAIB56(10)227.
  1253. GJ Cyr
    Effects of cutout orientations on natural frequencies and mode shapes of curved rectangular composite panels
    Masters, AFIT WPAFB, December 1986 AFIT/GAE/AA/86D-3. AD A178 638. N87-22813.
  1254. J Cziollek
    Studien zur Beeinflussung des Verstaerktungsverhalten von Kohlenstoffasern durch Oberflachenbehandlungen der fasern und durch Verwendung eines Kohlenstoff/Kohlenstoff-Skelettes als Verstaerktungs-komponente [Study of changes to carbon fibre composites through fibre surface treatment and application of C/C skeletons as reinforcements]
    Dipl.Chem, Karlsruhe, October 1983.
    >>> ER Da Costa Marques, see ERDC Marques.
  1255. JG d'Acquisto
    Helically wound composites for performance enhancement of flexible linkages
    Masters, West Virginia, 1988.
  1256. Mohamed Ahmed Abel-Mohsen Dabaon
    Beitrag zur Yeilweisen Verquebelung bei Verbundtraegern
    Dr Techn, Universitaet Innsbruck (Austria), 1993, AADC507087, DAIC57(4)1367.
  1257. GS Daehn
    Superplasticity and stability in [discontinuous fibre] metal-based composites
    PhD, Stanford, 1988. DA8814995.
    >>> Dafen Ren, see D Ren
  1258. V Daga
    High temperature deformation of PAN-based carbon fibre precursors
    Masters, Georgia IT, 1988.
  1259. NG Dagli
    Improving interface through surface modification by plasma polymerisation in carbon/graphite fibre reinforced polymeric composites
    PhD, Tufts, 1986. DA8616315.
  1260. SS Dagli
    Rheosynergistic polyblends as the matrix for plastics composites with automotive regrind
    Masters, Stevens IT, 1986.
  1261. M Dahan
    Problemes de contact dans la theorie d'elasticite transversalement isotrope
    [Contact problems in the theory of transverse isotropy]
    Thesis, Paris VI, 1980.
  1262. Christian Ulf Dahlen
    Delamination growth in composites under cyclic loads
    PhD, Stanford University, 1993.  AAD9326454  DAIB54(5)2585
  1263. BH Dahlquist
    Evaluation of health aspects of carbon fibres
    Masters, NCCH & AFIT, 1984. AFIT/CI/NR-85-4T. AD A151 563.
  1264. S-R Dai
    Fillers in fibre composites
    MASc, Toronto, 1982.
  1265. Fuling Dai
    Diffusion of fluids through anisotropic nonlinearly elastic solids
    PhD, Pittsburgh, 1990. DA9106019. DAIB 51(10)4915.
  1266. Ji-Dong Dai
    Acoustic and optical propagation in anisotropic fiber waveguides
    PhD, McGill University - Canada, 1992.  AADNN87632  DAIB55(6)2318
  1267. Chunping Dai
    Modelling structure and processing characteristics of a randomly-formed wood-flake composite mat
    PhD, University of British Columbia, 1994.  AADNN89343  DAIB55(8)3090
  1268. DD Dailey
    Prediction of fracture toughness of specially orthotropic composite laminates
    MSc, AFIT @ WPAFB, December 1974.
  1269. A Daimaru
    Stiffness, strength & toughness of metal matrix composites -analytical and experimental research
    MS, Delaware, June 1984.
    >>> C Dai Shik, see DS Choi.
  1270. MH Daken
    Splitting initiation and propagation in flawed unidirectional graphite/epoxy composites under tension-tension cyclic loading
    S.M, MIT, February 1983. TELAC-Report-83-6.
  1271. MHMH Daken
    Notch size effects on splitting damage development in graphite/epoxy under cyclic loading
    PhD, MIT, 1985.
  1272. WC Dale
    A composite materials analysis of the structure, mechanical properties and aging of collagenous tissues
    PhD, CWRU, 1974. DA7422072.
  1273. BR Dale
    A shear deformable finite element for laminated plates
    Masters, Toronto, 1987.
  1274. LR Daley
    Silane coupling agents in glass filled polystyrene
    Masters, Cornell, 1968.
  1275. MF Dalton
    Creep relaxation in multilayer wrapped pressure vessels.
    Masters, Louisiana SU, 1984.
  1276. Ralph d'Ambrosio
    In-plane flexural behaviour of graphite-epoxy quasi-isotropic beam
    MS, CSULB, 1989. MA1337290. MA 28(1)154.
  1277. RAC Dames
    Design, production and fatigue of ARALL lugs.
    Thesis, Delft UT, April 1983. In Dutch.
  1278. Sundaravel Damodaran
    Evolution of structure and mechanical properties during carbonisation of polyacrylonitrile-based precursor fibres
    PhD, Georgia IT, 1992. DA9223776. DAIB 53(4)2040.
  1279. S Damy
    Axial and flexural fatigue behaviour of a carbon fibre reinforced epoxy composite
    MSc, Cranfield IT, 1987.
  1280. JR Dana
    Three dimensional finite element analysis of thick laminated composites-including interlaminar and boundary effects near circular holes
    PhD, VPI&SU, August 1973. DA7423804.
  1281. Sawai Danchaivijit
    Matrix cracking in fiber-reinforced ceramic composites
    PhD, University of Utah, 1994.  AADAAI9514450  DAB56(01)455
  1282. Razan Abdulrahman Dandan
    Self-consistent dynamical theory of composite laminated plates
    PhD, Ohio State University, 1994.  AAD9427692  DAIB55(6)2306
  1283. G D'Andrea
    On thermal conductivity of composites
    PhD, RPI, May 1969. WVT-6915. AD 691 330. N69-40192. DA7002614.
  1284. K Daneshvar
    A study of the frictional and bending forces involved when yarns slide over solid processing machine elements
    PhD, CNAA: Leicester, 1983.
  1285. Ashay Arvind Dani
    Experimental characterization and modeling of electrical percolation phenomenon in short fiber composites
    PhD, Clemson University, 1995, AAD9703382, DAIB57(8)5186.
  1286. KT Danielson
    Bending behaviour of general unsymmetric laminates
    Masters, TA&MU, 1987.
  1287. David Joseph Daniewicz
    Edge delamination in advanced composite laminates, theory and verification
    MS, Arizona, 1990. DA1340280. MA 28(4)634.
  1288. Kathryn Ann Dannemann
    Damage development and failure of fibre-reinforced ceramic matrix composites
    PhD, MIT, 1989. DA-379816.
    >>> EL Dantec, see E Le Dantec
  1289. I Danyliuk
    Mica reinforced polyethersulphone
    Masters, Toronto, 1979.
  1290. Jerome Daoust
    Interlaminar stresses in tapered laminates
    PhD, Concordia, February 1989. DA-565514. DAIB 50(5)2113.
  1291. Peter V Dardzinski
    The mechanics of interleafed high-temperature polymer composites
    MS, Lowell, 1989. MA1337450. MA 28(1)154.
  1292. P Darmon
    Large inextensional deformation of thin orthotropic inhomogeneous cantilevered plates with distributed loads
    PhD, Rochester, 1985. DA8516466.
  1293. M Darvizeh
    Natural frequencies of laminated orthotropic thin circular cylinders
    MSc, Manchester, 1983.
  1294. M Darvizeh
    Free vibration characteristics of orthotropic thin circular cylindrical shells
    PhD, UMIST, 1986.
  1295. FAI Darwish
    The effect of temperature and fibre orientation on the strength and deformation characteristics of fibre composites
    PhD, Stanford, October 1969.
  1296. Karnoketu Das Chowdhury
    Interfaces in silicon carbide whisker reinforced silicon nitride based composites: a high resolution electron microscopy study
    PhD, Arizona SU, 1991. DA9134852. DAIB 52(6)3234.
  1297. A Dasgupta
    Bilinear stress-strain and failure analysis of composite laminates
    MMechEng, Villanova, August 1981.
  1298. Abhijit Dasgupta
    An experimental investigation of homogeneous fatigue damage in a random short-fibre composite under combined tension-torsion loading
    PhD, UIUC, 1989. DA8916235. DAIB 50(5)2018.
  1299. Lawrence Christopher Dash
    The mechanism of corrosion and corrosion control of aluminium/graphite metal matrix composites
    PhD, Ohio SU, 1988. DA8820279. DAIB 49(8)3381.
  1300. Phiroze Homi Dastoor
    Computer-assisted structural design of industrial woven fabrics
    PhD, NCSU Raleigh, 1989. DA9004664. DAIB 50(11)5294.
  1301. PG Date
    Vibration analysis of non-homogeneous beams
    Masters, Kansas SU, 1969.
  1302. P Datta
    Process development and property evaluation of polymer coated glass fibre fabrics
    MS, IIT-Madras, 1984.
  1303. RV Daugherty
    Noncylindrical shells of pyrolytic graphite type materials
    Masters, Delaware, 1969.
  1304. RL Daugherty
    Stresses and displacements in shells of revolution of composite materials
    PhD, Delaware, 1971. DA7214509.
  1305. TH Daugherty
    Dynamic wetting of single pulp fibres
    MS, University of Washington-WA, 1981.
  1306. H Dauksch
    Influence de l'oxydation des fibres de carbone sur leur proprietes superficielles et adhesives
    [Influence of oxidation of carbon fibres on surface and adhesive properties]
    Dissertation, Haut-Rhin, 1973.
  1307. RJ Dauksys
    Thermal and chemical treatments of high modulus graphite fibres as related to epoxy matrix composites
    Masters, MIT, 1970.
  1308. RS Dave
    Computer-aided processing of composites.
    DSc, Washington University-MO, 1986. DA8727902.
  1309. OB Davenport
    Buckling of orthotropic curved sandwich panels subject to edge shear and axial compression
    MS, Oklahoma, 1972.
  1310. M Davidovitz
    Fracture mechanisms in Kevlar fibre reinforced composite materials
    MSc, Hebrew Univ-Israel, 1983.
  1311. GW Davidson
    Anisotropic scattering in an inhomogeneous planar medium
    Masters, Missouri-Rolla, 1980.
  1312. PA Davidson
    Composite fighter wing structured tactical air forces: engine shop requirements
    Masters, AFIT, September 1987. AFIT/GLM/LSM/87S-18. AD A186 753.
  1313. Barry Daniel Davidson
    Two new techniques for predicting delamination crack growth in laminated plates
    PhD, TA&MU, 1988.  DA8913346.  DAIB 50(4)1516.
  1314. P Davies
    Delamination behaviour of thermoplastic matrix composites
    Doctorate, UT Compiegne, December 1987.  In French.
  1315. Carlos Guido Davila
    Delamination initiation in postbuckled dropped-ply laminates
    PhD, VPI&SU, 1991. DA9218021. DAIB 53(1)404.
  1316. JG Davis
    Compressive strength of lamina reinforced and fibre reinforced composite materials
    PhD, VPI&SU, May 1973. DA7326264.
  1317. SJ Davis
    Thermal deformation of various composite material ski construction
    Masters, Wyoming, 1981.
  1318. RL Davis
    Design parameters of weft insertion warp knitted industrial fabrics
    Masters, NCSU, 1986.
  1319. Patricia Andrea Davis
    A biodegradable artificial composite tendon prosthesis
    PhD, Connecticut, 1990. DA9100610. DAIB 51(8)3869.
  1320. Janet Beth Davis
    Fiber coatings for brittle matrix composites
    PhD, University of California - Santa Barbara, 1993.  AAD9419063  DAIB55(2)547
  1321. JR Dawson
    The compressive properties of fibre reinforced rigid low-density polyurethane foams
    PhD, Liverpool, 1981.
  1322. KS Dawson
    An integrated study of structures, aerodynamics and controls on the forward swept wing X29A and the oblique wing research aircraft
    Masters, Kansas, 1988.
  1323. V Dayal
    Non-destructive evaluation of fibre-reinforced composites by ultrasound
    PhD, TA&MU, 1987. DA8808752. DAIB 49(4)1257.
  1324. SK De
    Computer-assisted infra-red spectroscopy of some synthetic fibres
    PhD, Bradford, October 1982. D45747/83.
  1325. SFM de Almeida
    Boundary layer solutions for the free edge problem in composite laminates
    PhD, Kansas, 1987. DA8727587.
  1326. Nancy Frier Dean
    Plane front stability and cellular solidification in fiber reinforced aluminum-copper alloys
    PhD, Massachusetts Institute of Technology, 1992.  AAD0572320  DAIB53(7)3738
  1327. EEA de Aragao
    Etude de l'endommagement par eau de composites par essais de chocs en flexure
    [Study of damage to composites by water through bending trials]
    DIng, Bordeaux I, July 1986. No.395.
  1328. FFT de Araujo
    Some electrical and thermal properties of composite materials
    PhD, Oxford, 1975. D15979/xx.
  1329. Antonio Ramirez de Arellano Lopez
    Microstructure and plastic deformation of the composite silicon carbide (whiskers)/alumina
    [Microestructura y deformacion plastica del compuesto SiCw/Al2O3]
    PhD, Universidad de Sevilla - Spain, 1991.  AADC305259  DAIC54(4)1273
  1330. JW Deaton
    An experimental investigation of effect of slit length on bursting strength of film and fabric plastic cylindrical shells
    Masters, VPI, 1967.
  1331. GR de Baise
    Mechanics and morphology of wood shear fractures.
    PhD, Syracuse, 1970. DA7107755.
  1332. S de Becker
    Studie van de aanhechting tussen een elastische en een visco-elastische lag
    [Study of joints between elastic and visco-elastic layers]
    Afstudeerwerk, VUB Brussels, 1981.
  1333. Gerard Debicki
    Contribution l'etude du role de fibres dispersees anisotropiquement dans le mortier de ciment sur les lois de comportement,les criteres de resistance et la fissuration du materiau [Study of the role of partially oriented fibres in cement mortar on composite behaviour laws, strength criteria and crack resistance]
    DE, INSA Lyon, 1988. DA-C171269. DAIC 52(2)280.
  1334. Gal Debotton
    The constitutive behavior of nonlinear anisotropic composites
    PhD, University of Pennsylvania, 1993.  AAD9321379  DAIB54(3)1616
  1335. FJ Deblase
    Conformational change, chain orientation and crystallinity in poly(ethylene terephthalate) yarns: Raman and FT-IR study
    PhD, PINY, 1986. DA8617275.
  1336. Martin Deblois
    Reinforcement in bending of reinforced concrete beams by composite materials
    Renforcement en flexion de poutres en beton arme a l'aide de materiaux composites
    MSc, Universite Laval - Canada, 1993.  AADMM85613  MA32(5)1429
  1337. Stefaan de Bondt
    Squeeze casting of fibre-reinforced aluminium and dynamic aspects of debonding
    Persgieten van vezelversterkt aluminium en dynamische aspekten van adhesiebreuk
    Dr, Katholieke Universiteit Leuven, 1993.  AADC323841  DAIC55(1)292
  1338. Gal Debotton
    The constitutive behavior of nonlinear anisotropic composites
    PhD, University of Pennsylvania, 1993.  AAD9321379  DAB54(3)1616.
  1339. Jonas De Carvalho
    Computer-integrated design optimisation and manufacturing of filament-wound parts
    PhD, Katholieke University, 1996, AADC524984, DAIB58(1)C249.
  1340. Casimer Maurice Decusatis
    Theory and signal processing applications of the acousto-electro-optic interaction in anisotropic media
    PhD, RPI, 1990. DA9031788. DAIB 51(5)2520.
  1341. JJ de Espindola
    Numerical methods in wave propagation in periodic structures
    PhD, Southampton, May 1974. DX89518.
  1342. Joris Achiel Degrieck
    Analysis of impact on a fibre reinforced polymer
    Analyse van impact op een vezelversterkte kunststof
    Dr, Rijksuniversiteit te Gent, 1990.  AADC267466  DAIC54(1)328
  1343. B Degrigny
    Characterisation of carbon fibre laminates based on an advanced epoxy matrix
    MSc, Cranfield IT, 1987.
  1344. S de Jong
    A study of fabric mechanics using energy methods of analysis
    PhD, New South Wales-Australia, 1976.
  1345. T de Jong
    On the calculation of stresses in pin-loaded anisotropic plates
    Dissertation, TU Delft NL, 1987. DAIC 49/1982.
  1346. R de Kruijff
    ARALL as crackstopper material.
    Thesis, Delft UT, October 1985.
  1347. F Delale
    Fracture of composite orthotropic plates containing periodic buffer strips
    PhD, Lehigh, 1976. DA7621807.
    >>> MEZ de Leon, see ME Zermeno de Leon
  1348. G Delonge
    Anforderungssystem an ein CAD-System fur die Erarbeitung von Prozessdaten beim Faserwickelverfahren
    [CAD system for numerical control in filament winding]
    Diploma, IKV Aachen, 1986. D8640.
  1349. ED del Valle
    In depth response of ablative composites
    PhD, Louisiana SU, 1975. DA7522199.
  1350. RP Demchik
    Marine environment effects on fatigue crack propagation in GRP laminates for hull construction
    Masters, MIT, 1973.
  1351. R Demchik
    Effect of water on the crack propagation rate in fibrous laminates under static and dynamic loading
    Thesis, MIT, 1975.
  1352. TW Demint
    Thermal analysis of tooling during the manufacturing of composite materials
    Masters, Delaware, 1988 (in progress).
  1353. Ismail Demir
    Circular dislocation loops and their application to the micromechanics of fibrous composites
    PhD, Washington State University, 1992.  AAD9238394  DAIB53(8)4322
  1354. G de Naegel
    Analysis of edge effects in lightweight composite materials
    Masters (Civil Eng), KUL Belgium, 1986. In Dutch.
  1355. Jo Dendauw
    Mechanical properties of knitted composites
    Dissertation, KIHWV Oostende, no date.
  1356. JC Dendis
    Damage initiation in two-dimensional woven carbon-carbon composites
    Masters, AFIT @ WPAFB, 1988.
  1357. Petrus den Exter
    Synthesis, microstructure and mechanical properties of zirconia-alumina composites
    Doctorate, Twente, 1991. DA-C239793. DAIC 53(3)577.
  1358. Yong Deng
    Analysis of diffusional limitations on the cure of epoxy and cyanate ester resins
    PhD, Syracuse University, 1994. AADAAI9516442  DAB56(1)378
  1359. P Denizet
    Methodes de conception et analyse par element finis de structures de revolution stratifies
    [Design and finite element analysis of filament wound structures]
    D.Ing, Institut Superieur des Materiaux et Construction Mecanique a Paris St.Ouen, 31 May 1985.
  1360. ST Dennis
    Unsymmetric laminated graphite/epoxy composite plate and beam analysis for determining coefficients of thermal expansion.
    Masters, AFIT WPAFB/MIT, February 1983. AFIT/CI/NR-83-5T. AD A128 625. N83-35416.
  1361. Scott Thomas Dennis
    Large displacement and rotational formulation for laminated cylindrical shells including parabolic transverse shear
    PhD, AFIT, 1988. DA8821883. DAIB 49(8)3307.
  1362. LR Deobald
    Determination of elastic constants of orthotropic plates by a nodal analysis/Rayleigh-Ritz technique
    Masters, Idaho, 1985.
  1363. JE de Oliveira
    Thermal properties of epoxy resin systems at low temperatures
    DPhil, Oxford, October 1986. D75144/87. ASLIB 37(1)0821.
  1364. H Derek
    Zur technologie der Verarbeitung von Harzmatten [Technology of processing for resin matting]
    Dissertation, RWTH Aachen, 1982. DS7208.
  1365. Valerie Derlich
    Polymeric composites: synthesis of monodisperse filler particles and mechanical characterisation
    PhD, Southern California, 1990. DA-569644. DAIB 51(11)5349.
  1366. Muriel Marie Desaeger
    An integrated theoretical and experimental study of the fibre-matrix interface in carbon-epoxy composites
    PhD, Katholieke Universiteit Leuven - Belgium, 1993.  AADC359633  DAIC55(3)990
  1367. VD Desai
    Modal density of a composite structure
    Masters, NCSU, 1968.
  1368. SV Desai
    Development of polymer concrete
    MTech, IIT-Madras, 1985.
  1369. MC Desai
    Rayleigh-Ritz models for sound transmission through composite and stiffened plates
    Masters, Missouri-Rolla, 1986.
  1370. P Desai
    Fundamental aspects of crystallisation and thermorheological behaviour of uniaxially oriented polymers
    PhD, Georgia IT, 1988. DA8820814. DAIB 49(7)2748.
  1371. M Deschamps
    Etude en ondes planes et fasceaux bornes de la refraction a une interface liquide-solide, application a la caracterisation viscoelastiques des composites [Study of plane and rod waves in refraction at a solid-liquid interface, use to characterise viscoelastic composites]
    PhD, Bordeaux-I, 1985.
  1372. Nikola Deskovic
    Innovative design of FRP composite members combined with concrete
    PhD, Massachusetts Institute of Technology, 1993.  AAD0573220  DAIB54(6)3234
  1373. Glenn Peter Desio
    Crystallisation processes in thermoplastic composites: a study of fibre-reinforced poly(phenylene sulphide)
    PhD, Princeton, 1990. DA9110395. DAIB 51(11)5459.
  1374. Jose Paulino de Souza
    An investigation of the effects of shear-free deformation and the role of miscibility on the structure and properties of in-situ thermoplastic composites
    PhD, Virginia Polytechnic Institute and State University, 1994.  AAD9424879  DAIB55(5)1935
  1375. P Destuynder
    Sur une justification des modeles de plaques et de coques par les methodes asymptotiques
    [Justification for modelling plates & shells by asymptotic methods]
    Doctorat es Sciences Mathematiques, Paris VI: P&M Curie, 1980.
  1376. SJ de Teresa
    Axial compressive strength of high performance PPTA polymer fibres
    PhD, Massachusetts, 1985. DA8509538.
  1377. KL Devi
    Effects of fillers and additives on the processability and properties of reinforced plastics
    MTech, IIT-Madras, 1980.
  1378. TA de Vilbiss
    Carbon fibre surface treatments for improved adhesion to thermoplastic polymers
    PhD, VPI&SU, 1987. DA8725114.
    >>> BDU de Villereglan, see B D'Uston.
  1379. DF Devitt
    Delamination fracture toughness of a unidirectional composite
    MS, TA&MU, August 1979.
  1380. L de Wilde
    Analyse van een eindig element voor schalen in komposiet
    [Study of a finite element for composite shells]
    Afstudeerwerk, VUB Brussels, 1986.
  1381. B Dewimille
    Viellissement hygrothermique d'un materiau composite fibres de verres-resine epoxyde
    [Hygrothermal ageing of glass fibre-epoxy resin composite material]
    DIng, EMP Evry, 3 July 1981.
  1382. HB Dexter
    Correlation of three standard shear tests for unidirectional glass/epoxy composites
    Masters, VPI&SU, 1967.
  1383. A Deylami
    Etude de comportement statique en regime elastique d'une dalle orthotrope sur quatre appuis
    {Static elastic loading of an orthotropic slab on four supports]
    Dissertation, Paris VI, 1974.
  1384. LR Dharani
    Analysis of a hybrid unidirectional laminate with damage
    PhD, Clemson, 1982. DA8300096. N83-33951.
  1385. AN Dharia
    Analysis of dip-coating of solid and fibrous substrates.
    PhD, Lowell, 1986. DA8629633.
  1386. A Dhingra
    Effect of matrix strengthening and fibre coating on the mechanical behaviour of boron-magnesium composites
    DSc, Washington University-MO, 1970.
  1387. Ramakrishna Dhulipala
    Microwave processing of vinyl esters and vinyl ester/glass fiber composites
    MS, Michigan State University, 1993.  AAD1354863  MA32(3)1008
  1388. AR Diba-Kazerani
    Statistical engineering properties of open mould laminates
    Masters, CSULB, 1987.
  1389. JJ Dibb
    Mechanical properties of unidirectional fibre composites under superposed hydrostatic pressures
    PhD, Bradford, 1975.
  1390. CM Dicke
    Beitrag zm Verhalten textiler Flaechengebilde bei unterschiedlicher Verformungsgeschwindigkeit
    Dissertation Promotionsordnung A, TH Leipzig, 1984.
  1391. RP Dickenson
    Continuous casting of eutectic fibre composite sheets.
    Masters, MIT, 1969.
  1392. JA Dickinson
    The improvements in performance from using carbon fibre composite in the design of a strike aircraft wing
    MSc, Cranfield IT, September 1971.
  1393. RF Dickson
    Environmental fatigue of composite materials.
    PhD, Bath, 1984. D55082/85. ASLIB 36-1882.
  1394. JE Diebler
    Evaluation of strain energy release rate as a debonding criterion for graphite/epoxy composite using finite element method
    Masters, Tulsa, 1985.
  1395. CF Diegert
    The probability of survival of redundant systems under static load
    PhD, Cornell, 1980. DA8020810.
  1396. John F Digregorio
    Optical characterization of silicon carbide and silicon carbide reinforced composites
    PhD, Colorado School of Mines, 1993.  AAD0574431  DAIB54(12)6275
  1397. DA Dillard
    Creep and creep rupture of laminated graphite/epoxy composites
    PhD, VPI&SU, March 1981. N81-23193. N82-13173. DA8121498. VPI-E-81-3.
  1398. E Dilley
    Fracture of graphite composites under shock loading.
    Masters, MIT, 1974.
  1399. J Dimmock
    The deformational characteristics of anisotropic glass-filled thermoplastics
    MSc(Eng), London: ICST&M, 1968.
  1400. MT di Nardo
    Buckling and postbuckling behaviour of laminated composite plates with ply drop-offs
    Masters, MIT, 1986.
  1401. Y Ding
    Weight optimisation of structures.
    Licentiate, KTH Stockholm, 1986. KTH-Report-86-18.
  1402. Shiliang Ding
    Mixed mode failure analysis of adhesively bonded composite systems using the modified Iosipescu method
    PhD, Oregon Graduate Institute of Science & Technology, 1995.  AADAAI9528085  DAB56(4)2258
  1403. SM Dinh
    On the rheology of concentrated fibre suspensions
    Sc.D, MIT, 1981.
  1404. Albert John Dinicola
    Numerical evaluation of three-dimensional crack-tip integrals for layered anisotropic solids
    EngScD, Columbia University, 1993.  AAD9412745  DAIB54(12)6416
  1405. PP Dinyovszky
    Finite element techniques for the dynamic analysis of unsymmetrically laminated plates
    PhD, Stevens IT, 1973. DA74868.
  1406. JAA Dios: see JA Alvarez Dios
  1407. DM di Santo
    Pattern profiles and fabric properties affecting tailorability
    Masters, NCSU, 1988.
  1408. AK Ditcher
    The non-linear stress-strain behaviour of carbon fibre reinforced plastic and its effect on the analysis of laminated plates and sandwich beams
    PhD, Bristol, 1981.
  1409. FA Dittoe
    Buckling of stiffened orthotropic cylinders under combined loading
    Masters, San Diego State Coll, 1967.
  1410. RR Diverdi
    A two-dimensional heat transfer, variable properties, computer program for a slab of composite material
    Masters, Worchester PI, 1966.
    >>> G Di Vita, see G di Vita
  1411. P Diwan
    The effect of fibre shape on compressive properties of composites
    Masters, Clemson, 1985.
  1412. AP Diwanji
    MS, Delaware, 1987.
  1413. Ashish P Diwanji
    Interface characterization of carbon/aluminium composites
    PhD, Delaware, 1990. DA9101065. DAIB 51(8)4006.
  1414. SC Dixon
    Buckling of orthotropic truncated conical shells with elastic edge restraint subjected to lateral pressure and axial load
    PhD, VPI&SU, 1967. DA6711371.
  1415. RG Dixon
    Microstructure property relationships for carbon fibre reinforced aluminium alloys
    Masters, MIT, 1985.
  1416. PB Djatmiko
    Mechanical properties and nondestructive evaluation of carbon fibre reinforced polymers
    Masters, MIT, 1985.
  1417. Cong Doan
    Contribution a l'etude du comportement dynamique et au choc des materiaux et des structures composites [Contribution to the investigation of dynamic and impact behaviours
    of composite materials and structures]
  1418. DE, INSA Lyon, 1989. DA-C123155. DAIC 51(2)314.
  1419. BJ Dobson
    Creep of carbon fibre reinforced polyester resin
    PhD, Southampton, 1970.
  1420. SK Dobbs
    Sound attenuation characteristics of three dimensional integrally woven fibreglass and polyimide resin material applied to ducts
    Masters, CSULB, 1979.
  1421. GF Dodd
    Glass reinforced plastic shipbuilding.
    MSc, Strathclyde, 1986. ASLIB 36(3)6697.
  1422. LH Dodge
    Structural design and analysis of a composite wing.
    Masters, Rutgers, 1970.
  1423. M Dody
    <generalised Maxwell model>
    These #6, Besancon, 1985.
  1424. TA Doederlein
    Damping characteristics of advanced carbon-carbon and thermoplastic materials
    Masters, AFIT @ WPAFB, 1988.
  1425. FM Doeing
    Stresses and deflections in layered and sandwich beams.
    Masters, Cornell, 1973.
  1426. MP Doherty
    Characterisation of the porous microstructure of decomposing glass-filled polymer composites
    Masters, Rhode Island, 1988.
  1427. JD Dolan
    Modelling fibre reinforced brittle materials using finite elements with modified stiffness matrices
    Masters, University of Washington-WA, 1983.
  1428. Charles William Dolan
    Prestressed concrete using Kevlar reinforced tendons
    PhD, Cornell, 1989. DA8924618. DAIB 50(7)3051.
  1429. E Dolfen
    Bemessungsgrundlagen fuer tragende Bau-elemente aus Glasfaser verstarkten Kunststoffen, insbesondere durch glasseidenmatten bewehrten Polyesterharzen
    [Fundamental measurements for load-bearing structural elements of glassfibre reinforced plastics, example of glass mat reinforced polyester resin]
    Dissertation, RWTH Aachen, 1969. DS6907.
  1430. G Dollmann
    CFK-pleuel [CFRP connecting rod]
    Studienarbeit (not Dissertation), IKV-Archiv-Nr-S8307, 1983!.
  1431. SL Donaldson
    Mode III interlaminar fracture characterisation of composites
    MS, Dayton, April 1987.
  1432. Steven Lee Donaldson
    Monitoring structural integrity by pattern recognition
    PhD, Stanford University, 1993.  AAD9326457  DAIB54(5)2704
  1433. Jennifer Jingxuan Dong
    A continuum mixture theory of wave propagation in axially polarized piezoelectric fibrous composites
    PhD, University of Cincinnati, 1993.  AAD9329953  DAIB54(6)3200
  1434. FJ Donnachie and KJ Skirkowski
    Carbon fibre-foam torsion member
    BS, Bristol, June 1978. BU-216. N79-23150.
  1435. TM Donnellan
    Curing of a bisphenol-A type epoxy resin with 1,8-diamino-p-methane
    Masters, MIT & NADC Warminster, June 1982. NADC-83146-60. AD A138 977. N84-22761.
  1436. Thomas Michael Donnellan
    Investigation of structure-property relationships in bismaleimide resin systems
    ScD, MIT, 1988. DA0378795.
  1437. Richard Patrick Donovan
    A mixture theory approach to composite structural analysis
    PhD, University of Wyoming, 1992.  AAD9303217  DAIB53(9)4766
  1438. RP Donti
    Optimisation by statistical experimental methods of the pultrusion process for graphite epoxy composites
    Masters, Mississippi, 1988.
  1439. Rajendra Prasad Donti
    Experimental evaluation of the effects of pultrusion process variables on fatigue damage in graphite-epoxy
    PhD, University of Mississippi, 1992.  AAD9312802  DAIB 54(1)433
  1440. M Dootson
    Creep of glass reinforced plastics
    PhD, Southampton, 1975!
  1441. D Doraiswamy
    Rheology of polymeric liquid crystals
    Masters, Delaware, 1986.
  1442. D Doraiswamy
    The dynamics of polymeric liquid crystals
    PhD, Delaware, 1987.
  1443. Konrad Ernst Dorninger
    Development of nonlinear FE-algorithms for modelling shell structures consisting of composite materials
    Entwicklung von nichtlinearen FE-algorithm zur berechnung von schalenkonstruktion aus faserverbundstoffen
    DrTechn, Technische Universitaet Wien - Austria, 1989.  AADC273590  DAIC54(1)328
  1444. M Dorosh
    Damage growth during cyclic bending of composites.
    Masters, UBC-Vancouver, 1987.
  1445. MM Doroudian
    Ultrasonic guided wave inspection of adhesively bonded composite joints
    Masters, Oklahoma, 1987.
  1446. ET Dortignac
    Buckling of rectangular orthotropic plates
    Masters, Maryland, 1970.
  1447. LR Doshi
    Experimental investigation on impact resistance of curved reinforced plastic surfaces
    Masters, Tennessee @ Knoxville, 1968.
  1448. SR Doshi
    Moulding, structure and mechanical properties of short glass fibre reinforced thermoplastic composites
    Masters, McGill, 1983
  1449. Helen Doubravszky
    Material model for structural design of building and engineering structures from viscoelastic materials
    Dissertation, Hungarian Academy of Sciences, 1985. In Hungarian.
  1450. KM Dougan
    Acoustic emission of adhesively bonded lap joints in fiberglass composites
    MS, MIT, May 1981.
  1451. CB Doughty
    Viscoelastic analysis of fibre reinforced composite materials
    Masters, MIT, 1968.
  1452. DA Douglass
    Stresses due to environmental conditioning of cross-ply graphite/epoxy laminates
    MSc, TA&MU, August 1979.
  1453. CD Douglas
    Advanced composite applications to large calibre weapon systems
    Masters, Lowell, 1980.
  1454. William B Downs
    Secondary growth of carbon filaments from parent fibers for the devlopment of 3-D preforms
    PhD, Auburn University, 1992.  AAD9310980  DAIB53(12)6491
  1455. LE Doxsee
    Hygrothermal deformations of laminated composite shells
    PhD, Stanford, 1988. DA8814998.
  1456. JD Dozier
    Time-dependent response of filamentary composite spherical pressure vessels
    Masters, Alabama @ Huntsville, 1983.
  1457. JD Dozier
    Creep-rupture model for filament-wound spherical pressure vessels
    PhD, Alabama @ Huntsville, 1985. DA8519061. N86-19607.
  1458. Theodore Nicolas Dracopoulos
    Aeroelastic control of composite lifting surfaces: integrated aeroelastic control optimisation
    PhD, Ohio SU, 1988. DA8907212. DAIB 50(1)254.
  1459. Thomas Louis Dragone
    An experimental and numerical investigation of the high-temperature creep properties of fibre-reinforced metal matrix composites
    PhD, Stanford, 1991. DA9205623. DAIB 52(9)4920.
  1460. Stephen Drappel
    Studies on the morphology and rheology of composites of a thermotropic liquid crystalline polymer with low temperature
    PhD, University of Waterloo, 1994.  AADAAINN94747  DAB56(2)955
  1461. Roderick Charles Drew
    An investigation into damage initiation and propagation in carbon fibre reinforced plastics
    PhD, Southampton, April 1988. DX78313. ASLIB 39(1)1945. DA-149415. DAIC 51(4)643.
  1462. RL Dring
    Three dimensional photoelastic analysis of the stress distribution around an array of rigid inclusions in an infinite plate pulled in uniaxial tension
    Masters, S.Florida, 1971.
  1463. HD Driver
    The structural design and analysis of a composite glider wing
    Masters, RPI, 1977.
  1464. P Drosos
    Compression fatigue behaviour of a unidirectional glass-fibre lamina in the presence of imbedded delaminations
    MPhil, Southampton, 1985. ASLIB 37(2)3939.
  1465. DH Droste
    Modification of polymer properties due to the presence of inorganic filler materials
    DSc, Washington University-MO, 1969. DA6915232.
  1466. Edward Kent Drown
    Characterisation of the interphase and its influence on the behaviour of glass fibre-reinforced epoxy composites
    MS, Michigan SU, 1991. MA1346264. MA 30(2)338.
  1467. E Drukker
    Impact properties of Kevlar/carbon fibre hybrids
    MSc, Hebrew Univ-Israel, 1985.
  1468. CM Drum
    Mechanical properties of filamentary crystals of refractory oxides
    MS, Virginia, June 1961.
  1469. H-YI Du
    Vibration and buckling of geometrically imperfect laminated cylindrical shells
    PhD, Ohio SU, 1987. DA8717625.
  1470. Jean-Patrick Ducroux
    Glass transition in thermorheologically complex materials
    PhD, Case Western Reserve University, 1994.  AAD9502006  DAIB55(8)3523
  1471. VJ Dube
    Analysis of bimaterial circular plates
    Masters, Marquette, 1968.
  1472. Marie-Pierre Dubuisson
    Multi-sensor fusion for nondestructive inspection of fibre reinforced composite structures
    MS, Michigan SU, 1991. MA1346265. MA 30(2)323.
  1473. David William Duff
    Nitrogen-15 and carbon-13 CP/MAS NMR characterisation of MDI-based resin systems
    PhD, Colorado SU, 1990. DA9029413. DAIB 51(6)2905.
  1474. TA Duffy
    Characterisation of the mechanical behaviour of random short-fibre/epoxy composites
    MS, Washington University-MO, 1974.
  1475. V Dufour
    Design of polymeric composite material risers
    Masters, MIT, 1986.
  1476. Paul Bertrand Dufour
    Structural instability and material failure of a J-stiffened stitched composite shear panel
    MS, California State University, 1995.  AADAAI1362269  MA33(6)1953
  1477. RA Duke
    Control of dimensions and quality of weft knitted fabrics.
    PhD, CNAA: Leicester, 1983.
  1478. R Dukes
    Failure mechanisms in glass reinforced plastics
    PhD, Nottingham, 1968.
  1479. Florangel Dilig Duldulao
    Toward oxidatively stable interfaces in fiber-reinforced ceramic matrix composites:  syntheses and characterization of fluoridated layer silicates from sol-gel derived precursors
    PhD, Cornell University, 1994.  AAD9409533  DAIB54(10)5139
  1480. KC Dullea
    Optimum design of wide sandwich beams
    Masters, UCLA, 1968.
  1481. JP Dumoulin
    Traitment du signal adapte au controle de materiau composite par ultrasons: representation conjointe temps-frequence [Signal analysis to control composite materials with ultrasound]
    Doctorate, UT Compiegne, 1986.
    >>> P Dunag Tuang, see Pham Dunag Tuang.
  1482. David Christophe Dunand
    Mechanics and structure of dislocations induced by thermal mismatch in composite materials
    PhD, MIT, 1991. DA-570459. DAIB 52(7)3837.
  1483. S Dunbar
    A cost analysis of composite prepreg material.
    BS in ME, MIT, June 1986.
  1484. LB Duncan
    A comparitive study of finite element models for waves and vibrations of laminated plates
    Masters, UCLA, 1976.
  1485. DI Dunlap
    A finite element technique for stress analysis of helically wound laminated composite cylinders
    Masters, Michigan TU, 1984.
  1486. SD Dunmead
    <self-propagating high-temperature synthesis of composite material>
    MS, Ohio SU, 1987.
  1487. Martin Leonard Dunn
    Thermal, mechanical and electroelastic behavior of composite materials
    PhD, University of Washington, 1992.  AAD9230355  DAIB53(6)3109
  1488. Thomas John Dunyak
    Properties and performance of a ceramic composite component
    PhD, VPI&SU, 1991. DA9136284. DAIB 52(7)3837.
  1489. L Dupont
    Etude du comportement mecanique d'un composite stratifie graphite/epoxy soumis a des sollicitations monotones et cycliques [Static and fatigue loading of graphite/epoxy composite]
    Masters, Sherbrooke, 1988.
  1490. TD Dupont
    Damage initiation in the short beam shear test of composite materials
    Masters, AFIT @ WPAFB, 1988.
  1491. RM Dupuis
    Analysis, design and optimization of fibre reinforced plastic beams
    PhD, Wisconsin, 1973. DA7400480.
  1492. J Durkop
    Beitrag zur stabilitat gebetter Zylinderschalen aus glasfaserverstarkten ungesattigen Polyesterharzen
    [Stability study of a straight glass/polyester shaft]
    Dissertation, RWTH Aachen, 1974.
  1493. H Durlofsky
    The effects of interlaminar shear on the bending and buckling of fibre reinforced composite flat and curved plates.
    PhD, Stanford, 1971. DA7119677.
  1494. B D'Uston de Villereglan
    Conception et analyse mecanique de structures textiles tendus
    [Form-finding and mechanical analysis of prestressed textile structures]
    DI, INSA Lyon, 1987. DAIC 49(2)1393. DAIC 49(4)2902.
  1495. Charles Dirk Duthler
    Characterization of contaminated wipers generated by the composites industry
    MT, Arizona State University, 1994.  AADAAI1360527  MA33(4)1209
  1496. Indranath Dutta
    Accelerated aging of metal matrix composites
    PhD, Texas @ Austin, 1988. DA8909651. DAIB 50(2)708.
  1497. Ashim Dutta
    Rubber modification of phenolic resin via compositional quenching
    PhD, Rensselaer Polytechnic Institute, 1994.  AAD9434560  DAIB 55(8)3444
  1498. M Dybala
    Torsion of bars having multiply connected and composite cross sections
    Masters, SUNY Buffalo, 1986.
  1499. SJR Dyer
    Elastic anisotropy in fibre reinforced composites.
    PhD, Leeds, September 1986. D71857/87. ASLIB 36(3)5304.
  1500. CT Dyka
    Vibration & stability of beam reinforced polar orthotropic annular plates of uniform and variable thickness
    PhD, Connecticut, 1978. DA7911363.
  1501. Yuris Albert Dzenis
    Stochastic damage evolution modeling in laminates
    PhD, University of Texas at Arlington, 1994.  AADAAI9509726  DAB55(11)4955.
  1502. TS Dziemianowicz
    Topics in graphite intercalation chemistry with application to fibre reinforced composites
    PhD, Pennsylvania, 1983. DA8316010. N84-14248.
  1503. JW Early
    Compression induced delamination in a unidirectional graphite/epoxy composite
    MS, TA&MU, December 1981. MM-3724-81-14.
  1504. JW Eason
    Investigation of elongation of boron filament during fabrication and annealing
    PhD, Virginia @ Charlottesville, 1979. DA8004675. N80-20310.
  1505. JD Easterday
    Acoustic emission, fracture strength relations of Al/Gr composites
    Masters, Washington SU, 1988.
  1506. J Eastham
    The characterisation of a carbon fibre reinforced plastic lamina and application to the predicted strength of multilayer laminates
    MSc, Salford, 1986. ASLIB 36(2) 4377.
  1507. GA Eaton
    Ballistic damage of graphite-epoxy plates
    MS, NPS Monterey, June 1977. N77-32251. AD A042 296.
  1508. D Ebbing
    Viscoelastic analysis of fibre reinforced composite ply
    Masters, SUNY Buffalo, 1987.
  1509. AT Echtermayer
    Notch sensitivity of composites
    Masters, MIT, 1985.
  1510. Andreas Thorsten Echtermeyer
    Effect of damage on the strain concentration ahead of a notch in crossplied composites
    PhD, MIT, 1988. DA-379518.
  1511. AJ Eckel
    Mechanical and thermomechanical properties of CVI silicon carbide matrix continuous ceramic fibre composites
    Masters, University of Washington-WA, 1987.
  1512. GC Eckold
    An investigation into the strength and elastic properties of filament wound composites
    PhD, UMIST, September 1978. D44543/83.
  1513. FD Eckstein
    On the specially orthotropic free-free-free-free square plate in resonance
    MS, Pennsylvania SU, 1986.
  1514. DL Edberg
    Measurement of material damping in simulated space environment
    PhD, Stanford, 1985. DA8506182.
  1515. JG Eden
    Application of ultrasonics to assess damage in composite materials
    MS, TA&MU, December 1985.
  1516. JF Eder
    Finite element analysis and optimal design of fibre reinforced laminated composite structures
    Masters, Clarkson CT, 1984.
  1517. James E Eder
    A viscoelastic anisotropic wave propagation model for composite cure evaluation
    PhD, Drexel University, 1994.  AAD9420297  DAIB55(3)991
  1518. GP Edmonds
    The pleasure boat market in the US: an analysis of which factors influence the demand for small boats, how the demand may be practiced, and a discussion of how the market is segmented.
    Masters, MIT, 1984.
  1519. RF Eduljee
    Process-induced fibre orientation and weld line studies on TMC and BMC materials
    Masters, Delaware, 1987.
  1520. Rushad F Eduljee
    The effect of microstructure on residual stress development in short fibre composites
    PhD, Delaware, 1991. DA9206363. DAIB 52(9)4920.
  1521. KL Edwards
    Advanced computerised numerical control (CNC) filament winding of complex fibre-reinforced plastic (FRP) shapes.
    PhD, Nottingham, 1985. D65913/86.
  1522. BD Edwards
    Development of test methods for structural characterisation of high temperature fibre reinforced composites.
    Masters, MIT, 1985.
  1523. Lawrence Joseph Effler
    Small angle X-ray scattering of carbon and Kevlar fibres under load
    PhD, Tennessee, 1990. DA9121710. DAIB 52(3)1660.
  1524. DM Egan
    Acoustic emission analysis of fibre composite failure mechanisms
    Masters, MIT, May 1977.
  1525. GS Egan
    Nonlinear finite element analysis of general composite shell
    Masters, AFIT @ WPAFB, 1988.
  1526. GW Ehrenstein
    Grenzflachenenergetische Vorgange und Eigenspannungszustande in glasfaserverstarkten Kunststoffen
    [Interfacial energy and residual stress condition in glassfibre reinforced plastics]
    Dissertation, TH Hannover, 1968.
  1527. L Ehrnford
    Dental composites reinforced with microporous sintered glass fibre networks
    Fil.dr, Lunds-Sweden, 1983.
  1528. EML Ehrnrooth
    Softening and mechanical behaviour of single wood pulp fibres
    PhD, Helsinki-Finland, 1982.
  1529. RL Eidson
    Elastoplastic analysis of an arbitrary anisotropic laminated shell by the finite element method
    Masters, Tennessee TU, 1970.
  1530. G Einmahl
    Metal fibre reinforced glass composites.
    MS, California: Berkeley, 1966. UCRL-16844.
  1531. JW Eischen
    Fracture of nonhomogeneous materials.
    PhD, Stanford, 1986. DA8612732.
  1532. MO El-Alfy
    A scanning electron microscope study of fibre structure.
    Thesis, Bradford, April 1980. D35537/81.
  1533. L El-Aoufi
    Contributions a l'etude experimentale et numerique du comportement mecanique des materiaux anisotropies  [Experimental & numerical study of stress in anisotropic materials]
    Thesis, Grenoble, 1984.
  1534. B Elbirli
    Characterisation of effectiveness of surface treatments for glass fibres in composites
    PhD, Connecticut, 1978. DA7913010.
    >>> H El-Chedid, see FAC El-Helou.
  1535. BH Eldiwany
    Shape optimisation for minimal stress concentration.
    PhD, Houston, 1984. DA8428113.
  1536. CM Eldridge
    Analysis of an arbitrary sandwich shell
    Masters, Tennessee TU, 1969.
  1537. CM Eldridge
    Nonlinear analysis of orthotropic, laminated shells of revolution by the finite element method
    PhD, Tennessee TU, 1977. DA7814003.
  1538. Mohammed Z Elgamal
    Multiple scattering and beam scattering by arrays of isotropic and anisotropic cylinders
    PhD, Manitoba, 1988. DA0563882. DAIB 49(9)3916.
  1539. Mohamed El-Ghorba
    Etude de caracterisation des mechanismes d'endommagement en mode II dans un materiau composite fibres de verre-epoxyde par suivi d'emission acoustique
    [Mode II damage mechanisms in fibreglass/epoxy followed by AE]
    PhD, Sherbrooke, 1991. DA-0384433.
  1540. ZI Elgindi
    Kevlar-polycarbonate splint for the internal fixation of fractured bones
    Masters, Toronto, 1977.
  1541. AMA El-Habak
    Mechanical behaviour of GFRP composites under impact compressive load
    PhD, Cairo - Egypt, 1987.
  1542. N El-Haggar
    Theorie des plaques transversalement isotropes et des coques cylindriques
    [Theory of transversely isotropic plates and cylindrical shells]
    3eme cycle, Lille I, December 1982.
  1543. Fares Assia Chedid El-Helou
    A unified mathematical modelling of wave propagation in generally anisotropic media
    DEng, Cleveland SU, 1991. DA9131895. DAIB 52(5)2680.
  1544. Hany Amin El Kadi
    Analysis and failure of laminated fiber-reinforced composites
    PhD, University of Alberta (Canada), 1993.  AADNN88235  DAI55(7)2967
  1545. MA Elkins
    Mechanical characterisation and failure modes of fibre reinforced angle-ply composites
    PhD, NCSU Raleigh, 1984. DA8507364. N85-35234.
  1546. Rabeh Hosny Elleithy
    Damage and fracture in selected polymers and composites
    PhD, Case Western Reserve University, 1994.  AAD9501986  DAIB55(8)3524
  1547. PG Elliott
    Brightness temperature and propagation characteristics of plane layered media, with applications to ice and radomes.
    Masters, Massachusetts, 1983.
  1548. WG Elliott
    <principal strength tensors by sandwich beam method>
    MASc, Toronto, 1983.
  1549. DE Ellis
    The rotational transformation of elastic moduli for fibre-reinforced laminae
    Masters, TA&MU, 1969.
  1550. CD Ellis
    The fracture of carbon fibre reinforced plastics
    DPhil, Sussex, 1974. D18990/77.
  1551. G Ellis
    The application of optical fibre technology to the Raman spectroscopy of polymers
    MPhil, Southampton, 1988. ASLIB 38(2)3306.
  1552. Kelly Ellis
    Damping predictions of constrained layers with orthotropic face sheets using the modal strain energy method
    MS, Utah State University, 1995.
  1553. MS Ellison
    A system for characterisation of single fibre ultimate mechanical properties
    PhD, California: Davis, 1982. DA8227870.
  1554. Mark William Ellsworth
    Hybrid inorganic-organic composite materials:  new routes into "nonshrinking" sol-gel composites
    PhD, University of California, Berkley, 1993.  AAD9430463  DAIB55(7)2761
  1555. AR El-Lozy
    Thermal expansion behaviour of particle and fibre composite materials
    PhD, NCSU Raleigh, 1973. DA7329540.
  1556. LOA El-Marazki
    Creep in polyester and fibreglass reinforced polyester
    PhD, Wisconsin: Madison, 1981. DA8206829.
  1557. AA Elmeged
    Analysis of orthotropic plate system
    Masters, West Virginia, 1973.
  1558. JJ Elmendorp
    <shear force induced homogenisation in polymer blends>
    PhD, Delft UT, 1986.
  1559. YE-B El-Mogahzy
    A study of the nature of friction in fibrous materials
    PhD, NCSU, 1987. DA8804838.
  1560. AS Elnashai
    Nonlinear analysis of composite tubular joints.
    PhD, London: ICST&M, 1984.
  1561. Leila El-Sa'ad
    The reverse thermal effect in epoxy resins and moisture absorption in semi-interpenetrating networks
    PhD, Salford, March 1989. D86836. DAIB 50(10)4607. ASLIB 38(4)7575.
  1562. AK El-Senussi
    Interlaminar delamination in unidirectional carbon-epoxy composites induced by static and fatigue loading.
    PhD, Bristol, September 1986. D73294/87. ASLIB 37(1)1709.
  1563. MM El-Tayeby
    The stability characteristics of thin flat orthotropic paltes with circular holes
    PhD, CNAA: Paisley, June 1986. D69566/86. ASLIB 37(3)6051.
  1564. RN Elvin
    Properties of polypropylene/graphite fibre composites.
    MS, Washington University-MO, 1972.
  1565. Thomas Michael Ely
    Failure mechanism characterization in graphite/epoxy using acoustic emission data
    MS, Embry-Riddle Aeronautical University, 1993.  AAD1353831  MS32(1)260
  1566. Mohamad Samih El-Zein
    Strength in notched and impact-damaged laminates
    PhD, VPI&SU, 1989. DA9003589. DAIB 50(9)4083.
  1567. DM Elzey
    A uniaxial fatigue study of near unidirectional composite tubes for negative ratios
    Masters, RPI, 1984.
  1568. H Emadipour
    Mechanical characterisation of the interfacial strength of glass-reinforced composites
    Masters, CWRU, 1983.
  1569. GT Embley
    Cracks in anisotropic bodies in a state of generalized plane deformation
    Masters, Lehigh, 1968.
  1570. PC Emeanuwa
    Structure and properties of internal weld lines in injection moulded thermoplastics and short fibre reinforced composites
    PhD, Brunel, June 1987. D74591/87.
  1571. Pierre Richard Emeric
    Characterization of composite materials from temporal thermal response
    PhD, The College of William & Mary, 1995.  AADAAI9537553  DAB56(7)3959
  1572. JW Emery
    Data acquisition and control for multiple composite life tests
    Masters, NPS Monterey, 1988.
  1573. W Emmert
    Die Linienkonstante Rutschsicherheit [Direct path slippage limits]
    Diploma, IKV Aachen, 1977. D7754.
  1574. C Emslie
    An investigation into the production of low-loss optical fibres from organic polymers
    PhD, Southampton, April 1989. DX87361.
  1575. JA Enever
    Adhesion and toughness in carbon fibre reinforced plastic
    PhD, Loughborough UT, December 1973.
  1576. FC Eng
    Wave propagation in periodic lattice structures using a transfer matrix method
    Masters, MIT, 1984.
  1577. I Engelberg
    Transverse fracture of unidirectional glass fibre reinforced epoxy composites
    MSc, Hebrew Univ-Israel, 1973.
  1578. FR Engli
    Ultrasonic non-destructive examination of graphite/epoxy and glass/epoxy composite materials
    Masters, Toronto, 1985.
  1579. JB Enns
    The cure of thermosetting epoxy/amine systems
    PhD, Princeton, 1982. DA8221568. N83-13255.
  1580. R Ensio
    The cause of deconsolidation and its effects on mechanical properties of thermoplastic composites
    S.bl.1 thesis, MIT, 1984.
  1581. IA Equere
    Investigation into the degradation of the properties of boron/aluminium composite subjected to longtime exposure
    Masters, Tennessee @ Knoxville & Tullahoma, 1978.
  1582. AB Erdemir
    Fibres from aromatic copolyesters
    PhD, Leeds, December 1982.  D77541.
    >>> O Erenstedt, see U Bjorkerud
  1583. G Erhard
    Reibungs- und Verschliessverhalten von Polymerwerkstoffen
    [Friction and wear character of polymeric materials]
    Dissertation, Karlsruhe, 1980.
  1584. LL Erickson
    Supersonic flutter of sandwich panels:effect of face sheet bending, stiffness, rotary inertia and orthotropic core shear stiffnesses
    PhD, VPI&SU, 1971.
  1585. WA Ericson
    An investigation of initial yeild surfaces for unidirectional reinforced composites
    MS, NPS Monterey, March 1972. AD 745 176. N73-10572.
  1586. Brian Lee Erickson
    On the enhancement of adhesive bonding to polymer and composite surfaces through gas phase sulfonation
    MS, Michigan State University, 1993.  AAD1354866  MA32(3)1043
  1587. Ingvar Eriksson
    Bolted and notched composite laminates: analyses and experiments
    Tekn.dr, KTH Stockholm, 1989. DA-150284. DAIC 51(4)643.
  1588. Paolo Ermanni
    Die kombinierte Nasswickel- und Prepregbauweise- ein Verfahren zur Wirtschaftlichen Herstellung von CFK-Flugzeugrumpfstrukturen
    PhD #9339, ETH Zurich, 1990.
  1589. W Ermert
    Automatisierte Verarbeitung faserverstarkter Kunststoffe [Automatic fabrication of fibre reinforced plastics]
    Doctorate, IKV-RWTH Aachen, August 1983. DS8309.
  1590. L Erwin
    A new method for rapid moulding of thermoplastics
    PhD, MIT, September 1976.
  1591. RT Esfandi
    Adhesion phenomena of high performance thermoplastic/carbon fibre matrix composites
    Masters, PI Brooklyn, 1988.
  1592. Edward Jay Eshelman
    The design of a fiber glass chopper for use us variable length and direction controlled preforming processes
    MS, Michigan State University, 1995.  AADAAI1374957
  1593. H Eslami
    Nonlinear flutter and forced oscillations of rectangular symmetric cross-ply and orthotropic panels using harmonic balance and perturbation methods
    PhD, Old Dominion, 1987. DA8805576. DAIB 49(7)2813.
    >>> JJ de Espindola, see JJ De-Espindola.
  1594. B Esping
    Minimum weight design of membrane structures.
    Licentiate, KTH Stockholm, 1983. KTH-Report-83-1.
  1595. B Esping
    Structural optimisation using numerical techniques.
    Doctorate, KTH Stockholm, 1985. KTH-Report-85-8.
  1596. Horacio Dante Espinosa
    Micromechanics of the dyamic response of ceramics and ceramic composites
    PhD, Brown University, 1992.  AAD9308802  DAIB54(1)318
  1597. HA Espiritu
    The effect of stress concentration on the fatigue life of glass-filled polyester
    Masters, CSULB, 1979.
    >>> EU Espuche, see E Urbaczewski-Espuche
  1598. TC Esselman
    An experimental study of the fracture properties of composite materials
    Masters, CWRU, 1971.
  1599. CD Estes
    Deformation and fracture of boron fibre-aluminium composites
    Masters, MIT, 1966.
  1600. RC Estes
    Temperature distribution in an orthotropic rectangular composite
    Masters, New Mexico, 1972.
  1601. Paisan Etitum
    Stability analysis of laminated composite cylinders
    PhD, University of California - Los Angeles, 1993.  AAD9420477  DAIB55(3)1060
  1602. ML Evans
    Investigation of vacuum effects on the mechanical property of composite materials
    PhD, VPI&SU, 1973.
  1603. MS Evans
    Fatigue of reinforced rubbers under severe conditions.
    PhD, London, 1975. D5684/76.
  1604. DO Evans
    Filament winding simulation
    Masters, Brigham Young, 1985.
  1605. PD Evans
    <scratch hardness for evaluation of cure temperature>
    PhD, London: ICST&M, 1987.
  1606. SJ Evans
    The thermal degradation of polyester thermosets
    PhD, CNAA: Kingston (Appl.Chem), May 1989. DX87718.
  1607. Patricia Ann Evans
    Indentification and analysis of manufacturing process data relationships:  investigation and demonstration
    PhD, Ohio State University, 1994.  AAD9420951  DAIB55(3)1112
  1608. EC Eveno
    Experimental investigation of resistance and ultrasonic welding of graphite reinforced polyetheretherketone composites
    MS, Delaware, 1988.
  1609. AT Eventoff
    Lateral deflection analysis of a rotating composite disc
    Masters, Villanova, 1981.
  1610. EB Everatt
    Applications of the theory of ideal fibre-reinforced materials
    MPhil, Nottingham, 1973!.
  1611. HS Ezzard
    A study of the failure of joints in composite material fuel cells due to hydraulic ram loading
    Masters, NPS Monterey, 1976.
  1612. TD Fadale
    Mathematical techniques for the mechanical characterisation of composite materials
    Masters, University of Washington-WA, 1987.
  1613. TN Faddis
    The development of a pseudohomogeneous three-dimensional composite material
    DEngr, Kansas, 1972. DA7232860.
  1614. LE Faeth
    Thermorheological analysis of polyester cure kinetics.
    Masters, MIT, 1980.
  1615. LE Faeth
    Rheology of an epoxy network forming system.
    Masters, MIT, 1984.
  1616. DT Fagan
    Electrochemical and thermal desorption analysis of glassy carbon and carbon fibre surfaces
    PhD, Ohio SU, 1987. DA8804035.
  1617. A Fages
    Principes variationnels mixtes en dynamique vibratoire. Application aux structures homogenes et sandwiches
    [Mixed variational principles in dynamic vibration-application to homogeneous and sandwich structures]
    DEtat, Paris VI, June 1984.
  1618. Maureen Theresa Fahey
    Nonlinear and anisotropic behavior of high performance fibers
    ScD, Massachusetts Institute of Technology, 1993.  AAD0574488  DAIB55(2)548
  1619. AH Fairfull
    Scaling effects in the energy absorption of axially crushed composite tube
    PhD, Liverpool, September 1986. D75364/87. ASLIB 37(4)8270.
  1620. JA Faist
    A new four-part vector network analyser and polyimide as a microstrip dielectric
    Masters, Cornell, 1987.
  1621. A Falcone
    Liquid crystalline polymers as composite matrix materials
    MS, RPI, 1986.
  1622. SC Fan
    Processing of polyacrylonitrile (PAN)-based fibres to carbon fibres
    PhD, MIT, 1986.
  1623. Cun Feng Fan
    A spectroscopic study of discontinuous [polydiacetylene] fibre composites
    PhD, Massachusetts, 1991. DA9120875. DAIB 52(4)2064.
  1624. GP Fang
    Moisture and temperature effects in composite materials
    MSc, TA&MU, 1986.
  1625. P Fang
    An evaluation of the mechanical properties of silicon carbide yarns
    Masters, Drexel IT, 1986.
  1626. Chin Fang
    Design of composite laminates by a Monte Carlo method
    PhD, Stanford Unversity, 1992.  AAD9302203  DAIB53(9)4902
  1627. JP Fanucci
    Damage initiation and propogation during compression fatigue of flawed graphite/epoxy composites
    PhD, MIT, September 1980
  1628. M Farhadinia
    Effect of sand particle size on fracture toughness of sand/polyester composite
    Masters, Missouri-Rolla, 1985.
  1629. Mahmood Farhadinia
    Finite element analysis and experimental evaluation of buckling phenomena in laminated composite tubes and plates
    PhD, Missouri-Rolla, 1992. DA9224667. DAIB 53(4)2021.
    >>> MB Farhat, see M Ben-Farhat.
  1630. Alamgir Farouk
    Processing and properties of PMR15 composites
    PhD, Rutgers SUNJ New Brunswick, 1991. DA9213964. DAIB 52(12)6617.
  1631. Y Farra
    Investigation of the flexural properties of slurry-infiltrated fibre reinforced polymer concrete
    Masters, Texas @ Austin, 1988.
  1632. NR Farrar
    Water damage in epoxy resins, composites and adhesives.
    PhD, Bristol, 1978.
  1633. EA Farraye
    Computational investigation of transient heat conduction in composite structures
    Masters, Delaware, 1985.
  1634. JBJ Farrell
    Mechanical fatigue and other physical properties of carbon fibre filled poly(butylene terephthalate)
    Thesis, Dublin: Trinity, 1982-83.
  1635. IR Farrow
    Damage accumulation and degradation of composite laminates under aircraft service loading: assessment and prediction
    PhD, Cranfield IT, 1989. In 2 volumes. DX90938. DAIB 51(8)3950.
  1636. Jalaleddin Farsa
    Development of a differential quadrature technique for fundamental frequency analysis of tapered, orthotropic, anisotropic and laminated thin plates
    PhD, Oklahoma, 1991. DA9208396. DAIB 52(10)5418.
  1637. AB Fasina
    Formation, structure and physical properties of polyester networks
    PhD, UMIST, October 1975. D47274/83.
  1638. T Fassbender
    Optische Online-Qualitatskontrolle von Fasergewebe auf einem parallelverarbeitenden Bildauswertesystem [Optical online QC of textiles with parallel processing computer]
    Diploma, IKV Aachen, 1987.
  1639. PR Father
    Failure criteria evaluation using thin-walled composite tubes
    Masters, RPI, 1984.
  1640. KA Faughnan
    Determination of residual stresses in boron-carbon and boron-tungsten filaments and their effect upon tensile strength.
    Masters, Virginia, 1972.
  1641. JA Favenesi
    Mixed-mode crack propagation in an orthotropic material using finite element analysis
    Masters, Alabama @ Huntsville, 1986.
  1642. SA Fawaz
    Compressive properties of high performance polymeric fibres
    Masters, AFIT @ WPAFB, 1988.
  1643. Z Fawuz
    Une nouvelle methode pour predire la rupture en fatigue des materiaux composites
    [Novel prediction method for fatigue strength of composites]
    Masters, Sherbrooke, 1988.
  1644. S Faza
    Bending and bond behaviour and design of concrete beams reinforced with fibre reinforced plastics rebars
    PhD, West Virginia, 1991.
  1645. AC Fazey
    The mechanical anisotropy of fibre reinforced materials.
    MSc, UMIST, 1971!.
  1646. O Federico
    Thickening of polyester resin
    Masters, Connecticut, 1982.
  1647. Olimpia Federico
    In-situ composites of a thermotropic liquid crystalline polymer and polycarbonate: processing, morphology and properties
    PhD, Massachussets, 1989. DA8917346. DAIB 50(5)1968.
  1648. Pascal Feillard
    Micromechanical study of the interface and the elementary damage phenomena in model composites of glass/epoxy
    Contribution a l'etude micromecanique de l'interface et des phenomenes elementaires d'endommagement dans des composites modeles fibres de verre/resine epoxyde
    Institut National des Sciences Appliques de Lyon, 1993.   AADC347823  DAIC55(2)661
  1649. KS Feinberg-Ringel
    Quantitative fractographic analysis of Al2O3-aluminium-2.5%lithium metal matrix composite
    Masters, Georgia IT, 1988.
  1650. Larry Allen Fellows
    Microwave processing of polyimides and polyimide composites
    MS, Michigan SU, 1991. MA1346977. MA 30(3)810.
  1651. W-H Feng
    Structural behaviour of layered composites of nonlinear materials
    PhD, Purdue, 1978. DA7821445.
  1652. C-R Feng
    Dislocation density and high temperature creep of aluminium alloys and fracture of silicon carbide-aluminium composites
    PhD, Maryland-College Park, 1987. DA8808546.
  1653. An Kou Feng
    Stress fracture criteria for laminated composites
    MS, California State University, 1995.  AADAAI1362274  MS33(6)1953.
    >>> Feng Ming, see F Ming
  1654. F Ferber
    Bruchmechanische Analyse der Entstehung und Ausbreitung von Matrix- und Grenzflaechenrissen in Thermisch Belasteten Faserverbundwerkstoffmodellen [Fracture mechanics analysis of the initiation and propagation of matrix and interface cracks in thermally loaded fibre composite models]
    Doctorate, Gesamthochschule Paderborn FRG, 1986. In German. ETN-87-90439. N88-10400.
  1655. Suzanne Marie Ferguson
    The detection of damage induced acoustic emission in advanced composite materials using embedded optical fibre sensors
    MASc, Toronto, 1990. MM-58313. MA 30(3)779.
  1656. S Feridoonian
    An investigation of the electrical properties of stainless steel fibre-filled polypropylene composites.
    MPhil, Brunel, 1986. ASLIB 36(2)3100.
  1657. James Hector Fernandes
    A water based manufacturing method for two phase matrix composite materials
    MS, Michigan State University, 1994.  AADAAI1359782  MA33(3)943
  1658. G Fernando
    <moisture sorption in epoxy resin>
    PhD, Bath, 1986.
  1659. RE Ferrans
    The measurement of Poissons ratio of fibres
    MScTech, Manchester, 1957.
  1660. James Anthony Ferrara
    Manifestations of crystallization in the processing of high-performance thermoplastic composites
    PhD, University of Washington, 1994.  AAD9434309  DAIB55(8)3445
  1661. JE Ferrier
    The theoretical mechanics of fibre reinforced materials.
    PhD, Nottingham, 1972!.
  1662. RL Ferris
    Low energy impact loading of graphite-epoxy plates
    MS, NPS Monterey, December 1976. N77-25263. AD A035 890.
  1663. JP Ferte
    Dilatation thermique des materiaux composites a matrice metallique: analysis experimentale et interpretation theorique
    PhD, Claude Bernard (Lyon), 21 June 1974.
  1664. RC Fews
    The analysis and design of filament wound pressure vessels.
    PhD, Cranfield IT, 1978. D7948/79.
  1665. S Fidan
    The experimentation and analysis of compression test methods for single high performance fibres
    MS, AFIT @ WPAFB, 1988. AFIT-GAE-AA-88D-14.
  1666. FR Field
    Application of multi-attribute utility analysis to problems in materials selection
    Doctorate, MIT, 1985.
  1667. RE Fields
    Nondestructive inspection of load induced damage in fibre reinforced PPS
    Masters, VPI&SU, 1983.
  1668. Andrzej Jozef Figiel
    Analiza Procesow pekania laminatow poliestrowo-szklanych w warunkach obciazenia dlugotrwalego i srodowiska korozyjnego
    [Fracture mechanics of glass reinforced plastics under long term loading and corrosive environment]
    DrSc, Politechnika Wroclawska, 1988. DA-C140112. DAIC 51(3)481.
  1669. JD Filho
    Composite material connecting rod for two cycle gasoline engine
    Masters, RPI, 1978.
  1670. JEA Filho: see JE Abdalla Filho
  1671. ME Fillery
    The development of microstructure in carbon fibres
    PhD, Surrey, 1976. D17850/76.
  1672. James Nick Fillon
    Delamination buckling loads analysis for unsymmetric composite laminates
    MS, California State University Long Beach, 1992.  AAD1349537  MA31(1)356
  1673. DC Finch
    The buckling of symmetric and unsymmetric composite plates with various boundary conditions
    SM, MIT, February 1984.
  1674. D Finello
    Interfacial behaviour of graphite/aluminium composites.
    PhD, Texas, August 1982. DA8227749.
  1675. JK Fink
    Beitrage zur kinetik der homogenen und inhomogenen Polymerisation in vernetzenden Systemen
    [Study of kinetics of crosslinking systems of homogeneous and inhomogeneous polymerisation]
    Dr.rer.nat, Wien, 1978.
  1676. BK Fink
    Characterising thermal/mechanical properties of filament wound composites
    Masters, Nebraska, 1986. Army Military Personnel Center-Alexandria, 15 Jan 1987. AD A176238.
  1677. Bruce Kendall Fink
    Heating of continuous carbon-fibre thermoplastic-matrix composites by magnetic induction
    PhD, Delaware, 1991. DA9223642. DAIB 53(4)2008.
  1678. HL Finkel
    New triangular finite element for fibre reinforced composite plates
    Masters, TA&MU, 1985.
  1679. Layne W Finlinson
    Analysis of lap joints for chevron-segmented fibrous damping composites
    MSE, Utah State University, 1994.  AAD1356999  MA32(5)1460
  1680. Scott R Finn
    Delaminations in composite plates under transverse static or impact loads
    PhD, Stanford, 1991. DA9122532. DAIB 52(3)1563.
  1681. Mark Christopher Finzel
    Bulk-phase kinetics and physical properties of epoxy/amine systems
    PhD, Michigan SU, 1991. DA9134119. DAIB 52(6)3174.
  1682. L Fiore
    <analogy between failure under monotonic and dynamic fatigue loads>
    Doctorat, ECL Lyon, 1988.
  1683. G Fischer
    Versuche uber die wirkung von kerben an elastisch beanspruchten biegestaben
    [Experiment on notching effect on elastic associated stress]
    Dissertation, TH Aachen, 1971.
  1684. S Fischer
    The flexural behaviour of aramid fibre composite material and their hybrids
    PhD, Hebrew Univ-Jerusalem, 1986. In Hebrew.
  1685. F Fischer
    The basis for a design-for-manufacture methodology pertaining to the fabrication of a GE P50 robot forearm in a composite material
    Studienarbeit, RWTH Aachen/Michigan SU, 1987.
  1686. PR Fisette
    An analysis of structural finger joints made from three North-eastern species
    Masters, Massachusetts, 1986.
  1687. JC Fish
    Tensile strength of composite structures with internal ply drops and free-edge effects
    PhD, Maryland College Park, 1988. DA8818395. DAIB 49(7)2734.
  1688. CM Fisher
    Chemical modifications of organic functional groups to reduce the moisture sensitivity of cured MY720/DDS epoxy resins.
    PhD, NCSU Raleigh, 1985. DA8518237.
  1689. JM Fisher
    A study of failure characteristics of a thermoplastic composite material at high temperatures
    Masters, AFIT @ WPAFB, 1988.
  1690. Gregory Scott Fisher
    The effect of interphase properties on adhesion in polyphenylene sulfide/carbon fiber composites
    PhD, Michigan State University, 1994.  AADAAI9512048  DAB55(12)5455
  1691. JM Fitzrandolph
    Acoustic emission characterisation of the fracture process in a boron epoxy composite
    MS thesis 3395, UCLA Engineering, 1971.
  1692. W Fix
    Beitrag zur erfassung von alterungkennsgrossen fur die bemess ung von kunststoff bauteilen unter besonderer berucksichtigung der UV-strahlung [Contribution to realisation of full ageing character by the monitoring of structural plastic elements with special attention toultraviolet light]
    Dissertation, RWTH Aachen, 1981.
  1693. DL Flaggs
    Elastic stability of generally laminated composite plates including hygrothermal effects
    MMAE, Delaware, June 1978.
  1694. GV Flanagan
    Development and application of optimisation techniques for composite laminates
    Masters, AFIT @ WPAFB, September 1983. AFIT/GAE/AA/83S-4. AD A135 832. N84-18330.
  1695. EH Fleischman
    An investigation of the elastic and dielectric anisotropy of paper
    Doctorate, Inst.Paper Chemistry - Appleton WI, 1981.
  1696. Sean Michael Fleming
    A material characterization of a silicon carbide whisker-reinforced aluminum metal-matrix composite, with an emphasis on cyclic-bending
    MS, Michigan State University, 1993.  AAD1356324  MA32(5)1410
  1697. O Flint
    Copper plated carbon fibres
    PhD, London: City, 1971!.
  1698. JE Flitcroft
    The non-destructive testing of glass and carbon fibre reinforced plastics
    PhD, Bristol, 1977.
  1699. Y Flom
    Fracture toughness of Si/C composites
    PhD, Maryland, 1987. DA8725504.
  1700. JE Flood
    A kinematic approach to the formation and characterisation of biaxially oriented poly(p-phenylene terephthalamide)
    PhD, Tennessee, 1985. DA8600021.
  1701. J Florio
    Blistering in reinforced polyester resins
    Masters, Rhode Island, 1986.
  1702. John Florio
    An analytical and experimental investigation of the decomposition of glass-filled polymer composites
    PhD, Rhode Island, 1989. DA9008840. DAIB 50(11)5272.
  1703. PJ Floros
    On the development of a highly damped composite material for automotive applications
    Masters, Toronto, 1986.
  1704. DL Flynn
    Ductile fibre composites: an engineeringly viable metal matrix composite
    Masters, CWRU, 1974.
  1705. PL Flynn
    An analytic method for predicting the flow and fracture in notched fibre composite materials
    PhD, CWRU, 1975. DA7616042.
  1706. JF Fogarty
    Behaviour of concrete beams post-tensioned with glass fibre reinforced plastic tendons
    Masters, NCSU, 1986.
  1707. BL Foist
    Aeroelastic stability of aircraft with advanced composite wings
    MS, Purdue, August 1982.
  1708. WC Fok
    Post-buckling behaviour of plates with discontinuous change of thickness
    PhD, Strathclyde, 1975.
  1709. AG Foley
    The mechanical properties of aluminium and copper coated carbon fibres
    PhD, London, 1979. D28319/79.
  1710. GE Foley
    Fatigue characterisation of composites
    Masters, Lowell, 1981.
  1711. Michael Francis Foley
    Techno-economic synthesis of a cost effective composite manufacturing process (manufacturing, flexible Resin Transfer Molding)
    PhD, Massachusetts Institute of Technology, 1992.  AAD0385020   AAD0572718  DAIB 54(2)1030
  1712. F Folgar-Portillo
    Fibre orientation distribution in concentrated suspensions: a predictive model
    PhD, UIUC, 1982.
  1713. G Fonblanc
    Mousses syntactiques, materiaux composites pour grandes profondeurs
    [Syntactic foams - composite materials for large structures]
    DIng, Bordeaux I, March 1986. No.382.
  1714. PTJ Fong
    On the nonlinear theory of bending and buckling of shallow spherical sandwich shell
    Masters, Tennessee TU, 1969.
  1715. C Fong
    Effect of starch oil finish on the fracture toughness of glass fibre reinforced composites
    Masters, MIT, 1975.
  1716. Lihwa Fong
    Analysis of fiber mat preforming in liquid composite molding
    PhD, Ohio State University, 1992.  AAD9307752  DAIB53(11)5934
  1717. RW Fontaine
    An assessment of weft and multiaxial inserted warp knits
    Masters, NCSU Raleigh, 1987.
  1718. MF Forbes
    Ultrasonic characterisation of layered composite systems
    PhD, Inst.Paper Chemistry, 1986. DA8722621.
  1719. EF Ford
    Stress analysis of a broken fibre imbedded in an elastic medium
    PhD, Harvard, 1973.
  1720. BA Ford
    <strength and fracture toughness of SiC/pyrex composites>
    PhD, Bath, 1987.
  1721. Stephen Montgomery Forehand
    Composite plate buckling investigation using REDUCE
    MS, Texas @ Arlington, 1988.  MA1336171.  MA27(3)409.
  1722. Raquel Barber Fornes
    Sandwich techniques in flow injection analysis
    Tecnicas sandwich en analisis por inyeccion en flujo
    Universitat Autonoma de Barcelona - Spain, 1993.  AADC397472  DAIC56(1)221
  1723. R Forster
    Festigkeitsrechnung und festigkeitsoptimierung an mehrschichten verbunden aus Glaserfaser/kunststoff
    [Calculation and optimisation of strength in multilayered glassfibre plastics]
    Dissertation, TH Darmstadt, 1971.
  1724. NL Fortenberry
    Fatigue of seawater saturated fibre composites.
    Masters, MIT, 1984.
  1725. Bryan Hicks Fortson
    Damage processes and fracture surface morphology in laminated composites
    PhD, Georgia IT, 1990. DA9105431. DAIB 51(9)4463.
  1726. Philippe Fosso
    In situ study of glass fiber-reinforced organic matrix composites' materials damage using x-ray computed tomography
    Dr, Ecole Centrale des Arts et Manufactures, 1992.  AADC287296  DAIC54(2)582
  1727. R Foster
    The effect of core density and thickness on the ballistic impact performance of GRP/polyurethane foam/GRP sandwich structures
    MSc, Lancaster, 1980.
  1728. LJR Foster
    The degradation of gel-spun poly (beta-hydroxybutyrate) fibrous matrix
    University of Aston in Birmingham, 1992.  AADC336196  DAIC55(1)194
  1729. A Foudget
    Methodes de caracterisation de materiaux anisotropes- application au bois
    [Methods for characterisation of anisotropic materials- wood]
    DIng, INSA Lyon, 1980.
  1730. D Fouillou
    Fatigue crack propagation in unidirectional PEEK composite
    MSc, Cranfield IT, 1988.
  1731. DM Foulkes
    Pipe-flange joints in GRP
    MSc, London: ICST&M, September 1983.
  1732. MS Found
    Biaxial stress fatigue of glass reinforced plastics
    PhD, Nottingham, May 1972.
  1733. R Fountain
    The study of adhesive bonding of hydrosilation-cured RTV silicones to materials that cause their inhibition
    DSc, Washington University-MO, 1973.
  1734. P Fournier
    <time-temperature dependence of the ultimate stress and strain>
    DEA, Claude Bernard/ECL Lyon, 1988.
  1735. DR Fowler
    The compressive behaviour of three-phase composite tubes.
    DPhil, Sussex, 1972. D20707/77.
  1736. JR Fowler
    Parameters involved in the adhesion of carbon fibre composites
    PhD, CNAA: Leicester, 1978.
  1737. SW Fowser
    The behaviour of orthogonal fabric composites
    Masters, Delaware, 1986.
  1738. SW Fowser
    Boundary integral modelling of fibre-crack interactions
    PhD, Delaware, 1988.
  1739. MAO Fox and RL Hewitt
    Damping properties of carbon fibre reinforced plastics
    BSc, Bristol, 1968.
  1740. TJ Fox
    Ageing in closed-cell phenolic foam
    Masters, MIT, 1986.
  1741. FG Fox
    Static compression test of single ply composites
    BS(MSE), Utah, June 1989.
  1742. Bruce Robert Fox
    An analysis of bolted joints in fibrous composite material
    MS, CSULB, 1990. MA1342804. MA29(3)484.
  1743. JV Foy
    Electrical properties of exfoliated graphite filled polyester based composites
    Masters, Pittsburgh, 1989.
  1744. JA Frailey
    Matrix cracking and bending stiffness reduction in composite laminates
    Masters, TA&MU, 1988.
  1745. RI Frame
    Electrical & thermal behaviour in films of resin/graphite mixtures
    PhD, Strathclyde, 1982. Restricted access.
  1746. CN France
    Some morphological aspects of polyolefins [fibres]
    PhD, Southampton, February 1988. D82613.
  1747. Nicholas Donald Francis
    Heat and mass transfer in a semi-porous textile composite
    PhD, Georgia Institute of Technology, 1994.  AAD9421058  DAIB55(3)1111
  1748. G Frantziskonis
    Progressive damage and constitutive behaviour of geomaterials including analysis and implementation
    Doctorate, Arizona-Tucson, 1986.
  1749. HR Fraser
    Bifurcation type buckling of generally orthotropic plates
    PhD, UIUC, 1968. DA6901344.
  1750. DI Freed
    The strength and stiffness of graphite/epoxy composites made from patchwork prepreg layers
    BSME, MIT, 1983.
  1751. Ricardo Satuf Freire
    Short fiber composites with high electrical and thermal conductivity
    MS, University of Arizona, 1992.  AAD1351320  MA31(3)1348
  1752. Mark Andrew French
    Environmental degradation and stress corrosion of hybrid fibre composites
    PhD, CNAA: Kingston (Appl.Chem), Mar 1990. DX90916. DAIB 51(8)4007.
  1753. Burkhard Friedrichs
    Modeling of three-dimensional flow fields in injection and resin transfer molding processes
    PhD, University of Delaware, 1993.  AAD9319103 DAIB54(3)1617
  1754. DW Fritz
    The photoelastic coating method applied to the stress analysis of wood
    Masters, Oregon SU, 1967.
  1755. PJ Fritz
    On residual stresses and stress intensity factors in composite materials
    PhD, Pennsylvania SU, 1984. DA8429079.
  1756. GA Fritz
    Image analysis of fibre orientn in short fibre composite material
    MS, SUNY Buffalo, 1988.
  1757. WE Fritzsche
    Darstellung der Mittel zur Verbesserung der Zuverlaessigkeit von extrem leichten Bauten mit besonderer Beruecksichtigung von Textilverbundbauten des luftgetragenen Typs
    Dissertation Promotionsordnung B, TH Leipzig, 1986.
  1758. W Frohs
    <heat treatment effects on carbon fibres>
    PhD, Karlsruhe, in preparation at 1984.
  1759. Thomas Harris Fronk
    Fully-coupled fluid-structure analysis of a baffled rectangular orthotropic plate using the boundary element and finite element methods
    PhD, VPI&SU, 1991. DA9200416. DAIB 52(7)3855.
  1760. CJ Frushon
    On the buckling of sandwich beams containing an unbonded region
    Masters, Texas @ Austin, 1986. AFIT, May 1986. AFIT/CI-NR-86-185T. AD A173 603. N87-16362
  1761. DE Frye
    The computation of mechanical and thermal properties of composite laminates
    Masters, Tennessee, 1969.
  1762. LJ Fu
    The interfacial characterisation of discontinuous silicon-carbide and continuous graphite fibre reinforced aluminium composites
    Masters, Texas @ Austin, 1983.
  1763. Liang Fu
    A study on the electrical properties of heterogeneous materials
    PhD, Catholic UA, 1991. DA9123110. DAIB 52(3)1522.
  1764. Lei Fu
    Response and failure of thick composite rings subjected to uniform external hydrostatic  pressure or radial contraction
    PhD, University of Michigan, 1994.  AAD9423183  DAIB55(4)1528
  1765. EA Fuchs
    Investigation of static & dynamic fracture of orthotropic media by photomechanics
    PhD, Wisconsin: Madison, 1983. DA8317024. N84-15625.
  1766. John Peter Fuchs
    Numerical and experimental investigation of the bending response of thin-walled composite cylinders
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9403851   DAIB54(8)4240
  1767. JP Fuehne
    A shear deformable doubly-curved finite element for the analysis of laminated composite structures
    Masters, TA&MU, 1988.
  1768. Joseph Patrick Fuehne
    A finite element method including transverse stresses for thick laminated plates and shells
    PhD, TA&MU, 1990. DA9118225. DAIB 52(4)2254.
  1769. Ibtisam M Fugate
    Extension of orthotropic plate theory to stiffened shells
    DSc, George Washington U, 1989. DA9008130. DAIB 50(10)4661.
  1770. RR Fujczak
    Torsional fatigue behaviour of graphite-epoxy cylinders.
    MS, RPI/Watervliet Arsenal(NY), March 1974. WVT-TR-74006. N74-26066. AD 776 328.
  1771. WT Fujimoto
    Design of a composite wing spar
    MS, Washington University-MO, 1972.
  1772. M Fujiwara
    Resin-fibre load transfer in fibre-reinforced plastics.
    Masters, MIT, 1967.
  1773. H Fukunaga
    <hardening of carbon composite>
    PhD, Tokyo, 1979. In Japanese.
  1774. M Fukutani
    Behaviour of fibre reinforced composites after initial fracture
    Graduate thesis, Kyushu Univ.-Japan, 1983.
  1775. RT Fuller
    A broad-line NMR investigation of water absorbed by cured epoxy resin graphite fibre composite materials
    MS, NCSU, 1980. N81-25146.
  1776. PD Funkenbusch
    The fabrication, microstructure and strengthening behaviour of heavily cold-worked in-situ composites
    PhD, Michigan TU, 1984. DA8503817.
  1777. KM Furnes
    Bolted connections in composite shafts
    Masters, RPI, August 1983.
  1778. KE Fusch
    Deformation and fracture of a metal matrix composite model
    Masters, MIT, 1968.
  1779. John Peter Fushs
    Numerical and experimental Investigation of the bending response of thin-walled composite cylinders
    PhD, Virginia Polytechnic, 1993.  AAD9403851  DAB54(8)3240.
  1780. M Fuwa
    Acoustic emission studies of fracture processes in carbon-fibre composites
    PhD, Sussex, September 1974. D20386/77.
  1781. JA Fyie
    Sandwich panel with vertically aligned fibre core
    Masters, Washington SU, 1977.
  1782. IAE Gaafar
    Tear propagation behaviour in structural nets and coated fabrics
    PhD, Bath, 1981.
  1783. Patricia H Gabori
    A reactive plasticizer approach to enhancing the fabrication of fiber-reinforced thermoplastic composites
    PhD, University of Akron, 1994.  AAD9425874  DAIB55(4)1458
  1784. CA Gabriel
    Processing and properties of composite fibres of poly(p-phenylene benzobisthiazole) and poly(ether ether ketone) or nylon 6,6
    PhD, Massachusetts, 1987. DA8805919.
  1785. Frank David Gac
    Synthesis and characterisation of VLS SiC whisker reinforced reaction-bonded SiN
    PhD, University of Washington, 1989. DA9000235. DAIB 50(8)3643.
  1786. KP Gadkaree
    Prediction and measurement of the durability and reliability of elastomeric biomaterials
    DSc, Washington University-MO, 1980.
  1787. RL Gadodia
    Influence of operating variables on product morphology and product properties for injection moulding of reinforced and unreinforced polymer
    Masters, Stevens IT, 1981.
  1788. SK Gaggar
    Cyclic fatigue of epoxy and polyester resins
    Masters, Illinois IT, 1971.
  1789. SK Gaggar
    Strength and fracture properties of random glass fibre composites
    PhD, Illinois IT, 1974. DA7423978. N75-13033.
  1790. P Gagnaire
    <laser diffraction pattern of carbon fibres>
    These, Bordeaux, 1985.
  1791. Genevieve Gagnon
    Caracterisation microstructurale el mecanique d'un composite a matrice metallique a base d'aluminium
    MScA, Ecole Polytechnique, Montreal, 1991.  AADMM72779  MA31(2)903
  1792. M El-N A Gaheen
    Static and dynamic finite element analysis of pneumatic tyres including anisotropic and non-linear effects
    PhD, Cranfield IT, 1987. DX80837. ASLIB 38(2)4420.
  1793. SCP Galea
    Effect of temperature and vibration on acoustically-induced strains and damage propagation in CFRP plates
    PhD, Southampton, June 1989. DX89581.
  1794. Jay M Galbraith
    Interfacial shear behavior and its influence on fiber damage in sapphire-reinforced gamma titanium aluminide composites
    PhD, Pennsylvania State University, 1993.  AAD9326851  DAIB54(6)3285
  1795. C Galiotis
    Disubstituted polydiacetylene single crystal fibres.
    PhD, London: QMC, 1982.
  1796. NB Gallagher
    Monomer solution processed polyimide matrix composites
    Masters, University of Washington-WA, 1987.
  1797. Willard Mark Truman Gallerneault
    Particle reinforcement distributions and solidification structures in directionally solidified metal matrix composites
    PhD, Queens University-Kingston, 1992. DA-571380. DAIB 53(1)528.
  1798. RL Gallo
    Approximate analysis of failure within composite laminated plates considering edge effect, variable loading and temperature.
    Masters, AFIT WPAFB, 1979.
  1799. J Galy
    Mechanism of the reaction between an epoxy prepolymer and a cyanoguanidine curing agent
    De, INSA/Lyon, no date (1984!).
  1800. Mary Lee Gambone
    The fiber strength distribution and its effect on the creep behavior of a silicon carbide/titanium-1100 composite
    PhD, University of Virginia, 1995.  AADAAI9525048  DAB56(4)2259
  1801. E Ganani
    Transient flow viscometry of polymeric fluids and the rheology of short fibre suspensions
    DSc, Washington University-MO, 1984. DA8524759.
  1802. Athanassios Ganas
    Three-dimensional deformation of a statistically homogeneous anisotropic material at high strains, by formation of extensional ductile shears
    MSc, Carleton, 1990. MA664278. MA-M59060. MA 29(2)251. MA 30(2)363.
  1803. HL Ganczakowski
    Aspects of the mechanical properties of KFRP laminates
    PhD, Cambridge, November 1987. D59830. ASLIB 37(3)6031.
  1804. GV Gandhe
    Impact response of interleaved composite materials
    Masters, VPI&SU, December 1988.
  1805. RP Gangloff
    Elevated temperature tensile and creep behaviour of unidirectionally solidified Ni-Ni3Nb eutectic composites
    Masters, Lehigh, 1972.
  1806. AK Ganguli
    The load extension properties of bonded fibre fabrics.
    MSc, Leeds, 1966!.
  1807. Ranjan Ganguli
    Aeroelastic optimization of advanced geometry and composite helicopter rotors
    PhD, University of Maryland, 1994.  AADAAI9514522  DAB56(1)360
  1808. BW Gantt
    The thermoplastic coating of carbon fibres
    Masters, Clemson, 1987.
  1809. Peiliang Gao
    The effect of delamination on the dynamic response of composite laminates as measured by embedded fiber optic Michelson sensor
    MASc, University of Toronto, 1993.  AADMM83534  MA32(3)1048
  1810. Hong Gao
    Dynamic mechanical analysis of wood and wood-based composites
    PhD, Oregon State University, 1994.  AADAAI9517797  DAB56(1)21
  1811. G Gaonkar
    Plane stress fields due to isolated and multirows of inclusions
    DSc, Washington University-MO, 1967.
  1812. DP Garber
    Elastic properties and fracture behaviour of graphite/polyimide composites at extreme temperatures
    Masters, VPI&SU, 1983.
  1813. JI Garcia
    Experimental investigation of the splitting mechanism of unidirectional graphite epoxy materials
    Thesis, MIT, May 1979.
  1814. C Garcia-Franco
    Non-Newtonian suspension behaviour due to flow disturbance inertial effects
    DSc, Washington University-MO, 1977.
  1815. Rafael Garcia-Ramirez
    Structure and orientation behavior of highly oriented polymers under tensile and compressive stresses
    PhD, University of Akron, 1994.  AAD9425865  DAIB55(4)1458
  1816. JI Garcia-Rojas
    Static tensile behaviour of [0']6,[0/#5']s,[0/10']s and [0/15']s graphite epoxy laminates with holes
    S.M, MIT, 1980. TELAC-Report-80-7.
  1817. Christopher Alan Gardini
    Elevated tempearture and stress ratio effects on the fatigue crack growth of aramid reinforced aluminium laminates
    MSE, Florida Atlantic, 1990. MA1342343. MA 29(2)312.
  1818. GWP Gardner
    The effects of organic liquids on the friction and wear properties of nylon-6 & glass reinforced nylon
    BE, Sydney-Australia, November 1983.
  1819. E Garibay
    An improved characterisation of the multiaxial fracture strength of ECGR-type AGOT graphite
    MS, Kansas SU, 1983.
  1820. Jean-Francois Garneau
    Fabrication of a silicon carbide/6061 composite and characterisation of the mechanical properties
    Fabrication d'un composite silicon carbide/6061 et caracterisation de ses proprietes mecaniques
    MSc, Universite Laval - Canada, 1993.  AADMM82490  MA32(2)712
  1821. Gil Bernard Garnier
    Cellulose fiber-reinforced thermoplastic composites:  surface and adhesion characterization
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9402329  DAIB54(9)4867
  1822. M Garra
    <phase transfer catalytic oxidation of carbon fibre surfaces>
    MSc, Hebrew University - Israel, 1990.
  1823. SS Gassel
    The dynamic response of spinning cross-ply laminated circular cylindrical shells
    PhD, Wisconsin: Madison, 1976. DA7610659.
  1824. TS Gates
    Acoustic emission behaviour in 3-D carbon/carbon composites
    Masters, Purdue, 1983.
  1825. Thomas Scott Gates
    An elastic/viscoplastic constitutive model for fibre-reinforced thermoplastic composites
    PhD, Purdue, 1989. DA9008615. DAIB 50(11)5184.
  1826. CH Gatward
    Effect of a flexible interlayer on mechanical properties of GRP
    PhD, Liverpool, September 1983. D53784/85.
  1827. JV Gauchel
    The viscoelastic behaviour of epoxy-glass composites.
    DSc, Washington University-MO, 1972. DA7217967.
  1828. AR Gawahale
    Fracture toughness behaviour of FRPs reinforced by aluminium particles at the interfaces
    MTech, IIT Kanpur, 1990.
  1829. J Gayda
    The effect of cryogenic cooling on the mechanical behaviour of a metal-matrix composite
    Masters, CWRU, 1978.
  1830. J Gayda
    The yielding behaviour of unidirectional metal-matrix composites
    PhD, CWRU, 1980. DA8021689.
  1831. S Gazit
    Hygroelastic behaviour of GRP laminates
    MSc, Technion-IIT Israel, 1975.
  1832. MR Gecit
    The effect of adhesive layer on crack propagation in laminates
    PhD, Lehigh, 1976. DA7621811.
  1833. Sa'ad S Gedeon
    The effect of gamma irradiation on the electrical properties of the epoxy resins
    PhD, Strathclyde, 1988. D83614. DAIB 49(10)4460.
  1834. GA Geiger
    Analysis of epoxy bonded composite beams
    Masters, Arizona, 1965.
  1835. K-H Geigl
    Studium zur Oberflachenchemie von Kohlenstoffasern und zur Entwicklung von Kohlenstoff-Hohlfasern
    [Carbon fibre surface chemistry and development of hollow fibres]
    Dipl.Chem, Karlsruhe, January 1979.
  1836. DE Geiler
    Low cost natural fibre reinforced composite materials for potential applications as energy efficient building materials.
    Masters, CSULB, 1976.
  1837. RJ Geiser
    Numerical analysis of nonlinear equations for thin orthotropic spherical shells
    Masters, San Diego State Coll, 1968.
  1838. Bill Geisler
    Hybrid particle toughening of composite matrix materials
    PhD, University of Akron, 1993.  AAD9318163  DAIB54(2)857
  1839. C Geiss
    Materiaux composites a base de fibres de cuir tanne au chrome et de polyethylene bass densite
    [Chrome-tanned leather fibre low density polyethylene composites]
    DIng, INSA/Lyon I, 1980.
    >>> EV Gellhorn, see E von Gellhorn.
  1840. VL Genberg
    Optimisation of particulate composites for layered orthotropic thick cylinders
    Masters, Case IT, 1967.
  1841. Guy Jean Gendron
    Optimal design of geodesically stiffened composite cylindrical shells
    PhD, VPI&SU, 1991. DA9204638. DAIB 52(8)4327.
  1842. Sebastien Raphael Geoltrain
    Asymptotic solutions to direct and inverse scattering in anisotropic elastic media
    PhD, Colorado School of Mines, 1989. DA-565546. DAIB 50(5)1820.
  1843. C Georgallides
    Structure and tensile properties of aramid fibres
    MPhil, Leeds, 1984. ASLIB 36(3)6818.
  1844. MA George
    Finite element analysis of interlaminar defects in a composite beam
    Masters, Delaware, 1980.
  1845. BE George
    Network models for flow and adsorption in porous media
    Masters, Virginia, 1988.
  1846. IT Georgiou
    Initiation mechanisms and fatigue growth of internal delaminations in graphite-epoxy cross-ply laminates
    MS, TA&MU, December 1986.
  1847. GS Ger
    The joint strength of graphite/Kevlar hybrid composites.
    Masters, RPI, 1984.
  1848. J Gerald
    These de 3eme cycle, Paris VI, 1977.
  1849. J Gerard
    Etude de la sythese de polyurethannes be basses masses porteurs de groupements alcoyles et sulfobetainiques utilises comme agents collant et de quelques proprietes mecanique des materiaux composites obtenus
    [Study of the synthesis of polyurethanes with low molecular weight having alkyl and sulphobetainic groups used as adhesives and of some mechanical properties of the resulting composite materials]
    Doctorate, Lyon I, 1985.
  1850. Pierre Gerard
    Realisation, characterisation et etude de la relation structure-proprietes d'un composite polypropylene/ fibres de lin moule par injection
    MScA, Ecole Polytechnique, 1994.  AADAAIMM93345  MA33(4)1336
  1851. WW Gerberich
    Crack growth mechanisms in fibrous composites
    PhD, California: Berkeley, February 1971, UCRL-20524. N71-33598.
  1852. P Gerde
    A model for the uptake of polycyclic aromatic hydrocarbons by the human lung- influence of inhaled mineral fibres
    Tekn.dr, KTH Stockholm, 1987. ISBN 91-7170-912-6. DAIC 49/0346.
  1853. Craig Steven Gerhard
    Finite element analysis of geodesically stiffened cylindrical composite shells using a layerwise theory
    PhD, Virginia Polytechnic Institute and State University, 1994.  AAD9500812  DAIB55(8)3429
  1854. B Gershon
    The effect of the fibre-matrix bond strength on the mechanical properties of fibrous composites
    MSc, Hebrew Univ-Israel, 1974.
  1855. Roger Harry Gerzeski
    Enhancement of Epon 828 -teta neat epoxy resin system properties via simultaneous thermal cure and magnetic field exposure
    MSChE, Dayton, 1987. MA1339289. MA28(3)452.
  1856. JR Getten
    The deformation characteristics of aluminium boron fibre composites
    Masters, CWRU, 1969.
  1857. R Gettu
    Study of stress concentrations and stress interference in a transversely isotropic body
    Masters, Marquette, 1986.
  1858. Chahid Kamel Ghaddar
    Parallel analytico-computational methods for multicomponent media, application to thermal composites and porous-media flow
    PhD, Massachusetts Institute of Technology, 1994.  AADAAI0575906  DAB56(2)1050
  1859. Shahrokh Ghaffari
    Impact damage in graphite epoxy laminates: damage characterization, acoustic emission and finite element simulation
    PhD, Drexel, 1989. DA9005734. DAIB 50(9)4180.
  1860. S-R Ghaffarian-Hammamkar
    Statistical theory of constructing stress-strain diagram for unidirectional fibrous composite materials
    PhD, UCLA, 1982. DA8229673.
  1861. SR Ghaffariyan
    <microwave assisted pultrusion>
    PhD, UMIST, August 1990.
  1862. Badr Mohammad Naji Ghaleb
    Strengthening of damaged reinforced concrete beams by external fiber glass plates
    MS, King Fahd University of Petroleum and Minerals - Saudi Arabia, 1992.  AAD1355312  MA32(3)1018
  1863. M Ghandtchi
    Contribution a l'etude des proprietes mecaniques des materiaux composites
    [Study of mechanical properties of composite materials]
    Dissertation, Lyon I, 1973.
  1864. MN Ghasemi Nejhad
    Effects of open holes (moulded-in and drilled) and low velocity impact damage on the compressive strength of woven carbon fibre reinforced polymer composites
    Masters, Delaware, 1987.
  1865. Mohammad Naghi Mehrdad Ghasemi Nejhad
    Three-dimensional thermal and residual stress analysis of in situ thermoplastic composite filament winding
    PhD, University of Delaware, 1992.  AAD9301775  DAIB53(9)4902
  1866. Farshad Ghasripoor
    Friction and wear of short fibre reinforced aluminium-silicon alloy
    PhD, Brunel, June 1990. DX93548. DX93563. DAIB 52(6)3236.
  1867. Assadollah Ghazavi
    Nonlinear dynamics and control of a spatial high speed composite material flexible robot arm
    PhD, Nevada - Reno, 1990. DA9032552. DAIB 51(6)3086.
  1868. MM Ghobrial
    Analysis and stability of orthotropic cylindrical cantilever shells
    PhD, Windsor-Canada, 1977.
  1869. A Ghodsi
    Finite element analysis of a fibre reinforced plate in the thickness direction
    Masters, Syracuse, 1983.
  1870. TK Ghosh
    Low velocity impact damage of hybrid composites
    Masters, Tulsa, 1981.
  1871. TK Ghosh
    Computational model for bending behaviour of plain woven fabrics
    PhD, NCSU, 1987. DA8723540.
  1872. Kunal Prasad Ghosh
    Average dielectric function and spectral representation of composites with fractal structure
    PhD, Iowa SU, 1988. DA8825915. DAIB 49(9)3835.
  1873. AA Giaedi
    On buckling and postbuckling of composite square plates in shear
    Masters, Stanford, 1984.
  1874. JC Gianotti
    Dynamic wetting of carbon fibres and polymer filaments
    Masters, University of Washington-WA, 1982.
  1875. MN Gibbins
    Investigation of the fatigue response of composite laminates with internal flaws
    Masters, VPI&SU, 1979.
  1876. RF Gibson
    Elastic and dissipative properties of fibre-reinforced composite materials in flexural vibration
    PhD, Minnesota, 1975. DA7614892.
  1877. FW Gibson
    The effect of chemical structure on the linear viscoelastic properties of epoxy resins
    Masters, Purdue, 1988.
  1878. JR Gibson
    Preferred fibre orientation in the injection moulding of polyester thermosets
    PhD, Brunel, September 1988. DX91440. ASLIB 39(2)5179.
  1879. Richard Lloyd Gibson
    Elastic wave propagation and scattering in anisotropic fractured media
    PhD, MIT, 1991. DA92-571015. DAIB 52(10)5158.
  1880. J Giess
    Environmental degradation of GRP
    MSc, Cambridge, 1986.
  1881. GG Gietz
    Optimum design of stringer stiffened laminated circular cylinders
    Masters, Toronto, 1985.
  1882. FM Giglio
    Effect of metallic ring reinforcement on the stress concentrations around a circular penetration in a fibre-reinforced rectangular plate
    Masters, Pennsylvania SU, 1973.
  1883. O Gilat
    The effect of moisture content on creep of GRP laminates.
    MSc, Technion-IIT Israel, 1975.
  1884. SM Gilbert
    Deformation characteristics and textures of cold-rolled fibre-reinforced copper composites
    PhD, London, 1979.
  1885. DL Gilbert
    Synthetic polymer/biopolymer composites
    Masters, Utah, 1984.
  1886. DG Gilbert
    Fracture and deformation of amorphous polymers
    PhD, Cambridge, 1984-85.
  1887. Michael David Gilbert
    Mechanism and kinetics of the dicyandiamide cure of epoxy resins
    PhD, Massachusetts, 1988. DA8822658. DAIB 49(8)3226.
  1888. AH Gilbert
    Toughening tetrafunctional epoxy resins with thermoplastics
    PhD, Cranfield IT, December 1988. DX86767. DAIB 50(9)4168. [Incorrectly quoted as CNAA in SDI]
  1889. DR Gilbreath
    Delamination failure modes in filament wound composite tubes
    Masters, Nebraska, 1987.
  1890. RC Gilkie
    Pyramids in lightweight roof systems
    PhD, Surrey, 1967.
  1891. D Gilletta
    Modelisation mecanique et identification de la couche elementaire
    [Mechanical modelling and identification of elementary layers]
    DIng, Paris VI: P&M Curie, 1985.
  1892. JW Gillespie
    Evaluation of embedded spar composite design concept.
    MS, Delaware, 1978.
  1893. JW Gillespie
    On the analysis of certain problems in continuous and discontinuous fibre composite materials
    PhD, Delaware, 1985. DA8517688.
  1894. GJ Gillette
    Effective property bounds for two-phase random suspensions using statistics of inclusion geometry
    PhD, Catholic Univ.America, 1985. DA8507810.
  1895. LSN Gilman
    Photoelastic study of the load transfer mechanism around a hole in a filamented composite material
    Masters, CSULB, 1979.
  1896. Scott David Gilmore
    Thermal and residual stress analysis in processing of thermoplastic composites
    PhD, Delaware, 1991. DA9206310. DAIB 52(9)4932.
  1897. Chung Keun Gim
    Finite element modelling of two-dimensional delamination growth in laminated composites
    PhD, Drexel, 1990. DA9115905. DAIB 52(1)472.
  1898. J Ginder
    A new look at the analytical problem of the buckling of anisotropic circular cylindrical shells under axial compression
    Masters, Toronto, 1987.
  1899. AL Gingerich
    Large deflection theory of thin orthotropic shells of revolution
    Masters, San Diego State Coll, 1965.
  1900. JC Gionotti
    Dynamic wetting of carbon fibres and polymer filaments.
    MS, University of Washington-WA, 1982.
  1901. Li Den Gir
    Dissertation, KISI USSR, 1959.
  1902. Maria Antonietta Girardi
    The use of polyester/urethane acrylate blends as matrix materials for glass-fibre composites
    MPhil, Bath, 1991.
  1903. F Girot
    <compocasting of discontinuous reinforcement metal matrix composite
    PhD, Bordeaux, 1987.
  1904. H-W Gitschner
    Diffusionbedingte Verformungs- und Spannungszustande in Verbundwerkstoffen-dargestellt am Beispiel der wasserabsorption in GF-UP and GF-EP [Diffusion limited deformation and tension in composite materials: examples of water absorption in glass/polyester and glass/epoxy]
    Dissertation, RWTH Aachen, 1980. DS8011.
  1905. RC Givler
    Numerically predicted fibre orientations in dilute suspensions
    Masters, Delaware, 1981.
  1906. RC Givler
    Numerical techniques for the prediction of flow induced orientation
    PhD, Delaware, 1983.
  1907. MD Glad
    <microdeformation and network structure in epoxies>
    PhD, Cornell, 1986.
  1908. DD Gladstone
    Optimum design for composite beam sections
    Masters, MIT, 1965.
  1909. RC Glass
    The use of electrochemical characterisation techniques to non-destructively evaluate simulated in-service damage in CFRP
    Masters, Virginia, 1987.
  1910. KM Gloechner
    Ultimate flexural strength of unbonded rectangular concrete beams post-tensioned with fibreglass tendons
    Masters, Virginia, 1965.
  1911. Bernhard Hubert Glomm
    Investigations on processing, structure and morphology of rigid-road aramid fibers
    Untersuchung verspinnbarkeit neuartiger vollaromatischer polyamide sowie charakterisierung des gewonnenen fasermaterials mit physikalischen methoden
    DrScNat, Eidgenossische Technische Hochschule Zuerich - Switzerland, 1993.  AADC359658  DAIC55(3)901
  1912. Neil David William Glossop
    An embedded fibre optic sensor for impact damage detection in composite materials
    PhD, Toronto, 1989. DA-565945. DAIB 50(6)2577. UTIAS 332.
  1913. HT Godard
    The effect of water vapour on the strength of metallised E-glass fibres
    Masters, Virginia, 1979.
  1914. HT Godard
    Aspects of the silicon carbide filament/silicon interface
    PhD, Ohio SU, 1986. DA8703543.
  1915. MA Godil
    Low velocity impact damage of composite materials
    Masters, Delaware, 1987.
  1916. RW Goettler
    Interfacial shear stresses in fibre reinforced glasses
    MS, Ohio SU, 1988.
  1917. Douglas Paul Goetz
    Determination of the mode I delamination fracture toughness of multidirectional composite laminates
    PhD, TA&MU, 1988.  DA8913367.  DAIB 50(4)1609.
  1918. JR Goff
    The geometry of tubular braided structures
    Masters, Georgia IT, 1977.
  1919. Bernard Emile Goffaux
    The relation between fracture toughness and microstructure in thermoplastic polymers and composites
    Katholieke Universiteit Leuven (Belgium), 1993.  AADC359653  DAIC55(3)991
  1920. KM Golden
    Bounds for effective parameters of multicomponent media by analytic continuation
    PhD, New York, 1984. DA8505495.
  1921. AR Goldey
    Experimental study of strain concentration around bearing hole in a fibre reinforced plate
    Masters, GWU, 1970.
  1922. C Golding
    The impact properties of composites manufactured from hybrid glass-carbon fibre tapes
    BSc, Surrey, June 1975.
  1923. AYa Gol'dman
    <creep experiments>
    Dissertation, Moscow, 1966.
  1924. MV Goldmanis
    Stability and optimisation of shells of revolution made of composite materials
    Dissertation, TS Riga, 1984.
  1925. Stephen Lee Golledge
    The effect of oxide film properties on the corrosion behaviour of silicon carbide/aluminium metal matrix composites
    PhD, John Hopkins Univ, 1991. DA9113667. DA 51(12)6050.
  1926. Jose Pantaleon Gomez III
    Fatigue properties of silicon carbide/aluminium composites
    PhD, Virginia, 1988.  DA8913014.  DAIB 50(4)1598.
  1927. Jaime Alberto Gomez
    Oligomeric titanates as coupling agents for fibre-reinforced composites
    PhD, Connecticut, 1989. DA9023893. DAIB 51(4)1853.
  1928. Jean-Louis Gonnaud
    A probabilistic approach to the critical element model for fatigue in composite materials
    MS, Rice, 1989. MA1338750. MA 28(2)308.
  1929. Maurice Francois Gonon
    Elaboration and characterisation of ceramic composites based on a matrix obtained by pyrolysis of a polysilazane precursor reinforced with continuous fibers
    Elaboration et caracterisation de composites a fibres longues et a matrice ceramique obtenue par pyrolyse d'un precurseur organometallique de type polysilazane
    Dr, Institut National des Sciences Appliques de Lyon - France, 1993.  AADC373166  DAIC55(4)1310
  1930. IR Gonsalves
    Finite element analysis of nonlinear transient heat conduction and thermoelasticity in layered structures:a polar co-ordinate analysis
    Masters, Kentucky, 1986.
  1931. H Gonzalez
    The application of the Dugdale model to an orthotropic plate
    Masters, VPI&SU, 1968.
  1932. GG Gonzalez Gracia
    Evaluation of polar and nonpolar plastics compounded with thermomechanical wood fibres
    PhD/Masters, Mississippi SU, August 1979. DA7927088.
  1933. Jose Gonzalo Gonzalez Reyes
    Reactivity and microstructural characterization of boron carbide/aluminium interface: application to carbon fiber composites
    Reactivite et caracteristion microstructurale a l'interface B4C/Al: application aux composites a fibre de carbone
    PhD, Institut National des Sciences Appliques de Lyon, 1993.  AADC347340  DAIC55(2)662
  1934. VM Gonzalez Romero
    Study of reactive polymer processing with fibreglass reinforcement
    PhD, Minnesota, December 1983. DA8404232.
  1935. N Gonzalez-Soule
    Determination of mechanical properties for a fibreglass sucker rod
    Masters, Texas @ El Paso, 1987.
  1936. VL Goodwin
    Effect of fibre orientation on the fatigue performance of fibre reinforced composite materials
    PhD, NCSU Raleigh, 1968. DA6907661.
  1937. WP Goodwin
    Effects of battle damage repair on the natural frequencies and mode shapes of curved rectangular composite panels
    Masters, AFIT @ WPAFB, 1988.
  1938. HD Goonetilleke
    Free edge effects around holes in composite laminates
    PhD, UBC Vancouver, 1986.
  1939. M GopakumarMC
    Development of moulding compounds and prepregs for FRP compression moulding
    MTech, IIT-Madras, 1982.
  1940. Ramesh Gopalakrishnan
    Dynamic stability of cylindrical composite shells
    PhD, State University of New York at Stony Brook, 1994.  AAD9433171  DAIB55(7)2968
  1941. Deepak Gopata
    Electromagnetic processing:  application in ceramic composites and metal casting
    PhD, University of California, Berkeley, 1993.  AAD9430513  DAIB55(7)2954
  1942. PJ Goransson
    Wave propagation in stiffened panels
    Masters, MIT, 1984.
  1943. YuA Gorbatkina
    Adhesive strength in polymer-fibre systems.
    Doctorate, Phys.Math.Sci-Riga/Moscow, 1983.
  1944. AV Gorbunov
    Study of gears made of epoxy plastics [composite materials]
    Dissertation, Tech.Sci.Dnepropetrovsk, 1969.
  1945. F Gordaninejad
    Deflection and vibration in shear deformable beams and laminated composites made of bimodular and multimodular materials
    PhD, Oklahoma, 1983. DA8404565. N84-26066.
  1946. MJ Gordon
    Modulus of rigidity of a fibre reinforced composite shaft
    Masters, S.Florida, 1969.
  1947. FE Gordon
    Fabrication and analysis of Tetra-Core: a layered anisotropic fibre composite
    DEngr, Kansas, 1971. DA7127233.
  1948. RD Gordon
    A study of filament winding
    MSc, Glasgow, 1971!.
  1949. DP Gordon
    An investigation of the mechanism of delamination of a finite length laminate composite under uniaxial tension
    Masters, Auburn, 1981.
  1950. JG Goree
    Some linear elastostatic boundary value problems for composite materials
    PhD, Alabama, 1966. DA6701324.
  1951. DG Gorman
    Transverse vibration of thermally stressed stationary and rotating discs
    PhD, Strathclyde, 1977.
  1952. Ravi Gorthala
    Resin flow, cure and heat transfer analysis for pultrusion processing of composite materials
    PhD, University of Mississippi, 1992.  AAD9232261  DAIB53(6)3110
  1953. M Goskoy
    Fatigue of resin treated cotton fibres
    PhD, UMIST, May 1981. D47130/83.
  1954. M Goskoy
    A study of yarn-on-yarn abrasion
    PhD, UMIST, 1986.
  1955. Michael Richard Gosz
    On the constitutive response of transversely loaded fiber composites with compliant interphases
    PhD, Northwestern University, 1993.  AAD9327199  DAIB54(5)2585
  1956. A Gotera
    Strength of fibre resin rods under compression and bending loads
    Masters, Bucknell, 1973.
  1957. EM Gotlib
    Investigation of the efficiency of modification of epoxy polymer with carbonyl-containing elastomers at the chemical formation stage
    Dissertation, Leningrad, 1977.
  1958. M Gotteland
    On variational formulae for the theory of multilayer plates from the point of view of applications to the finite element method
    3eme cycle doctorate, Paris, January 1976.
  1959. Pascalis K Gotsis
    Elasto-plastic analysis of unidirectional fibre-reinforced composites subjected to transverse normal loading using the finite element method
    PhD, UCLA, 1989. DA8922219. DAIB 50(6)2584.
  1960. T Gottesman
    Effective elastic moduli of cracked materials
    PhD, Tel Aviv, 1980.
  1961. M Gouda
    Fatigue crack initiation and growth in aluminium boron composite materials
    Masters, Connecticut, 1976.
  1962. MA Gouda
    Thermal expansion hysteresis & dimensional instability of an alumina/aluminium composite
    PhD, NCSU Raleigh, 1981. DA8209466.
  1963. CLH Gougnet
    Les dermites de contact aux resines epoxy et leur prevention
    [Contact dermatites from epoxy resins and its prevention]
    Disseratation, Tours, 1975.
  1964. LE Govaert
    Deformation behaviour of oriented polyethylene fibres
    PhD, Eindhoven UT, 1990.
  1965. Yasser Abdelhamid Gowayed
    An integrated approach to the mechanical and geometrical modelling of textile structural composites
    PhD, NCSU Raleigh, 1992. DA9219663. DAIB 53(2)1049.
  1966. S Gowri
    Development of wear resistant composite materials.
    MTech, IIT-Madras, 1985.
  1967. AR Goyal
    Calculating the thermal conductivity of glass fibre reinforced plastics
    Masters, Lowell, 1974.
  1968. Yury Grabovsky
    Bounds and extremal microstructures for two-component composites:  a unified treatment based on the translation method
    PhD, New York University, 1994.  AADAAI9514386  DAB56(1)276
  1969. AS Gracewski
    Investigation into the impact resistance of fibreglass reinforced plastic sheet moulding compound
    Masters, MIT, 1978.
  1970. Zbigniew Mieczslaw Grabowski
    Transient heat conduction properties of composites with periodic microstructure
    PhD, University of Connecticut, 1995.  AADAAI9541595 DAB56(8)4414.
    >>> GGG Gracia, see GG Gonzalez Gracia.
  1971. PA Gradin
    Fatigue and fracture in bi-material bodies
    Dissertation #73, Linkoping, 1981.
  1972. LM Grady
    Design and production of needle punched nonwoven fabrics for use in apparel
    MPhil, CNAA: Huddersfield/ICI, 1982.
  1973. JE Grady
    Dynamic delamination crack propagation in a graphite/epoxy laminate
    PhD, Purdue, 1985. DA8606544. N87-10402.
  1974. Douglas Lee Graesser
    Design of laminated composite panels optimized for damage tolerance
    PhD, University of Washington, 1993.  AAD9401427  DAIB54(8)4263
  1975. RT Graf
    Spectroscopic and mechanical studies of glass fibre reinforced polyester
    Masters, CWRU, 1983.
  1976. Ehoud Graff
    Mechanical behaviour of thick curved laminated composites
    PhD, Stanford, 1989. DA9011502. DAIB 50(12)5751.
  1977. Michael C Graff
    Macromechanical properties characterization of an advanced polymeric composite made by filament winding
    Masters, Brigham Young, 1988.
  1978. KC Gramoll
    Thermoviscoelastic characterisation and predictions of Kevlar/epoxy composite laminates
    PhD, VPI&SU, 1988. DA8814583.
  1979. DH Grande
    Microdebonding test for measuring shear strength of the fibre-matrix interface in composite materials
    MS, MIT, 1983.
  1980. DH Grande
    Testing and properties of high-temperature glass-ceramic matrix composites
    PhD, MIT, 1987.
  1981. L Grateau
    Etude de comportement mecanique de composites monofilamentaires SiC/SiC: role de l'interface
    [Mechanical loading of monofilament SiC/SiC composites: interface]
    PhD, Orsay, 1987.
  1982. MJ Graves
    The effects of compression-compression fatigue on balanced graphite/epoxy laminates with holes
    S.M, MIT, February 1979.
  1983. MJ Graves
    The catastrophic failure of pressurized graphite/epoxy cylinders
    PhD, MIT, September 1982.
  1984. SR Graves
    Finite element analysis of a bonded joint in a composite tube subjected to torsion
    Masters, Wyoming, 1979.
  1985. TL Gray
    Damage interactions in composites
    MS, AFIT WPAFB, June 1973.
  1986. RJ Gray
    Fibre/matrix interfacial bond shear strength and its influence on the mechanical properties of steel fibre reinforced cementitious matrices
    PhD, Calgary-Canada, 1982.
  1987. NP Gray
    Expert systems in engineering design [for selection of polymers]
    MSc, UMIST, October 1984. D71309/87.
  1988. Carl E Gray
    Large-amplitude finite element flutter analysis of composite panels in hypersonic flow
    PhD, Old Dominion, 1991. DA9130674. DAIB 52(6)3248.
  1989. JM Grayson
    A modified rail shear test for thin composite plates.
    Masters, Georgia IT, 1972.
  1990. RV Graziano
    The effects of high bonding pressures on fracture of adhesive joints and reinforced polymers
    PhD, CWRU, 1975. DA7616045.
  1991. H Grebner
    Fracture-mechanical investigations on the propagation of heat-tension-cracks in brittle multicomponent media
    DEng, Gesamthochschule Paderbon-Germany, 9 February 1983. INIS-mf-8337. DE84780293. In German.
  1992. DJ Green
    Crack-particle interactions in brittle composites
    PhD, McMaster-Canada, 1977.
  1993. ER Green
    Through panel constructions containing relatively stiff, partially reticulated plastic foam
    Masters, Purdue, 1986.
  1994. Stuart Green
    Creep behaviour of short glass fibre reinforced nylon 6,6
    PhD, Liverpool, 1988. DX94063. ASLIB 39(1)1944. DAIB 52(8)4410.
  1995. DC Greene
    A probabilistic study of particle induced flaws in carbon fibre from mesophase pitch
    Masters, CWRU, 1980.
  1996. Harold J Greene
    Evaluation of corrosion protection methods for aluminum metal matrix composites
    PhD, University of Southern California, 1992. AAD0572506. AAD9303189. DAIB53(9)4885. DAB53(9)4903
  1997. Joseph Paul Greene
    Fiber orientation during injection molding of glass-fiber-reinforced thermoplastics:  an experimental and numerical investigation
    PhD, University of Michigan, 1993.  AAD9332073  DAIB54(7)3732
  1998. MR Greenfield
    Bounds on the probability of failure for fibrous composites under localised load sharing
    MSc, Cornell, 1981.
  1999. David CL Greenfield
    The cure characteristics and physical properties of glycidyl ether epoxy resins
    PhD, Brunel, 1988. DX83292. DAIB 49(8)3382. ASLIB 38(3)5370.
  2000. S Greenhalgh
    Mechanical characterisation of twisting-bending coupling on composite box-beam structures
    Masters, North Carolina State University @ Raleigh, 1992
  2001. RS Greenleaf
    Stress systems in an orthotropic quarter plane
    Masters, Drexel IT, 1986.
  2002. Joachim L Grenestedt
    Layup optimization of composite structures
    TeknDr, Kungliga Tekniska Hogskolan - Sweden, 1992.  AADC326267  DAIC55(1)293
  2003. TH Grentzer
    Influence of interfacial adhesion on the engineering properties of glass fibre reinforced polypropylene
    Masters, Akron, 1983.
  2004. Arron Jamieson Greso
    Applications of epitaxy and nucleating agents for optimizing semicrystalline thermoplastic composites
    PhD, University of Tennessee, 1994.  AADAAI9518101  DAB56(3)1454
  2005. PJ Grey
    Polymerisation and surface interaction of a silane coupling agent
    PhD, London: City, January 1984. DX84530.
  2006. KA Grieger
    Experimental investigation of moisture and temperature conditioning of C600/5208 graphite/epoxy composite material
    Masters, TA&MU, August 1979.
  2007. TJ Griesbach
    Finite element analysis for plastic flow in unidirectional fibre composites
    Masters, CWRU, 1975.
  2008. F Grieser
    Untersuchung isomerer Polyphenylene als Ausgangssubstanz fur Kohlenstoff und versuche zur technischen Anwendung fur Verbundkorper und Fasern aus Kohlenstoff [Polyphenylene isomers and raw materials for carbon materials and trials for technical use on composite bodies and carbon fibres]
    Dipl.Chem, Karlsruhe, October 1977.
  2009. JH Griffin
    Transverse elastic constants of fibre reinforced composites
    Masters, S.Florida, 1969.
  2010. OH Griffin
    Three dimensional inelastic finite element analysis of laminated composites
    PhD, VPI&SU, 1980. DA8024006. N81-10106.
  2011. MJ Griffin
    Low velocity solid particle erosion of model diphasic materials
    Masters, Pennsylvania SU, 1986.
  2012. RE Griffith
    Investigation of the mechanics of loop formation in warp knitting
    PhD, Leeds, October 1981. D78100.
  2013. JA Griffiths
    Analysis and design of composite adhesively bonded step joints
    Masters, MIT, 1973.
  2014. JR Griffiths
    Fatigue of glass reinforced plastics under complex stresses
    PhD, Nottingham, October 1974.
  2015. WI Griffith
    The accelerated characterisation of viscoelastic composite material
    PhD, VPI&SU, April 1980. DA8101884. N81-18093. N80-24370. NASA-CR-163188. VPI-E-80-15.
  2016. Robert Paul Griffiths
    Physical ageing effects in crosslinked epoxy resins
    PhD, Brunel, October 1988. DX84733.ASLIB 38(2)4482.DAIB 49(12)5476.
  2017. PR Griggs
    Filament wound GRP tubes: development of methods of manufacture and testing under biaxial stress
    MSc, UMIST, 1979.
  2018. SC Griggs
    Numerical two-dimensional thermal analysis of the curing cycle of composites
    Masters, Texas @ Arlington, 1984.
  2019. Anne-Cecile Grillet
    Influence de la structure des comonomeres sur leur reactivite et sur les proprietes mecaniques des reseaux epoxyde-amine. Renforcement de ces copolymeres par un elastomere reactif [Influence of curing agent structure on reactivity and mechanical properties of epoxy amines. Reinforcement of these coplymers with a reactive rubber]
    DE, INSA Lyon, 1989. DA-C110324. DAIC 51(1)114.
  2020. Toni Lynn Grobstein
    The interface in tungsten fibre reinforced niobium metal matrix composites
    PhD, CWRU, 1989. DA9004505. DAIB 50(9)4168.
  2021. Albert Anne Groenwold
    Finite element analysis of composite plates and shells
    MEng, University of Pretoria - South Africa, 1994.  AADO665352  MA32(6)1695
  2022. RL Groff
    Thermal stresses in laminated circular plates
    Masters, Marquette, 1968.
  2023. JK Grogan
    Elastic theory of composite materials
    Masters, Vermont, 1977.
  2024. Daniel Lee Grolemund
    Structure characterization in inhomogeneous media by means of ultrasonic scattering:  Monte Carlo methods and experiments
    PhD, University of California - Irvine, 1994.  AAD9417910  DAIB55(2)455
  2025. MJ Gronet
    Vibrations and deflections of built-up graphite/epoxy wings with bending-torsion coupling
    Masters, MIT, 1984.
  2026. CD Gross
    Investigation of flexural stresses in a pre-flexed timber beam
    Masters, Ohio, 1965.
  2027. RS Gross
    Analysis of a unidirectional composite containing broken fibres and matrix damage
    Masters, Clemson, 1979.
  2028. Robert Steven Gross
    Optimal design of composite torque tube ends
    PhD, Clemson, 1988. DA8903193. DAIB 49(11)4988.
  2029. DT Grossman
    Fatigue behaviour of angle-ply fibrous composite laminates
    Masters, MIT, 1971.
  2030. HL Groth
    Analysis of adhesive joints
    Doctorate, KTH Stockholm, 1987. Report 87-17.
  2031. Stephen M Grove
    Anisotropy of heat conduction in fibre-reinforced composites
    PhD, CNAA: Plymouth, October 1985. D66355/86. ASLIB 36(2)4169.
  2032. DA Grove
    Mathematical model of solid-state thermo-oxidative stabilisation of acrylonitrile-based precursors to carbon fibres.
    MS, Georgia IT, 1986.
  2033. A Groves
    Structural analysis of fibre-reinforced metallic rocket motor cases
    PhD, CNAA: Kingston, December 1985. D67185/86. ASLIB 37(3)6054.
  2034. SE Groves
    A study of damage mechanics in continuous fibre composite laminates with matrix cracking and internal delaminations.
    PhD, TA&MU, December 1986. DA8707416.
  2035. RL Grubb
    The effects of circular holes on the ultimate strength of graphite/epoxy laminates
    Masters, Wichita SU, 1983.
  2036. MB Gruber
    Mechanical properties of hybrid composites.
    MMAE, Delaware, June 1981.
  2037. Miroslaw Grzybowski
    Determination of crack arresting properties of fibre reinforced cementitious composites
    Tekn.dr, KTH Stockholm, 1989. DA-150105. DAIC 51(4)644.
  2038. Fan Gu
    Thermoplastic epoxy resins:their properties and property estimation
    MS, Lowell, 1990. DA1340618. MA28(4)634.
  2039. Lixing Gu
    Fracture mechanics of fibre-reinforced brittle matrix composite materials
    PhD, Florida IT, 1991. DA9209588. DAIB 52(10)5486.
  2040. Wei-Hwa Gu
    Microcrack toughening in ceramic composites
    PhD, NWU, 1991. DA9213463. DAIB 52(12)6599.
  2041. Yijun Gu
    Experimental characterisation of continuous alumina fibre/epoxy
    PhD, Wisconsin: Madison, 1991. DA9120045. DAIB 52(4)2239.
  2042. Chaoli Gu
    Radiation and scattering of electromagnetic waves at the surfaces of composite materials:  surface immittance characterization via field compensation theorem
    PhD, Florida Atlantic University, 1993.  AAD9332592  DAIB54(6)3253
  2043. Pei Gu
    Some mechanics problems of composites
    PhD, Brown University, 1994.  AAD9433368  DAIB55(7)2838
  2044. Pu Gu
    Analysis of three-dimensional woven preforms and their composite properties
    PhD, North Carolina State University at Raleigh, 1994.  AAD9425465  DAIB55(4)1649.
    >>> JM Guedes, see Jose Miranda-Guedes.
  2045. JB Guelden
    Properties of glass fibre reinforced polyester resin pipes: ring bending, compression and tension
    BE, Sydney, November 1983
  2046. VAF Guenon
    Interlaminar fracture toughness of a three-dimensional composite
    Masters, Delaware, December 1987.
  2047. B Guetta
    Vieillissement hygrothermique des composites a matrix PSP: etude cinetique, mechanique et spectroscopique [Hygrothermal ageing of polystyrylpyridine matrix composites]
    Doctorate, EMP Evry, 1987.
  2048. Felicity J Guild
    Property microstructure relationships in GFRP
    PhD, CNAA: Plymouth, March 1978. D65995/86.
  2049. GR Guillemette
    Deflection of orthotropic plates under various edge conditions
    Masters, RPI, 1987.
  2050. Herve Guillemin
    Prediction des contraintes et deformations residuelles engendrees par le cycle de fabrication pur les composites tisses de formes complexes
    MScA, Ecole Polytechnique, 1994.  AADAAIMM93347  MA33(4)1324
  2051. G Guilpain
    <the length dependence of strength of T2 carbon fibres>
    PhD, Univ.Haut-Alsace Mulhouse, 1988.
  2052. JD le H Guiton
    Glass reinforced plastic ship construction
    MSc, Newcastle, 1968.
  2053. LE Gukasyan
    Effect of the strength of the fibre-matrix interface boundary on some mechanical properties of boraluminium.
    Dissertation, Moscow, 1981.
  2054. KC Gulati
    A thermomechanical theory of composite materials
    PhD, Texas @ Austin, 1971. DA7215768.
  2055. Ronald Gulino
    Experiments on fibre break progression and local load transfer in a model graphite-glass-epoxy microcomposite
    PhD, Cornell, 1988. DA8900896. DAIB 49(10)4489.
  2056. Sunil Nathur Gulrajani
    Studies of crack propagation:  applications in homogeneous and composite media
    PhD, Cornell University, 1994.  AAD9501333  DAIB55(7)2969
  2057. Lakshmana Nagesh Babu Gummadi
    Active control of delaminations in smart composite structures
    PhD, Georgia Institute of Technology, 1992.  AAD9315877  DAIB54(1)345
  2058. Shobka Renuka Gunawardena
    Constitutive equations for weakly bonded metal matrix composites
    PhD, University of California - Santa Barbara, 1992.  AAD9303189  DAIB 53(9)4903
  2059. MN Gungor
    Solidification processing of al-4.5%cu/al2o3 composites.
    DSc, MIT, September 1986.
  2060. Ming Guo
    Mechanical properties of fabric composites
    MS, University of Nevada - Reno, 1992.  AAD1347559  MA30(4)1458
  2061. BVR Gupta
    Vibration of damped periodic structures
    PhD, IIT Madras, 1985.
  2062. V Gupta
    Measurement of [graphite/aluminium composite] interface toughness
    MS(CE), MIT, 1986.
  2063. KM Gupte
    Microstructure and mechanical properties of oriented poly (ethylene terephthalate) fibres
    PhD, Delaware, 1981. DA8109620.
  2064. Z Gurdal
    Automated design of composite plates for improved damage tolerance
    PhD, VPI&SU, 1985. DA8511965. N86-12254.
  2065. M Guroglu
    Stress analysis of layered cylindrically orthotropic solid bodies
    Masters, Kansas, 1980.
  2066. K Guruswamy
    The marine durability of steel fibre reinforced concrete
    PhD, Aberdeen, July 1986. DX77460.
  2067. MP Gurvich
    Long-term structural strength criteria for laminated reinforced plastics
    Dissertation, Riga, 1983.
  2068. Claes-Goran Gustafson
    Initiation and growth of fatigue damage in graphite/epoxy and graphite/PEEK laminates
    Tekn.Dr, KTH Sweden, 1988. DA-C58423. DAIC 50(1)138.
  2069. TW Gustafson
    Preparation and properties of ceramic reinforced magnesium-aluminum alloy composites
    Masters, Virginia, 1987.
  2070. MM Gutauskas
    Mechanical stability of textiles and methods of evaluation
    Doctorate, Kaunas, 1977.
    >>> AJ Gutierrez, see PS Cheng.
  2071. JM Gutkowski
    An experimental study of the thermal behaviour of polymer composites exposed to high temperatures.
    MS, Rhode Island, 1986.
  2072. MI Guy
    The thermal and photodegradation of a diglycidyl ether bisphenol-A epoxy resin system
    PhD, Glasgow, 1983.
  2073. EG Guynn
    Micromechanics of compression failures in open hole composite laminates
    MS, TA&MU, December 1987.
  2074. CCH Guyott
    The non-destructive testing of adhesively bonded structures
    PhD, London: ICST&M, 1986. ASLIB 37(1)1704.
  2075. DJ Guzy
    The longitudinal vibration of axially symmetric composite bodies
    Masters, Maryland, 1972.
  2076. Seong-Yun Gweon
    Low velocity impact damage in carbon fibre composites
    PhD, Utah, 1989. DA9015222. DAIB 50(12)5826.
  2077. HK Ha
    Analysis of three-dimensional orthotropic sandwich plate structures by finite element method
    PhD, Sir George Williams University (Concordia), 1972.
  2078. How Ung Ha
    Squeeze casting of magnesium-based alloys & metal matrix composites
    PhD, Southampton, 1988. DX84421. DAIB 50(1)311.
  2079. Sung Kyu Ha
    Mechanical behaviour of laminated composite at elevated temperature
    PhD, Stanford, 1989.  DA8912904.  DAIB 50(4)1609.
  2080. Jowoong Ha
    Toughening mechanisms in weak matrix ceramic composites
    PhD, Missouri: Rolla, 1991. DA9133819. DAIB 52(6)3236.
  2081. Jong-Bae Ha
    The compression study of unidirectional single-ply composites
    PhD, Utah, 1992. DA9226183. DAIB 53(4)2009.
  2082. VG Habbu
    Synthesis and properties of liquid crystalline polyesters and polyesteramide [spun fibres]
    PhD, Leeds, June 1988. D86609. ASLIB 39(1)2309.
  2083. SA Haberman
    Physical separation of airborne asbestos fibres by size
    PhD, Cincinnati, 1983. DA8406091.
  2084. Fadhil A Habib
    Evaluation of repeated impact damage in composite structures
    PhD, CNAA: Paisley CT, December 1988. DX86532. DAIB 50(7)3109.
  2085. A Hachler
    <fatigue of angle-ply composites>
    MS, ETH Zurich, 1972.
  2086. HA Hackerott
    Characterisation of multiaxial fracture strength of transversely isotropic AGOT graphite
    MS, Kansas SU, 1982.
  2087. YM Haddad
    Response behaviour of a two-dimensional fibrous network.
    PhD, McGill-Canada, 1975.
  2088. Mohammad Jafar Hadian
    Modal interactions in the dynamic response of isotropic and composite plates
    PhD, Virginia Polytechnic Institute and State University, 1992.  AAD9223448  DAIB53(5)2393
  2089. Ioannis Nikolaos Hadjinikolaou
    Fiber-reinforced thermoplastic composites for dental applications
    PhD, University of Connecticut, 1994.  AADAAI9520001  DAB56(2)1036
  2090. NM Hadjis
    Interfacial forces in fibre reinforced polymers
    MASc, Toronto, 1975.
  2091. Abdelkrim Hadj-Mimoune
    Modelisation du comportement des solides toronnes en flexion par des couches orthotropes minces
    PhD, Universite Laval (Canada), 1994.  AADNN91462 DAIB55(10)4565
  2092. B Haeri
    An energy type solution for orthotropic plates
    Masters, California State Coll, 1968.
  2093. U Hafer
    Geschwindigkeits- und Druckprogrammierung fur die SMC-Verarbeitung
    [Relative speed and pressure programming for SMC processing]
    Diplomarbeit, IKV Aachen, 1981.
  2094. H Haferkamp
    Zum Alterungsverhalten glasfaserverstarkter Kunststoffe [Ageing behaviour of GFRP]
    Dissertation, TH Hannover, 1962.
  2095. AJ Hagger
    Kinetic and mechanistic aspects of amine-epoxide reactions
    PhD, Surrey, January 1989. DX86745. DAIB 50(9)4028.
  2096. TA Hahn
    Thermal expansion behaviour and analysis for Al-Si eutectic alloys and the composite material systems: Al-SiC and Al-W
    PhD, Maryland, 1986. DA8620783.
  2097. O Haider
    Ermittlung der dreidimensionalen Werkstoffgesetzes von geschichteten Laminaten
    [Study of 3-D material laws in laminate histories]
    Diplomarbeit, TU-Munchen, 1985.
  2098. WB Haile
    A study of viscoelastic anisotropic shell structures.
    PhD, VPI&SU, 1967. DA6802048.
  2099. Zbigniew Hakiel
    The buckling of off-axis orthotropic cylindrical shells in torsion
    PhD, Rochester, 1989. DA9019818. DAIB 51(2)939.
  2100. N Hakman
    Polyisocyanurate resins and composites
    MSc, Hebrew Univ-Israel, 1975.
  2101. Mohammed Raheef Hakmi
    Local buckling of sandwich panels
    PhD, Salford, October 1988. D86831. DAIB 50(10)4661.
  2102. JM Hale
    An investigation of changes in the response to ultrasonic excitation of damaged glass reinforced plastic as the basis of a nondestructive test
    PhD, UMIST, 1983. Thesis: P2979.
  2103. F Hall
    A finite element analysis of shrinkage stress fields in two-phase materials
    Masters, TA&MU, 1980.
  2104. CK Hall
    Matrix modification of liquid epoxide syntactic foams for aerospace radome applications
    MPhil, Brunel, 1989. DX77782. ASLIB 39(2)5180. {1984 in ASLIB!}.
  2105. MA Hallam
    The fracture behaviour of oriented polyethylene
    PhD, Leeds, 1987. D76010. ASLIB 37(3)6028.
  2106. RR Hallman
    Composite element solution to birefringent coating reinforcement
    Masters, Worchester PI, 1976.
  2107. Gary Wade Hallum
    High-temperature effects of oxidation on magnesium oxide-silicon carbide composites
    PhD, Ohio SU, 1990. DA9031077. DAIB 51(8)4007.
  2108. JC Halpin
    Characterisation of orthotropic (fibre reinforced) polymeric solids
    PhD, Akron, 1969. DA7012664. N71-26550.
  2109. LT Halstead
    Wetting of carbon filaments by organic liquids.
    Masters, New Mexico, 1970.
  2110. Danny Charles Halverson
    Combustion synthesis of nonoxide ceramic and composite preforms for liquid-metal infiltration
    PhD, California: Davis, 1990. DA9026831. DAIB 51(5)2559.
  2111. AI Hamad
    Preparation and characterisation of some unsaturated polyester alkyds based on terephthalic and isophthalic acids.
    PhD, Loughborough, February 1980.
  2112. S Hamada
    Ultimate strength of continuous composite beams
    PhD, Alberta-Canada, 1973.
  2113. TD Hambleton
    Investigation of fire retardants & smoke suppressants, with particular regard to glass reinforced unsaturated polyester resins
    MSc, Lancaster, 1980.
  2114. JM Hamdallah
    Finite element plate formulation including transverse shear effects for representing composite shell structures
    Masters, TA&MU, 1987.
  2115. MA Hamdi
    Study of electroacoustic vibrations by a finite element method to displacements
    DIng, UT Compiegne/ENSTA, 27 November 1978.
    >>> MHA Hamdi Abdel-Mohsen, see MHAH Abdel-Mohsen.
  2116. P Hamelin
    Contribution a l'etude du comportement rheologique de liants viscoelastiques en vue de l'analyse du fluage des materiaux composites utilisees sous forme de structures en genie civil
    These d'etat, INSA-Lyon I, 1979.
  2117. ABA Hamid
    The examination of the behaviour of connected plates
    MSc, Strathclyde, 1979.
  2118. Saghizadeh Hamid
    Delamination fracture toughness and acoustic emission in fibre- reinforced epoxy laminates
    PhD, California: Berkeley, 1987. DA8814048. DAIB 49(5)1908.
  2119. R Hamidi
    A three-dimensional nonlinear composite finite element analysis of elastomeric bridge bearings
    Masters, California: Davis, 1986.
  2120. RG Hamilton
    Crack propagation in composite materials
    Masters, MIT, 1969.
  2121. Ronald Hamann
    Experimental and theoretical study of elastic and microplastic properties of particulate reinforced metal matrix composites
    Etude experimentale et theorique des proprietes elastiques et microplastiques des composites a matrice metallique a renfort sous forme de particules
    Do, Institute National des Sciences Appliques de Lyon, 1992.  AADC251966  DAIC53(4)782
  2122. Jean Marie Hammervold
    Analysis of a composite electronic board assembly
    MS, California State University Long Beach, 1994. AAD1357577  MA33(1)245
  2123. Abdelsamad Hamoud
    Fatigue behaviour of fibre-reinforced composite cables
    MS, CSULB, 1988. MA1337321. MA28(1)141.
  2124. JM Hampey
    The effects of jet exhaust blast impingements on graphite epoxy composites
    MS, NPS Monterey, June 1981. N82-11136. AD A104 622.
  2125. FW Hampson
    The characterisation of composite materials
    MPhil, CNAA: Newcastle UT?, 1976.
    >>> WZAW Hanafi, see WZA Wan Hanafi.
  2126. Young-Myong Han
    Ply cracking in composite laminates
    PhD, Pennsylvania SU, 1989. DA9007861. DAIB 50(10)4721.
  2127. Xiaohua Han
    Elevated temperature crack growth resistance of alumina-silicon- carbide composite under static and cyclic loads
    PhD, Brown, 1990. DA9101771. DAIB 51(8)4007.
  2128. Hsiu Chi Han
    Electromagnetic wave phenomena in inhomogeneous and anisotropic media
    PhD, Massachusetts Institute of Technology, 1992.  AAD0572210  DAIB53(6)3064
  2129. Kerang Han
    Analysis of dry spot formation and changes in liquid composite moulding
    PhD, Ohio State University, 1994.  AADAAI9517012  DAB56(1)471
  2130. Jorge Hanchi
    Fundamental aspects of the tribological behavior of poly (ether-ether-ketone)-based insitu composites at elevated temperatures
    PhD, Virginia Polytechnic Institute & State University, 1995.  AADAAI9538601 DAB56(7)3977
  2131. Daniel Quincy Hand
    Three-dimensional heat conduction in laminated anisotropic solids
    MS, Arizona, 1988. DA1334080. MA 27(1)138.
  2132. Scott Michael Handley
    Physical principles pertaining to ultrasonic and mechanical properties of anisotropic media and their application of nondestructive evaluation of fiber-reinforced composite materials
    PhD, Washington University, 1992.  AAD9234313  DAIB53(7)3536
  2133. RN Handy
    Interlaminar fatigue of fibre-reinforced laminates.
    Masters, MIT, 1971.
  2134. Ravishankar V Haniyur
    Application of electrochemical impedance spectroscopy as a non-destructive technique to characterize and detect degradation of carbon/nylon-6 composites in aqueous environments
    MS, Florida Atlantic University, 1993.  AAD1351985  MA31(4)1906
  2135. JT Hanley
    Stress concentration in a laminated beam under axial load
    Masters, Dartmouth College(US), 1973.
  2136. WR Hanley
    The development and evaluation of an experimental apparatus for the investigation of fastener pull-through failure in graphite/epoxy laminates
    Masters, NPS Monterey, 1979.
  2137. S Hanna
    Structure and phase transitions of some crystalline and liquid crystalline aromatic polyesters
    PhD, Cambridge, 1989. ASLIB 38(3)5373.
  2138. H Hannache
    Materiaux composites a renfort fibreux de carbone et a matrice hybride de pyrocarbone-nitrure de bore hexagonal [Composite materials with carbon fibre reinforcement and a hybrid matrix of pyrolysed carbon-hexagonal boron nitride]
    These de 3eme cycle, Bordeaux-I, 1 March 1983. Thesis #1836.
  2139. H Hannache
    CVD du nitrure et carbure de bore. Application aux materiaux composites ceramique-ceramique
    [CVD of nitrides and carbides of boron. application to ceramic/ceramic composite materials]
    DEtatSci, Bordeaux-I, 26 September 1984. Thesis #813.
  2140. GE Hannon
    Alumina/glass composites. The effect of microstructure on mechanical properties
    PhD, Rutgers SUNJ, 1988. DA8811366.
  2141. EC Hanson
    Mixed-mode crack initiation in bonded materials
    Masters, Texas @ Austin, 1986.
  2142. A Haq
    The propagation of waves in inhomogeneous media
    Masters, CWRU, 1971.
  2143. Shaiq Haq
    Filament winding machine control using B-spline interpolation
    PhD, University of Nottingham, 1994.  AADAAIC412445  DAB56(3)787.
  2144. Koichi Haraguchi
    The effect of surface sulfonation of high density polyethylene (HDPE) on the mechanical properties of HDPE/wood fiber composites
    MS, Michigan State University, 1993.  AAD1356331  MA32(4)1218
  2145. Stuart John Harbert
    Modeling delamination characteristics and influence in a laminated plate with a part-through hole
    PhD, Texas A&M University, 1993.  AAD9328733  DAIB54(5)2706
  2146. SH Harder
    Inversion of seismic velocities for the anisotropic elastic tensor
    DGS, Texas @ El Paso, 1986. DA8629468.
  2147. ST Hardwick
    The origins and properties of transcrystalline layers in thermoplastic composites
    PhD, Brunel, September 1987. DX81182. ASLIB 37(3)6029.
  2148. Timothy Lee Hardy
    Effective parameters of composite materials
    DA, Idaho State University, 1995.  AADAAI9527445  DAB56(4)2060
  2149. H Harel
    Fracture energies of composite solid propellants
    MSc, Hebrew Univ-Israel, 1976.
  2150. R Hariharan
    An experimental investigation into the thermophysical properties of decomposing polymer composites
    Masters, Rhode Island, 1988.
  2151. IE Harik
    Bending of transversely loaded orthotropic rectangular and sector plates
    PhD, Wayne SU, 1982. DA8306886. N84-12520.
  2152. RR Haringa
    A study of linear anisotropic viscoelasticity
    Masters, AFIT, 1970.
  2153. DG Harlow
    Probabilistic models for tensile strength of composite materials
    PhD, Cornell, 1977.
  2154. David Harmon
    Damage mode characterization for a silicon carbide continuously reinforced titanium matrix composite
    DSc, Washington University, 1995.  AADAAI9533735  DAB56(6)3400.
    >>> AV Harnier, see A von Harnier.
  2155. JG Harper
    Buckling analysis of laminated composite circular cylindrical shells
    Masters, AFIT WPAFB, December 1978. AFIT/GAE/AA/78D-8. AD A081 904.
  2156. BD Harper
    Residual thermal stresses in an unsymmetrical cross-ply graphite/epoxy laminate
    Masters, TA&MU, August 1980.
  2157. BD Harper
    On the effects of postcure cool down and environmental conditioning on residual stresses in composite laminates
    PhD, TA&MU, August 1983. DA8329924. N84-21663.
  2158. DW Harper
    Fracture parameters of an anisotropic plate from whole-field displacements
    Masters, Tennessee TU, 1988.
  2159. Bilai Harras
    Optimisation des parametres regissant le soudage par ultrasons des composites de poly (ether-ether-cetone) renforce par les fibres de carbone
    M.Sc.A, Ecole Polytechnique, Montreal, 1994.  AADAAIMM97101  MA33(6)1949
  2160. RW Harris
    Some aspects of wave propagation in composite systems.
    MSc, New South Wales-Australia, 1963.
  2161. CM Harris
    Buckling of FRP plates
    MSc, Cranfield IT, September 1968.
  2162. A Harris
    A multilayer, traction-free edge, warping element for the stress analysis of composite plates and shells
    Sc.D, MIT, 1979.
  2163. JP Harris
    Thermal conductivity of high modulus fibre reinforced composites
    PhD, Salford, 1980.
  2164. CE Harris
    A characterisation of the fracture behaviour of thick notched laminated graphite/epoxy composites
    PhD, VPI&SU, 1983. DA8406625. N84-33519.
  2165. AP Harrison
    The numerical investigation of a modified Langmuir-type model for moisture absorption in resins
    MSc, Salford, 1988. ASLIB 38(1)0929.
  2166. Peter Newton Harrison
    Interlaminar stress analysis of dropped-ply laminated plates and shells by a mixed method
    PhD, Virginia Polytechnic Institute and State University, 1994.  AAD9425574  DAIB55(4)1529
  2167. DH Harry
    Modifications of boundary-element method for application to bending of layered composites
    PhD, Michigan SU, 1982. DA8308948.
  2168. Zouheir Anwar Hashem
    Structural behavior of plastic composite columns
    PhD, University of Texas at Arlington, 1993.  AAD9402813  DAIB54(8)4290
  2169. JS Harshman
    Evaluation of strength and shear characteristics in woven fabric composites
    Masters, Delaware, 1985.
  2170. GL Hart
    The chemical stability of carbon fibres & their composites.
    PhD, CNAA: Kingston, 1975.
  2171. ID Hartley
    Direct current resistance of wood polymer composites
    Masters, New Brunswick, 1988.
  2172. DR Hartman
    Structure-property relationships of acrylic precursors for carbon fibres
    Masters, Georgia IT, 1982.
  2173. HH Hartman
    The stress singularities at a bonded anisotropic wedge.
    Masters, University of Washington-WA, 1985.
  2174. AC Hartnett
    An overview of models describing the behaviour of anisotropic fluids, with specific application of the ELP continuum theory of liquid crystals
    Masters, Delaware, 1985.
  2175. RT Hartshorn
    The mechanical behaviour of cylindrical GRP panels.
    PhD, Aston & RNEC, May 1987. DX83336. ASLIB 37(1)1712.
  2176. MA Hasan
    Electromagnetic scattering from nonlinear anisotropic cylinders
    PhD, Illinois @ Chicago, 1987. DA8728748.
  2177. HN Hashemi
    Ultrasonic wave propagation in graphite fibre composites
    Masters, MIT, 1979.
  2178. WE Haskell
    Effects of processing on the mechanical properties of carbon short-fibre reinforced polycarbonate
    Masters, Lowell, 1981.
    >>> F Hasselt, see F Hesselt
  2179. Werner Paul Hassig
    Manuelle und automatische warenschau als teil der qualitatssicherung in der weberei
    [Manual and automatic fabric inspection as part of QC in weaving]
    DrScTech, ETH Zurich, 1989. DAC080795. DAIC 50(3)581.
  2180. Robert Leroy Hastie
    The effect of physical aging on the creep response of a thermoplastic composite
    PhD, VPI&SU, 1991. DA9200417. DAIB 52(7)3700.
  2181. Gary Alan Hatfield
    Conservation laws in anisotropic elasticity
    PhD, University of Minnesota, 1994.  AAD9433054  DAIB55(7)2769
  2182. MJ Haun
    Transverse reinforcement of 1-3 and 1-3-0 PZT-polymer piezoelectric electric composites with glass fibres
    Masters, Pennsylvania SU, 1983.
  2183. WM Hauser
    Wear of carbon fibre composites
    PhD, MIT, 1973.
  2184. PB Hauwiller
    Incremental forming of large fibre-reinforced thermoplastic parts
    Masters, Brigham Young, 1988.
  2185. RE Haven
    A new approach to the high frequency electric field curing of polymeric thermoset composites
    Sc.D, MIT, 1980.
  2186. JJ Havelka
    An analysis of the progression of damage in laminated composites under transient loading
    Masters, TA&MU, 1988.
  2187. CR Havis
    Effects of fibre direction on heat conduction in unidirectionally aligned fibre composites
    Masters, TA&MU, 1987.
  2188. IS Haworth
    NMR and computational studies of [aryl ether ketone co-] polymer structure
    PhD, Liverpool, September 1989. DX92495.
  2189. Muhammad A Hawwa
    Thermoelastic wave propagation in laminated composites
    PhD, Cincinnati, 1990. DA9108617. DAIB 51(11)5442.
  2190. T Hayashi
    Theory of elasticity of orthotropic structures.
    Doctorate in Engineering, Tokyo, August 1947.
  2191. MA Hayat
    Evaluation of compatibility of glass woven rovings and phenolic resins
    MSc, Lancaster, 1985. ASLIB 35-7445.
  2192. SV Hayes
    Rate sensitive tensile impact properties of fully and partially loaded unidirectional composites
    MS, Wyoming, May 1980.
  2193. JD Hayes
    The elastic stability of composite cylindrical shells under combined torsional and axial loading
    Masters, RPI, 1986.
  2194. Gary J Hayes
    Analysis of the single filament recoil test (carbon fibers)
    PhD,  Clemson University, 1993.  AAD9419644  DAIB55(3)1037
  2195. DT Hayford
    Theory of ultrasonic diffraction by damage developed in thin laminated composite
    MS, VPI&SU, September 1977.
  2196. WD Hays
    The mechanism of strength loss by thermal degradation of a phenolic resin matrix composite
    MS, RPI, 1988.
  2197. PF He
    <strength of filament wound composites>
    MasterEng.Mech, Xian Jiaotong Univ-China, March 1986.
  2198. Qi Chang He
    <modelling anisotropic damage in unidirectional composites>
    Doctorat, ECL Lyon, 1989.
  2199. Chien-Cheng He
    Three-dimensional finite element analysis of free edge delamination in composite laminate
    PhD, Purdue University, 1993.  AAD9334357  DAIB54(7)3719
  2200. Guoren He
    Continuous fiber composites with elastomeric interphases covalently bonded to both fiber surfaces and epoxy matrices
    PhD, Mississippi State University, 1994.  AAD9507521 DAIB55(10)4550
  2201. GR Headifen
    Mechanical and electrical properties of glass, carbon and glass-carbon fibre reinforced epoxy
    Masters, Texas @ Austin, 1988.
  2202. MD Heaton
    Fibre and filler reinforcement of polymers and other materials
    PhD, UMIST, July 1968. D56705/85.
  2203. JS Hebert
    Analytical/experimental linear bifurcation of curved cylindrical composite panels
    MS, AFIT WPAFB, December 1982. AFIT/GAE/AA/82D-14. AD A124 664. N83-26100.
  2204. SS Hecker
    Quantitative rheological interactions in two-component composite materials
    Masters, Case IT, 1967.
  2205. JL Hedrick
    Synthesis, properties and modifications of engineering polymers
    PhD, VPI&SU, June 1986. DA8804405.
  2206. S Hedvat
    Capillary flow studies on fibrous substrates
    PhD, Princeton, 1981. DA8111278.
  2207. D Hegen
    Studium der Gasphasenabscheidung von SiC und deren Anwendun zur Impragnierung von porosem SiC und zur Herstellung von faserverstaerktem SiC [Study of gas phase deposition of SiC and use for impregnating porous SiC and for production of SiC filaments]
    Dipl.Chem, Karlsruhe, January 1979.
  2208. Hisashi Heguri
    Modeling and numerical analysis of geometrically non linear composites with incompressibility constraint
    PhD, University of Michigan, 1995.  AADAAI9542855  DAB56(8)4541
  2209. AR Heidari
    Finite element analysis of composite panels.
    Masters, Cincinnati, 1984.
  2210. RA Heidgerken
    The design of a test procedure for the measurement of acoustic damping of materials at low stress
    Masters, NPS Monterey, September 1983. AD A132 701. N84-28113.
  2211. Anneliese Dorothy Heiner
    Finite element design of a mechanical testing method for polymer composite femoral stems
    PhD, Case Western Reserve University, 1995.  AADAAI9534560  DAB56(6)3315
  2212. SM Heinrich
    Stress interference in axisymmetric torsion of a transversely isotropic body
    PhD, UIUC, 1985. DA8521786.
  2213. Michael Steven Heise
    Analysis of chemistry-property relations in complex epoxy resin systems
    PhD, Syracuse, 1989. DA8919519. DAIB 50(6)2433.
  2214. DJ Heitkamp
    Surface characteristics of composite resins
    Masters, Iowa, 1981.
  2215. Scott Lewis Heitmann
    Materials and process evaluation to determine the best combination for use in a composite mountain bike handlebar
    MSEng, University of Massachusetts at Lowell, 1994.  AAD1357066  MA32(5)1456
  2216. H-P Heitmeier
    Thesis, Kassel, 1984.
  2217. TR Helail
    Non-Newtonian flow in porous media
    PhD, Bradford, December 1978.
  2218. JD Helfinstine
    Two approaches to yielding of fibre reinforced composite materials
    PhD, Cornell, 1972. DA7223877.
  2219. K Hellbom
    Interlaminar strength of fibrous composites.
    Licentiate, KTH Stockholm, 1984. KTH-Report-84-9.
  2220. M Heller
    Fatigue life enhancement and damage assessment of cracked aircraft structures
    PhD, Melbourne, 1989.
  2221. JF Helmer
    Transverse properties of anisotropic fibres and their composites
    MSc, RPI, August 1983.
  2222. Johan Helsing
    Models for conduction and estimates of conductivity in composite materials
    TeknDr, Kungliga Tekniska Hogskolan - Sweden, 1991.  AADC274423  DAIC54(1)328
  2223. JB Henderson
    An analytical and experimental study of the pyrolysis of composite ablative materials
    Masters/PhD, Oklahoma SU, 1980. N81-28175. DA8113314.
  2224. Hendrix
    Veranderung von Polyesterfasern durch chemische Behandlung und Warmeeinwirkung
    [Changes to polyester fibre by chemical and thermal processing]
    Dissertation, RWTH Aachen, 1959.
  2225. DJ Hendy
    The influence of added damping on sound generated by vibrating sandwich plates
    PhD, Southampton, 1987. DAIC 49/0631.
  2226. DR Henley
    An investigation of polyesters with variable optical and mechanical properties for use in photomechanics
    Masters, UIUC, 1970.
  2227. JCF Hennemann
    Effect of prebuckling deformations on buckling of laminated composite circular cylindrical shells
    PhD, S.Methodist @ Dallas, June 1975. DA7529143.
  2228. RG Henning
    Growth parameters of tin metal whiskers produced by pressure
    Masters, Utah, August 1963.
  2229. P Henrat
    Caracterisation du comportement mecanique et l'emission acoustique de stratifies en traction uniaxiale monotonique [Mechanical loading and acoustic emission of laminates in static axial tension]
    DIng, INPL Nancy, 27 October 1986.
  2230. RE Henrichsen
    Dynamic torsional response of individual carbon fibre
    PhD, University of Washington-WA, 1976. DA7625416.
  2231. MS Henriksen
    The effect of thermal cycling, vacuum baking and related failure mechanisms on the coefficient of thermal expansion of graphite fibre reinforced composite laminates
    Masters, California: Irvine, 1981.
  2232. EJ Henriquez
    Optimum design and creep relaxation of multilayer high pressure vessels made from dissimilar materials
    Masters, Louisiana SU, 1980.
  2233. MF Henry
    Fracture in a directionally solidified Ni(Cr)-TaC fibrous eutectic under monotonic and cyclic loading
    PhD, RPI, September 1974. DA7505358.
  2234. JA Henry
    Deck-girder systems for highway bridges using fibre reinforced plastics
    Masters, NCSU, 1985.
  2235. TC Henry
    Grasping devices for fibreglass reinforced polymer rods
    Masters, Arkansas, 1986.
  2236. JM Henshaw
    A framework and tools for early decisions in the product development process
    Doctorate, Delaware, December 1989.
  2237. MC Henson
    Effect of external stress on moisture diffusion in an epoxy resin and its composite material
    Masters, TA&MU, May 1986.
  2238. RB Henstenburg
    Methods for approximating the probability of failure of parallel filament composites with hexagonal packing
    MSc, Cornell, 1984.
  2239. Robert Brown Henstenburg
    A Monte Carlo simulation of the single-filament composite test
    PhD, Cornell, 1988. DA8821222. DAIB 49(8)3394.
  2240. PGM Heppel and EC Leaver
    Construction and testing of a carbon fibre primary structure for a man-powered aircraft wing
    BS, Bristol, June 1977. BU-208. N78-14043.
  2241. J Her
    Thermal history effects on tensile properties and fracture toughness of neat polyarylene sulphide 2
    MS, Texas @ Arlington, 1989.
  2242. Shiuh Chuan Her
    Fracture mechanics of interface cracks between dissimilar anisotropic materials
    PhD, UCLA, 1990. DA9017661. DAIB 51(2)855.
  2243. Kulothdeepthi Ravindra Bandara Herath
    Constitutive equations for fully bonded metal matrix composites
    PhD, University of California - Santa Barbara, 1992.  AAD9303191  DAIB53(9)4903
  2244. PF Herbert
    Moisture induced swelling in graphite/epoxy composites.
    Masters, RPI, 1981.
  2245. FS Hering
    Nonlinear viscoelastic behaviour of some polymers and their composites
    Masters, NPS Monterey, 1968.
  2246. RJ Herman
    Postbuckling behaviour of graphite/epoxy cloth shear panels with 45'-flanged lightening holes
    MS, NPS Monterey, March 1982. AD A118 272. N83-11518.
  2247. PC Hermann
    The effects of polyurethane varnish as an intermittent bonding agent on mechanical properties of Kevlar-epoxy composites
    BE, Sydney-Australia, November 1982.
  2248. F Hermans
    Methode van de randintegralen, toegepast op elasticiteits problemen
    [Boundary integral method applied to elasticity problems]
    Afstudeerwerk, VUB Brussels, 1981. KVIV Prijs.
  2249. MF Hermsen
    Collapse of composite cylindrical panels with various cut-out locations considering material degradation.
    Masters, AFIT, March 1986. AFIT/GAE-86M2. AD A172 440. N87-16357.
  2250. N Hernandez
    Analysis of axisymmetrically loaded shells of revolution
    Masters, Alberta, 1983.
    >>> JS Hernandez, see J Sandoval-Hernandez.
  2251. J-J Herque
    Etude de l'oxydation anodique des fibres de carbone. Evolution de leurs proprietes et de leur comportement dans un materiau composite [Anodic oxidation study of carbon fibres. Development of the properties and loading in composite materials]
    Dissertation, Haut-Rhin, 1975.
  2252. PJ Herrera-Franco
    A study of mechanically fastened composite using high sensitivity interferometric moire technique
    PhD, Michigan SU, 1986. DA8625031.
  2253. Paul Douglas Herrington
    Fatigue failure of composite bolted joints
    PhD, Louisiana SU & A&M Coll, 1991. DA9219543. DAIB 53(2)1027.
  2254. Douglas Jacob Herrmann
    Fatigue crack growth in unidirectional and cross-ply SCS-6Ti metal (RTM) 21S titanium matrix composite
    PhD, Purdue University, 1994.  AADAAI9512985  DAB55(12)5531
  2255. FC Herzner
    Ring-reinforced, orthotropic, circular cylindrical shell under hydrostatic pressure
    Masters, PINY Brooklyn, 1965.
  2256. RB Heslehurst
    Evaluation of techniques for damage analysis of composite aircraft structures
    MEng, Royal Melbourne IT, to be submitted in 1989.
  2257. F Hesselt
    Untersuchungen uber den Einfluss der Werkstoffkomponenten auf die Gebrauchseigenschaften von glasfaserverstarkten Kunststoffen
    [Investigation of raw material flow in commercial shafts of glass fibre reinforced plastics]
    Dissertation, TH Aachen, 1969.
  2258. Nathan Donald Hesterman
    A flexure model and strength properties of vertically glue-laminated composites
    PhD, University of Idaho, 1992.  AAD9312461  DAIB53(12)6075
  2259. DW Hetzner
    Anisotropic tensile and notched bend properties of an Al-Al3Ni directionally solidified fibre reinforced composite
    PhD, Tennessee, 1980. DA8018481.
  2260. TO Heumann
    Elastic properties and failure mechanisms in hybrid composites with differing resin matrices
    PhD, Loughborough, 1987. DX81050.
    >>> RL Hewitt, see MAO Fox.
  2261. PR Heyliger
    Frictional phenomena in planar elastic contact stress problems
    PhD, VPI&SU, 1986.
  2262. M Heym
    Unidirektional faserverstaerkte verbundkorper fur Andwendungen bei erhohter Temperatur
    [Unidirectional fibre reinforced composites for application at elevated temperatures]
    Dipl.Chem, Karlsruhe, December 1976.
  2263. DB Hiatt
    Fracture of prenotch unidirectional glass-fibre reinforced composites
    S.M, MIT, August 1970.
  2264. Michael Frank Hibbs
    Microscopic delamination processes & the resulting crack tip strain fields of graphite/epoxy composites
    PhD, TA&MU, 1988. DA8903353. DAIB 49(11)4979.
  2265. Jeffrey Scott Hidde
    Notch sensitivity of ARALL (RTM) laminates
    PhD, Virginia, 1990. DA9023484. DAIB 51(5)2446.
  2266. CC Hiel
    The nonlinear viscoelastic response of resin matrix composites
    Doctoral thesis, VUB-Brussels, January 1983. VPI-E-83-6, March 1983
  2267. JE Higgins
    Finite element analysis of random fibre composite systems
    Masters, Vanderbilt, 1974.
  2268. DE Higgins
    Synthesis and characterisation of some alkyds for unsaturated polyester resins
    PhD, Loughborough, April 1979.
  2269. Edward Donald Higgins
    The strength of bonded wood strand composites
    PhD, UBC Vancouver, 1990. DA-NN63886. DAIB 52(10)5053.
  2270. PJ Highmore
    Ultrasonic nondestructive testing of multilayered media
    PhD, Loughborough, December 1973. D10210/74.
  2271. AL Highsmith
    Stiffness reduction resulting from transverse cracking in fibre reinforced composite laminates
    MSc, VPI&SU, August 1981.
  2272. AL Highsmith
    Damage induced stress redistribution in composite laminates
    PhD, VPI&SU, December 1984. DA8507188. N85-35235.
  2273. Lloyd Hiromi Hihara
    Corrosion of aluminium matrix composites
    PhD, MIT, 1989. DA-379827.
  2274. Y Hikami
    Transverse vibrations of laminated orthotropic plates.
    Masters, UCLA, 1969.
  2275. Y Hikami
    Experimental study on inertia excited vibrations of square plates
    MS, CWRU, 1969.
  2276. F Hikami
    Strength theories of continuous and discontinuous fibre composites
    PhD, Delaware, June 1983. DA8324101. N84-15195.
  2277. RAM Hikmet
    Studies of adsorption entanglement layers of high-modulus high-strength tapes and fibres of polyethylene.
    PhD, Bristol, 1986. ASLIB 36(3)6830.
  2278. Francois Michel Hild
    Ultimate strength of structures made of fiber-reinforced ceramic-matrix composites
    PhD, University of California, Santa Barbara, AADAAI9534206  DAB56(6)3400
  2279. J Hildago
    Behaviour of orthotropic layered cylinders
    Masters, MIT, 1972.
  2280. MS Hilditch
    Studies in monomer and [PEEK/PDMS block co-] polymer synthesis
    MPhil, CNAA: Humberside CHE, 1990. ASLIB 39(3)6478.
  2281. A Hilgenberg
    Beitrag zur bemessung von baukonstruktionen aus kunststoffen unter besonderer berucksichtigung der windbelastung
    [Contribution to the measurement of plastics structures with special consideration of the winding loads]
    Dissertation, TH Aachen, 1974.
  2282. JE Hill
    Experimental threedimensional analysis of residual stresses around fibre inclusions in epoxy
    PhD, Cornell, 1967. DA6800658.
  2283. KA Hill
    Microstructure and joining of Ni-Ni3Nb unidirectionally solidified eutectic composite
    Masters, Lehigh, 1973.
  2284. Stephen C Hill
    A theory for predicting and minimizing the effects of matrix degradation on the thermomechanical properties of general laminates
    PhD, Rensselaer Polytechnic Institute, 1993.  AAD9420328  DAIB55(3)1019
  2285. EA Hille
    Faserwickeltechnik-methoden zur herstellung geometrisch komplizierter Bauteile
    [Filament winding technique for producing complicated geometry]
    Doctorate, RWTH-Aachen, 1981. DS8102.
  2286. Donald Denis Himbeault
    Coating of carbon fibres with refractory carbides for metal matrix composites
    PhD, Waterloo - Canada, 1989. DA-566046. DAIB 50(8)3654.
  2287. PJ Hine
    Fracture behaviour of polyethersulphone
    PhD, Leeds, 1982.
  2288. RL Hinrichsen
    Nonlinear analysis of thick composite plates using a cubic spline function
    PhD, AFIT @ WPAFB, September 1984.
    AD A152 115. AFIT/DS/AE/84-2. N85-27268. DA8502742. N85-27252.
  2289. MJ Hinton
    The elastic properties of filament wound GRP tubes
    MSc, London: City, 1978.
  2290. YL Hinton
    Ballistic impact resistance of fibre reinforced high density polyethylene
    Masters, MIT, 1980.
  2291. IC Hipkins
    Study in glass and fibre reinforced polyester composites with particular emphasis on advanced fibre, sheet moulding compounds and including a regional GRP industry survey
    MSc, Strathclyde, 1981.
  2292. H Hirakawa
    The effect of shear resistance upon the bending of a composite beam
    Masters, Akron, 1969.
  2293. Yasuo Hirano
    Nonlinear vibrations of composite material shells
    PhD, Delaware, 1988. DA8824218. DAIB 49(8)3395.
  2294. Deidre Ann Hirschfeld
    Failure analysis of notched graphite-epoxy tubes
    PhD, VPI&SU, 1990. DA9028047. DAIB 51(5)2560.
  2295. WA Hitchcock
    The effect of transverse shear strain on laminated curved beams
    PhD, TA&MU, 1980. DA8101603.
  2296. Sally A Hitchen
    Modulus reduction and damage accumulation during the fatigue of a glass/nylon composite
    PhD, Surrey, 1991. DX94955.  DAIB 52(11)6024.
  2297. Selim Salim Hiziroglu
    Swelling stresses and deformations in wood composites
    PhD, Michigan SU, 1989. DA9012000. DAIB 50(12)5416.
  2298. RA Hlavacek
    Fatigue failure of graphite fibre reinforced nylon.
    Masters, Connecticut, 1975.
  2299. CH Ho
    Shear damping of sandwich plate
    Masters, PINY Brooklyn, 1966.
  2300. T-L Ho
    Continuum theory for composite materials
    PhD, Rice, 1974. DA7421279.
  2301. SMT Ho
    Friction and wear properties of nylon and glass filled nylon on steel
    BE, Sydney-Australia, November 1982.
  2302. DST Ho
    Effect of chain length on retention of polyester mechanical properties in water
    MPhil, CNAA: Kingston, 1983.
  2303. YS Ho
    The electrical properties of aluminium-filled polyester composite in the microwave frequency range
    Masters, Delaware, 1986.
  2304. K-I Ho
    An anisotropic continuum damage model for creep-dominated, multi-axial loading histories
    PhD, Georgia IT, 1987. DA8803701.
  2305. Chi-Ting Ho
    Bromination of carbon fibres and carbon-carbon composites
    PhD, SUNY Buffalo, 1990. DA9033704. DAIB 51(8)4007.
  2306. Henjen Ho
    An evaluation of the Iosipescu specimen for composite materials shear property measurement
    PhD, VPI&SU, 1991. DA9200418. DAIB 52(7)3856.
  2307. Raymond Ho
    Buckling of anisotropic cylinders under axial compression, lateral pressure and torsion
    MASc, University of Toronto, 1991.  AADMM74405  MA31(3)1280
  2308. Shrwai Ho
    Mechanics of cracking for composite material
    PhD, University of California - Santa Barbara, 1992.  AAD9317170  DAIB54(2)1047
  2309. Teck Tuak Ho
    Analysis of distortional buckling in continuous composite beams
    PhD, University of Nottingham, 1992.  AADC359675  DAIC55(3)965
  2310. Chengter Ted Ho
    An investigation of sink mark formation in compression molding of polymeric composites
    PhD, Ohio State University, 1993.  AAD9316167  DAIB54(2)1030
  2311. Phuong Huy Hoang
    Stress distribution at a three dimensional singularity in anisotropic materials and composites
    PhD, Illinois @ Chicago, 1990. DA9104461. DAIB 51(9)4436.
  2312. WT Hobson
    The strengthening mechanism of short glass fibre reinforced plastic foam
    Masters, Oklahoma SU, 1980.
  2313. Hong Ho-Cheng
    An analysis of drilling of composite materials
    PhD, California: Berkeley, 1988.  DA8916702.  DAIB 50(4)1610.
  2314. Joanne Hodges
    Residual thermal stresses in carbon fibre reinforced plastics for aerospace applications
    PhD, Salford, 1988. D83042. DAIB 49(8)3227. ASLIB 38(1)0925.
  2315. I Hodgson
    The flow of polyvinyl acetate on glass fibre surfaces.
    PhD, Bradford, 1971!.
  2316. KT Hodgson
    The role of single fibre wettability in wicking in fibre networks
    PhD, University of Washington-WA, 1986. DA8706584.
  2317. JH Hoey
    Thermoplastic foil coatings for SMC
    MPhil, Loughborough, 1985.
  2318. W Hoffmann
    Blattfeder aus GFK [GFRP leaf spring]
    Diplomarbeit (not dissertation), IKV-Archiv-Nr-D8335, 1983!.
  2319. P Hoffmann
    Influence des proprietes de la surface des fibres sur les caracteristiques mecaniques de composites unidirectionnels carbone/epoxy
    [Influence of fibre surface properties on the mechanics of unidirectional carbon-epoxy]
    DIng, Lyon, 1985.
  2320. PJ Hogg
    The stress corrosion of glass reinforced plastics
    PhD, Liverpool, 1981.
  2321. Ka-Pi Hoh
    Multinuclear NMR spectroscopic and proton NMR imaging studies of the silane coupling agent/epoxy resin interface in composites
    PhD, CWRU, 1989. DA8915639. DAIB 50(5)2137.
  2322. Mark Allen Hoisington
    Process/property interrelations of layered structured composites
    PhD, University of Washington, 1992.  AAD9312684  DAIB54(1)362
  2323. Mehdi Hojjati
    Curing of thick thermosetting composites:  experiment, simulation, and scaling
    PhD, Concordia University, 1994.  AADAAINN97580  DAB56(7)2961
  2324. RK Holbert
    On the thermal cycling of aluminium matrix composite materials
    Masters, Tennessee @ Knoxville & Tullahoma, 1975.
  2325. Andrew Mark Holden
    Multiple live-feed moulding of fibre reinforced thermoplastics
    PhD, Brunel, 1990. DX95887. DAIB 53(2)1015.
  2326. AW Holdsworth
    Fracture toughness of glass reinforced plastics
    PhD, Nottingham, 1975!.
  2327. I Holehouse
    Sonic fatigue design techniques for advanced composite airplane structures
    PhD, ISVR Southampton, 1984. D53077/85.
  2328. LC Hollaway
    Photoelastic and finite-element studies of the elastic stresses in two-dimensional composites
    PhD, London: UC, 1970.
  2329. K Hollinsky
    Querzugbelastbarkeitserhohung von Brettschichtholz mit in Reaktionsharz eingeleimten glasfaserverstarkten Polyesterstaben [Increase of the tensile loading capacity perpendicular to the grain of glued laminated timber with normal to grain in-reaction gums in glued fibreglass]
    DrTechn, TU Wien, 1985.
  2330. J Hollis
    Press forming of thermoplastic matrix composites
    Masters, CSULB, 1987.
  2331. SJ Hollowell
    Aeroelastic flutter and divergence of graphite/epoxy cantilevered plates with bending-torsion stiffness coupling
    Masters, AFIT WPAFB, January 1981. AFIT-CI-80-67T. AD A101 726.
  2332. K Hollmann
    Acoustic emission behaviour of epoxies under tensile loading
    MS, Washington University-MO, December 1983.
  2333. Kaj Hollman
    Computational damage mechanics for advanced composites
    Tekn.dr, KTH Stockholm, 1989. DA-150267. DAIC 51(4)644.
  2334. BS Holmes
    Experimental study of shock waves in fibre reinforced composite materials
    PhD, Drexel, 1971. DA7125649.
  2335. Gale Antrus Holmes
    Understanding molecular and macroscopic relaxation processes in model epoxy resins:  theoretical and practical aspects
    PhD, Texas A&M University, 1994.  AAD9506648  DAIB55(10)4550
  2336. Paula Jeanne Holmes
    Interfacial properties of silicon carbide fiber reinforced reaction-formed silicon carbide matrix composites
    PhD, Worcester Polytechnic Institute, 1995.  AADAAI9533777 DAB56(6)3387.
  2337. NL Holt
    Fatigue and fracture of high strength filaments
    PhD, California: Berkeley, 1975. DA7615074. N76-28361.
  2338. RE Holtzapple
    Axisymmetric buckling of sandwich conical panels.
    Masters, Tulsa, 1969.
  2339. RP Holzer
    Space environmental simulation with in-situ composite material evaluation
    Masters, Toronto, 1979.
  2340. JF Holzgraf
    The characterisation of the matrix of brittle matrix composites.
    MS, California: Berkeley, December 1970. UCRL-20388. N71-26986.
  2341. Somsak Homdee
    Fatigue damage of the 20% silicon carbon(w)-606L-aluminum metal matrix composite
    PhD, University of Utah, 1995.  AADAAI9519218  DAB56(1)487
  2342. CC Hong
    The computation of stress intensity factors in dissimilar materials using a contour integral method
    Masters, Texas @ Austin, 1976.
  2343. C-S Hong
    Dynamic mechanical behaviour of composite materials under sustained sinusoidal stresses
    PhD, Pennsylvania SU, 1977. DA7803331.
  2344. CH Hong
    Aeroelastic stability of composite rotor blades in hover.
    PhD, Maryland, 1985. DA8608813.
  2345. DC Hong
    Transport in a two component randomly composite material.
    PhD, Boston, 1986. DA8602736.
  2346. CH Hong
    Finite element approach to the dynamic analysis of composite helicopter blades
    PhD, RPI, 1987. DA8808167.
  2347. Soon-Jo Hong
    A consistent shear deformable theory for the vibration of laminated plates
    PhD, Ohio SU, 1988. DA8824524. DAIB 49(9)3900.
  2348. Bor Zen Hong
    Inelastic analysis of laminated composites
    PhD, RPI, 1989. DA9018429. DAIB 51(1)384.
  2349. Seongho Hong
    Central delamination in glass/epoxy laminates
    PhD, Michigan SU, 1990. DA9102682. DAIB 51(10)4989.
  2350. Tayo Steve Hong
    Analysis and fabrication of paraboloidal CFRP sandwich mirrors
    PhD, Arizona, 1991. DA9200037. DAIB 52(7)3857.
  2351. Wei Hong
    Analysis of pressureless densification of ceramic matrix composites
    PhD, University of Missouri - Rolla, 1993.  AAD9326595  DAIB54(4)2051
  2352. Julie Anne Hood
    Fracture estimation in [seismic] anisotropic media
    PhD, Hawaii, 1990. DA9030563. DAIB 51(5)2252.
  2353. RJ Hooker
    High damping materials
    PhD, Southampton, 1975.
  2354. DM Hoon
    A determination of the 0' elastic moduli and compressive allowable strength for 2-ply 0/90' graphite/epoxy laminate
    Masters, MIT, 1976.
  2355. SJ Hooper
    Static analysis of a laminated composite beam exhibiting bending-stretching coupling
    Masters, Wichita SU, 1979.
  2356. WR Hoover
    The low cycle fatigue behaviour of unidirectionally solidified aluminium-aluminium nitride eutectic alloy
    Masters, Lehigh, 1968.
  2357. MC Hope-Gill
    The ultimate strength of continuous composite beams
    PhD, Cambridge, 1973-74.
  2358. AK Hopkins
    On the response of mixed materials to one-dimensional shock waves
    Masters, AFIT, 1970.
  2359. T Hopkins
    Interactions of liquids with fibre assemblies.
    MSc, UMIST, April 1984. D74910/87.
  2360. DA Hopkins
    Nonlinear analysis for high temperature multilayer fibre composite structures
    Masters, NASA Lewis RC, August 1984. NASA-TM-83754. N85-21273.
  2361. Christopher Paul Ritchey Hoppel
    Analysis of the fatigue behavior of short glass fiber reinforced thermoplastics using acoustic emission
    PhD, Pennsylvania State University, 1993.  AAD9326863  DAIB54(6)3286
  2362. J Hopper
    Probabilistic design using numerical optimisation.
    Masters, NPS Monterey, October 1982.
  2363. BA Horban
    Effects of through the thickness delaminations on curved composite panels
    Masters, AFIT, December 1985. AFIT/GAE/AA/85D-8. AD A164 110. N86-25853.
  2364. NM Hosangady
    A molecular composite approach to mechanical property prediction for polyethylene
    MS, Washington University-MO, 1984.
  2365. M Hoskote
    The effects of frequency and stacking sequence on the fatigue behaviour of unnotched quasi-isotropic graphite-epoxy laminates
    Masters, RPI, 1979.
  2366. R Hothersall
    A study of the crosslinking of epoxy resins.
    MPhil, CNAA: Hatfield & Herts.College.Build, 1982.
  2367. Michel Houde
    Impact force model for composite materials
    MASc, University of Toronto, 1990.  AADMM65558  MA30(4)1453
  2368. WW Houghton
    Acoustic emission: a novel technique for monitoring the composite curing process
    MS, Lowell & AMMRC Watertown, 15 May 1980. UMI 13-15894.
  2369. WR Houghton
    Bonding of graphite reinforced thermoplastics using resistance heaters
    S.bl.1 thesis, MIT, 1984.
  2370. MC Hourani
    Membrane theory for nonhomogeneous, anisotropic laminated shells of revolution
    Masters, Rose-Hulman IT, 1982.
  2371. LJ House
    A study of interfacial reactions in silicon carbide reinforced titanium
    Thesis, Florida SU, 1979.
  2372. LJ House
    A study of interfacial reactions in silicon carbide reinforced titanium
    Masters, GWU, May 1979.
  2373. Larry Dale Houser
    An experimental study of temperature effects on the impact resistance of composite materials
    EdSpec, Central Missouri SU, 1991. MA1345965. MA 30(1)17.
  2374. PJ Hovde
    Branntekniske egenskaper hos glassfiberarmert unmettet polyester (GUP) og polyvinylklorid(PVC) med og uten tilsetningstoffe [Pyrotechnical properties of glass fibre reinforced polyester and PVC and the effect of some additives and fillers]
    Dr.Ing, Trondheim, 1977.
  2375. MA Howard
    Constant temperature creep studies of simple polymer composites
    Masters, NPS Monterey, 1967.
  2376. SA Howard
    Stability of delaminated composite material plates.
    Masters, Delaware, 1978.
  2377. RC Howard
    Some aspects of [paper] fibre bonding
    PhD, UMIST, June 1984. D67650/86.
  2378. James Daniel Howard
    Laser machining of polymeric composites for joint preparation
    MS, Michigan State University, 1993.  AAD1352717  MA31(4)1906
  2379. RJ Howe
    Cumulative damage of a glass reinforced plastic
    PhD, Nottingham, 1971.
  2380. LJ Howell
    A viscoelastic analysis of filament reinforced structures
    Masters, UIUC, 1968.
  2381. RD Howell
    Effects of ply damage on failure of composite laminates containing a circular hole
    Masters, Utah, 1983.
  2382. BV Howes
    High modulus organic fibre reinforced polysulphone
    PhD, CNAA: Thames/MOD-PERME, 1980. D31970/80.
  2383. JC Howes
    Interfacial strength development in thermoplastic resins and fibre reinforced thermoplastic composites
    MS, VPI&SU, 1987.
  2384. CP Hsiao
    The propagation of acoustic emission signals in polymeric media
    PhD, Oklahoma, 1988.
  2385. TJ Hsieh
    <metal matrix composites>
    Masters, Maryland, 1985.
  2386. K-T Hsieh
    Modelling of cord-reinforced rubber laminates.
    PhD, Texas @ Austin, 1985. DA8609516.
  2387. Alex Jer-Yann Hsieh
    Solvent stress cracking and failure mechanisms in polyetherimide composites
    PhD, MIT, 1989. DA-379831.
  2388. Chung-Yu Hsieh
    Dynamic study of energy loss mechanisms during ballistic impact of polymer composites
    PhD, Auburn, 1992. DA9225358. DAIB 53(4)2010.
  2389. Fu-Ken Hsieh
    Fracture behavior of notched continuous fiber boron/aluminum metal matrix composite
    PhD, West Virginia University, 1994.  AAD9427966  DAIB55(6)2360
  2390. H Hsiung
    Thermal analysis of a filament wound composite during cure
    Masters, Nebraska, 1988.
  2391. Hahnjong Hsiung
    Freeze-drying method for making semi-interpenetrating polymer networks and their fiber reinforced composites
    PhD, University of Tennessee, 1993.  AAD9421639  DAIB55(3)1038
  2392. W Hsu
    Optimum design of orthotropic plates
    Masters, Tufts, 1965.
  2393. AT Hsu
    Finite deformation of a fibre wrapped cylindrical shell.
    Masters, West Virginia, 1970.
  2394. LC Hsu
    Cracks in dissimilar media subjected to in-plane loading.
    Masters, Stanford, 1973.
  2395. PW Hsu
    Interlaminar stresses in composite laminates- perturbation analysis
    PhD, VPI&SU, 1976. DA7617097.
  2396. W-HE Hsu
    Analysis of elastic behaviour of orthotropic wood composite plates
    PhD, Washington SU, 1978. DA7811896.
  2397. PT Hsu
    Interactions between moving yarn and solid surface
    Masters, MIT, 1979.
  2398. YS Hsu
    Thermal stress analysis of composite plates and shells by finite element methods
    Masters, Oklahoma, 1980.
  2399. PT Hsu
    Fracture mechanisms of synthetic fibre ropes
    PhD, MIT, 1983.
  2400. TL Hsu
    Finite element analysis of the FRP fluid storage tanks.
    Masters, NCSU Raleigh, 1983.
  2401. HC Hsu
    Thermodynamics and transport phenomena in stress polymeric systems
    Masters, UCLA, 1984.
  2402. PL Hsu
    Stress corrosion effects on aligned short fibre composite materials
    MS, Delaware, August 1984.
  2403. FJ Hsu
    Elastic-plastic deformation of unidirectional fibre reinforced composites
    Masters, Texas @ Austin, 1988.
  2404. Jen-Yan Hsu
    Fabrication and properties of monolithic and silicon carbide fibre-reinforced lithium oxide-aluminium oxide-6 silicon dioxide glass ceramic composites
    PhD, Alfred, 1990. DA9110436. DAIB 51(11)5528.
  2405. Meng-Bor Hsu
    The effect of ductile innerlayers on the mechanical performance of fibre-reinforced composite materials
    DSc, Washington Univ - MO, 1990. DA9114714. DAIB 51(12)6051.
  2406. Su-Yuen Hsu
    Finite element micromechanics modeling of inelastic deformation of unidirectionally fiber-reinforced composites
    PhD, Virginia Polytechnic Institute and State University, 1992.  AAD9306156  DAIB53(10)5283
  2407. Shen-An Hsu
    Unidirectional silicon carbide fiber-reinforced aluminum nitride composites
    MS, University of Massachusetts - Lowell, 1993.  AAD1354380 MA32(2)661
  2408. Bin-Lin Hsu
    Structure property relationships of aromatic polyimides for toughening epoxy resin
    PhD, University of Akron, 1995.  AADAAI9544101  DAB56(8)4348.
    >>> P Hsu, see Po H.
  2409. PA Hsueh
    Large deflection of orthotropic rectangular panels.
    Masters, Massachusetts, 1969.
  2410. ES Hsuie
    Lightweight automotive composite materials
    PhD, Michigan, 1982. DA8224968.
  2411. GS Hu
    Improvements in the strength predicion of notched composites.
    PhD, RPI, June 1985.
  2412. T-HG Hu
    Improving strength prediction for advanced composite material with stress concentration
    PhD, RPI, 1985. DA8528661. N86-23655.
  2413. WC Hu
    Glass fibre reinforced polycarbonate composites
    Masters, Missouri-Rolla, 1987.
  2414. Shoufeng Hu
    Dynamic delamination propagation in composite beams under impact
    PhD, Florida, 1990. DA9106424. DAIB 51(10)4915.
  2415. Baogang Hu
    Finite element analysis of damped vibrations of laminated composite plates
    PhD, McMaster University - Canada, 1993.  AADNN84928  DAIB54(12)6419
  2416. T-A Huang
    Stress concentration due to circular hole in laminated composite plates
    Masters, Nebraska, 1972.
  2417. C-Y Huang
    Plastic relaxation around crack tip in composite material
    PhD, New Mexico, 1974. DA7518652. N75-32176.
  2418. C-H Huang
    Stress distributions around holes in laminated composite plates
    PhD, VPI&SU, 1975. DA7523701.
  2419. PH Huang
    Post-crazing stress-strain response of glass/epoxy laminates
    Masters, Tennessee TU, 1979.
  2420. DD-J Huang
    Tensile fatigue of short fibre reinforced composites.
    ScD, MIT, 1981.
  2421. Y-H Huang
    Mechanics of unidirectional fibre reinforced composites.
    PhD, S.California, 1983.
  2422. F-Y Huang
    Two- and three-dimensional isoparametric finite elements for micropolar elasticity
    DEngSc, New Jersey IT, 1986. DA8701906.
  2423. NN Huang
    Thermal elastic buckling and large deformation behaviour of rectangular angle-ply laminated plates
    MS, Kentucky, 1986.
  2424. DD Huang
    Expert system for composite material based pressure vessel design
    Masters, California: Davis, 1988.
  2425. Qian Huang
    Three-dimensional composite finite element for stress analysis of anisotropic laminate structures
    PhD, Concordia, 1989. DA-567452. DAIB 51(2)940.
  2426. Nan-Nong Huang
    Nonlinear thermoelastic analysis of laminated plates and shells
    PhD, Kentucky, 1990. DA9023339. DAIB 51(4)1913.
  2427. Jong-Shin Huang
    Foam core materials for structural sandwich panels
    PhD, MIT, 1991. DA-0571027. DAIB 52(10)5419.
  2428. Xiaogang Huang
    On a modelling approach for damages in ceramic-matrix composites
    PhD, Drexel, 1992. DA9220955. DAIB 53(3)1556.
  2429. Jianzhong Huang
    Structural relaxation in thin glass fibers
    PhD, Ohio State University, 1992.  AAD9307781  DAIB53(11)5919
  2430. Yimei Huang
    Some theoretical and experimental aspects of surface waves for elastic constant determination
    PhD, Drexel University, 1992.  AAD9311799  DAIB53(12)6505
  2431. Yu-Wei Huang
    Damage progression in laminates with in-plane stress gradient
    MS, University of Texas at Arlington, 1992.  AAD1351735  MA31(3)1281
  2432. Chien-Ming Huang
    Finite element formulation for gauge theory of brittle damage with applications to fibrous composites
    PhD, Rensselaer Polytechnic Institute, 1993.  AAD9405677  DAIB54(9)4879
  2433. Hae-An Huang
    Nondestructive evaluation of elastomer matrix composites
    PhD, Pennsylvania State University, 1993.  AAD9334752  DAIB54(7)3700
  2434. Kuan Hong Huang
    Three-dimensional free vibration analysis of thick, arbitrarily laminated, rectangular, cylindrical and spherical composite panels
    PhD, University of Maryland, 1993.  AAD9327430  DAIB54(5)2585
  2435. Qixin Huang
    Characterization of acoustic emission from failure processes of carbon fiber/epoxy composites by pattern recognition
    PhD, University of California - Los Angeles, 1993.  AAD9321904  DAIB54(3)1605
  2436. RF Hubbard
    Generic buckling curves for a class of uniaxially loaded specially orthotropic rectangular plates
    Masters, RPI, 1987.
  2437. AT Huber
    Anisotropy of cellular materials
    Masters, MIT, 1987.
  2438. Robert David Huber
    Optical detection of stress waves from glass fiber reinforced polymer matrix composite material
    PhD, Johns Hopkins University, 1994.  AAD9419987  DAIB55(3)1123
  2439. Pascal Hubert
    Comportement a la rupture de composites pultrudes sous un chargement dynamique
    MScA,  Ecole Polytechnique Montreal - Canada, 1991.  AADMM69609  MA31(1)420
  2440. RE Hubka
    Finite difference analysis of large axisymmetric deformation of thin orthotropic shells of revolution
    Masters, University of Washington-WA, 1966.
  2441. J Huddart
    The compressive strength of fibre-reinforced plastics.
    PhD, London, 1975. D15431/76.
  2442. Claude Hudon
    Etude de degradation des resines epoxy sous l'action des decharges partielles
    PhD, Ecole Polytechnique Montreal, 1993.  AADNN90028  DAIB55(9)3955
  2443. C Huet
    Etude par une methode d'impedance du comportement viscoelastique des materiaux hydrocarbons
    [Impedance methods for viscoelastic loading of hydrocarbons]
    DIng, Paris, 1963.
  2444. DP Huffman
    The effect of lamina orientation on the stress concentrations in laminated composite plates
    Masters, Tulsa, 1973.
  2445. JW Huffman
    The design of fibre reinforced composite springs for an impact line printer
    MS, Idaho, 1985.
  2446. DA Hughes
    The strength and deformation of torispherical drumheads for glass reinforced plastic pressure vessels
    MSc, UMIST, 1980.
  2447. MS Hughes
    Application of local approximations to the Kramers-Kronig relations in ultrasonics [graphite/epoxy]
    PhD, Washington University-MO, 1987. DA8812758.
  2448. Francoise Hugot
    Thermal residual stress modeling and plastic behavior of metal matrix composites
    Do, Institut National des Sciences Appliques de Lyon, 1991.  AADC251945  DAIC53(4)786
  2449. FGAE Huguenin
    A mathematical model for kinetic- and diffusion- controlled curing reaction of epoxy-amine systems
    Masters, Delaware, 1984.
  2450. W Huh
    Blends of thermotropic liquid crystal polymer and thermoplastic polymer
    PhD, Connecticut, 1986.
  2451. Hong Wei Hui
    Optimization of laminate orientation to enhance failure properties
    MASc, University of Toronto, 1993.  AADMM83539   MA32(3)1043
  2452. David Brian Hull
    Mathematical theory of flow processes of fibre-reinforced materials
    PhD, University of Nottingham, 1992.  AADC360098  DAIC55(3)938
  2453. RC Hulsey
    Delamination fracture toughness of a unidirectional graphite/epoxy composite
    MS, TA&MU, December 1980. MM-3724-80-9.
  2454. Joseph A Hulway
    A model for the crush of polymer matrix composite tubes
    PhD, Michigan, 1991. DA9208561. DAIB 52(10)5356.
  2455. EA Humphreys
    Nonlinear analysis of bonded joints with thermal effects
    Masters, VPI&SU, 1977.
  2456. NP Humphris
    The effects of fatigue loading and stress concentration on carbon fibre reinforced plastic
    PhD, CNAA, 1977.
  2457. C-H Hung
    Stress distribution around holes in laminated composite plates
    PhD, VPI&SU, 1975. DA7523701.
  2458. Chinghua Hung
    The process design of three-dimensional open-die forging and the deformation analysis of metal matrix composites
    PhD, California: Berkeley, 1990. DA9126614. DAIB 52(4)2256.
  2459. Chang-Li Hung
    Response of mechanically fastened composite joints under multiple bypass loads (bearings)
    PhD, Stanford University, 1994.  AAD9422093  DAIB55(3)991
  2460. DH Hunt
    Crack propagation during fatigue of a composite material.
    Masters, MIT, 1970.
  2461. RT Hunt
    Analytical and experimental stress analysis of orthotropic cylindrical shells subjected to radial line loads
    Masters, Virginia, 1974.
  2462. MS Hunt
    Investigation into the use of composite materials for rotor craft rotors
    PhD, Nmeri Pretoria S.Africa, October 1977. CSIR-ME-1533. N78-30179
  2463. Edward Patrick Hunt
    Structure-property relationships in fibre-reinforced aluminium laminates and silicon carbide particulate aluminium composites
    PhD, University of Southampton, 1992.  AADC326294  DAIC55(1)293
  2464. SH Hur
    The analysis of thermal residual stress for metal matrix composites with aluminium/silicon carbide particles
    Masters, NPS Monterey, 1988.
  2465. AG Hurlbut
    Finite element modelling of crack growth and failure of composite laminates
    PhD, Clarkson, 1985. DA8514359.
  2466. RC Hurst
    The deformation of tubular aluminium/stainless steel wire composites by internal pressure
    MSc, UMIST, May 1969. D69918/86.
  2467. DA Hurwitz
    Krecasphere-polystyrene composites prepared via in-situ polymerisation techniques
    MS, Washington University-MO, 1972.
  2468. JF Huss
    On the compressive buckling of rectangular plates with advanced composite reinforced central longitudinal stiffeners.
    Masters, Stanford, 1972.
  2469. Manar Maher Hussein
    Dynamic characteristics of laminated elastic and piezoelectric solids
    PhD, Colorado State University, 1995.  AADAAI9535340  DAB56(6)3338
  2470. RJ Huston
    The fatigue of dough moulding compound and the strength of bolted joints
    PhD, CNAA: Kingston/Ford Motor, 1980.
  2471. KF Hutcheon
    The application of resin transfer moulding to the motor industry
    MPhil, Nottingham, 1989.
  2472. TJ Hutley
    Structure-property relationships in mineral filled thermoplastics
    PhD, Cranfield IT, 1988. DX82027. ASLIB 38(2)3311.
  2473. W Huttner
    Parameterstudie zur Herstellung von kohlenstoffaserverstaerkten Kohlenstoffverbundkorpern nach dem Flussigimpragnierverfahren [Study of manufacturing parameters for carbon/carbon composites by fluid impregnation technique]
    Dipl.Chem, Karlsruhe, February 1980.
  2474. YH Hwan
    An ultrasonic material state classifier for elastically anisotropic materials
    PhD, Drexel, 1987. DA8712927. In 2 volumes.
  2475. Luchen Hwan
    Preparation and characterisation of ceramic composites and coatings by chemical vapour deposition and chemical vapour infiltration
    PhD, Connecticut, 1990. DA9115576. DAIB 52(1)231.
  2476. D-G Hwang
    The proof testing and fatigue behaviour of graphite/epoxy laminate
    DSc, Washington University-MO, August 1982. DA8309542.
  2477. SL Hwang
    Finite element modelling of damping in discontinuous fibre composite materials
    Masters, Idaho, 1985.
  2478. Jin-Shun Hwang
    Research on the parameters of pultrusion process
    Masters, NTHU Taiwan, 1986.
  2479. W-C Hwang
    Three-dimensional finite element based iterative approach for analysis of laminated composites
    PhD, Florida, 1986. DA8716006.
  2480. Shwilong Jimmy Hwang
    Characterisation of the effects of three-dimensional states of stress on damping of laminated composites
    Masters/PhD, Idaho, 1988. DA8903472. DAIB 49(11)4988.
  2481. W Hwang
    Interlaminar fracture and damage of composite materials
    PhD, SUNY Buffalo, 1988. DA8812344. DAIB 49(7)2814.
  2482. CR Hwang
    <PZBT fibres>
    PhD, Massachussetts, 1989.
  2483. Jeff Jyi-Faa Hwang
    Structure-property relationships and fatigue crack propagation behaviour of rubber-toughened epoxies
    PhD, Lehigh, 1989. DA8909387. DAIB 50(2)596.
  2484. In Hee Hwang
    Thermo-viscoelastic behavior of composite materials
    PhD, University of Washington-WA, 1990. DA9104247. DAIB 51(9)4463.
  2485. Liang-Rung Hwang
    Processing-structure-property relationships of ceramic fibre reinforced silicon carbon oxygen matrix composites
    PhD, Auburn, 1991. DA9201230. DAIB 52(7)3840.
  2486. Shun-Fa Hwang
    Compressive strengths of fiber-reinforced composites with interface debonding
    PhD, University of California - Los Angeles, 1992.  AAD9310961  DAIB53(12)6383
  2487. Yimei Huang
    Some theoretical and experimental aspects of surface waves for elastic constant determination
    PhD, Drexel University, 1992.  AAD9311799  DAB53(12)6505
  2488. Byungsun Hwang
    Damage initiation during low-velocity impact on composite laminates
    PhD, University of Dayton, 1994.  AAD9428025  DAIB55(6)2361
  2489. Chyanbin Hwu
    Solutions to the anisotropic elastic wedge at critical wedge angles
    PhD, UIUC, 1988. DA8825117. DAIB 49(9)3847.
  2490. LL Hyde
    An investigation of composite beams without shear on the interface
    Masters, University of Washington-WA, 1966.
  2491. Ronald Gary Iacocca
    The oxidation of carbon fibre/glass matrix composites
    PhD, RPI, 1991. DA9220893. DAIB 53(3)1557.
  2492. FA Iannuzzi
    On the fracture toughness of composite materials
    PhD, Tennessee, 1974. DA7427210. N75-19364.
  2493. MS Ibe
    Energy absorption and failure in composite tubes
    MSc, Liverpool, 1987. ASLIB 38(2)4104.
  2494. EO Ibitolu
    Acoustic emission source location in bi-directionally reinforced composites
    MSc, CNAA: RNEC Manadon, July 1987. RNEC-AMEC22.
  2495. M'hamed Ibnabdeljalil
    Statistical aspects of the failure of brittle matrix composites, reinforced with unidirectional continuous discontinuous and time dependent brittle fibers
    PhD, Cornell University, 1994.  AAD9429308  DAIB55(6)2269
  2496. IB Ibrahim
    Non-destructive measurement of the complex permittivity of dielectric materials at microwave frequencies (Q-band)
    PhD, Sheffield, April 1984. DX85342.
  2497. K Ickert
    Uber die praxisorientierte Berechnung der Tragfahigkeit von kohlenfaserverstaerkten Kunststoffbauteilen mit der method der Finiten Elemente
    [Optimisation of fibre orientation in load-bearing CFRP structures]
    Doctorate, Stuttgart, 1987.
  2498. MOB Idrissi
    Contribution a l'etude de la cristallisation du polypropylene, influence de la prescence de fibres de verres
    [Crystallisation of polypropylene, influence of glass fibres]
    These de 3eme cycle, Lyon, 1983.
  2499. Peter Geza Ifju
    The shear gauge and compact shear specimen for shear property measurements of composite materials
    PhD, VPI&SU, 1992. DA9226033. DAIB 53(4)1916.
  2500. E Ignatowitz
    Zur herstellung eines kohlstoffaserverstarkten aluminium
    [The state-of-the art of unified carbonfibre reinforced aluminium]
    Dissertation, Karlsruhe, 1973.
  2501. GC Igwebuike
    A preliminary investigation of an elastomeric adhesive for composite construction
    Masters, Cincinnati, 1973.
  2502. Stanley Nwokedi Ihekweazu
    The study of the behaviour of various laminated composite materials
    PhD, SDSMT, 1987. DA0379179.
  2503. LB Ilcewicz
    A relationship between wave dispersion and fracture strength for a composite material
    PhD, Oregon SU, 1984. DA8418162.
  2504. J-H Im
    Fracture of fibre reinforced plastic laminates containing partial through-thickness cracks
    Sc.D, MIT, 1976.
  2505. Kee Hyuk Im
    Forming criteria for metal matrix composites
    PhD, California: Berkeley, 1990. DA9103734. DAIB 51(9)4559.
  2506. K Indefrey
    Automatisierte Qualitatskontrolle von CFK-prepreg mit digitaler Bilddatenverarbeitung
    [Automatic QC of CFRP prepregs with digital computers]
    Diploma, IKV Aachen, 1985.
  2507. VM Indenbaum
    Examination of stresses in heterogeneous cylindrical components made of composite materials
    Dissertation, TS Moscow, 1973.
  2508. E Inghels
    Comportement mecanique de composites a fibres et matrices ceramique -definition d'une methode d'analyse dans le cas de deux composites tisses a matrice carbure de silicium
    [Mechanical loading of silicon carbide matrix composites]
    PhD, EMP Evry, 1987.
  2509. AA Ingle
    Bilinear stress analysis of fibre composites and prediction of failure in fibre composite flywheels
    Masters, Villanova, 1983.
  2510. WR Ingram
    Modern multi-hulled boat construction
    Masters, San Diego State Coll, 1969.
  2511. JL Insprucker
    Column buckling of isotropic and composite beams using a truncated fourier series
    Masters, AFIT WPAFB, December 1979. AFIT/GA/AA/80M-2. AD A079 862.
  2512. BD Intwala
    The effect of elevated temperatures on the mechanical properties of boron-aluminium composites
    Masters, Tennessee, 1971.
  2513. G Inverarity
    The wetting of glass fibres by liquids and polymers.
    PhD, UMIST, January 1969. D49580/84.
  2514. K Iqbal
    Stiffness, strength and glass content of a GRP laminate loaded in tension and bending
    Postgraduate Diploma Rept, UMIST, 1981.
  2515. MJ Iremonger
    Stresses around discontinuities in fibre-reinforced materials
    PhD, London: ICST&M, 1969.
  2516. MN Irion
    Compression creep testing of composite materials
    MS, Wyoming, May 1980.
  2517. Jude Onwuegbu Iroh
    Thermoplastic matrix composites via in-situ electropolymerisation
    PhD, Connecticut, 1990. DA9109849. DAIB 51(11)5529.
  2518. SR Irwin
    Investigation of increased elastic bending stability of fiberglass tubes due to the introduction of a rigid polyurethane foam core
    Masters, Tennessee, 1969.
  2519. Jacqueline Ann Isaacs
    Structure and deformation of continuous alumina fibre reinforced aluminium composites
    PhD, MIT, 1991. DA-570488. DAIB 52(7)3841.
  2520. W Ishak
    Fibre reinforced plastics pressure vessels.
    Masters, Concordia, 1985.
  2521. ZA Mohd Ishak
    Mechanical properties of short carbon fibre reinforced nylon 6,6
    PhD, UMIST, September 1988. D78654.
  2522. VG Ishakian
    Stability analysis of continuum/skeletal fibre matrix systems
    PhD, Surrey, 1980. D33216/80.
  2523. H Ishida
    Masters, Doshisha Univ-Kyoto, 1973.
  2524. H Ishida
    Fourier transform infrared spectroscopic studies of glass matrix interface
    PhD, CWRU, 1977. DA7718827.
  2525. K Ishikawa
    On the bending of rectilinearly anisotropic plates with cracks
    Masters, Lehigh, 1966.
  2526. MR Islam
    Buckling and postbuckling strength of anisotropic plates.
    PhD, CWRU, September 1971.
  2527. NS Istephanous
    Low temperature fracture tougness and mechanical properties of a brittle matrix, ductile fibres composite containing micron size copper fibres
    Masters, Minnesota, 1979.
  2528. OO Ita
    Analysis of layered composite circular cylindrical shells.
    Masters, Rose-Hulman IT, 1981.
  2529. Kamoto Ito
    Effects of yarn undulation on the stress and deformation of textiles composites
    PhD, University of Delaware, 1995.  AADAAI9540544  DAB56(8)4565
  2530. NV Ivanov
    <structure of carbonised fibres>
    Dissertation, Voronezh, 1970.
  2531. AV Ivanov
    Computer modelling of failure of two-dimensional systems
    Dissertation, TS-Moscow, 1986.
  2532. Viswanathan R Iyer
    Studies on composite media as electromagnetic interference (EMI) shielding materials
    MSE, Florida Atlantic University, 1994.  AAD1356753  MA32(5)1442
  2533. A Jaafari
    Development and use of composite fibrous materials in the UK construction and civil engineering industry
    PhD, Surrey, 1977.
  2534. BJ Jabaji
    Three to nine node isoparametric composite plate and shell finite elements
    PhD, S.California, 1982.
  2535. HH Jabali
    Torsion of an embedded fibre containing a penny-shaped crack
    Masters, Miami, 1970.
  2536. H Jaberolanssar
    Longitudinal vibrations of a composite rod
    Masters, Tennessee TU, 1979.
  2537. TR Jachlewski
    Improved chemical vapour deposition process for carbon/carbon composites
    Masters, RPI, 1978.
  2538. RH Jackson
    An experimental study of the static deflection of composite materials
    Masters, Princeton, 1967.
  2539. BS Jackson
    Optical time domain reflectometry as a nondestructive evaluation technique for composite materials
    MSEE, VPI&SU, May 1984.
  2540. WC Jackson
    Method of predicting fibre orientation in compression moulded parts
    MS, UIUC, 1983.
  2541. SP Jackson
    Hygrothermal effects in an antisymmetric cross-ply graphite/epoxy material
    Masters, TA&MU, February 1984. MM-4665-84-7.
  2542. Karen Elizabeth Jackson
    Scaling effects in the static and dynamic response of graphite-epoxy beam-columns
    PhD, VPI&SU, 1990. DA9032494. DAIB 51(9)4463.
  2543. KA Jacob
    Experimental-numerical hybrid technique for two and three dimensional stress analysis of orthotropic composites
    PhD, IIS-Bangalore, August 1976.
  2544. JE Jacob
    Technoeconomic assessment of metal matrix composite piston process
    Masters, MIT, 1987.
  2545. ML Jacobs
    Evaluation of three polymer resins for use in polymer based composites for hard tissue prosthesis
    Masters, Pennsylvania, 1974.
  2546. DR Jacobs
    Elemental study of glass fibre composite connectors used in concrete sandwich wall construction
    Masters, Iowa SU, 1987.
  2547. PM Jacobs
    Hygrothermal effects in polyester resins
    PhD, Sheffield, 1989. ASLIB 39(3)6346.
  2548. G Jacobsen
    Studie zur verstaerkung von aluminium mit Bor- und Siliciumcarbid-fasern
    [Aluminium reinforced with boron- and silicon carbide fibres]
    Dipl.Chem, Karlsruhe, May 1980.
  2549. D Jacoby
    Population inversion in laser heated carbon fibre plasmas.
    PhD, Hull, December 1978. D43758/82.
  2550. WJ Jacques
    Soft body impact damage effects on boron-aluminium composites
    MS, AFIT, March 1974. GAW/MC/74-13. AD 780 628. N74-32033.
  2551. D Jacques
    [Plastic deformation at crack tips in composite materials]
    Doctorat, Institut Polytechnique de Lorraine - Nancy, 1989.
  2552. B Jafari-Naini
    Comparitive study on sandwich plate finite elements
    Masters, Concordia, 1986.
  2553. Vijay Jagannathan
    Influence of interphase structure on kinetics of oxygen reduction on graphite used in aluminium-graphite metal matrix composites
    PhD, Ohio SU, 1988. DA8822866. DAIB 49(8)3408.
  2554. H Jager
    Die Natur der Haftung au der Faser/Matrix Grenzflache und deren Einfluss auf das Schlagzahigkeitsverhalten von Kohlenstofaser verstaerkten Polymer verbund Korpern bei RT und 77K
    [The nature of fibre/matrix interfacial adhesion and its influence on fracture toughness behaviour of CFRP at ambient and 77K]
    Dipl.Chem, Karlsruhe, December 1985.
  2555. MK Jagiello
    Ortotropowe pasmo plytowe na dwuparametrowym sprezystem podlozu
    [Orthotropic plate band on a two-parameter elastic support]
    Dr.inz, Poli.Wroclawska, 1980.
  2556. M Jahanmir
    Theory of composites modelled by interpenetrating solid continua
    PhD, RPI, 1976. DA7627196.
    >>> L Jai-Lue, see JL Lai.
  2557. PK Jain
    Water sorption & physical properties of nylon-66 filler composites
    Masters, Villanova, 1970.
  2558. AK Jain
    Fatigue failure mechanism in prestressed glass monofilament reinforced polymer composites
    Masters, CWRU, 1982.
  2559. MK Jain
    Physical and morphological changes during the conversion of acrylonitrile-based fibres to carbon fibres
    PhD, Georgia IT, 1985. DA8510964.
  2560. Manoj Kumar Jain
    Micromechanical properties of collagen based composites
    PhD, SUNJ New Brunswick & UMDNJ, 1989. DA9008901. DAIB 50(11)5192.
  2561. Sanjeev Jain
    Delamination prevention in drilling of composite laminates and force modelling of the milling operation
    PhD, UCLA, 1991. DA9205988. DAIB 52(9)4935.
  2562. Lalit Kumar Jain
    Fracture toughness of short fibre/brittle matrix composites
    PhD, SUNY Buffalo, 1992. DA9222064. DAIB 53(3)1567.
  2563. Donald John Jaklitsch
    Computer automation of the pultrusion process
    DEng, Lowell, 1990. DA9109858. DAIB 51(11)5559.
  2564. DM Jakobs
    Hybrid stress reduced Mindlin element for thin multilayer plates with application to edge contact problems
    PhD, Illinois @ Chicago, 1984. DA8411329. N84-32857.
  2565. JJ Jakubowski
    Interface modification of carbon fibre composites by electropolymerisation
    Masters, Washington SU, 1976.
  2566. JJ Jakubowski
    Electrochemical polymerisation and deposition of carbon fibres
    PhD, Washington SU, 1979. DA8007240.
  2567. TK James
    Low cycle fatigue of a plastic laminate
    Masters, Oklahoma, 1966.
  2568. Darryl Lynn James
    Thermal analysis of the continuous filament winding process
    PhD, Georgia Institute of Technology, 1992.  AAD9318566  DAIB54(2)1027
  2569. RD Jamison
    Advanced fatigue damage development in graphite-epoxy laminates
    PhD, VPI&SU, August 1982. DA8310702.
  2570. VF Janas
    Viscoelastic behaviour of short-fibre composites.
    PhD, Delaware, 1986. DA8708709.
  2571. JN Jang
    Shear lag model of damaged fibre composites.
    Masters, UCLA, 1984.
  2572. J Jang
    The adhesion promotion of composite interfaces and corrosion protection for metal surfaces by using silane derivatives
    PhD, CWRU, 1988. DA8819871.
  2573. Bor-Ping Jang
    Oxidation behavior of carbon/carbon composites with/without CVD ceramic coatings
    PhD, Auburn University, 1995.  AADAAI9525358  DAB56(3)1648
  2574. TC Janisse
    Parametric study of surface imperfections and small cut-outs in a composite panel
    MS, AFIT WPAFB, December 1982. AFIT/GAE/AA/82D-15. AD A124 739. N83-25793.
  2575. JJ Janowiak
    Impact behaviour of reconstituted wood
    PhD, Washington SU, 1988.
  2576. Dion Petar Jansen
    Acoustic tomographic imaging of solid media
    PhD, Queen's University at Kingston (Canada), 1992.  AADNN76371  DAIB54(2)913
  2577. TL Janssen
    A triangular finite element for laminated composite plates including transverse shear deformation
    PhD, Kansas, 1977. DA772884.
  2578. SH Jao
    Interface studies in composite materials
    Masters, MIT, 1988.
  2579. Shyu-Hua Jao
    Studies of interface properties and influence of fibre coating in composite materials
    PhD, MIT, 1990. DA-381890.
  2580. C Jaroscheck
    Kriterien fur die rechnergestutze Wickelsteuerdatenermittlung
    [Criteria to determine control parameters in filament winding]
    Graduate thesis, IKV Aachen, 1986. S8650.
  2581. PK Jarvela
    Properties of glass fibres and their application in porous composites
    Thesis 20, Tampere UT-Finland, 1983. ISSN 0356-4940. ISBN 951-720-786-7.
  2582. GJ Jarzebski
    Viscoelastic properties of composite materials
    PhD, Delaware, 1982. DA8309896.
  2583. I Jasiuk
    The sliding inclusion in 3-D elasticity
    PhD, NWU, 1986.
  2584. Conrad Werner Jauslin
    Tension behavior of fingerjoints in wood laminates
    PhD, Colorado State University, 1992.  AAD9303875  DAIB53(9)4829
  2585. J Jaussaud
    Fracture behaviour of a toughened epoxy resin and its carbon fibre laminates
    MSc, Cranfield IT, 1988.
  2586. JAM Jaussaud
    <toughness transfer from matrix to composite in UD-CFRP>
    PhD, Cranfield IT, in preparation at April 1991.
  2587. V Jayaram
    Crack initiation and microstructure in tungsten carbide/cobalt composites
    PhD, Stanford, 1985. DA8522164.
  2588. K Jayaraman
    Interlaminar stresses and edge effects in composite laminates
    MTech, IIT-Madras, 1982.
  2589. Krishnan Jayaraman
    Effect of the interphase on the thermo-mechanical response of unidirectional fiber-reinforced epoxies:  modeling, analyses and experiments
    PhD, Virginia Polytechnic Institute and State University, 1992.  AAD9237149   DAIB53(8)4206
  2590. Raghavan Jayaraman
    Creep and creep-rupture of carbon fiber reinforced polymer composites
    PhD, Northwestern University, 1994.  AADAAI9521730  DAB56(3)1649.
  2591. BS Jayas
    Behaviour of headed studs in hollow composite beams
    Masters, Saskatchewan, 1986.
  2592. Ambalangodage Mangala Mahinda Jayasuriya
    Dynamic analysis of composite shells in hygrothermal environment
    PhD, West Virginia University, 1993.  AAD9410325  DAIB54(11)5899
  2593. L-C Jea
    Fracture toughness of graphite/epoxy composite laminates enhanced by the intermittent interlaminar bonding strength
    PhD, Michigan, 1979. DA7925165. N80-13169.
  2594. P Jeanne
    Influence des proprietes de la surface des fibres sur les caracteristiques viscoelastiques et mecaniques des composites unidirectionnels verre/epoxyde
    [Influence of fibre surface property on viscoelastic and mechanical character of unidirectional glass/epoxy]
    DIng, Lyon, 1986.
  2595. P Jeanne
    Contribution a l'etude des zones interfaciales dans les composites polyepoxyde-fibres de verres
    [Interfaces in glass fibre reinforced epoxy composites]
    DIng/PhD, Ecole Centrale de Lyon, 1986. In French. ECL-86-10. ETN-87-99417. N87-21055.
  2596. Yong Ju Jee
    Compressive behavior of advanced carbon fiber composite materials
    PhD, University of Utah, 1994.  AAD9419711  DAIB55(3)1124
  2597. MR Jeffery
    Fatigue behaviour of short-fibre-reinforced polyesters.
    Masters, Delaware, 1980.
    >>> MR Jeffery, see also MR Jeffrey.
  2598. DC Jeffords
    Modelling honeycomb sandwich panels
    Masters, Vanderbilt, 1968.
  2599. MR Jeffrey
    Fatigue behaviour of short fibre reinforced polyester
    PhD, Delaware, (?1989?). Quoted by Ogin @ FRC90/Liverpool.
    >>> MR Jeffrey, see also MR Jeffery.
  2600. Thierry Jeggy
    Damages in graphite/epoxy notched plates under monotonic biaxial loadings
    Dr, Ecole Centrale des Arts et Manufactures, 1990.  AADC287105  DAIC54(2)627
  2601. DC Jegley
    Analytical study of the effects of transverse shear deformation and anisotropy on buckling loads of laminated cylinders
    Masters, NASA-Langley, October 1987. NASA-TM-100508. N88-13387.
  2602. M Jehrke
    Fertigung endlosfaserverstaerkter Bauteile mit der Rundflechttechnologie
    Unpublished Diploma, IKV Aachen, 1990.
  2603. Ahmed Jelidi
    Conception d'un materiau composite a matrice cimentaire renforcee par des fibres de polyester
    [Development of a cement composite using polyester fibres]
    Doctorate, INSA Lyon, 1991. DA-C194335. DAIC 52(4)656.
  2604. KP Jen
    Water jet simulation of rain erosion damage in fibre reinforced Teflon
    Masters, Tennessee TU, 1979.
  2605. M-HR Jen
    The residual strength determination due to fatigue loading by fracture mechanics in notched composite materials
    PhD, VPI&SU, 1985. DA8511968. N86-14683.
  2606. Kwang-Chi Jen
    On the effect of matrix cracks on laminate strength
    PhD, Purdue, 1988. DA8911926. DAIB 50(3)1029.
  2607. J-H Jeng
    Numerical techniques for wave propagation and scattering problems associated with anisotropic composites
    PhD, Pennsylvania SU, 1988. DA8818008. DAIB 49(7)2815.
  2608. Shwangming Jeng
    Fracture mechanisms of the SCS-6 fibre-reinforced titanium alloy matrix composites
    PhD, UCLA, 1991. DA9213645. DAIB 52(12)6600.
  2609. JC Jenkins
    Sorption and diffusion of water in polyester resins.
    MScTech, Sheffield, 1978.
  2610. TA Jenkins
    The electrical resistivity of [carbon/alloy] composite materials
    PhD, Clarkson CT, 1982. DA8219886. N83-13358.
  2611. JR Jenness
    Dynamic mechanical properties of some epoxy-matrix composites
    PhD, Pennsylvania SU, 1972. DA7320093.
  2612. DW Jensen
    Natural vibrations of cantilever graphite epoxy plates with bending torsion coupling
    Masters, MIT, 1981.
  2613. DW Jensen
    Buckling and postbuckling behaviour of unbalanced and unsymmetric laminated graphite/epoxy plates
    PhD, MIT, 1986.
  2614. KY Jeong
    Analysis of adhesively bonded anisotropic structure with a cracked plate
    MSc, KAIST-Korea, 1981.
  2615. H Jeong
    Bending behaviour and modelling of composite box beams with deformable cross section
    Masters, RPI, 1986.
  2616. Hyunjo Jeong
    Ultrasonic characterisation of elastic constants and defects in composite materials
    PhD, Iowa SU, 1990. DA9110512. DAIB 51(11)5539.
  2617. KL Jerina
    The effect of dilational strain on the failure of fibrous composite materials
    MS, Washington University-MO, 1971.
  2618. KL Jerina
    The effective moduli of three dimensionally reinforced fibrous materials
    DSc, Washington University-MO, May 1974. DA7423638.
  2619. JV Jerums
    Buckling of circular sandwich plates
    Masters, Marquette, 1968.
  2620. Todd Jessen
    Effect of microstructural variability on the mechanical behavior of ceramic fiber reinforced ceramic matrix composites
    PhD, Rutgers the State University of New Jersey, 1995.  AADAAI9537594  DAB56(7)3961
  2621. TK Jester
    Some optimisation problems of fibre reinforced plates and beams
    Masters, Illinois, 1967.
  2622. C Jeyachandrabose
    Finite element formulations for thin plate and shallow shell structures
    PhD, Carleton-Ottawa, 1986.
  2623. P Jezzard
    Nuclear magnetic resonance imaging of polymers & polymer composites
    PhD, Cambridge, January 1991. D60070.
  2624. NJ Jhaveri
    Graphite fibre reinforcement in thermoplastics
    Masters, Lowell, 1973.
  2625. Yaodong Ji
    Tensile properties of needle punched nonwoven fabrics
    PhD, North Carolina State University at Raleigh, 1992.  AAD9309772  DAIB 53(11)5870
  2626. KC Jiang
    Stability analysis of laminated plates by finite element method
    Masters, Tennessee TU, 1978.
    >>> Qu Jianmin, see J Qu.
  2627. Li Jian-Xin
    <temperature-deformation-cure coupling>
    Masters, Beijing Univ Aero & Astronautics, 1985.
  2628. Chan-Jiun Jih
    Analysis of delamination in composite laminates under low velocity impact
    PhD, Purdue, 1991. DA9215571. DAIB 53(1)406.
  2629. Y Jin
    Eigenfunctions at a singular point in transversely isotropic materials and composites under axisymmetric deformations.
    PhD, UIUC, 1986. DA8705188.
  2630. C Jin
    Analytical study of the nonlinear interface in fibrous composites
    Masters, Missouri: Columbia, 1988.
  2631. H-S Jing
    An experimental and numerical study on the detection of edge flaws in laminated plates
    PhD, Ohio SU, 1985. DA8603017.
  2632. R Joannides
    Wave motion in thick damped laminated orthotropic plates
    PhD, Southampton, 1987. D82115. DAIC 49(4)2756. ASLIB 38(1)1979.
  2633. D Joh
    An experimental study of frictional phenomena around the pin joints of plates using moire interferometry
    PhD, VPI&SU, 1986.
  2634. Lucien Marinus Johannes
    The development of rubber forming as a rapid thermoforming technique for continuous fibre reinforced thermoplastic composites:  quality control by process control
    Dr, Technische Universiteit Te Delft (The Netherlands), 1994.  AADC369942 DAIC55(4)1328
  2635. Birgir Johannesson
    Internal stresses and the cyclic deformation of an aluminium matrix composite
    PhD, University of Surrey, 1992.  AADDX98103  DAIB53(10)5395
  2636. Eric G Johansen
    A prestressed Kevlar cable/FRP structural system:  lightweight maintenance-free and adjustable
    PhD, University of Pennsylvania, 1995.  AADAAI9532212  DAB56(5)2762
  2637. Amanda Johns
    Radical cleavage reactions of epoxides
    PhD, Nottingham, 1989. D89355. DAIB 51(3)1269.
  2638. RP Johnson
    Failure criteria for structural plastics
    Masters, MIT, 1966.
  2639. JE Johnson
    The effect of batch and static mixing of the volumetric shrinkage of an epoxy resin
    Masters, Purdue, 1971.
  2640. RA Johnson
    Experiments on elastic buckling of clamped composite shear plates
    MS, Washington University-MO, 1971.
  2641. RD Johnson
    The effect of water vapour adsorption on the specific surface of fibreglass 'E'
    Masters, Iowa SU, 1971.
  2642. K Johnson
    The mechanical behaviour of laminated carbon fibre reinforced plastics
    PhD, Nottingham, 1973.
  2643. WS Johnson
    Characterisation of fatigue damage mechanisms in continuous fibre reinforced metal matrix composites
    PhD, Duke, December 1979. DA8012034. N80-25379.
  2644. BC Johnson
    High performance polyimide copolymers: synthesis and characterisation
    PhD, VPI&SU, June 1984. DA8421872.
  2645. JR Johnson
    Design and fabrication of a scaled composite fuselage section for the 'UTIAS' crash program
    Masters, Toronto, 1985.
  2646. CL Johnson
    The effect of ply stacking sequence upon stresses in an adhesive bonded scarf joint
    Masters, San Diego SU, 1986.
  2647. JC Johnson
    FT-Raman investigation of curing reactions in polyimides
    PhD, Temple, 1990.
  2648. Lee Ann Johnson
    Analysis of fibre/matrix interface in unidirectional fibre-reinforced composites
    MS, Texas @ Arlington, 1991. MA1347232. MA 30(3)865.
  2649. David Page Johnson
    The effect of specimen size on the mechanical response of laminated composite coupons loaded in tension and flexure
    PhD, Virginia Polytechnic Institute and State University, 1994.  AAD9502722  DAIB55(9)4073. VT.
  2650. DP JohnsonRiitta Sofia Jolanki
    Occupational skin diseases from epoxy compounds: epoxy resin compounds, epoxy acrylates and 2,3-epoxypropyl trimethyl ammonium chloride
    DrTechn, Helsingin Yliopisto, 1991. DA-C209791. DAIC 53(1)106.
  2651. JP Jollay
    Crack growth measurements in boron aluminium composite laminates and related analysis
    Masters, Tennessee @ Knoxville and Tullahoma, 1979.
  2652. CK Jolly
    Fibre-reinforced composites with brittle matrices: stress-strain characteristics and weathering properties
    PhD, Southampton, 1979. D65972/86.
  2653. ER Jones
    Elastic properties of composite materials
    Masters, Florida, 1965.
  2654. DE Jones
    Stresses in a nonhomogeneous elastic plate with a circular hole
    Masters, GWU, 1970.
  2655. WC Jones
    The effect of fillers on the mechanical properties of polyester resin and a constrained optimisation of filler content.
    Masters, VPI&SU, 1971.
  2656. ER Jones
    Wave propagation in filamentary composite materials
    PhD, Florida, 1972. DA7315581.
  2657. MG Jones
    Damping of structural composites with plastic strain damping mechanisms
    Masters, Massachusetts, 1972.
  2658. GL Jones
    Acoustic emission studies of composites and composite reinforced metals
    PhD, VPI&SU, March 1974. DA7420371.
  2659. TJ Jones
    A method of improving the fracture toughness of fibre reinforced composites
    Masters, MIT, 1976.
  2660. TS Jones
    Thermographic detection of damaged regions in fibre-reinforced composite materials
    MS, VPI&SU, April 1977.
  2661. MLC Jones
    Failure mechanisms in filament wound composites
    PhD, Liverpool, 1981.
  2662. WF Jones
    Unidirectional composite laminates with circular and rectangular cutouts
    Masters, Clemson, 1981.
  2663. WF Jones
    Experimental determination of internal damage growth in unidirectional boron/aluminium composite laminates
    PhD, Clemson, August 1982. DA8300104.
  2664. K Jones
    Static aeroelastic analysis of flexible wings via Nastran.
    Masters, AFIT @ WPAFB, December 1982. AFIT/GAE/AA/82D-16-pt-1. AD A124 662. N83-26099.
  2665. LE Jones
    3D carbon-carbon composite characterisations- a prediction of C/C nozzle recession under rocket motor conditions.
    Masters, Pennsylvania SU, 1984.
  2666. WR Jones
    Investigations of resin injection techniques and their application in composite fabrication
    MSc, Salford, 1984. Restricted.
  2667. CI Jones
    Hygrothermal conditioning and fatigue behaviour of high performance composites
    PhD, Bath, February 1985. D56841/85. ASLIB 36(2)4096.
  2668. CC Jones
    Development & characterisation of cast aluminium ceramic composite
    Masters, Virginia, 1987.
  2669. LE Jones
    The effect of boron on carbon fibre microstructure and reactivity
    PhD, Pennsylvania SU, 1987. DA8714836.
  2670. MC Jones
    Composite reliability enhancement via reloading
    Masters, NPS Monterey, 1988.
  2671. C Coleman Jones
    The effects of particulate impurities on the properties of squeeze cast whisker reinforced aluminum
    PhD, University of Virginia, 1992.  AAD9237648  DAIB53(8)4312
  2672. Keith Douglas Jones
    Application of 2-oxazoline/bismaleimide resins to high-performance composites
    PhD, University of Connecticut, 1994.  AAD9503666  AADNN90028  DAIB55(9)3910.
    >>> SD Jong, see S De Jong.
    >>> TD Jong, see T De Jong.
  2673. Yun-Sool Joo
    Time-dependent analysis of partially prestressed composite members
    PhD, Nebraska: Lincoln, 1989. DA9013640. DAIB 50(12)5779.
  2674. WM Jordan
    Effect of resin toughness on the delamination fracture behaviour of graphite/epoxy composites
    PhD, TA&MU, December 1985. DA8605167.
  2675. Catherine Jordan
    Crosslinking of an epoxy/amine system under a microwave field.  An application to the realization of glass fiber reinforced composite materials
    Etude de la reticulation d'un systeme epoxy/amine sous apport d'energie microondes: application a l'elaboration de materiaux composites
    Institut National des Sciences Appliques de Lyon, 1992.  AADC313203  DAIC54(4)1230
  2676. E Joseph
    Processing parameters for diffusion bonded pure aluminium boron filament composites
    Masters, AFIT, 1967.
  2677. JR Joseph
    The growth, morphology and reinforcement potential of low molecular weight crystals in amorphous polymeric matrices
    MS, Washington University-MO, 1967.
  2678. Mark Joseph
    Analysis of resin transfer molding:  material characterization molding and simulation
    PhD, Ohio State University, 1993.  AAD9412039  DAB54(11)5816.
  2679. SP Joshi
    Studies on optimisation of laminated composite plates.
    MTech, IIT @ Kanpur, August 1981.
  2680. SP Joshi
    Impact damage characterisation in laminated composites.
    PhD, Purdue, 1985. DA8529286. N86-32527.
  2681. SC Joshi
    Delamination in fibre reinforced composite materials
    MTech, IIT Bombay, December 1987.
    >>> KMA Joubory, see KM Al-Joubory
  2682. I-L Joung
    Acoustic radiation from bilaminar plates
    PhD, Pennsylvania SU, 1984. DA8429096. N85-24903.
  2683. Jinder Jow
    Microwave processing and dielectric diagnosis of polymers and composites using a single-mode resonant cavity technique
    PhD, Michigan SU, 1988. DA8912593. DAIB 50(3)1040.
  2684. T Joy
    Percolation and conductivity in unidirectional fibre composite materials
    PhD, Notre Dame, 1980. DA8028462. N81-13090.
  2685. Teh-Hua Ju
    Transient pulse propagation and dynamic analysis of fracture in composite laminated plates
    PhD, Colorado @ Boulder, 1991. DA9220421. DAIB 53(2)1028.
  2686. Nils Frederick Juhlin
    Modelling the mechanical behaviour of brittle matrix composites using a finite element approach
    PhD, Univ Washington - WA, 1991. DA9124926. DAIB 52(3)1678.
  2687. Sukky Jun
    Elastic moduli of two-dimensional composites with sliding inclusions:  a comparison of the effective medium theories
    MS, Michigan State University, 1992.  AAD1349057  MA31(1)338
  2688. Alexander Wanki Jun
    Compressive strength of unidirectional fiber composites with matrix nonlinearity
    PhD, Purdue University, 1993.  AAD9403720  DAIB54(9)4792
  2689. Han Soo Jung
    Finite element modelling of static indentation damage in laminated composites
    PhD, Florida, 1991. DA9209028. DAIB 52(10)5383.
  2690. Taehwan Jung
    Formation of thin films on mineral fibers by the sol-gel process for composite reinforcement
    PhD, Washington State University, 1992.  AAD9321037  DAIB54(3)1606
  2691. RA Jurf
    Effects of moisture on the static and viscoelastic shear properties of epoxy adhesives
    MMAE, Delaware, 1984.
  2692. RA Jurf
    Behaviour of bolted joints in composite laminates.
    PhD, Delaware, 1987. DA8719533.
  2693. AV Jurjans
    Strength of organic plastics and hybrid composite materials manufactured on their base
    Dissertation, Riga, 1988.
  2694. B Jutis
    An increase in the interfacial bond strength of Kevlar 49/epoxy resin by the introduction of pendant chains at the fibre surface
    Masters, PI Brooklyn, 1988.
  2695. Conrad Wener Juuslin
    Tension behavior of fingerjoints in wood laminates
    PhD, Colorado State University, 1992.  AAD9303875  DAB53(9)4829
  2696. RL Kaas
    The interactions of silane coupling agents with silica surfaces
    DSc, Washington University-MO, 1971.
  2697. Bassem A Kabbara
    Evaluation of fibre reinforced plastic bridge decks under fatigue loads using acoustic emission technique
    MS, CSULB, 1990. MA1340935. MA 29(1)129.
  2698. Humayun RH Kabir
    Static and dynamic analysis of laminated finite doubly curved shell
    PhD, Utah, 1990. DA9021122. DAIB 51(3)1401.
  2699. AS Kacar
    Interaction between silicon carbide particles and the solid-liquid interface in aluminium based metal matrix composites
    Masters, Alabama, 1988.
  2700. L Kacir
    The effect of fibre geometry and orientation on strength and failure mechanism of discontinuous fibre reinforced polymer.
    DSc, Technion-IIT Israel, 1976.
  2701. Fevzi Suat Kadioglu
    Cracking and debonding problems for bonded orthotropic layers
    PhD, Lehigh University, 1993.  AAD9325950  DAIB54(4)2156
  2702. GD Kage
    Estimating the cost of composite material airframes using the Rand Corporation development and procurement costs of aircraft parametric model (DAPCA III)
    Masters, AFIT, September 1983. AFIT-LSSR-39-83. AD A134 993. N84-17120.
  2703. M Kageyama
    The effect of delaminations on the failure of pressurised graphite/epoxy cylinders
    Masters, MIT, 1986.
  2704. Arnold Bruce Kagle
    Thermal, mechanical and crack propagation properties of injection moulded fibrous and platelet-reinforced polypropylene composites
    MSEng, Lowell, 1989. MA1337456. MA 28(1)127.
  2705. Byungnam Kahng
    Anomalous transport and breakdown phenomena in composite systems
    PhD, Boston, 1990. DA8922639. DAIB 50(7)2993.
  2706. Ramazan Kahraman
    Influence of fiber-matrix interphase on high-temperature behavior of glass-ceramic matrix composites
    PhD, Montana State University, 1993.  AAD9316441  DAIB54(2)1036
  2707. G Kaklamanos
    Model testing of saddle supported RP storage vessels.
    MSc, Strathclyde, 1986. ASLIB 36(3)6434.
  2708. MA Kalam
    A new equilibrium finite element analysis of stresses in orthotropic cylinders with temperature dependent material propertys
    PhD, Kentucky, 1979. DA7927685.
  2709. Javad S Kalantar
    The bonding mechanism of aramid fibres to epoxy matrices
    MS, Michigan SU, 1988. DA1333343. MA 27(1)140.
  2710. MM Kaldas
    Application of the finite element method to the vibration and stress analysis of polar orthotropic discs
    Masters, Carleton, 1976.
  2711. OYu Kalekin
    Use of half turn method to investigate symmetrically loaded shells of revolution of medium thickness
    Dissertation, Tech.Sci-Kharkov, 1967.
  2712. P Kalkanis
    Strength of mechanical joints in 'Kevlar' fibre reinforced plastics
    MSc, London: ICST&M, September 1984.
  2713. Mohamed Nabil Kallas
    Effects of tape placement on the mechanical behaviour of a graphite /PEEK composite
    PhD, Pennsylvania SU, 1991. DA9204228. DAIB 52(8)4301.
  2714. Imen Kallel
    Etude du flambage des plaques composites
    MScA, Universite de Sherbrooke, 1991.  AADMM71350  MA31(2)853
  2715. Shankar Kalyanasundaram
    An investigation of damping behaviour in composite materials
    PhD, Texas A & M University, 1994.  AAD9432702  DAIB55(7)2865
  2716. Sridhar Kalyanaraman
    Unidirectional oriented whisker reinforced silicon carbide composite
    MS, University of Massachusetts, 1994.  AADAAI1360376  MA33(4)1283
  2717. Nauzer Kalyaniwalla
    Nonlinear optical response of composites
    PhD, Rensselaer Polytechnic Institute, 1991.  AAD9220897  DAIB53(6)2951
  2718. W Kam
    Moisture diffusion in composite materials
    Masters, San Diego SU, 1987.
  2719. Michael Kamel
    Integral formulations with special kernels for a composite panel with an elliptical hole or a crack
    PhD, City University of NY, 1990. DA9108126. DAIB 51(11)5539.
  2720. Ahmed Mohamed Kamel
    Generating multiple design alternatives of composite materials using a generic task approach
    PhD, Michigan State University, 1994.  AAD9431263  DAIB55(7)2851
  2721. K Kamimura
    Delaminage par fatigue des materiaux composite carbone-epoxyde
    [Fatigue delamination of carbon-epoxy composite materials]
    Doctorat de 3eme cycle, UT Compiegne, 10 June 1980.
  2722. BE Kaminski
    On the determination of the failure surfaces for an orthotropic quasi-homogeneous material
    Masters, Georgia IT, June 1969.
  2723. HP Kan
    On the nonlinear theory of rectangular sandwich plates.
    Masters, Tennessee TU, 1967.
  2724. Yih-Renn Kan
    Analysis of unsymmetrically laminated plates
    PhD, UCLA, 1971. DA7201485.
  2725. AR Kandil
    Initial deformations of plain woven fabrics
    PhD, Leeds, October 1981. D88833.
  2726. VN Kanellopoulos
    An investigation of the moisture absorption characteristics of carbon fibre reinforced plastics and pure resins
    MSc, Salford, 1982.
  2727. VN Kanellopoulos
    Hygrothermal characteristics of carbon fibre reinforced plastics
    PhD, Salford, June 1985. D66905/86.
  2728. M Kanellopoulou
    Generation and finite element modelling of sweep-based solids
    Masters, RPI, 1982. TR-82010.
  2729. SI Kang
    Determination of effective moduli of composite materials by a three-dimensional finite element method
    PhD, Georgia IT, 1974. DA7411416.
  2730. Jong-Bong Kang
    Mechanical and thermal expansion characterisation of angle-ply laminated and three-dimensionally woven composite materials
    PhD, NCSU @ Raleigh, 1991. DA9130626. DAIB 52(5)2729.
  2731. Seung-Gu Kang
    Optical and mechanical properties of optically transparent composites
    PhD, University of Missouri - Rolla, 1992.  AAD9311033  DAIB53(12)6493
  2732. Pramod Balkrishna Kangutkar
    Matrix cracking initiation stress in fibre-reinforced ceramic matrix composites
    PhD, Drexel, 1991. DA9208262. DAIB 52(11)6026.
  2733. Srikanth Kanneganti
    Feasibility studies on carbon fiber composite cables in reinforced, prestressed concrete structures
    MS, Florida Atlantic University, 1994.  AADAAI1359890  MA33(3)947.
  2734. MAK Kanona
    Flexibility and stress intensification factors of glass reinforced plastic pipe bends
    PhD, Aston, February 1985. D67085/86.
  2735. MZ Kanovich
    Design of layered materials with high compressive strength
    Dissertation, Moscow, 1972.
  2736. R Kant
    The elastostatic axisymmetric problem of cracked sphere embedded in a dissimilar matrix
    Doctorate, California: Berkeley, 1979.
  2737. MR Kantz
    Deformation behaviour of continuous thermoplastic fibre reinforced polypropylene composites
    PhD, Drexel, 1975. DA7514403. N75-27076.
  2738. SBM Kanyanga
    Fatigue and fracture behaviour of carbon fibre reinforced plastics
    PhD, Sheffield, 1988. ASLIB 39(2)4680.
  2739. S-C Kao
    Vibration of sandwich discs
    Masters, Tennessee TU, 1968.
  2740. SV Kao
    Effects of solid particle surface on the rheology of suspensions
    DSc, Washington University-MO, 1973.
  2741. W-T Kao
    Thermally induced vibration of laminated composite plates.
    PhD, Nebraska-Lincoln, 1973. DA7325454.
  2742. H Kao
    Penetration and scattering of electromagnetic fields by advanced composite bodies of revolution
    PhD, California: Berkeley, 1979. DA8000396.
  2743. Rasesh Dilranjan Kapadia
    Applications of NMR imaging in materials science
    PhD, CWRU, 1991. DA9205204. DAIB 52(9)4922.
  2744. JF Kapinos
    HELIX: method of solving three dimensional heat conduction equation in cylindrical coordinates with variable thermal properties
    Masters, Connecticut, 1982.
  2745. JR Kapp
    Thermal mechanical analysis of composite orthotropic cylinders
    Masters, Utah SU, 1969.
  2746. PV Kaprielian
    The effects of holes and free edges on the stress in laminated plates
    PhD, Nottingham, October 1985. D65919/86.
  2747. R Kar
    Stress intensity factors (SIF) in glass plates with edge cracks by half fringe photoelasticity
    MS, Iowa SU, 1982.
  2748. I Karacan
    X-ray diffraction studies of aromatic fibres
    PhD, Leeds, July 1986. D88821.
  2749. Dimitrios Karalekas
    Investigation of the thermomechanical behaviour of metal matrix composites
    PhD, NWU, 1990. DA9114571. DA 51(12)6051.
  2750. GN Karam
    Mechanics of wood cement composites
    MSCE, MIT, 1990.
  2751. Prashant Govind Karandikar
    Evolution of damage and mechanical response in ceramic matrix composites under monotonic and fatigue loadings: experimental characterisation and modelling
    PhD, University of Delaware, 1992.  AAD9232608  DAIB53(6)3096
  2752. Levent Karaoglan
    Axial impact of composites
    PhD, Stanford University, 1993.  AAD9309612  DAIB53(11)5838
  2753. Nicos M Karaolis
    The design of fibre-reinforced composite blades for passive and active wind turbine rotor aerodynamic control
    PhD, Reading, October 1989. DX90037. DAIB 51(5)2562.
  2754. Mark L Karasek
    The effect of temperature and moisture on the impact response of polymer matrix composites
    PhD, Pennsylvania State University, 1992.  AAD9236849  DAIB53(7)2753/3753
  2755. Metin Karayaka
    An investigation into thermomechanical fatigue of metal matrix composites
    PhD, UIUC, 1992. DA9215835. DAIB 53(1)515.
  2756. Vistasp Maneck Karbhari
    Issues of scale in composites fracture and design
    PhD, Delaware, 1991. DA9206375. DAIB 52(9)4922.
  2757. JC Karika
    Characterization of graphitization in coal tar and petroleum pitches
    Masters, AFIT @ WPAFB, August 1985. AD A166 942.
  2758. Md Rezaul Karim
    Transient response of laminated composites with subsurface cracks
    PhD, Arizona, 1988. DA8905793. DAIB 49(12)5391.
  2759. K Karlisch
    Mechanische Eigenschaften von mit Kohlenstoffasern verstaerkten Kohlenstoffkorpern sowie einige Anwendungen als Konstruktionswerkstoff
    [Mechanical quality of carbon/carbon composite with application to constructional materials]
    Dipl.Ing, Karlsruhe, February 1977.
  2760. AG Karmakar
    Flexural analysis of orthotropic plates using triangle finite elements
    Masters, N.Dakota, 1970.
  2761. John Kartsanis
    Investigation of fused silica matrix reinforced by silicon carbide fibres
    MS, Lowell, 1990. MA1341934. MA 29(2)298.
  2762. Warnakulasooriya Mudiyanselage Karunasena
    Elastic waves in laminated composite plates for application in ultrasonic nondestructive evaluation
    PhD, University of Manitoba, 1992.  AADNN77849  DAIB54(3)1552
  2763. Akihito Kasagi
    Interactive buckling of ring-stiffened composite cylindrical shells
    D.Sc, Washington University, 1994.  AAD9433561  DAIB55(7)2839
  2764. A Kashani-Akhavan
    Fracture toughness of glass fibre reinforced cement composites
    PhD, Cambridge, 1978-79.
  2765. U Kashalikar
    Biaxial interlaminar fracture of graphite/epoxy composites
    Masters, Delaware, 1984.
  2766. K Kashani
    Studies of mechanical properties of glass reinforced polystyrene
    MSc, UMIST, 1975!.
  2767. K Kashfi
    Extrusion of glass fibre filled polypropylene
    MSc, Cranfield IT, 1976.
  2768. R Kashihara
    Fracture of random chopped mat and woven roving reinforced plastics
    Masters, MIT, 1974.
  2769. AS Kassouf
    Mechanical properties of short glass fibre-reinforced polypropylene
    PhD, UMIST, March 1984. D76389. ASLIB 38(2)4105.
  2770. KA Kasturiarachchi
    Hygrothermal degradation of fibre reinforced epoxide resins under stress
    PhD, CNAA: Kingston (Appl.Chem), September 1983.
  2771. T Kasuh
    Oxidation of mesophase pitch [chemistry of carbon fibres]
    PhD, Newcastle upon Tyne, October 1989. DX89720.
  2772. YuI Katarzhnov
    Experimental study of the load-bearing capacity of compressed hollow circular and rectangular composite rods under compression and torsion
    PhD, Riga, 1982.
  2773. K Kathiresan
    Three dimensional linear elastic fracture mechanics by a displacement finite element model
    PhD, Georgia IT, September 1976. DA7707794.
    >>> KA Kathuriarachchi, see KA Kasturiarachchi.
  2774. Javad Katibai
    On the application of boundary element method to plane orthotropic elasticity
    MS, Michigan SU, 1989. MA1338625. MA 28(2)308.
  2775. Kambiz Katoozian
    Stress and buckling analysis of metallic and composite flat plates with centrally located flanged elliptical cutouts
    MS, CSULB, 1989. DA1339349. MA 28(3)454.
  2776. M Katouzian
    Delamination growth resistance of thermoplastic composites
    Masters, Missouri-Rolla, 1985.
  2777. Peter Issa Kattan
    Anisotropic finite plasticity model for continuum damage mechanics
    PhD, Louisiana SU, 1989. DA9025313. DAIB 51(4)1964.
  2778. RW Kauffman
    Analysis of cylindrically shaped filament wound reinforced thermosetting plastics
    Masters, Vanderbilt, 1985.
  2779. RK Kaul
    Compatibility problems generated in graphite fibre-metal matrix composites
    Masters, Tennessee Knoxville, 1984. PhD, Tennessee, 1984. DA8429603
  2780. MK Kaushik
    Design and development of glass fibre epoxy composite dies for sheet metal forming
    MTech, IIT-Madras, 1983.
  2781. Pantelis Artaxerxis Kavallieratos
    Nonlinear response of composite panels to random excitation
    PhD, (no university given), 1992.  AAD9313628  DAIB54(1)382
  2782. Abdolmehdi Kaveh-Ahangar
    Analysis of progressive damage in fibrous composite laminates
    PhD, RPI, 1990. DA9031800. DAIB 51(6)2977.
  2783. AK Kaw
    Shear-lag analysis of laminates with matrix damage and debonding
    Masters, Clemson, 1984.
  2784. AK Kaw
    Damage growth in composite laminates with interleaves
    PhD, Clemson, 1987. DA8803906.
  2785. J Kawamoto
    Rubber modified carbon fibre composite
    Masters, MIT, 1984.
  2786. R Kay
    The preparation and crosslinking reactions of some copolymers of styrene and maleic anhydride
    PhD, Lancaster, September 1967. D50519/84.
  2787. AC Kaya
    An orthotropic strip with an internal or edge crack under general loading conditions
    Masters, Lehigh, 1978.
  2788. Altan Kayran
    Free vibration analysis of laminated composite shells of revolution including transverse shear deformation
    PhD, Delaware, 1990. DA9101086. DAIB 51(10)5000.
  2789. R Keal
    Post-failure energy absorbing mechanisms of filament wound composite tubes
    PhD, Liverpool, September 1983. D56762/85.
  2790. Maria Denise Keal
    The effects of dual additive systems on the mechanical properties of aspen fibre/recycled high density polyethylene composites
    MS, Michigan SU, 1990. MA1342421. MA 29(2)317.
  2791. PE Keary
    A comparison of experimental mode I analysis methods for the interlaminar fracture toughness characterisation of graphite/epoxy composite materials
    MS, Oregon SU, April 1984.
  2792. WD Keat
    Development of a finite element program for an elastically non-linear anisotropic material undergoing large displacements and large strains
    Masters, Worchester PI, 1983.
  2793. KT Kedward
    The elastic behaviour of laminated, glass fibre reinforced plastics
    PhD, Wales: Cardiff, 1966.
  2794. JD Keenan
    Structure and dynamic mechanical properties of TGDDM-DDS epoxy, graphite fibres and their composites
    Masters, University of Washington-WA, 1979.
  2795. Mark W Keene
    Adhesive bonding of fibre reinforced plastics
    MSEng, Lowell, 1990. DA1340624. MA 28(4)634.
  2796. Charles Henry Keilers Jr
    Damage identification in composites using built-in piezoelectrics
    PhD, Stanford University, 1993.  AAD9326494  DAIB54(5)2609
  2797. Steven Ernest Keinath
    Effects of absorbed moisture on high-performance organic fibres
    PhD, Michigan TU, 1992. DA9220742. DAIB 53(2)1016.
  2798. S Kelham
    The thermal properties of glassy materials and composites.
    DPhil, Oxford, 1981. D36472/81.
  2799. AD Kelkar
    Analyses of quasi-isotropic composite plates under quasi-static point loads simulating low-velocity impact phenomena.
    PhD, Old Dominion, 1985. DA8615877.
  2800. S Kellas
    Notched fatigue of woven and non-woven CFRP
    MSc, London: ICST&M, September 1984.
  2801. S Kellas
    Environmental effects on fatigue damage in notched composites
    PhD, London: ICST&M, 1988.
  2802. M Kellenter
    Untersuchungen zur vereinfachung der fertigungstechnikn bei der herstellung von grossflachingen bauteilen aus glasfaser verstarkten kunststoffen
    [Study of simplification of fabrication technology for large GFRP component construction]
    Dissertation, RWTH Aachen, 1971. IKV DS71/03.
  2803. TS Keller
    Surface chemical modification of Kevlar fibres for enhancement of epoxy adhesion
    Masters, University of Washington-WA, 1983.
  2804. RL Keller
    Examination of high performance polymer fibres under compressive deformation
    Masters, AFIT WPAFB, December 1986. AFIT/GAE/AA/86D-5. AD A178 640. N87-22857.
  2805. RP Kelley
    Further examination and a local load-sharing extension of Coleman's time to failure model for fibre bundles
    PhD, Cornell, 1978. DA7902277.
  2806. WH Kelley
    Thermal shock resistance of mullite based silicon carbide whisker composites
    Masters, AFIT WPAFB, December 1986. AFIT/GAE/AA/86D-6. AD A179 214. N87-22809.
  2807. Kenneth G Kellogg
    Evaluating in-plane elastic constants of damaged carbon-epoxy laminates using a quantitative ultrasonic technique
    PhD, Utah State University, 1992.  AAD9316773  DAIB54(2)926
  2808. SR Kelly
    Characterisation of mechanical properties of a fibreglass composite
    Masters, Purdue, 1984.
  2809. BL Kelly
    Sorption and transport studies of untreated and treated MY720/DDS cured epoxy films
    Masters, NCSU, 1986.
  2810. SR Kelly
    Failure analysis of laminated composite angles.
    PhD, Purdue, 1987. DA8729751.
  2811. Jo Ellen Kelly
    A numerical and experimental investigation of the effects of thermal history on the structure property relationship of PPS/carbon fibre composites
    PhD, VPI&SU, 1991. DA9214584. DAIB 53(2)959.
  2812. BH Kelsic
    Study of heat transfer in unidirectional fibre reinforced composite
    Masters, Purdue, 1984.
  2813. DW Kenaga
    Elastic-plastic material characterisation and fatigue crack growth in unidirectional metal-matrix composites.
    Masters, Purdue, 1984.
  2814. KN Kendall
    Mould design for high volume resin transfer moulding
    PhD, Nottingham, September 1991.
  2815. RB Kendrick
    Hypervelocity impact to graphite/epoxy composite plates
    Masters, Texas @ Austin, 1985.
  2816. CT Keng
    A method for obtaining thermal stresses in composite plates caused by transient conduction
    Masters, Mississippi, 1978.
  2817. FJ Kennedy
    Analysis of non-symmetrically loaded anisotropic rotational shells including shear effects
    Masters, Akron, 1975.
  2818. JM Kennedy
    Influence of temper condition on the nonlinear behaviour of boron/aluminium
    Masters, VPI&SU, 1977.
  2819. I Kennedy
    Vibration transmissibility characteristics of fibre and steel reinforced flexible pipes
    PhD, Manchester: Victoria, 1987, D80229.
  2820. GM Kent
    X-ray and ESR characterisation of the effects of high energy radiation of graphite fibre reinforced composite materials
    MS, NCSU Raleigh, 1982. N83-16395.
  2821. Awdhoot Vasant Kerkar
    Investigation of steric stabilisation as a route for colloidal processing of silicon carbide/silicon nitride composites
    PhD, CWRU, 1990. DA9035285. DAIB 51(7)3478.
  2822. JM Kern
    The plastic deformation of an axially reinforced cantilever struck at its tip
    Masters, Cornell, 1973.
  2823. Gilbert Kerr
    Boundary value problems in rectilinearly anisotropic thermoelastic solids
    PhD, Old Dominion University, 1993.  AAD9402343  DAIB54(8)4193
  2824. D Kershaw
    Ablation studies on composite materials
    MSc, UMIST, 1972!.
  2825. MS Kerstetter
    Nonlinear viscoelastic characterisation of AS-3502 graphite/epoxy composite materials
    Masters, TA&MU, December 1980.
  2826. A Keshavarz-Valian
    Tensile strength of short fibre reinforced composites with circular cut-outs
    Masters, Missouri-Rolla, 1985.
  2827. AEl-MH Khafagy
    Acoustical and mechanical investigations on metallic and dielectric solid media
    PhD, London: Chelsea, 1985.
  2828. SA-M Khalil
    Analytical and experimental study of cracks emanating from an elliptical hole in a unidirectional composite material.
    PhD, Florida, 1984. DA8509948. N86-10567.
  2829. Amir Reza Khamseh
    Failure mechanisms in composite plates subjected to inplane compressive loading
    PhD, University of Michigan, 1994.  AAD9423229  DAIB55(4)1530
  2830. WA Khan
    Thermoelastic behaviour of elastically-isotropic thermally-anisotropic solids
    Masters, SDSMT, 1970.
  2831. KH Khan
    On the thermal expansion of unidirectional fibre composites and reinforcing graphite fibres
    PhD, NCSU Raleigh, 1976. DA7628494.
  2832. Zaffar M Khan
    A study of the drilling of advanced carbon fibre composites
    PhD, University of Salford, 1991.  AADD098225  DAIB53(10)5408
  2833. Shafiqul Islam Khandoker
    Improved analysis of laminated heterogeneous beams and associated formulation of a new finite element method
    PhD, TA&MU, 1988. DA8903362. DAIB 49(11)4989.
  2834. VD Khanna
    A study of the tribological properties of graphite-fibre glass-matrix composites
    PhD, Texas @ Austin, 1983. DA8414397. N84-33520.
  2835. SK Khanna
    Fracture toughness of fabric reinforced epoxy composites using J-integral approach
    MTech, IIT Kanpur, November 1984.
  2836. Sanjeev Kumar Khanna
    Effect of reinforcement and fiber-matrix interface on dynamic fracture of fiber reinforced composite materials
    PhD, University of Rhode Island, 1992.  AAD9239568  DAIB53(8)4326
  2837. Subhash Chandra Khatri
    Mechanical property enhancement of thicker section thermoplastic composites by hybridization
    PhD, Drexel, 1990. DA9030012. DAIB 51(6)3076.
  2838. Mozaffar Khazaee
    Acousto-ultrasonic evaluation of composite materials
    PhD, New Mexico State University, 1993.  AAD9417345  DAIB55(2)559
  2839. AA Khdeir
    Analytical solutions for the statics and dynamics of rectangular laminated composite plates using shearing deformation theories
    PhD, VPI&SU, 1986. DA8704682.
  2840. A Khebir
    Low frequency approximations for the effective properties of chiral composites
    Masters, Pennsylvania SU, 1986.
  2841. VV Khitrov
    Effect of orientation in the reinforcement plane on the load capability of compressed fibre composite plates
    Dissertation, Riga, 1972
  2842. MR Khoshgoftaar
    Finite element analysis of nonlinear heat transfer in multiphase media
    Masters, MIT, 1979.
  2843. NJ Khuri
    Elastic stability of orthotropic rectangular plates and plates with varying rigidities
    Masters, Kentucky, 1986.
  2844. NV Khval'kovskii
    Analysis of textile fibre fraction.
    Dissertation, Moscow, 1967.
  2845. W Kiang
    Controlled crack propagation in polymers
    DSc, Washington University-MO, 1974.
  2846. Haw-Jann Kiang
    Analysis and design of tensioned composite reflectors
    PhD, California: Berkeley, 1989. DA9028906. DAIB 51(5)2576.
    >>> WW-P Kiang, see WW-P King
  2847. RR Kieschke
    Titanium reinforced with SiC monofilaments
    PhD, Cambridge, 1990.
  2848. MC Kilpatrick
    The inclusion of damage effects in an incremental finite element analysis of composite plates
    Masters, TA&MU, 1984.
  2849. HC Kim
    Analytical prediction of mechanical behaviour and fatigue failure mechanisms in a unidirectional fibreglass composite
    Masters, CWRU, 1976.
  2850. HC Kim
    Fatigue performance characteristics and fatigue life limits of fibreglass composites
    PhD, CWRU, August 1978. DA7901524. N79-16074.
  2851. JW Kim
    Mechanical behaviour of composite materials in multiaxial stress fields
    PhD, Rutgers, 1979. DA7928413. N80-17144.
  2852. YK Kim
    On the mechanics of hybrid twisted fibrous structures
    PhD, NCSU Raleigh, 1981. DA8209475.
  2853. KS Kim
    Analysis of delamination in laminated composites.
    MS, KAIST-Seoul, 1982.
  2854. W Kim
    Stress analysis methods for clearance-fit mechanical joints in laminated composites
    PhD, RPI, August 1982. DA8303070. N83-36508.
  2855. KS Kim
    Analysis of delamination crack growth in graphite/epoxy angle ply laminated composites
    PhD, KAIST-Korea, May 1985.
  2856. PK Kim
    A vibrational study of high performance fibre and a model composite
    PhD, Massachussetts, 1986. DA8701181.
  2857. S-B Kim
    Multi-axial failure criteria in fibre composites application and to through-the-thickness strength of hybrid fibre laminates
    PhD, NCSU Raleigh, 1986. DA8624112. N87-21040.
  2858. HJ Kim
    Three-dimensional adaptive grid generation on a composite structure
    PhD, Mississippi SU, 1987. DA8728924.
  2859. J Kim
    Studies on liquid flow in fibrous assemblies.
    PhD, Princeton, 1987. DA8705022.
  2860. J Kim
    Thermo-mechanical behaviour of high temperature fibre composites
    PhD, Delaware, 1987. DA8719535.
  2861. WC Kim
    Reinforced concrete using new fibreglass reinforced plastic rods
    Masters, California: Davis, 1987.
  2862. Yong Hyup Kim
    A three-dimensional solid element model for finite rotation of composite shells
    PhD, Maryland, 1989. DA9021527. DAIB 51(3)1373.
  2863. Chang-Gyou Kim
    The microstructure of sphere-filled composites
    PhD, South Carolina, 1990. DA9101472. DAIB 51(8)3962.
  2864. Junil Kim
    Computer modelling and analysis of anisotropic material flow in compression moulding of short-fibre reinforced composite material
    PhD, Ohio SU, 1990. DA9031094. DAIB 51(7)3519.
  2865. Taewoo Kim
    Fabrication and design of silicon carbide whisker reinforced mullite composites
    PhD, Pennsylvania SU, 1990. DA9032314. DAIB 51(6)2977.
  2866. Young Roak Kim
    Behaviour of fibre reinforcements and resin flow during the injection-pultrusion process
    Dr Eng, Lowell, 1990. DA9117501. DAIB 52(1)364.
  2867. Chulsoo Kim
    Deformation behaviour and microstructure of tantalum, and processing of carbon-tantalum carbide composites
    PhD, Michigan SU, 1991. DA9129469. DAIB 52(5)2729.
  2868. Jong Heon Kim
    Fabric mechanics analysis using large deformation orthotropic shell theory
    PhD, NCSU Raleigh, 1991. DA9206140. DAIB 52(9)4821.
  2869. Nam-Eung Kim
    Analytical and experimental investigation of vibratory response in adhesively bonded and composite structures
    PhD, Carnegie-Mellon, 1991. DA9207280. DAIB 52(9)4935.
  2870. Youngman Kim
    Cyclic thermal shock in ceramics and ceramic matrix composites
    PhD, Michigan SU, 1991. DA9134138. DAIB 52(6)3238.
  2871. Wone-Chul Kim
    Fracture mechanisms and fracture control in composite structures
    PhD, University of California - Berkeley, 1991.  AAD9228716  DAIB53(5)2504
  2872. Hong Gun Kim
    Micromechanics of deformation in short fiber or whisker reinforced metal matrix composites
    PhD, University of Massachusetts, 1992.  AAD9233082  DAIB53(6)3114
  2873. Seonghun Kim
    Development of aromatic copolyester thermoplastic liquid crystal polymer fiber and polyimide composite materials
    PhD, University of Lowell, 1992.  AAD9305332  DAIB53(10)5227
  2874. Taehyoun Kim
    Nonlinear large amplitude structural and aeroelastic behavior of composite rotor blades at large static deflection
    PhD, Massachusetts Institute of Technology, 1992.  AAD0572154  AAD9233082  DAIB53(6)3002
  2875. Yong Woo Kim
    Elastic wave scattering by partially debonded or partially coated fibers
    PhD, Pennsylvania State University, 1992.  AAD9226720  DAIB53(5)2393
  2876. Chun-Do Kim
    Analyses of laminated composite, hollow drive shafts
    PhD, University of Oklahoma, 1993.  AAD9410278  DAIB54(11)5902
  2877. CE Kim
    Composites cost modelling: complexity
    MS(ME), Massachusetts Institute of Technology, May 1993
  2878. Deokjoo Kim
    Macro-micro interation type instability failures of laminated thick section composite cylinders subjected to hydrostatic loading
    PhD, University of Utah, 1993.  AAD9316810  DAIB54(1)447
  2879. Gun-In Kim
    Optimization of stiffened panels for buckling using a simplified linked plate method
    PhD, University of Washington, 1993.  AAD9417039  DAIB55(2)559
  2880. In-Gul Kim
    A smart composite panel based on piezoelectric sensors
    PhD, Pennsylvania State University, 1993.  AAD9334758  DAIB54(7)3768
  2881. Kong Hwan Kim
    Study of the fiber/matrix interface in silicon carbide (Nicalon) fiber-reinforced calcium aluminosilicate matrix composites
    PhD, Stevens Institute of Technology, 1993.  AAD9328515  DAIB54(5)2691
  2882. Yong-Yun Kim
    Transient elastic waves in anisotropic media
    PhD, University of Cincinnati, 1993.  AAD9329959  DAIB54(6)3301
  2883. Young-Gyu Kim
    Fabric manipulation simulation including material nonlinearity and contact
    PhD, North Carolina State University at Raleigh, 1993.  AAD9327000  DAIB54(5)2709
  2884. Young Ik Kim
    A model for dynamic and aeroelastic response of composite structures with damage evolution
    PhD, Texas A&M University, 1993.  AAD9410819  DAIB54(11)5792
  2885. Cheol Kim
    The theory of anisotropic thin and thick walled closed cross section beams with coupled elastic deformations
    PhD, University of Illinois at Urbana-Champion, 1995.  AADAAI9522131  DAB56(3)1555.
  2886. Youngchan Kim
    A layer-wise theory for linear and failure analysis of laminated composite beams
    PhD, West Virginia University, 1995.  AADAAI9543860  DAB56(8)4476
  2887. G Kimmerle
    Koordinatenmessvorrichtung fur eine Wickelanlage.
    [Co-ordinate measurement for a winding installation]
    Experimental thesis, IKV, current in 1984. S7834.
  2888. SK Kincannon
    Bending-extensional coupling of cross-plied elliptical plates with different properties in tension and compression
    Masters, Oklahoma, 1979.
  2889. WW-P King
    Manufacture of glass filler reinforced polystyrene via emulsion polymerisation
    MS, Washington University-MO, 1972.
  2890. RL King
    The manufacturing aspects of advanced composite materials.
    MTech, Brunel, 1980.
  2891. Julia Ann King
    Development and evaluation of surface treatments to enhance the fibre-matrix adhesion in PAN-based carbon fibre/liquid crystal polymer composites
    PhD, Wyoming, 1989. DA9016663. DAIB 51(2)870.
  2892. Todd Richard King
    Characterization and enhancement of the fibre-matrix adhesion in pitch-based carbon fibre/epoxy matrix composites
    PhD, Wyoming, December 1989. DA9016664. DAIB 51(2)941.
  2893. Yiefan King
    Delamination analysis of a laminated composite tapered beam
    PhD, Texas @ Arlington, 1991. DA9131750. DAIB 52(5)2641.
  2894. RL King
    <Statistical determination of design data for advanced composites>
    PhD proposal, Surrey, 7 July 1986.
  2895. Edward King
    <Dielectric viscosity monitoring systems>
    SM(ME), MIT, in preparation for 1993.
  2896. JC Kingery
    Composite process modelling: consolidation of aligned fibre assemblies
    SM(ME), MIT, June 1985.
  2897. HB Kingsbury
    Stresses and deformations in anisotropic shells
    PhD, Pennsylvania, 1964. DA6505775.
  2898. DE Kinser
    The synthesis of a laminated plate for high temperature application
    Masters, Case IT, 1965.
  2899. Stephen Paul Kinsey
    A numerical thermal model for the cure cycle of an advanced composite material
    PhD, Texas @ Arlington, 1991. DA9208299. DAIB 52(10)5465.
  2900. LJ Kiraly
    Dynamic response of an orthotropic shell to ballistic pressure loading
    Masters, VPI&SU, 1974.
  2901. K-W Kirberg
    Dimensionierung und Prufung eines CFK-Hybrid-pleuels
    [Design and testing of a single hybrid CFRP connecting rod]
    Diplomarbeit (not dissertation), IKV-Archiv-Nr-D8427, 1984!.
  2902. K-W Kirberg
    Konzept zur Prozesssimulation der Faserwickeltechnologie
    [Process simulation concept for filament winding technology]
    Doctorate, RWTH Aachen, 1988.
  2903. CJ Kirk
    In-plane bending characteristic of glass reinforced plastic pipes having tee joints
    MSc, UMIST, November 1977. D74719/87.
  2904. CJ Kirk
    Effect of geometric design parameters on flexural behaviour of glass reinforced plastic pipe intersections.
    PhD, UMIST, March 1980. D71449/87.
  2905. BA Kirulis
    Strength of bond in reinforced plastics
    Dissertation, Riga, 1977.
  2906. M Kishimoto
    <detonation testing of filament wound tubes>.
    MSc, Manchester, 1978.
  2907. NN Kishore
    Development of high damping composites through imperfect bonding
    PhD, IIT Kanpur, 1979.
  2908. Akihiko Kitano
    Stress-induced structural changes in thermoplastic composites
    PhD, Univ Washington-WA, 1991. DA9203270. DAIB 52(9)4753.
  2909. Carol Ann Kittredge
    Static response of cord composite plates
    PhD, UIUC, 1991. DA9210872. DAIB 52(11)5919.
  2910. YuI Kizima
    Flexural fatigue of woven fibreglass at acoustic vibration frequencies
    Dissertation, Tech.Sci-Riga, 1972.
  2911. EC Klang
    The stress distribution in pin-loaded orthotropic plates.
    PhD, VPI&SU, August 1983. DA8406626. N84-27059.
  2912. A Klarbring
    Contact problems in linear elasticity: friction laws and mathematical programming applications
    PhD, Linkoping-Sweden, August 1985.
  2913. HE Klei
    Thermal and mechanical characterisation of polyetheretherketone
    Masters, University of Washington-WA, 1984.
  2914. RJ Klein
    Strain measurements in composites subjected to compressive loading using Moiré interferometry
    Masters, University of Washington-WA, 1987.
  2915. B Kleinemeier
    Prozessrechnereinsatz in der statischen und dynamischen kunststoffpruefung
    [Analytical procedures in static and dynamic testing of plastics]
    Dissertation, RWTH Aachen, 1979. DS7901.
  2916. R Kleinholz
    Beitrag zum verstarkten von kunststoffen unter besonderer berucksichtigung der verstarkungs- und matrixwerkstoffe
    [Reinforcement of plastics with special consideration for the reinforcing and matrix materials]
    Dissertation, RWTH Aachen, 1971. DS7106.
  2917. MJ Kleinosky
    An investigation of adhesive fracture of fibre-reinforced composite materials
    Masters, Pittsburgh, 1983.
  2918. Eric M Klier
    Fabrication of cast particulate reinforced metals via pressure infiltration
    SM, MIT, 1988.
  2919. HS Kliger
    Conical shells of pyrolytic graphite type materials.
    Masters, Delaware, 1967.
  2920. HS Kliger
    Stresses in shallow spherical shells of composite materials subject to localised loads
    PhD, Delaware, 1970. DA7106440.
  2921. JW Klintworth
    Dynamic crushing of cellular solids
    PhD, Cambridge, 1988/89.
  2922. Donald A Klosterman
    Development of an intensity based fiber optic sensor and predictive models for in situ void detection during polymer composite cure
    PhD, University of Dayton, 1994.  DAB56(4)2263.
  2923. H-E Kluetsch
    GFK-Querlenker  [GRP transverse guide rod]
    Diplomarbeit (not dissertation), IKV-Archiv-Nr-D8216, 1982!.
  2924. Michael Andrew Kmetz
    Chemical vapor deposited fiber coatings and chemical vapor infiltrated ceramic matrix composites
    PhD, University of Connecticut, 1992.  AAD9233007  DAIB53(6)2858
  2925. JF Knauss
    The effects of cutouts on the compression failure of graphite/epoxy composites
    Masters, VPI&SU, 1978.
  2926. IV Knets
    The deformation and fracture of human compact bone.
    Doctorate, Tech.Sci-Riga, 1977.
  2927. CE Knight
    Anisotropic photoelastic analysis of fibre reinforced composite materials
    Masters, Tennessee, 1967.
  2928. CE Knight
    Orthotropic photoelasticity for fibre reinforced composite material
    PhD, Tennessee, 1974. DA7427217.
  2929. GK Knight
    The structural response of fibreglass reinforced plastic pipe under earth loadings
    Masters, Utah SU, 1984.
  2930. John Costain Knight III
    Consolidation and relaxation behavior of continuous strand random glass mats with thermoplastic binders
    MS, Michigan State University, 1994.  AAD1357913  MA33(1)223
  2931. GM Knoblach
    Using electric fields to control fibre orientation during manufacture of composite materials
    Bachelors thesis, MIT, June 1985.
  2932. MA Knott
    The detection and effect of fabrication damage in boron-aluminium composites
    Masters, VPI&SU, September 1976.
  2933. Brian Joseph Knouff
    The effects of thermal cycling on the damage evolution and property changes in graphite fiber-reinforced epoxy-cyanate blend matrix laminates
    PhD, University of Cincinnati, 1994.  AAD9502516  DAIB55(9)4060
  2934. C-H Ko
    Failure theories for orthotropic materials
    Masters, Colorado SU, 1972.
  2935. C-RC Ko
    Failure determination for a laminated composite plate with a circular hole
    Masters, TA&MU, 1975.
  2936. KK-Y Ko
    Pitch and structure relationship of cholesteric liquid crystals
    Masters, Temple, 1975.
  2937. FK-F Ko
    Nonlinear viscoelasticity of polyamide fibres
    PhD, Georgia IT, 1977. DA7714255.
  2938. YS Ko
    Fibre-polymer interactions in graphite fibre epoxy composites
    PhD, Pennsylvania, 1978. DA7816319. N79-10146.
  2939. RW Ko
    Use of shear lag for composite microstress analysis-rectangular and linear arrays
    Masters, UCLA, 1984.
  2940. Siu-Ping Ko
    Compressive behaviour of laminated composite structures
    PhD, Nebraska: Lincoln, 1989. DA9004684. DAIB 50(9)4083.
  2941. March Ming-Chi Ko
    Mechanical properties of aligned short carbon fibre reinforced epoxy
    MASc, University of Toronto, 1992.  AADMM78638  MA31(4)1857
  2942. Ray-Tse Ko
    Ultrasonic evaluation of interfacial properties in imperfect anisotropic layered substrates
    PhD, Ohio State University, 1993.  AAD9316186  DAIB54(2)878
  2943. Brice Paul Guy Koch
    Biodegradable composites based on regenerated cellulosic fibers:  research and development for a new biomaterial
    Developpement d'un nouveau composite biodegradable: exemples concernant son procede de fabrication, son comportement lors de sa  degradation et ses utilisations
    DrScTech, Eidgenossische Technische Hochschule Zuerich - Switzerland, 1993.  AADC359649  DAIC55(3)806
  2944. NK Kochar
    Finite element and experimental investigation of delamination and debonding of composite materials under mode II static and fatigue loadings
    Masters, Missouri-Rolla, 1986.
  2945. David Barrie Koconis
    Shape control of composite plates and shells using embedded actuators
    PhD, Stanford University, 1993.  AAD9317781  DAIB54(2)954
  2946. Donald H Koedam
    Tensor polynomial failure criteria for composite materials
    MSE, University of Alabama in Huntsville, 1993.  AAD1355907 MA32(4)1199
  2947. JB Koeneman
    Interfibre failure of composite materials
    PhD, CWRU, 1970. DA7025879.
  2948. LJ Kok
    Effects of atomic oxygen on polymeric based materials
    Masters, Toronto, 1986.
  2949. M Kokabi
    Fibre reinforced plastic pipes
    MSc, UMIST, 1986. D75300/87.
  2950. B Kokukonda
    Fatigue response of silicon carbide whisker/aluminium matrix composites
    PhD, Pennsylvania SU, 1985. DA8516047.
  2951. RF Kolberg
    Investigation into finite element analyses of designs with randomly oriented continuous fibre reinforced thermoplastic composite sheet
    Masters, RPI, 1987.
  2952. M Kolkowski
    The effects of heterogeneities on glass fibre strengths
    Masters, CWRU, 1986.
  2953. Paul Christopher Kolosick
    Interfacial adhesion in lignocellulosic-polypropylene composites
    PhD, University of Wisconsin - Madison, 1992.  AAD9231207  DAIB53(9)4814
  2954. K Komaki
    Effects of stress and temperature on the electrical resistance of carbon fibres
    PhD, Washington University-MO, 1980. DA8026259. N81-10108.
  2955. Paisan Kongkachuichay
    Techniques for processing composites of silicon carbide-aluminum ozide and silicon nitrate-aluminum oxide
    PhD, Texas A&M University, 1992.  AAD9232525  DAIB53(6)3026
  2956. TS Konicek
    A method to determine three-dimensional fibre orientation in fibre reinforced polymers
    MS, UIUC, 1987.
  2957. HJ Konish
    A study of fracture phenomena in fibre composite laminate
    PhD, Carnegie-Mellon, April 1973. DA7322871.
  2958. M Konopasek
    Improved procedures for calculating the mechanical properties of textile structures
    MSc, UMIST, 1971!.
  2959. Raghunandan Suryaprasada Konuru
    Analysis of thermally conductive fiber reinforced polymer matrix composites
    MS, University of Nevada - Reno, 1993.  AAD1355498   MA32(3)1049
  2960. EY Koo
    Corrosion behaviour of silicon carbide/aluminium metal matrix composites
    Masters, Texas @ Austin, 1987.
  2961. JR Kopf
    Applications of the fracture properties of a composite material to development of a reliability plan
    Masters, AFIT, 1970.
  2962. Michael Warren Kopp
    Understanding the kinetics of interdiffusion and interphase reactions in metallic and intermetallic matrix composites
    PhD, Texas @ Austin, 1992. DA9225637. DAIB 53(4)2011.
  2963. SN Kordas
    Design of a laser machine tool for processing of advanced materials
    Masters, MIT, 1986.
  2964. Uri Korin
    The creep superposition principle and its application to the prediction of creep of certain glass-reinforced polyester laminates
    PhD, Southampton, 1969!.
  2965. MT Kortschot
    <EMI shielding with nickel coated mica composites>
    BASc, Toronto, 1984.
  2966. MT Kortschot
    Damage mechanics of carbon fibre composites
    PhD, Cambridge, 1988. ASLIB 38(2)3258.
  2967. B Korukonda
    Fatigue response of silicon carbide whisker/aluminium matrix composites
    PhD, Pennsylvania SU, 1985. DA8516047. N86-21591.
  2968. BA Kosmal
    Buckling analysis of laminated anisotropic cylinders under combined loading
    MS, AFIT @ WPAFB, June 1971. GAW/MC/71-10. AD 741 455. N72-29938.
  2969. JB Kosmatka
    Structural dynamic modelling of advanced composite propellors by the finite element method
    PhD, UCLA, 1986. DA8702598.
  2970. H Kossira
    Der einfluss von faserdurchmesser und glasgehalt auf die festigkeit harzgebundener glasfaserstranger
    [Influence of fibre diameter and volume fraction on GFRP strength]
    Dissertation, TH Stuttgart, March 1963.
  2971. DM Kotchick
    Strength distributions for silicon carbide and c-axis sapphire filaments
    Masters, Pennsylvania SU, 1975.
  2972. Temel Kotil
    Ceramic composites: experimental and analytical study of silicon carbide/silicon nitride composites
    PhD, Michigan, 1991. DA9135626. DAIB 52(9)4936.
  2973. Rolf Kotte
    Der Resin Transfer Molding-Prozess: Analyse Eines Harzinjectionsverfahrens
    Dissertation, RWTH Aachen, 1991. Verlag TUV Rheinland GmbH, Koln, 1991. ISBN 3-8249-0033-5.
  2974. Mohamed Wahid Kouider
    The effect of sliding interfaces and inhomogeneous interphases on thermal and elastic properties of composites
    PhD, Michigan SU, 1992. DA9223208. DAIB 53(3)1568.
  2975. NB Koumbis
    Dynamic properties of carbon fibre reinforced plastics subjected to acoustic excitation
    MSc, ISVR Southampton, 1984.
  2976. Jeffrey Victor Kouri
    Improved finite element analysis of thick laminated composite plates by the predictor corrector technique and approximation of C(1) continuity with a new least squares element
    PhD, Georgia IT, 1991. DA9124531. DAIB 52(3)1536.
  2977. PN Kousiounelos
    Fracture of graphite fibre composites
    Masters, MIT, 1976.
  2978. PN Kousiounelos
    Dynamic crack propogation in unidirectional fibre composites
    Sc.D, MIT, 1979.
  2979. EJ Kovac
    Forced nonlinear damped vibration of a symmetric three-layer composite beam
    PhD, Michigan, 1970. DA7104654.
  2980. PM Kovach
    Electrochemistry at microcylinder electrodes.
    PhD, Indiana, 1986. DA8617783.
  2981. IM Kowalski
    Determination of the elastic properties of orthotropic and anisotropic materials using a minimum number of tensile tests.
    Masters, RPI, May 1979.
  2982. C Kozlowski
    X-ray photoelectron spectroscopic studies of carbon fibre surfaces
    PhD, Newcastle upon Tyne, August 1984. D76238. ASLIB 37(2)2999.
  2983. E Krabbe
    Messungen von Gleit- und Dehnungszahlen an Holzstaeben mit rechteckigen Querschnitten
    [Measurement of shearing and elongation coefficients of wooden slats with rectangular section]
    Dissertation, Hannover TH, 1960.
  2984. TM Krafchak
    Residual static torsional strength of composite shafts after simulated impact damage
    Masters, RPI, 1985.
  2985. ED Kragness
    Processing and mechanical behaviour of tape cast and laminated silicon carbide whisker/alumina composites
    Masters, Pennsylvania SU, 1988.
  2986. Martin Krammer
    Relations between the properties of homogeneous materials and the properties of composite materials which are made our of them by means of extrusion-pressing
    Zusammenhange zwischen den eigenschaften von honogenen werkstoffen und den eigenschaften der durch strangpressen aus ihnen hergestellten teichverbundwerkstoffe
    DrTechn, Technische Universitaet Wien - Austria, 1989.  AADC257503  DAIC53(4)788
  2987. Mark D Kranjc
    Processing of continuous fiber composites using thermoplastic polyimide matrix resins
    PhD, University of Akron, 1993.  AAD9319677  DAIB54(2)860
  2988. Robert Fisher Kraus
    Design and experimental studies on supercritical composite power transmission shafting
    PhD, RPI, 1988. DA8917475. DAIB 50(5)2117.
  2989. UE Krauya
    Features of micro- and macrofracture of human compact bone tissue
    Dissertation, Tech.Sci-Riga, 1979.
  2990. JC Krawiec
    A study of process innovations in the manufacture of composite material components in the aerospace industry.
    Masters, MIT, 1985.
  2991. AF Kregers
    Deformation of polymer and composite materials under complex loads
    Doctorate, Riga, 1983.
  2992. G Kreis
    Rechnerunterstuetze Auswertung von Roentgenaufnahmen zur Bestimmung und Faserorientierungen in GFK-Bauteilen
    [Computer-aided evaluation of X-ray absorption for specification and fibre orientation in GRP members]
    Diplomarbeit (not dissertation), IKV Aachen, 1984.
  2993. John Michael Kremer
    Large reference displacement analysis of composite plates
    PhD, Illinois: Chicago, 1991. DA9213109. DAIB 52(12)6621.
  2994. GR Kress
    Fatigue response of notched graphite/epoxy composites.
    MS, VPI&SU, May 1983.
  2995. G Kretsis
    Strength of bolted joints in GFRP
    MSc, London: ICST&M, September 1983.
  2996. G Kretsis
    Mechanical characterisation of hybrid glass/carbon fibre-reinforced plastics
    PhD, London: ICST&M, February 1987. ASLIB 38(1)2003.
  2997. V Krishnamurthy
    RF plasma modification of glass fibre polyphenylene sulphide interface
    PhD, Drexel, 1988. DA8820665. DAIB 49(8)3384.
  2998. A Krishnan
    Investigations on some finite element models.
    PhD, IIT Madras, 1985.
  2999. G Krishnasamy
    A combined finite element-boundary element method for the two-dimensional stress analysis of orthotropic materials
    Masters, Iowa SU, 1987.
  3000. RD Kriz
    Mechanical properties for thick fibre reinforced composite materials having transversely isotropic fibres
    Masters, VPI&SU, 1976.
  3001. RD Kriz
    Effects of moisture, residual thermal curing stress and mechanical load on the damage development in quasi-isotropic laminates
    PhD, VPI&SU, January 1980. DA8020212. N80-31476.
  3002. Susan Marie Krolewski
    An economics based model to evaluate advanced composite fabrication technologies
    PhD, MIT, February 1989. DA-379664.
  3003. NJ Krone
    Divergence elimination with advanced composites
    PhD, Maryland, December 1974. DA7514306. N75-28137.
  3004. SJ Kroon
    The application of GLARE in wing-fuselage front spar attachment fitting lugs: a feasibility study
    Thesis, Delft University of Technology, March 1990
  3005. Eugene Krug
    The effect of interfacial chemistry upon the mechanical properties of injection molded silicon carbide whisker/reaction bonded silicon nitride composites
    PhD, Rutgers University: State University of New Jersey at New Brunswick, 1993.  AAD9333417 DAIB54(7)3799.
    >>> R de Kruijff, see R De-Kruijff.
  3006. AA Kruklin'sh
    Structural theory of fabric-reinforced plastics
    PhD, Riga, 1985.
  3007. JW Krynicki
    <load-deflection tests of ceramic matrix composites>
    MSc, John Hopkins Univ, 1989.
  3008. Joseph Walter Krynicki
    Nondestructive characterization of ceramic matrix composites
    PhD, Johns Hopkins University, 1992.  AAD9229351  DAIB53(5)2490
  3009. M Krywonis
    Mica reinforced polymer blends
    Masters, Toronto, 1977.
  3010. W Ku
    Fast curing epoxy-episulphide resin for use at room temperature
    PhD, Connecticut, 1981. DA8207054.
  3011. Kazunao Kubotera
    Morphological and fracture studies of alloys of thermosets and thermoplastics
    PhD, University of Michigan, 1995.  AADAAI9543885  DAB56(8)4348
  3012. Thomas J Kubr
    Stresses near a change of thickness in a continuous fibre composite plate
    Eng, California IT, 1990. DA9107388. DAIB 51(10)4931.
  3013. NJ Kudva
    Postbuckling studies of curved laminates composite panels.
    PhD, VPI&SU, 1979. DA7925374.
    >>> Y Kuei-Hsiung, see KH Yang.
  3014. K-W Kuenen
    Das stossdurchschlagverhalten von Epoxidharz nach unterschiedlicher elektrischer Vorbelastung
    [Resistance of epoxy resins subjected to various electrical loads]
    Dissertation, Hannover, 1980.
  3015. BJ Kuhansedgh
    Fabrication stresses and crack morphology of three- dimensional cylindrically woven carbon-carbon composites
    Masters, UCLA, 1981.
  3016. FJ Kuja
    Theoretical modelling of creep behaviour in anisotropic tubes
    Masters, Toronto, 1979.
  3017. VM Kukovyakin
    Investigation of the possibility of using thermally stable compounds for the assembly of nondetachable cylindrical joints
    Dissertation, Moscow, 1969.
  3018. BA Kukushkin
    Research in the field of glass-plastic technology.
    Dissertation, Moscow, 1970.
  3019. AS Kular
    Study of behaviour of latex modified beams reinforced with fibreglass bars
    Masters, Texas @ Austin, 1977.
  3020. GM Kulikov
    Elastic laminar anisotropic shells of revolution of simple and complex shape
    Dissertation, Phys.Math.Sci-Moscow, 1981.
  3021. HT Kulkarni
    On the elastic-plastic fracture analysis of advanced fibre composite materials
    PhD, Tennessee @ Knoxville, 1976. DA7624838
  3022. SV Kulkarni
    Mechanics of delaminations in layered cylindrical shells
    PhD, VPI&SU, August 1972. DA7310348.
  3023. CR Kulp
    Investigation of modulus decrease in glass fibre reinforced plastics using interrupted fatigue tests
    Masters, Kansas, 1979.
  3024. K Kumar
    On the vibration and buckling of orthotropic plates of variable thickness
    Masters, McMaster, 1973.
  3025. A Kumar
    Analytical and numerical solutions for mass diffusion in a composite cylindrical body
    PhD, Ohio SU, 1980. DA8022302.
  3026. MR Kumar
    Experimental characterisation of mechanical behaviour of cord-rubber composites
    MS, Oklahoma, June 1981.
  3027. A Kumar
    Computer aided design of laminated composite structure
    Masters, Arizona SU, 1986.
  3028. N Kumar
    Structural optimisation of laminated composite plates and cylindrical panels
    Masters, Kentucky, 1988.
  3029. Sandeep Kumar
    A constitutive equation for creep in glassy polymers and composites
    MS, Rice, 1988. DA1334856. MA 27(2)289.
  3030. Anil Kumar
    Silica glass composites with aligned fibres
    MS, Lowell, 1990. MA1342547. MA 29(2)298.
  3031. Vijaya Kumar
    Linear and nonlinear dynamic analysis of fiber reinforced laminated shells
    PhD, University of Western Ontario, 1994.  AADAAINN93246  DAB56(1)472.
  3032. C Kumaraswamy
    Performance evaluation of glass fibre composite cable for prestressing concrete units
    Masters, SDSMT, 1988.
  3033. KE Kumlin
    Studium av urea-formaldehydharts [Study of UF resins]
    Tekn.dr, Chalmers TH, 1980.
  3034. RJ Kundrat
    Fatigue studies of hybrid composites
    Masters, Illinois IT, 1981.
  3035. Dar-Ning Kung
    Fatigue life prediction and characterization of composite materials
    PhD, Maryland, 1989. DA8924186. DAIB 50(7)3111.
  3036. JS Kunkel
    Effect of fibre diameter on the reliability of composites: automatic laser diffraction implementation
    Masters, NPS Monterey, 1987.
  3037. SC Kunz
    Microcrack growth during compressive fatigue in graphite fibre epoxy resin systems
    MS(Eng), UCLA, March 1974.
  3038. SC Kunz
    The toughening of epoxy-rubber particulate composites
    PhD, Cambridge, 1977-78.
  3039. JTC Kuo
    Experimental studies of composite members subjected to torsion
    Masters, Maryland, 1971.
  3040. YME Kuo
    Elastic torsion of composite materials
    PhD, Cornell, 1974. DA7417116.
  3041. A-Y Kuo
    Dynamic analysis of interfacial cracks in composite laminates
    PhD, UIUC, 1982. DA8302916.
  3042. C-C Kuo
    Recursion formulae and limit theorems for the lifetime distribution of a model fibrous composite
    PhD, Cornell, 1983. DA8328645. N84-20645.
  3043. C-M Kuo
    Nonlinear elastic behaviour of flexible composites
    MS, Delaware, December 1986.
  3044. Chang-Hung Kuo
    On the mechanics of contact and fracture analysis of multilayered composites
    PhD, Northwestern University, 1992.  AAD9309395.  DAIB53(11)5808
  3045. Chen-Ming Kuo
    Selected two-dimensional static and dynamic problems in anisotropic elastic and piezoelectric media
    PhD, Stanford University, 1992.  AAD9234126  DAIB53(7)3728
  3046. Wen-Shyong Kuo
    Damage of multi-directionally reinforced ceramic-matrix composites
    PhD, University of Delaware, 1992.  AAD9301765  DAIB53(11)5939
  3047. Jeffrey Aaron Kurland
    Strength optimization of laminated composite structures
    PhD, Stanford University, 1994.  AAD9429957  DAIB55(7)2972
  3048. DS Kurtz
    Molecular preferred orientation in high modulus carbon fibre produced from mesophase pitch
    Masters, RPI, 1985.
  3049. AKh Kurzemnieks
    Structure, deformation properties and fracture of UHM fibres and organic fibre reinforced plastics
    Dissertation, TS-Riga, 1983.
  3050. Artur Stanislaw Kurzydlo
    A stochastic model for behavior analysis of fiber reinforced quasi-brittle materials
    PhD, Illinois Institute of Technology, 1992.  AAD9311941  DAIB53(12)6440
  3051. AK Kush
    The interfacial viscoelastic properties from longitudinal wave experiments
    Masters, Illinois IT, 1980.
  3052. Zafer Sukru Kutlu
    Compression response of laminated composite panels containing multiple delaminations
    PhD, Stanford, 1991. DA9122556. DAIB 52(3)1537.
  3053. JJ Kutz
    Development of a process for the evaluation of directional fabric formability
    MS, Drexel University, 1990
  3054. VM Kuznetsova
    Thesis, Kharkov, 1968.
  3055. KC Kvam
    Nuclear irradiation effects on a metal matrix composite.
    Masters, MIT, 1970.
  3056. RG Kvaternik
    A review of aeroelastic and aerospace structural dynamics
    Masters, Case IT, 1966.
  3057. Joseph Kai-Cho Kwan
    Health hazard evaluation of the postcuring phase of graphite composite operations at the Lawrence Livermore National Laboratory
    DEnv, UCLA, 1990. DA9028353. DAIB 51(5)2264
  3058. P Kwizera
    Mechanical, electrical and optical properties of intercalated graphite fibres
    PhD, MIT, 1981.
  3059. KYS Kwoh
    Large deflections of circular sandwich plates with built-in edges
    Masters, Tennessee TU, 1967.
  3060. JP Kwolek
    Fibre reinforcement of high ceramic copper-based metallic friction materials
    Masters, RPI, 1965.
  3061. YW Kwon
    Finite element methods for plate bending
    PhD, Rice, 1985. DA8517219. N86-16606.
  3062. D Kyriacos
    Cross-linked polyesters: investigation of the structure of commercial polymers based on terephthalic acid
    PhD, Loughborough, July 1977.
  3063. N Labonte
    Renforcement du polypropylene par l'amiante au moyen de resines phenoliques
    [Reinforcement of polypropylene with asbestos through use of phenolic resins]
    Masters, Sherbrooke, 1977.
  3064. P Labossiere
    Analyse par elements finis de plaques de materiaux composites
    [Finite element analysis of composite material plates]
    Masters, Sherbrooke, 1983.
  3065. P Labossiere
    A new failure criterion for fibre-reinforced composite laminae
    PhD, Alberta-Canada, 1987.
  3066. Marcos Labronici
    Effect of silicone interlayer on carbon fiber reinforced PMR-15 composite:  processing and characterization
    PhD, Case Western Reserve University, 1994.  AAD9425527  DAIB55(4)1648
  3067. RJ Lacey
    The optical and electronic properties of polydiacetylene crystals under hydrostatic pressure
    PhD, London: QMC, 1983.
  3068. MR Lachman
    Advanced moulding compounds for use in dimensionally critical applications
    Masters, MIT, 1985.
  3069. SL La Colla
    The development of reinforced thermoplastics for orthotic applications
    Masters, RPI, 1984.
  3070. SJ La-Combe
    Finite element analysis of delaminations in an orthotropic beam
    Masters, Bradley, 1985.
  3071. Valerie Lacrampe
    The effect of sizing on the interfacial regions in polyepoxy/glass fibers composites
    Influence du type d'ensimage sur la nature des zones interfaciales dans les materiaux composites polyepoxyde/fibres de verre
    Dr, Institut National des Sciences Appliques de Lyon, 1992.  AADC299190  DAIC54(3)863
  3072. BL Lacrosse
    Comportement theorique et experimentale des tuyaux enterres en polyesters renforce de fibre de verres
    [Theoretical and experimental loading study of buried GRP pipes]
    Dissertation, Liege, 1976.
  3073. Dana Allen Ladnier
    Effects of porosity and fibre volume fraction on the elastic and ultrasonic properties of fibre-reinforced composite materials
    MS, Mississippi State University, 1992.  AAD1351155  MA31(3)1251
  3074. M-H Lafitte
    Caracterisation de la fibre aramide Kevlar 29: etude du comportement et des proprietes mecaniques en tension et en torsion.
    DIng, EMP Evry, 3 July 1981.
  3075. M Lafond
    Thermal behaviour of fibre composite materials subjected to pulse solicitations
    These de Doctorat de 3eme cycle, Paris VI, 1979.
  3076. PA Lagace
    Static tensile behaviour of cross-plied graphite/epoxy laminates with holes
    S.M, MIT, September 1979.
  3077. PA Lagace
    Static tensile fracture of graphite/epoxy
    PhD, MIT, April 1982. Report: 82-4.
  3078. Leon Lagendijk
    Preliminary design of a pressurised composite sandwich fuselage
    Thesis, Delft UT, March 1991.
  3079. F Laghouati
    Fissuration en fatigue du polyethylene haute densite
    [Fatigue failure of high density polyethylene]
    These de 3eme cycle, UT Compiegne, 1977.
  3080. M Lahaye
    Contribution de la microanalyse par spectrometrie X a l'etude de la diffusion a l'etat solide-application aux materiaux composites et a l'interdiffusion chimique entre halogenures alcalines
    [Contribution of microanalysis by x-spectrometry to the study of diffusion in the solid state-application to composite materials and to the chemical interdiffusion between alkaline halogens]
    Thesis de 3eme cycle, Bordeaux-I, 12 February 1982. Thesis no.1752.
  3081. HM Lahiff
    Rubber-toughened epoxy resins
    BE(ME), Sydney, 1986.
  3082. JL Lai
    Dynamics of homogeneous and sandwich plates in plane strain.
    Masters, PINY Brooklyn, 1966.
  3083. Jai-lue Lai
    The propagation of waves in composite elastic rods and viscoelastic rods
    PhD, Princeton, 1969. DA6914419.
  3084. T-K Lai
    Thermal stress due to disturbance of uniform heat flow by an ellipsoidal inclusion
    PhD, NWU, 1977. DA7800725.
  3085. CPZ Lai
    Fracture energy of fibre hybrid composites
    MSc, Ottawa, 1983.
  3086. C Lai
    Kinetic analysis of an anhydride cured epoxy resin in the presence of a tertiary amine catalyst
    Masters, Nebraska, 1984.
  3087. Xiaoyun Lai
    Development of novel high-temperature composites:  liquid crystalline polymers as processing aids for polyamideimide
    PhD, University of Lowell, 1992.  AAD9306891 DAIB53(11)5747
  3088. SK Lakhanpal
    A model of couple stress effect upon the transverse stiffness of a fibre-reinforced material
    PhD, Vanderbilt, May 1974. DA7422179.
  3089. S Lakmazaheri
    Nonlinear analysis of anisotropic materials by finite element method
    Masters, Southwestern Louisiana, 1983.
  3090. M Lakshminarasimhan
    Design of light weight energy absorbing structures
    Masters, Texas @ Arlington, 1984.
  3091. R Lal
    Vibrations of elastic plates of variable thickness.
    PhD, Roorkee-India, 1979.
  3092. S Lal
    <mechanical properties of E-glass reinforced nylon 6,6 composites>
    MTech, Banaras Hindu @ Varanasi, 1990.
    >>> K Lal-Chhibber, see KL Chhibber.
  3093. Batul Laleh
    An investigation into the behaviour of various sized fibre reinforced plastic beams
    PhD, CNAA, 1991. DX95351. DAIB 52(11)6064.
  3094. PW-K Lam
    Fatigue of graphite fibre composites with controlled contraction matrices
    PhD, Toronto, 1984.
  3095. Robert Chi-Chiu Lam
    Processing of continuous fibre reinforced composites: permeability and consolidation of aligned and cross-plied graphite fibre beds
    DSc, Washington Univ-MO, August 1988. DA8911134. DAIB 50(3)1041.
  3096. Kai-Yuen Lam
    Measurement of the optical properties of epoxy and their application to a fibre optic epoxy cure sensor
    PhD, University of Washington-WA, 1991. DA9203273. DAIB 52(8)4378.
  3097. J Lamalle
    Conception de structures non axisymetriques (elements de nacelle de reacteur)
    [Design of non axisymmetric structures (turbojet engine nacelle element)]
    Thesis, SNIAS France, 1985. SNIAS-852-430-119. N86-17498.
  3098. DW Lamb
    Processing and properties of polyester moulding compounds.
    PhD, Liverpool, June 1985. D67000/86. ASLIB 36-2234.
  3099. JM Lambert
    Synthesis and basic characteristics of segmented poly(arylene ether sulphone)-poly(arylate) copolymers.
    PhD, VPI&SU, February 1986. DA8620636.
  3100. Marios Aristou Lambi
    Effect of delamination on the performance of composite laminates
    PhD, WVU, 1992. DA9225315. DAIB 53(4)2024.
  3101. PJ Lamble
    On the existence of singular stresses in radially orthotropic bodies
    Masters, Clemson, 1988.
  3102. Mark Jackson Lamborn
    Deformation and delamination of inelastic laminates under tensile and torsional loading
    PhD, TA&MU, 1989. DA9015530. DAIB 51(1)281.
  3103. ND Lambropoulus
    Finite element modelling of the behaviour of composite materials
  3104. MS, RPI, 1988.
  3105. NR Lampert
    Ultrasonic nondestructive evaluation of graphite fibre epoxy laminates subjected to tensile fatigue and impact loading.
    Masters, MIT, 1979.
  3106. JD Landes
    Torsion of bonded dissimilar materials containing circular or ring-shaped cavities
    Masters, Lehigh, 1965.
  3107. H Landis
    Fibre matrix interactions in Ti/SiC composites
    Masters, GWU, July 1981.
  3108. BJ Landsberger
    Aeroelastic properties of straight and forward swept graphite/epoxy wings
    Masters, AFIT WPAFB/MIT, February 1983. AD A127 014. AFIT/CI/NR-83-11T. N83-31734
  3109. J Lane
    Dielectric studies of epoxy matrix systems
    Masters, University of Washington-WA, 1984.
  3110. Martin Stakes Lane
    The frictionless contact problem of anisotropic multilayered media
    PhD, Virginia, 1991. DA9208908. DAIB 52(12)6547.
  3111. K-W Lang
    Determination of dynamic characteristics of elastic composite structures
    PhD, NWU, 1978. DA7907903. N79-21130.
  3112. DC Lang
    Transmission loss of orthotropic damped sandwich panels.
    Masters, Massachusetts, 1982.
  3113. RW Lang
    Applicability of linear elastic fracture mechanics to fatigue in polymers and short fibre composites
    PhD, Lehigh, 1984. DA8418421. N85-18152.
  3114. Elemer Marton Lang
    Modelling the behavior of wood-based composite sheathing under hygrothermal load
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9414076  DAIB54(12)6012
  3115. LJ Langan
    The modelling and control of the pultrusion manufacturing process
    Masters, MIT, 1986.
  3116. Deborah Kessler Langan
    Numerical solution of transverse electric scattering by inhomogeneous two-dimensional composite dielectric and metallic bodies of arbitrary cross-section
    MS, Houston, 1989. MA1337620. MA28(1)147.
  3117. C Langlie
    Tragfahigkeitsprobleme ausgeshaumter GFK-Hohlprofile bei Kurzzeitbelastung
    Dissertation, TH Berlin, 1971.
  3118. JL Lantrip
    Preliminary study on the oblique machining of fibrous composites
    Masters, University of Washington-WA, 1985.
  3119. RB Lantz
    Effect of load angle on the compressive failure of fibreglass/epoxy faced honeycomb sandwich structure
    Masters, Georgia IT, 1969.
  3120. RA Larder
    The stochastic finite element simulation of the nonlinear structural response of fibrous composite materials
    DEng, California: Davis, 1975. DA7522837.
  3121. D Laroche
    Accumulation d'endommagement dans le carbone epoxyde, detecte par emission acoustique
    [Damage accumulation in carbon epoxy detected by acoustic emission]
    DIng, EMP Evry, May 1980.
  3122. Denis Laroche
    Prediction ofconstraints and residual strains from the moulding of complex composite forms
    Prediction des contraintes et deformations residuelles lors du moulage de formes complexes moulees en composite
    MScA, Ecole Polytechnique Montreal - Canada, 1991.  AADMM69638  MA31(1)422
  3123. JV Larsen
    Carbon fibre structure, surface and surface treatments.
    PhD, Maryland, 21 July 1971. DA7212735.
  3124. Michael Charles Larson
    Theoretical and experimental analysis of toughening in brittle matrix-brittle fiber ceramic composites with frictional interfaces
    PhD, Massachusetts Institute of Technology, 1992.  AAD0572215  DAIB53(6)2971
  3125. Brent Kevin Larson
    Wetting, spreading and interphase formation in a liquid composite molding environment
    PhD, Michigan State University, 1993.  AAD9418022  DAIB55(2)509
  3126. Philip H Larson Jr
    The use of piezoelectric materials in creating adaptive shell structures
    PhD, University of Delaware, 1994.  AAD9419489  DAIB55(3)1144
  3127. LOK Larsson
    Metal matrix composites for turbine blades in aero engines.
    Tekn.dr, Chalmers TH, 1981. ISBN 91-7032-040-3.
  3128. Per-Lennart Larsson
    On buckling and delamination failure of composite plates
    Tekn.dr, KTH Stockholm, 1989. DA-150280. DAIC 51(4)648.
  3129. Per H Larsson
    Design and fabrication of an experimental facility for pultrusion of thermoplastic composites
    MS, KTH Stockholm, 1991.
    >>> K Latha Devi, see KL Devi.
  3130. MG Latimer
    The effect of fibre and machine parameters on the fabric geometry and properties of an air-laid thermal resin bonded nonwoven web structure
    Masters, Clemson, 1982.
  3131. Robert Adam Latour
    In vitro simulation of in vivo dynamic micromechanical failure of structural composite biomaterials
    PhD, Pennsylvania, 1989. DA9015125. DAIB 51(1)311.
  3132. JH-S Lau
    Stress and vibration analysis of orthotropic shells of revolution
    PhD, UIUC, 1977. DA7726695.
  3133. CH Lau
    The synthesis and properties of epoxy resins of controlled crosslink density
    PhD, Brunel, May 1985. D65735/86.
  3134. Oliver Holap Lau
    Fracture behavior of composites at room and cryogenic temperature
    PhD, University of Wisconsin - Madison, 1992.  AAD9238560  DAIB54(2)1037
  3135. KN Lauraitis
    Failure modes and strength of angle-ply laminates.
    Masters, UIUC, 1971.
  3136. V Laurent
    <aluminium carbide crystal growth at SiC/Al interfaces>
    Thesis, Grenoble, 4 November 1988.
  3137. A Laveau
    Analyse dynamique non-lineaire des coques cylindriques anisotropes contenant un fluide
    [Nonlinear dynamic analysis of anisotropic cylindrical shells containing a fluid]
    Masters, Montreal, 1985.
  3138. RE Lavengood
    The effect of aspect ratio on the fatigue life of short boron fibre reinforced composites
    MS, Washington University-MO, 1968.
  3139. YS Law
    Thermal conductivity of two-phase and three-phase heterogeneous solid mixtures
    Masters, Ottawa, 1971.
  3140. GE Law
    Fracture analysis of [#25/90]s graphite epoxy composite laminates
    PhD, Drexel, June 1981. DA8118931. N82-10119.
  3141. DA Lawing
    Broadline NMR studies of water in graphite and poly(p-phenylene terephthalate) fibre epoxy composites
    PhD, NCSU Raleigh, 1983. DA8428993.
  3142. RJ Lawless
    A computer simulation of the filament winding process for the design and manufacture of composite products
    Masters, Delaware, 1985.
  3143. Wesley Eugene Lawrence
    Processing induced internal stresses in advanced thermoplastic composite laminates
    PhD, University of Washington, 1992.  AAD9312700  DAIB54(1)365.
    >>> VFSt Lawrence, see VF St.Lawrence.
  3144. Yin Le
  3145. Study of damage accumulation in notched graphite/epoxy laminates
    MS, Beijing Inst.Aero.Astro, 1984.
  3146. PX Le
    Tensile behaviour of single AS4 carbon fibres and AS4/3501-6 carbon epoxy composites
    Masters, Calgary, 1986.
  3147. Minh Duc Le
    Stresses of composite laminates with holes
    MS, CSULB, 1990. MA1340944. MA 29(1)139.
  3148. Hieu The Le
    Postbuckling analysis of delaminated composite laminates
    MS, California State University, 1994.  AADAAI1360520  MA33(4)1275
  3149. Citra Atmaja Le
    Nonlinear behavior of prismatic anisotropic beams using a general higher-order theory
    PhD, University of California, San Diego, 1995.  AADAAI9535395  DAB56(6)3306
  3150. J Leach
    Domed ends for GRP pressure vessels
    MSc, UMIST, 1983.
  3151. Crystal Sutphin Leach
    The effect of fiber reinforcement on the fatigue properties of elastomers
    PhD, Clemson University, 1994.  AADAAI9518189  DAB56(2)1038
  3152. D Leadbetter
    An investigation of factors affecting the design and performance of glass-reinforced plastic structures
    MSc, Manchester, December 1979. D77072.
  3153. Jason Leadbitter
    Structure-property relationships in reaction injection moulded polymers and polymer composites: structure-property studies of reaction injection moulded polyurethanes, polyesters, polyacrylates and novel acrylic-urethane blends and composites of these materials with particulate and continuous-strand glass reinforcement
    PhD, Bradford, 1988. DX85106. ASLIB 38(2)3317. DAIB 50(2)666.
  3154. MA Leaity
    Mechanical properties of hybrid-matrix composite laminates
    PhD, Surrey, February 1991. DX94029. DAIB 52(8)4411.
    >>> EC Leaver, see PGM Heppel.
  3155. PJ Leavesley
    An analytical model of strength loss in filament wound spherical vessels
    PhD, VPI&SU, 1983. DA8412932.
  3156. OV Lebedeva
    <glass, carbon, PABI, PPTA/epoxy composites>
    Doctorate, I Chem Phys Acad Sci Moscow, 1987.
  3157. Michel Joseph le Blanc
    A prototype fibre optic damage assessment system for an aircraft composite leading edge
    MASc, Toronto, 1990. MM-58312.  MA 30(3)801.
  3158. Gilbert Lebrun
    Study of delamination fracture of woven glass/polyester
    Etude de la rupture par delaminage de composites polyester/verre a renforts tisses
    MScA, Ecole Polytechnique Montreal - Canada, 1991.  AADMM69641  MA31(1)422
  3159. RA Leclair
    Bending of an axially loaded strand with friction and the mechanics of wire rope reinforced cylinders.
    PhD, UIUC, 1986. DA8701545.
  3160. Jean-Philippe Lecointe
    Synthese, morphologie et proprietes de polyester-urethane en solution dans le styrene: application a la mise en oeuvre de composites [Synthesis, morphology and properties of polyester urethanes in styrene solution: application to preparation of composites]
    Doctorate, INSA Lyon, 1992.  DA-C242060. DAIC 53(3)535.
  3161. E le Dantec
    Contribution a la modelisation du comportement mecanique des composites stratifies
    [Modelling the mechanical loading of layered composites]
    Thesis, Paris VI, 1983.
  3162. Warren Alan Lederman
    The damping properties of composite materials
    PhD, Wisconsin: Milwaukee, 1991. DA9126321. DAIB 52(4)2257.
  3163. TE Lednicky
    Evaluation of hole quality and bit life in graphite/epoxy composite using video scanning
    Masters, TA&MU, 1985.
  3164. CT Lee
    Damping characteristics of composite engineering structures.
    PhD, Minnesota, 1969. DA7015762.
  3165. BL Lee
    Dynamic mechanical properties of filled polymers: effect of surface treatments and environmental atmospheres
    MS, Washington University-MO, 1971.
  3166. Y-D Lee
    Thermal conductivity of reinforced plastics
    Masters, Connecticut, 1971.
  3167. SW Lee
    An assumed stress hybrid finite element for three-dimensional elastic structural analysis
    MS, MIT, May 1974.
  3168. DA Lee
    Mechanics of fibre reinforced materials
    PhD, Nottingham, 1975!.
  3169. HJ Lee
    Thermal diffusivity in layered and dispersed composites
    PhD, Purdue, 1975. DA7600554.
  3170. Y-K Lee
    Mechanical properties of randomly oriented fibres in a composite with brittle matrix
    Masters, MIT, 1975.
  3171. B-L Lee
    Study of processing and properties of graphite fibre/high temperature resin composites
    Sc.D, MIT, 1976.
  3172. TYR Lee
    Thermal diffusivity of dispersed and layered composites.
    PhD, Purdue, 1977. DA7803254. N78-22159.
  3173. L-C Lee
    Stress analysis for a unidirectional composite reinforced with a doubly periodic array of identical inclusions
    PhD, Cornell, 1978. DA7817865.
  3174. W-C Lee
    Elastic behaviour of orthotropic wood-base plates
    PhD, Auburn, 1978. DA7907818.
  3175. LC Lee
    Two-dimensional anisotropic scattering in a cylindrical medium
    Masters, Missouri-Rolla, 1980.
  3176. MC Lee
    Fatigue in graphite/epoxy bolted joints
    Masters, AFIT WPAFB/MIT, June 1980. AFIT-CI-80-14T. AD A092 362.
  3177. SJ Lee
    On-line monitoring and optimising hole quality on drilling graphite/epoxy composites
    Masters, Wisconsin: Madison, 1980.
  3178. DJ Lee
    Structural stability of unidirectional CFRP thin-walled open-section columns
    PhD, CNAA: Plymouth, August 1981. D40825/82.
  3179. HH Lee
    <cracking from a circular hole in an orthotropic plate>
    MS, KAIST, 1981.
  3180. HL Lee
    Optimisation of a resin cure sensor
    MS, MIT, 1982.
  3181. IT Lee
    Calendaring effects in mica reinforced polypropylene
    Masters, Toronto, 1982.
  3182. S Lee
    Thermal study of epoxy resin cured with homologous aliphatic diamine
    Masters, Akron, 1982.
  3183. SJ Lee
    Compressive flow of viscoelastic materials
    PhD, Delaware, 1982.
  3184. CE Lee
    Numerical determination of the effects of boundary condition on the instability of composite panels with cutouts
    Masters, AFIT @WPAFB, December 1983. AFIT/GA/AA/83D-4. AD A136 772. N84-19931.
  3185. CH Lee
    Molecular characterisation of a Kevlar 49 composite-moisture effects on crosslinking
    Masters, Nebraska, 1983.
  3186. WI Lee
    Microwave curing of composites
    PhD, Michigan, 1983. DA8402312. N84-22708.
  3187. CC Lee
    Numerical models for compression mould filling.
    PhD, UIUC, 1984.
  3188. K Lee
    A numerical study of an orthotropic solid under dynamic loads
    PhD, SUNY @ Stony Brook, 1984. DA8422579.
  3189. JS Lee
    SAXS study of failure mechanisms in Kevlar fibre reinforced epoxy composites
    MS, Tennessee @ Knoxville, 1984.
  3190. M Lee
    Laser light scattering of amorphous polymer in the glass transition region
    Masters, CWRU, 1984.
  3191. S-Y Lee
    Wave propagation in periodic composite structures
    PhD, SUNY @ Buffalo, 1984. DA8426057. N85-18370.
  3192. B-T Lee
    Measurements of damping for non-destructively assessing integrity of fibre reinforced composites
    PhD, Florida, May 1985. DA8523856. N86-22641.
  3193. DG Lee
    Manufacturing and testing of composite material tool structures
    PhD, MIT, 1985.
  3194. H Lee
    Radiation heat transfer in anisotropically scattering media
    PhD, UIUC, 1985. DA8521814.
  3195. JR Lee
    Etude et modelisation de l'endommagement des stratifies carbone/ epoxy (#45)2s et (0/90)2s
    [Study and model for damage in #45 and 0/90 carbon/epoxy laminates]
    DIng, UT Compiegne, November 1985.
  3196. KY Lee
    The correlation of processing variables for optimising the pultrusion process
    MS, NTHU Taiwan, June 1985.
  3197. SH-H Lee
    Investigation of low-amplitude shear wave velocity in anisotropic materials
    PhD, Texas @ Austin, 1985. DA8609532.
  3198. BI Lee
    Chemically derived ceramic composites.
    PhD, Florida, 1986. DA8618649.
  3199. CW Lee
    Experimental facilities for fibre life testing.
    MS, NPS Monterey, March 1986.
  3200. DS Lee
    Rheology-curing-processing relationships in thermosetting polyester resins
    PhD, PINY, 1986. DA8604704.
  3201. H Lee
    Servicability behaviour of concrete beams post-tensioned with glass fibre reinforced plastic tendons
    Masters, NCSU, 1986.
  3202. WS Lee
    Synthesis of [fibrous] polyesters containing free hydroxyl groups
    PhD, Leeds, July 1986. D86601.
  3203. C-K Lee
    Piezoelectric laminates for torsional and bending modal control: theory and experiment
    PhD, Cornell, 1987.
  3204. CS Lee
    Thermal cycling of alumina/magnesium alloy composite
    Masters, New Mexico Inst Mining & Tech, 1987.
  3205. D Lee
    Ultrasonic nondestructive characterisation of silicon carbide reinforced aluminium metal matrix composites
    Masters, Houston, 1987.
  3206. H-J Lee
    Determination of the complex modulus of a solid propellant and random vibration analysis of layered viscoelastic cylinders with finite element method
    PhD, VPI&SU, 1987. DA8712386.
  3207. JH Lee
    Strength and failure analysis of composite laminate containing a circular hole with reinforcement
    Masters, AFIT WPAFB, 1987.
  3208. JW Lee
    Deformation analysis of local ply curvature in laminated composites
    Masters, TA&MU, 1987.
  3209. MS Lee
    Shape optimisation of a hole in symmetric laminates.
    PhD, Michigan, 1987. DA8712160.
  3210. YS Lee
    Stress analysis and investigation of void formation under external stress of power law creep material using complex variables and pseudo-stress functions
    PhD, Pittsburgh, 1987.
  3211. Chienhom Lee
    Finite element analysis on stitching techniques for composite joining and reinforcement
    MS, Michigan SU, 1988.  MA1336024.  MA 27(3)409.
  3212. CH Lee
    Modelling the chemorheology of an amine-epoxy system of the type used in advanced composites
    Masters, PI Brooklyn, 1988.
  3213. Hean-Cheal Lee
    Flash pulse method for the determination of thermal conductivities of pultrusion formed composite materials
    MS, Lowell, 1988. MA1336114. MA 27(4)515.
  3214. Jae-Won Lee
    Damage development, property degradation and life prediction in composite laminates
    PhD, NWU, 1988. DA8902656. DAIB 49(11)4991.
  3215. MH Lee
    Finite element analysis of laminated composite plates
    Masters, NPS Monterey, 1988.
  3216. Walter J Lee
    Advanced composite prepreg processing science
    PhD, Washington University-MO, February 1988. DA8820429. DAIB 49(8)3327.
  3217. Jung Ki Lee
    Stress analysis in cross-ply laminates damaged by transverse matrix cracks
    MS, Michigan SU, 1989. MA1338633. MA28(3)454.
  3218. Kyoung-Don Lee
    An orthotropic theory of viscoplasticity based on overstress for thermomechanical deformation and its application to laminated metal matrix composites
    PhD, RPI, 1989. DA9011308. DAIB 50(10)4725.
  3219. Soo-Yong Lee
    Filament winding process model
    PhD, Stanford, 1989. DA8925906. DAIB 50(7)3055.
  3220. Yvonne Siew Keng Lee
    Isocyanate cured epoxy resins: isocyanurate-oxazolidone polymers
    PhD, Brunel, 1989. DX88556. DAIB 51(1)375.
  3221. Hae-Weon Lee
    Suspension processing and pressureless sintering of silicon carbide whisker-reinforced alumina-matrix composites
    PhD, Florida, 1990. DA9106439. DAIB 51(10)4991.
  3222. Jaimin Lee
    Detonation shock dynamics of composite energetic materials
    PhD, NMIMT, 1990. DA9115700. DAIB 52(1)308.
  3223. Jongkeun Lee
    Effects of hydrostatic pressure on curing of an epoxy-amine system
    PhD, Rutgers SUNJ @ New Brunswick, 1990. DA9034921. DAIB 51(11)5530
  3224. Joosik Lee
    High-resolution interferometric measurements of residual strains in composites
    PhD, VPI&SU, 1990. DA9116634. DAIB 52(1)478.
  3225. Pek Wah Pearl Lee
    Matrix cracking behaviour of off-axis plies in glass/epoxy composite laminates
    PhD, UBC Vancouver, 1990. DA-NN59667. DAIB 52(10)5475.
  3226. Chun-Ying Lee
    A study of the interlaminar stress continuity theories for composite laminates
    PhD, Michigan SU, 1991. DA9134145. DAIB 52(6)3139.
  3227. Eung Jae Lee
    Load transfer from a multiply connected plane anisotropic structure to an edge-stringer
    PhD, NCSU @ Raleigh, 1991. DA9202563. DAIB 52(8)4426.
  3228. Jaihak Lee
    Acousto-ultrasonic evaluation of composite materials
    PhD, Pennsylvania SU, 1991. DA9214217. DAIB 52(12)6491.
  3229. Jeong Goo Lee
    Long glass fibre embedment in polycarbonate thermoplastic
    PhD, Iowa SU, 1991. DA9126212. DAIA 52(6)2116.
  3230. Kyun Lee
    Investigations of the mechanical behaviour of graphite/PEEK (APC-2) composites
    PhD, Tennessee, 1991. DA9221780. DAIB 53(3)1453.
  3231. Myung Cheon Lee
    Investigation of the diffusive and mechanical behaviour of epoxy composites upon water sorption
    PhD, Purdue, 1991. DA9201356. DAIB 52(7)3759.
  3232. Won Jae Lee
    Thermal fatigue in ceramics and ceramic matrix composites
    PhD, Michigan SU, 1991. DA9208801. DAIB 52(10)5476. In 2 volumes.
  3233. Sang Soon Lee
    Three-dimensional boundary element analysis of residual stresses in a cross-ply fiber composite model
    PhD, UCLA, 1992. DA9218170. DAIB 53(1)517.
  3234. Jaehong Lee
    Vibration, buckling and postbuckling of laminated composites with delaminations
    PhD, Virginia Polytechnic Institute and State University, 1992.  AAD9229606  DAIB53(7)3583
  3235. Shi-Wei Ricky Lee
    Investigation and modeling of penetration process for composite laminates impacted by a blunt-ended projectile
    PhD, Purdue University, 1992.  AAD9301336  DAIB53(9)4766
  3236. Bok Woo Lee
    Application of variational-asymptotical method to laminated composite plates
    PhD, Georgia Institute of Technology, 1993.  AAD9415650  DAIB54(12)6359
  3237. Chun-Sho Lee
    A process simulation model for the manufacture of composite laminates from fiber-reinforced, polyimide matrix prepreg materials
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9316822  DAIB54(2)970
  3238. Chin Hai Lee
    Vibration control by using shape memory alloy in composites and sandwich structures
    PhD, University of Florida, 1993.  AAD9431972  DAIB55(7)2866
  3239. Jin Lee
    FEM studies of interface cracks in anisotropic elastic solids
    PhD, Stanford University, 1993.  AAD9317786  DAIB54(2)1050
  3240. Kiyong Lee
    The dependence of the effective Young's modulus of glass/epoxy and glass/glue laminates on adhesion area and glue bond thickness
    MS, Michigan State University, 1993.  AAD1354888  MA32(3)1044.  AAD1356095  MA32(3)1049.
  3241. Robert Chun-Yen Lee
    Simple analysis of the Yeh-Stratton failure criterion on composite materials
    MS, California State University Long Beach, 1993.  AAD1356095  MA32(3)1049
  3242. Sangbeom Lee
    Nondestructive examination of chemical vapor infiltration of 0°/90° silicon carbide/Nicalon composites
    PhD, Georgia Institute of Technology, 1993.  AAD9415652.  AAD9416203  DAIB55(1)6696.
  3243. Shin Steven Lee
    Damage analysis and mechanical response of as-received and heat-treated Nicalon/CAS-II glass-ceramic matrix composites
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9323777  DAIB54(5)2586
  3244. Shiowjen Lee
    System reliability with application to the strength of materials
    PhD, University of South Carolina, 1993.  AAD9410019  DAIB54(11)5751
  3245. Sunpyo Lee
    Coupled finite element analysis of decomposing poroelastic polymeric composites and structures with subsequent thermal and gas diffusion
    PhD, Pennsylvania State University, 1993.  AAD9414327  DAIB54(12)6292
  3246. Taekoo Lee
    Optimization of metal-ceramic bonding to enhance mechanical properties of ceramic matrix composite
    PhD, Michigan State University, 1993.  AAD9418026  DAIB55(2)550
  3247. Ven-Gen Lee
    On the mechanics of stress analysis of fiber-reinforced composites
    PhD, Northwestern University, 1993.  AAD9327240  DAIB54(5)2586
  3248. Yun Hee Lee
    Microwave remote sensing of multi-layered anisotropic random media
    PhD, Syracuse University, 1993.  AAD9421715  DAIB55(3)1089
  3249. Jung Ki Lee
    Micromechanics of crack extension in composites
    PhD, University of California - Los Angeles, 1994.  AAD9420519  DAIB55(3)1145
  3250. So Duk Lee
    Object-oriented H-, P-version finite element analysis in applications to interlaminar stress distribution and delamination in composite laminates
    PhD, The University of Texas at Arlington, 1994.  AADAAI9509731  DAB55(12)5534
  3251. Joong-Hee Lee
    A study on the long fiber reinforced thermoplastic composite sheet forming
    PhD, University of Minnesota, 1995.  AADAAI9537880  DAB56(7)3980
  3252. Seng Guan Lee
    Impact damage resistance of laminated composites with interleaves
    PhD, Stanford University, 1995.  AADAAI9525859  DAB56(4)2155
  3253. Yong-Joon Lee
    Structure-property behavior of novel high performance thermoplastics and thermoset structural adhesives and composite matrix resins
    PhD, Virginia Polytechnic Institute and State University, 1995.  AADAAI9529867 DAB56(5)2811
  3254. AR Leewood
    Numerical studies of problems in anisotropic plasticity
    PhD, Purdue, 1985. DA8606573.
  3255. M Lefley
    The automated inspection of knitted fabrics
    PhD, CNAA: Leicester Poly & William Baker Ltd & Corah UK plc, May 1988. DX76680. ASLIB 39(2)5172.
  3256. MJ Legg
    Effect of resin flexibility on the properties of glass filament wound pipes
    PhD, Liverpool, 1980.
  3257. Christopher Alexander Leger
    Analysis of interlaminar stresses in symmetric and unsymmetric laminates under various loadings
    MS, University of Texas at Arlington, 1992.  AAD1350166  MA31(1)422
  3258. Jean-Gabriel Legoux
    Influence du type de renfort et des reactions chimiques aluminium-carbure de silicium sur les proprietes des composites a matrice metallique
    PhD, Ecole Polytechnique Montreal - Canada, 1991.  AADNN72755  DAIB53(12)6518
  3259. H Lehar
    Beitrag zur numerischen Behandlung ebener, anisotroper Schicht-verbunde mittels der methode der Finiten Elemente [Study of the homogeneous numerical analysis of anisotropic laminated composite by finite element method]
    Dissertation, Innsbruck, 1984.
  3260. MW Lehman
    An investigation of intra-ply microcrack density development in a crossply laminate
    Masters, TA&MU, December 1980.
  3261. Ming Min Lei
    Buckling of composite cylindrical shells under axial and radial loading
    PhD, Wisconsin, 1968. DA6816000.
  3262. S-C Lei
    A stochastic model for the damage growth during transverse cracking processes in composite laminates
    PhD, Drexel, 1987. DA8629415.
  3263. Moti M Leibowitz
    Studies on the use of piezoelectric actuators in composite sandwich construction
    PhD, University of Delaware, 1993.  AAD9334030  DAIB54(7)3815
  3264. S Leitzgen
    Dielektrische Prozesskontrolle bei der Verarbeitung von glasfaser-gefullten, ungesattigten Polyesterharzformmassen auf einer Spritzgiessmaschine
    [Dielectric process control for GRP manufacture with an injection moulding machine]
    Unpublished diploma thesis, IKV Aachen, 1991.
  3265. CN Lekakou
    Simulation of flow, reaction and heat transfer in reaction injection moulding
    PhD, London: ICST&M, 1987. ASLIB 37(4)8652.
  3266. CW Lemaistre
    The origin of structure in carbon fibres
    PhD, RPI, 1971. DA7210861.
  3267. A Lemascon
    Fatigue delamination of carbon-epoxy composite materials
    Thesis de 3eme cycle, UT Compiegne, 10 June 1980.
  3268. GK Lemasters
    An epidemiological study of pregnant workers in the reinforced plastics industry assessing outcomes associated with live births
    PhD, Cincinnati, 1983. DA8323222.
  3269. JD LeMay
    The influence of molecular structure on the mechanical and fracture behaviour of highly crosslinked epoxy networks
    PhD, Akron, 1985. DA8507794.
  3270. JC Lenain
    Etude de la resistance a la fissuration d'un materiau composite matrice fragile et fibres discontinues: l'amiante-ciment.
    Thesis, EMP Evry, 1976.
  3271. R Lenarduzzi
    Stress-strain testing and mass determination of textile fibres
    PhD, Tennessee, 1980. DA8104603.
  3272. F Lene
    Contribution a l'etude des materiaux composites et de leur endommagement
    [Study of composite materials and their damage]
    These d'etat, Paris: P&M Curie, June 1984. In French.
    Translation: NASA-TT-20107, November 1987. N88-10897.
  3273. D Le-Nizerhy
    Plastic behaviour of multilayer composite materials. assessment calculation by limit analysis
    DEng, Paris VI, June 1976.
  3274. RT Lentz
    Dispersion relations for fibre reinforced media
    PhD, Northwestern, 1969. DA7006491. N71-21319.
    >>> Y LePetitcorps, see Y le Petitcorps.
  3275. Rodolphe Gilles Le Riche
    Optimization of composite structures by genetic algorithms
    PhD, Virginia Polytechnic Inst. & State University, 1994.  AADAAI9514632  DAB56(1)361
  3276. Bruce David Lerner
    Use of Fourier transform infrared spectrometry to characterize composites and polymers
    PhD, University of California - Riverside, 1992.  AAD9314130  DAIB54(1)210.
    >>> J Lerthanapredakul, see D Chan
  3277. James Gerard Lertola
    High-modulus polyester laminates consolidated through chemical reactions
    PhD, Delaware, 1989. DA9019322. DAIB 51(2)930.
  3278. GA Lesieutre
    Crack growth in 4-ply unidirectional graphite/epoxy laminates under cyclic loading
    SM, MIT, 1980. TELAC-Report-80-6.
  3279. John James Lesko
    Interphase properties and their effects on the compression mechanics of polymeric composites
    PhD, Virginia Polytechnic Institute and State University, 1994.  AADAAI9524787  DAB56(3)1524
  3280. P Lespade
    Contribution a l'etude de la graphitation des carbones par micro-spectrometrie Raman. Application aux materiaux composites carbone-carbone [Contribution to the study of graphitisation of carbons by Raman
    microspectrometry-application to carbon/carbon composite materials]
    DIng(3eme cycle), Bordeaux-I, 15 October 1982. Thesis #325.
  3281. Larry Brian Lessard
    Compression failure in laminated composites containing an open hole
    PhD, Stanford, March 1989. DA8919445. DAIB 50(6)2508.
  3282. L Letch
    Polyetheretherketone: improving environmental stress craze resistance
    MPhil, Brunel, 1983. ASLIB 37(1)1716.
  3283. A Letton
    Effect of thermal history and polymer-filler interactions on the molecular relaxation processes of bisphenol-A polysulphone.
    PhD, Cincinnati, 1984. DA8420892.
  3284. Syue-Sinn Leu
    Debonding force of a single fibre from a composite body
    PhD, Alabama, 1991. DA9213851. DAIB 52(12)6622.
  3285. Christopher Kin-Ying Leung
    Micromechanical modelling of short-fibre reinforced ceramics
    PhD, MIT, 1990. DA-382057.
  3286. Q le Van
    Activation des reactions de reticulation des resines epoxydes par micro-ondes (2450 MHz): application aux composites resines epoxydes/fibres de verres et resines epoxydes/fibres de graphite
    [Activation of reticulation reactions in epoxy resins by microwaves : use for GRP and CFRP]
    DIng, INP Toulouse, 1981. In French.
  3287. TJ Lever
    A mechanistic study into the flame retardant and smoke suppressant properties of molybdenum trioxide in brominated polyester thermoset
    PhD, CNAA: Kingston & Climax Mo, 1982.
  3288. RK Leverenz
    A finite element stress analysis of a crack in a bi-material plate
    Masters, Illinois, 1970.
  3289. Andre Levesque
    Calcul par elements finis du taux de restitution d'energie lors du delaminage d'un composite stratifie
    MScA, Universite De Sherbrooke, 1994.  AADAAIMM93129  MA33(4)1326
  3290. RJ Lewak
    Measurement of thermal deformation of laminated graphite fibre reinforced epoxy resin plates by holographic interferometry.
    Masters, Manitoba, 1975.
  3291. HC Lewis
    Effect of interfibre spacing on the high temperature deformation of Al-Al3Ni composites
    Masters, MIT, 1968.
  3292. BL Lewis
    A theory for predicting wrinkling of laminated beams.
    Masters, Texas @ Austin, 1972.
  3293. PJ Lex
    Evaluation of surface treatment for glass fibres in composite materials
    Masters, Connecticut, 1988.
  3294. R Leyrer
    Epoxyigyanta-rendszerek oregedese ultraibolya feny hatasar
    [Aging of epoxy resin systems due to artificial UV light]
    Dissertation, Budapest Muszaki Egyetem, 1977. K2395.
  3295. RB Lezec
    Prediction of the diffusion rates of liquid water into graphite and fibreglass epoxy systems
    Masters, MIT, 1986.
  3296. FC Lhottelier
    Matrix-fibre stress transfer in composite materials: elastoplastic model with an interphase
    Masters, VPI&SU, 1987.
  3297. C Lhymn
    Fracture behaviour of thermoplastic poly(ethylene terephthalate) reinforced with short E-glass fibre
    MS, Delaware, 1982.
  3298. C Lhymn
    Unified approach to the breakdown of a short-fibre composite.
    PhD, Delaware, June 1984. DA8420971.
  3299. CG Li
    Fatigue of fibre reinforced plastics
    Masters, MIT, 1983.
  3300. KY Li
    A study of certain classes of constitutive equations for anisotropic solid materials
    PhD, Dublin: Trinity, 1985-86. ASLIB 36(3)5249.
  3301. W Li
    Stress analysis for transverse cracking in 90' cross-ply composite laminates
    Masters, Pittsburgh, 1986.
  3302. Qianqian Li
    Line inclusions in anisotropic elastic solids
    PhD, UIUC, 1988. DA8825125. DAIB 49(9)3964.
  3303. Q Li
    Strength and fracture behaviour of silicon carbide coated graphite fibres and characterisation of interface in carbon fibre/aluminium matrix composite
    Masters, MIT, 1988.
  3304. Zhuang Li
    Micromechanical stresses in monolithic ceramics and ceramic composite materials
    PhD, Univ.Washington-WA, 1988. DA8911637. DAIB 50(3)1075.
  3305. Ming-Sang Li
    Higher order laminated composite plate analysis by hybrid finite element method
    PhD, MIT, 1989. DA-381754.
  3306. Wulin Li
    Fatigue strength of prestressed composite beams
    PhD, Maryland, 1989. DA9012490. DAIB 51(4)1965.
  3307. Wei Li
    On the structural mechanics of 3-D braided preforms for composites
    PhD, NCSU Raleigh, 1990. DA9033519. DAIB 51(7)3546.
  3308. Yuejun Li
    Micro and macrofailure and acoustic emission behaviours of composite bevel triggers
    PhD, Michigan TU, 1991. DA9220744. DAIB 53(2)1017.
  3309. Hong Li
    Fracture of aluminium phoshate/alumina matrix silicon carbide fibre reinforced laminated composites
    PhD, Nevada: Reno, 1992. DA9220354. DAIB 53(3)1558.
  3310. Jian Li
    Interlaminar fracture analysis for laminated composites under combined loading
    PhD, Georgia Institute of Technology, 1992.  AAD9315889  DAIB54(1)346
  3311. Lin Li
    Development of electrically/thermally conducting polymer-matrix composites
    PhD, State University of New York - Buffalo, 1993.  AAD9404833  DAIB54(9)4868
  3312. Min-Chung Li
    Thermoplastic composite consolidation
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9414079  DAIB54(12)6406
  3313. Shuh-Huei Li
    Fracture mechanics and micromechanisms in fiber-reinforced composites
    PhD, Northwestern University, 1993.  AAD9327242  DAIB54(5)2586
  3314. Yi-Chieh Li
    Fiber reinforced partially-stabilized zirconia composites
    MS, University of Massachusetts - Lowell, 1993.  AAD1354382  MA32(2)663
  3315. Zongfu Li
    Experimental micromechanical studies of interfacial load transfer and fiber interactions in composite materials
    PhD, Cornell University, 1994.  AAD9422838  DAIB55(4)1648
  3316. Chengyu Li
    Mechanical behavior of cementitious composites reinforced with high volume content of fibers
    PhD, Arizona State University, 1995.  AADAAI9530219  DAB56(4)2193
  3317. Wei-Li
    Bonding diisocyanates and elastomeric interphases to surface-functionalized carbon fibers:  effects of surface treatments on composites
    MS, Mississippi State University, 1995.  AADAAI1374521  MA33(6)1913
  3318. Xiaoyu Li
    Investigation of theories for laminated composite plates
    PhD, Michigan State University, 1995.  AADAAI9537240  DAB56(7)3841.
    >>> JX Li, see Li Jian-Xin
  3319. Chien-Chain Lia
    Development of time-dependent orthotropic constitutive law of a thermoplastic composite material
    PhD, Southern Illinois University, 1992.  AAD9312070  DAIB53(12)6441
  3320. Bin Lian
    Development and evaluation of 3-D optical sectioning for the investigation of fiber orientation distributions in injection-molded, fiber reinforced thermoplastics
    MS, Michigan State University, 1994.  AADAAI374984  MA33(6)1956.
  3321. C-S Liang
    Nonlinear composite triangular shell element
    PhD, SCalifornia, 1985.
  3322. WC Liang
    Use of an injection moulding machine nozzle as an ultrahigh speed capillary rheometer for filled and reinforced polymers
    Masters, Lowell, 1988.
  3323. Jeng-Li Liang
    Electropolymerized polymers for graphite fiber composites and electronic applications
    PhD, University of Connecticut, 1991.  AAD9227578  DAIB53(5)2339
  3324. Xiaozhen Liang
    Fiber angle manufacturing tolerance design for a laminate lay-up process
    MASc, University of Waterloo, 1992.  AADMM72411  MA31(2)910
  3325. Lei Carol Liang
    Mechanics of fiber debonding and pushout in brittle-matrix composites
    PhD, Harvard University, 1994. AADAAI9514801 DAB56(1)333
  3326. E Liang-Uin
    Wave propagation in periodic particulate composite.
    Masters, Colorado, 1981.
  3327. K-L Liao
    Numerical analysis of shortfibre/thermoplastic composite processing
    Masters, Lowell, 1986. MA1327770.
  3328. Y-T Liao
    Spectroscopic and mechanical studies of glass fibre reinforced composites
    PhD, CWRU, 1986. DA8627866.
  3329. David Liao
    Elastic behaviour of 3-D braided composites under compressive load
    PhD, Drexel, 1990. DA9030013. DAIB 51(6)3089.
  3330. Wei-Chong Liao
    Analysis of thick section composite laminates
    PhD, Purdue, 1991. DA9132469. DAIB 52(6)3139.
  3331. DG Liaw
    Elastic-plastic dynamic buckling of laminated thin-shell finite elements
    PhD, Purdue, 1990.
  3332. Der-Guang Leslie Liaw
    Reliability study of uncertain structures using stochastic finite elements
    PhD, Purdue, 1990. DA9116422. DAIB 52(1)365.
  3333. KM Liechti
    Application of optical interferometry to time dependent unbonding
    PhD, California IT, 1980. DA8020424.
  3334. Yeong Kang Lieu
    Fracture mechanisms and toughness of fibrous composites
    PhD, Auburn, 1988. DA8918806. DAIB 50(5)2104.
    >>> CK Liew, see AM Ahmad Mustapha.
  3335. Shyh-Shiuh Lih
    Response of composite laminates to dynamic surface loads
    PhD, University of California - Los Angeles, 1992.  AAD9310963  DAIB53(12)6508
  3336. H Lilholt
    Work hardening and fibre reinforcement
    Thesis, Cambridge, 1968.
  3337. Brian Peter Lilly
    Investigation of flexible inextensible composite membrane reflector
    PhD, UIUC, 1989. DA8924886. DAIB 50(7)3028.
  3338. CS Lim
    Stress concentrations in GRP spherical pressure vessels at cylindrical branch connections
    MSc, Manchester, October 1982.
  3339. JT Lim
    Effect of matrix shrinkage on the impact toughness of the pultruded aligned continuous fibre composites
    PhD, Toronto-Canada, 1983.
  3340. JW Lim
    The optimal design of composite drive shafts.
    Masters, RPI, July 1984.
  3341. BS Lim
    Buckling behaviour of asymmetric edge stiffened plates.
    PhD, Strathclyde, April 1985. D68840/86.
  3342. T Lim
    The effective stiffness of the random fibre composite
    MS, SUNY Buffalo, 1986.
  3343. JC Lim
    Composite failure criterion:probabilistic formulation and geometric interpretation
    Masters, NPS Monterey, 1988.
  3344. SG Lim
    Transverse failure in cross-ply laminated composites
    PhD, KAIST, May 1988.
  3345. Taewon Lim
    Fabrication and mechanical behaviour of aluminium matrix composite materials
    PhD, SUNY Buffalo, 1991. DA9121046. DAIB 52(5)2742.
    >>> JC Lim, see Jin-Chein Lin.
  3346. JM Lin
    Transverse properties of unidirectional aluminium matrix fibrous composites
    DSc, Washington University-MO, 1969.
  3347. Fu Tien Lin
    The finite element analysis of laminated composites.
    PhD, VPI&SU, December 1971. DA7221414.
  3348. C-C Lin
    Properties of ferrocement and fibreglass composite beams.
    Masters, Miami, 1972.
  3349. C-C Lin
    Free transverse vibrations of rectangular laminated plates.
    PhD, Georgia IT, 1973. DA7329014.
  3350. JS Lin
    Torsional analysis of a composite material containing a cavity
    PhD, Clemson, 1973. DA7331840.
  3351. HT Lin
    Failure processes in glass reinforced plastic composites.
    Masters, Auburn, 1973.
  3352. K-Y Lin
    Stress intensity of a crack at an interface between two materials
    Masters, MIT, 1973.
  3353. KY Lin
    Fracture of filamentary composite materials
    PhD, MIT, January 1976.
  3354. CJ Lin
    Dynamic responses of a multilayered rectangular plate on viscoelastic foundations due to moving loads
    PhD, West Virginia, 1979. DA8012930.
  3355. YH Lin
    Computer simulation of composite laminate with thermal gradient
    Masters, SDSMT, 1985.
  3356. C-H Lin
    Composite damping in tension members.
    PhD, Minnesota, 1986. DA8700584.
  3357. KFJ Lin
    Processing-morphology-property-durability relationships in neat and reinforced epoxy resins
    PhD, PINY, 1986. DA8604706.
  3358. T-HJ Lin
    Some properties of fibre-reinforced polyester-based composites, made with coir, jute and sisal fibres
    PhD, University of Washington-WA, 1986. DA8613182.
  3359. YG Lin
  3360. Formation et caracterisation d'un resine epoxyde- effet renforcant d'une interphase elastomere entre un charge et ce reseau [Formation and characterisation of an epoxy resin-toughening effect of an elastomeric interphase between the filler and this network]
    DEtat, INSA/Lyon I, 1986.
  3361. S-S Lin
    Frequency dependent heat generation during vibrothermograph testing of composite materials
    PhD, VPI&SU, 1987. DA8802727.
  3362. Y Lin
    A mathematical theory of elastic orthotropic plates in plane strain and axisymmetric deformations
    PhD, UBC Vancouver, 1987.
  3363. F Lin
    Oxidation behaviour of silicon carbide whisker reinforced alumina
    Masters, Brown, 1988.
  3364. Jin-Chein Lin
    Analysis of dynamic properties and modelling for a composite laminate robotic arm
    Masters/PhD, SDSMT, 1988. DA0379183.
  3365. Qun Lin
    Effect of shear deformation on the performance of high-speed flexible composite-material robotic manipulators
    MS, Nevada-Reno, 1989. MA1336850. MA27(4)527.
  3366. Weh-Huei Lin
    Fracture of sandwiched composites
    PhD, Iowa SU, 1989. DA9003548. DAIB 50(9)4184.
  3367. Bob Shen-Jei Lin
    The effects of damage on the dynamic properties of advanced composite laminates
    MS, Lowell, 1990. MA1339010. MA 28(3)454.
  3368. Shiueyao Lin
    Corrosion protection of metal matrix composites
    PhD, Southern California, 1990. DA-568774. DAIB 51(7)3526.
  3369. David C Lin
    Characterization of thermoplastic J1 polymer and its graphite fibre AS4/J1 matrix composites
    PhD, UIUC, 1991. DA9210896. DAIB 53(1)501.
  3370. Ching-Chang Charles Lin
    Large deflection analysis of cord composite plates
    PhD, UIUC, 1992. DA9215850. DAIB 53(1)383.
  3371. Min Lin
    Continuous processing of polymers and composites with microwave radiation
    MS, Michigan State University, 1993.  AAD1356351  MA32(4)1202
  3372. Shyh-Chyang Lin
    The equivalent inclusion method in elasticity and composite materials
    PhD, Northwestern University, 1993.  AAD9327245  DAIB54(5)2693
  3373. Wendy Wen-Ling Lin
    Induction heating model for high frequency induction joining and repair of complex-shape graphite fiber/polymer matrix composites
    PhD, Stanford Unversity, 1993.  AAD9317789 DAIB54(2)954
  3374. Cheng-Hsiung Lin
    A new digital isopachic contouring technique for stress analyzing composite materials
    PhD, University of Wisconsin - Madison, 1994.  AAD9417205  DAIB55(3)1145
  3375. Chun-Jia Lin
    Silicon carbide fiber reinforced silicon carbide matrix composites
    MS, University of Massachusetts - Lowell, 1994.  AAD1356053  MA32(4)1202
  3376. Gwun-Jin Lin
    Adaptive remeshing methods for finite element simulation of composite material processing
    PhD, University of Michigan, 1994.  AAD9423247  DAIB55(4)1628
  3377. Qinghuang Lin
    High performance polymeric materials through liquid crystallinity: in situ formed polymer composites and novel liquid crystalline epoxy thermosets
    PhD, University of Michigan, 1994.  AADAAI9513416  DAB56(1)458
  3378. Shun-Tien Lin
    Quantitative thermoelastic stress analysis of orthotropic composite structures
    PhD, University of Wisconsin, 1994.  AADAAI9503898  DAB55(11)4930.
  3379. Douglas W Lindstrom
    Series solution for a cylindrical composite shell subject to axisymmetric loadings
    PhD, Ottawa, 1990. DA-NN60559. DAIB 52(11)6041.
  3380. FW Linek
    Controlled release from a fragmenting encapsulation device
  3381. DSc, Washington University-MO, 1982.
  3382. GO Linero
    Suitability of tropical starches as fillers and reinforcement for thermoplastics and polyester resins
    PhD, Brunel, 1979.
  3383. SC Ling
    The effect of temperature and crosslinkings on the flow behaviour of phenolic epoxy resins
    Masters, California: Davis, 1977.
  3384. Matthew K Ling
    Structure and design optimisation of composites for noise suppression in vehicles
    PhD, Council for National Academic Awards, 1992.  AADDX97538  DAIB53(8)4239
  3385. R Lingenfelter
    Mechanical testing of composite plastics
    Masters, Akron, 1969.
  3386. CL Lingg
    Characterisation of delamination in advanced composite materials under mode III loading conditions
    Masters, AFIT @ WPAFB, 1988.
  3387. JA Link
    Experimental stress distribution associated with an array of elastic inclusions in an elastic matrix
    Masters, S.Florida, 1967.
  3388. RJ Linnander
    Laboratory development and tensile testing of graphite /glass/epoxy hybrid composite materials
    Masters, NPS Monterey, June 1974. AD 783 860. N75-10190.
  3389. PE Linnemann
    Vibration and buckling characteristics of composite cylindrical panels incorporating the effects of a higher order shear theory
    Masters, AFIT @ WPAFB, 1988.
  3390. DR Linsenmann
    Stability of plates of composite material.
    MMAE, Delaware, June 1974.
  3391. WG Lionetta
    Sources of innovation within the pultrusion industry.
    Masters, MIT, June 1977.
  3392. W-J Liou
    Stress analysis of impacted laminated composite plates with a hybrid stress finite element method
    PhD, Florida, 1986. DA8704189.
  3393. YS Lipatov
    An investigation of structure formation in concentrated solutions of polymers and in filled polymers
    Doctorate, LY Karpov Sci.Rsch.Inst.Phys.Chem, 1963.
  3394. Pete Lipetzky
    Experimental and numerical investigations of deformation and failure in ceramic-matrix composites
    PhD, Brown University, 1992.  AAD9308844  DAIB53(11)5923
  3395. SM Lipka
    A fundamental study of the kinetic behaviour of ensembles of carbon-based [Gr/Ep] microelectrodes
    PhD, Virginia, January 1985. DA8526868.
  3396. J-L Lirn
    <SCS2 CVD SiC fibre/titanium matrix composites>
    MS, Delaware, 1989.
  3397. Clifford Jesse Lissenden
    Inelastic deformation of metal matrix composites
    PhD, University of Virginia, 1993.  AAD9327902  DAIB54(5)2587
  3398. Frederick Joseph Lisy
    Effect of orientation on properties of reinforced polypropylene and evaluation of materials with scanning acoustic microscopy
    PhD, Case Western Reserve University, 1993.  AAD9416203  DAIB55(1)6686
  3399. AM Litman
    The effect of various chrysotile asbestos fiber parameter and polymer molecular weight on the mechanical and thermal properties of rigid poly(vinyl chloride)
    Masters, Lowell, 1973.
  3400. MM Little
    A viscoplastic analysis of influences of time and loading rate on cracked structures
    PhD, RPI, 26 April 1982. DA8223328.
  3401. JY Liu
    Dynamic response of rectangular, isotropic and orthotropic plates under varying constraining conditions
    PhD, VPI&SU, 1967. DA6707387.
  3402. C-H Liu
    Thermal buckling analysis of orthotropic plates
    Masters, Cincinnati, 1969.
  3403. C-T Liu
    Fatigue damage analysis and life prediction of composite laminate
    PhD, VPI&SU, 1975. DA7523705.
  3404. A Liu
    Linear elastic and elasto-plastic stress analysis for adhesive lap joints
    PhD, UIUC, 1976.
  3405. S Liu
    Effects of molecular degradation on molecular structure of a thermoset resin and Kevlar 49 composite properties
    Masters, Nebraska, 1982.
  3406. DH Liu
    Stress analysis of a pin-loaded orthotropic plate using orthotropic photoelasticity
    PhD, VPI&SU, 1984. DA8415962. N85-11366.
  3407. PK Liu
    Shear stresses in curved composite beams
    Masters, CSULB, 1984.
  3408. C-F Liu
    Geometrically nonlinear analysis of composite laminates using a refined shear deformation shell theory
    PhD, VPI&SU, December 1985. DA8605449.
  3409. S Liu
    Optimum design of composite structures with dynamic and aeroelastic constraints
    Thesis, Nanjing Aero.Inst, November 1985.
  3410. RYL Liu
    Vibration and aeroelastic tailoring of advanced composite platelike lifting surfaces
    PhD, Purdue, 1987. DA8814556.
  3411. ZG Liu
    Comportement et modelisation des materiaux composites carbone/epoxyde en cisaillement a grande vitesse [Loading and modelling carbon/epoxy composites in high speed shear]
    Doctorate, Nantes, February 1987.
  3412. Chien Hsien Liu
    The elastic-plastic behaviour of composite materials
    PhD, Yale, 1988. DA9009410. DAIB 50(11)5276.
  3413. SJ Liu
    Recycled plastics as fillers in polymer cement concrete composites
    Masters, NJIT, 1988.
  3414. SP Liu
    Finite element approach to the dynamic analysis of composite helicopter blades
    Masters, RPI, 1988.
  3415. Wei-Cheun Liu
    Bending and vibration of variable thickness orthotropic plates
    PhD, Arizona SU, 1988. DA8825693. DAIB 49(9)3965.
  3416. Ginger Lee Liu
    Debonding of model fibre composites
    PhD, Akron, 1990. DA9020137. DAIB 51(3)1296.
  3417. Daw-Shuh Liu
    The effects of superimposed pressure on the deformation and fracture of metal-matrix composites
    PhD, CWRU, 1991. DA9137067. DAIB 52(7)3843.
  3418. Jenq Liu
    Reinforcement in ceramic matrix composites
    PhD, Missouri: Rolla, 1991. DA9216448. DAIB 53(1)502.
  3419. Bangyan Liu
    Fatigue and damage tolerance analysis of composite laminates: stiffness loss, damage modelling, and life prediction
    MEng, McGill University, 1992.  AADMM74548  MA31(3)1355
  3420. Hsien-Kuang Liu
    Sol-gel processing of multi-directionally reinforced ceramic matrix composites
    PhD, University of Delaware, 1992.  AAD9319087  DAIB54(5)2712
  3421. Jianhui Liu
    A three-dimensional model for the residual stresses in a unidirectional composite plate
    PhD, University of Utah, 1992.  AAD9236254  DAIB53(7)3583
  3422. Sheng Liu
    Damage mechanics of cross-ply laminates resulting from transverse concentrated loads
    PhD, Stanford University, 1992.  AAD9302244  DAIB53(9)4907
  3423. Hsuan Joseph Liu
    Linear and geometrically nonlinear piecewise hierarchical P-version axisymmetric and three dimensional curved shell elements for laminated composites
    PhD, University of Kansas, 1993.  AAD9405760  DAIB54(9)4712
  3424. Jiayan Liu
    Brazing of carbon-carbon composites: filler metals and techniques for brazing carbon carbon composite to metals
    PhD, Auburn University, 1993.  AAD9411425  DAIB54(11)5886
  3425. Katherine Kairong Liu
    Optimizing the flexural properties of structural sandwich panels
    MS, Mississippi State University, 1993.  AAD1355954  MA32(3)1021
  3426. You-Min Liu
    Monitoring the dynamic properties of polymers and composites with a localized micro-vibration methodology
    PhD, Auburn University, 1993.  AAD9316256  DAIB54(2)1038
  3427. De-Sheng Liu
    Fatigue behavior of fiber-reinforced elastomer matrix composites
    PhD, the Pennsylvania State University, 1994.  AADAAI9518803  DAB56(2)B909
  3428. Siulie Liu
    Microcracking of cross-ply composites under static and fatigue loads
    PhD, University of Utah, 1994.  AAD9413416  DAIB54(11)5886
  3429. Kuo-Shih Liu
    A mathematical model for an in situ consolidation of thermoplastic composites
    PhD, Stanford University, 1995.  AADAAI9535623  DAB56(6)3306
  3430. Eliezer Livne
    Integrated multidisciplinary optimisation of actively controlled fibre composite wings
    PhD, UCLA, 1990. DA9105834. DAIB 51(10)4931.
  3431. Martin James Lizak
    Applications of nuclear magnetic resonance to nondestructive evaluation of advanced materials
    PhD, Washington University - MO, 1991. DA9134384. DAIB 52(6)3123.
  3432. SG Llorente
    The residual strength of graphite epoxy sandwich laminates due to impact damage and environmental conditioning
    Masters, MIT, 1986.
  3433. BA Lloyd
    Fracture behaviour in nylon 6 fibres
    PhD, Utah, June 1972. NASA-CR-127777. N72-29587.
  3434. KH Lo
    Bending of laminated beams
    PhD, Cornell, 1975. DA7608146.
  3435. JM Lo
    The characterisation of the interface in metal-matrix graphite fibre composites
    Masters, Texas @ Austin, 1981.
  3436. SY Lo
    Hygrothermal expansion of Kevlar 49/epoxy and S2/glass epoxy
    MS, Washington University-MO, 1982.
  3437. Chengying Lo
    Dynamic delamination in composite plates
    PhD, State University of New York at Stony Brook, 1994. AADAAI9521620 DAB56(3)1666
  3438. PJJ Loasmaa
    Aerodynamic size classification of glass fibres
    PhD, Cincinnati, 1982. DA8215524.
  3439. GAP Lobo
    A study of factors affecting component design and manufacturing in glass reinforced plastics
    MSc, Salford, 1975!.
  3440. J Lockwood
    Heat transfer through composite cylinders subjected to a circumferentially varying heat flux
    Masters, New Mexico, 1972.
  3441. RP Lockwood
    Viscoelastic behaviour of polyetheretherketone (PEEK) composite
    Masters, AFIT WPAFB, 1987.
  3442. JF Loeber
    Isolated forces in dissimilar materials with cracks.
    Masters, Lehigh, 1965.
  3443. CC Loechelt
    Advanced multiphase epoxy matrices for high performance composites
    MS, University of Washington-WA, 1989.
  3444. DL Logan
    Asymptotically derived cylindrical shell theories with application to anisotropic composite materials
    PhD, Illinois @ Chicago Circle, 1977. DA7732749.
  3445. SS Lohia
    Preparation and properties of textile laminates
    MSc, Leeds, 1967!.
  3446. David Loken
    Effect of fibre straightness on fatigue of aligned continuous CFRP composites
    MASc, Toronto, 1990. MM-58493. MA 30(3)857.
  3447. CP Loller
    An investigation into the electromagnetic properties of large scale carbon fibre composite structures
    PhD, CNAA: Lancashire Poly, 1987. ASLIB 37(4)7170.
  3448. R Lomax
    The continuous measurement of the cross sections of fibres, yarns and slivers
    PhD, Leeds, 1930.
  3449. AB Lomax
    Stress distribution during the creep of composites.
    PhD, CNAA: Lanchester, 1971. D3924/73.
  3450. PW Lombard
    Filament winding: a look at the state-of-the-art
    Masters, Boston, 1973.
  3451. TA Long
    Sol-gel routes for surface structures on carbon fibres- exploratory experiments with silica
    Masters, Georgia IT, 1987.
  3452. AC Loos
    Curing of graphite/epoxy composites
    PhD, Michigan, 1982. DA8304535.
  3453. Roberto A Lopex-Anido
    Analysis and design of orthotropic plates stiffened by laminated beams for bridge superstructures
    PhD, West Virginia University, 1995.  AADAAI9543866  DAB56(8)4477
  3454. PR Lopez
    Characterisation and processing of polyimide matrix composites
    Masters, University of Washington-WA, 1985.
  3455. LC Lopez
    Crystallization behaviour of poly(p-phenylene sulphide): kinetics and morphology
    PhD, VPI&SU, 1987. DA8804411.
  3456. AR de A Lopez: see AR De-Arellano-Lopez
  3457. DR Lorch
    On a refined theory for laminated composite plates.
    Masters, UCLA, 1972.
  3458. RM Lord
    On tensile and fracture properties of carbon-fibre epoxy composites with partial interlaminar bonding
    BE, Sydney, November 1980.
  3459. D Lord
    The determination of the elastic constants of fibre reinforced composites by an ultrasonic method
    PhD, Leeds, October 1988. D89994.
  3460. KD Lore
    The corrosion behaviour of silicon carbide reinforced aluminium metal matrix composites
    Masters, Clemson, 1981.
  3461. SA Lorenz
    An investigation of lightning damage to non-metallic composite aircraft materials and associated protective systems.
    DEngr, Kansas, 1977. DA7729190.
  3462. L Lorenzo
    Fatigue & acoustic emission behaviour of unidirectional composites
    DSc, Washington University-MO, May 1985. DA8524763. N86-22643.
  3463. MH Losch
    Bestimmung der mechanischen Konstanten fur einen zwei-dimensionalen nichtlinearen anisotropen elastichen stoff am Beispiel beschichtete Gewebe
    Dissertation, Stuttgart, 1971.
  3464. Marie-Louise Albertina Lossie
    Production-oriented design of filament wound composites
    PhD, KUL Leuven, 1990. DA150004. DAIC 51(4)653.
  3465. Nancy Stoneking Losure
    Viscous fingering flows in reactive resin systems (resin transfer moulding)
    PhD, Michigan State University, 1994.  AADAAI9512096 DAB55(12)5461
  3466. RS Lott
    Moisture and temperature effects on curvature of anti-symmetric cross-ply graphite/epoxy laminates
    Masters, TA&MU, 1980.
  3467. RE Lotter
    A comparitive finite element method for evaluation of fracture parameters
    Masters, Delaware, 1988.
  3468. AYC Lou
    Viscoelastic characterisation of a nonlinear fibrous composite material
    PhD, Purdue, 1969. DA7003931.
  3469. J Loughlan
    Mode interaction in lipped channel columns under concentric or eccentric loading
    PhD, Strathclyde, December 1979.
  3470. PT Loughlin
    Stiffness and strength predictions for short fibre composites with planar fibre orientation distribution.
    MSc, Illinois, 1979.
  3471. Boon Yew Low
    Micromechanical characterization of composites containing an engineered elastomer interphase chemically bonding the fibres to the matrix
    MS, Mississippi State University, 1994.  AADAAI1360785  MA33(5)1547
  3472. D Lowe
    The wear of polymeric pipes and linings in hydraulic slurry transportation
    PhD, CNAA, 1989. DX86967.
  3473. Julian Robert Lowe
    Void formation in resin transfer moulding
    PhD, University of Nottingham, 1994.  AADAAIC404201 DAB56(2)540
  3474. RD Lowrey
    Anisotropic layered shells of revolution with temperature effects
    Masters, Washington University-MO, 1970.
  3475. SR Lowy
    Fabrication of short glass fibre reinforced-nylon 66 moulding compound by continuous interfacial polymerisation.
    MS, Washington University-MO, 1970.
  3476. K-H Lu
    Fracture and fatigue properties of a three-dimensional composite material
    PhD, Kansas, 1973. DA7412594.
  3477. C Lu
    Static deflection and harmonic vibration tests of variable thickness sandwich beams
    Masters, Syracuse, 1984.
  3478. Shih-Yuan Lu
  3479. On the effective transport properties of composite materials
    PhD, Wisconsin: Madison, 1988. DA8903298. DAIB 50(2)711.
  3480. Xianqiang Lu
    An interlayer shear slip theory for composite laminates with nonrigid bonding
    PhD, Michigan SU, 1991. DA9216328. DAIB 53(1)383.
  3481. Hung-Yi Lu
    Damage progession in laminates under in-plane and edge moment loads
    MS, University of Texas at Arlington, 1992.  AAD1351749  MA31(3)1281
  3482. Hung-Yu Lu
    Nonlinear vibrations of thick composite plates:  higher-order shear deformation plate theory
    PhD, Kansas State University, 1992. AAD9310835  DAIB53(12)6508
  3483. Zhongxian Lu
    Experimental investigation of the applications of photostress method and fabric flexible composite on the structural safety
    MS, University of Nevada - Reno, 1993.  AAD1354966  MS32(2)700
  3484. Chin-Chin Lu
    Fabrication of a silicon carbide fiber-reinforced ceramic composite by the polymer pyrolysis method
    PhD, University of Delaware, 1994.  AADAAI9516331  DAB56(1)459
  3485. Tian Jian Lu
    Thermomechanical problems of ceramic matrix composites
    PhD, Harvard University, 1995.  AADAAI9538974  DAB56(7)3842.
  3486. RE Luby
    Analysis of combustion of a [graphite fibre] composite plate
    Masters, NPS Monterey, June 1981. AD A104 852. N82-12175.
  3487. AM Luc
    Thermal transfer in directional reinforced composites
    DIng, Ecole Centrale des Arts et Manufactures du Chatenay-Malabry, in preparation at January 1986.
  3488. GF Lucas
    Transverse creep properties of a boron-aluminum composite material aterial
    Masters, Wyoming, 1974.
  3489. JP Lucas
    Fracture toughness in a brittle matrix ductile fibre composite using micron size niobium fibres
    Masters, Minnesota, 1978.
  3490. RH Luckin-Smith and DJ Thomas
    Intercell buckling of honeycomb-core sandwich plates
    BSc, Bristol, June 1974. BU-174. N76-21597.
  3491. William Michael Lucking
    Analysis of edge problems in statically-loaded fibre-reinforced laminated plates by linear elastic theory
    PhD, Concordia, 1988. DA-565517. DAIB 50(5)2118.
  3492. A Ludwig
    Discontinuous fibre-reinforced composites by dry-mix moulding
    Masters, Washington University-MO, 1967.
  3493. P Luecke
    Moglichkeiten beim einsatz von prozessrechnern zur direktn numerischen steuerung von werkzeugmaschinen [Feasibility of includng process calculation on CNC-machine tools]
    Dissertation, TH Aachen, 1970.
  3494. Ellice Yeng Luh
    Mechanical behaviour of a fibre-reinforced brittle matrix composite
    PhD, California: Berkeley, 1988.  DA8916771.  DAIB 50(4)1602.
  3495. RS Lukoshevichyus
    Minimisation of the weight of cylindrical shells of composite materials under axial compression and external pressure
    Dissertation, Riga, 1977.
  3496. Kenneth Edward Lulay
    Effects of cooling on the flow strength of metal matrix composites
    PhD, University of Washington-WA, 1990. DA9104266. DAIB 51(9)4562.
    >>> FER Lumban Tobing, see FERL Tobing.
  3497. EI Lun'
    Some problems of the theory and design of shells with allowance for transverse shear
    Dissertation, L'vov, 1969.
  3498. HR Lundgren
    Buckling of multilayer plates by finite element
    PhD, Oklahoma SU, May 1967.
  3499. RH Lung
    The buckling of transversely isotropic Mindlin plates.
    Masters, RPI, 1971.
  3500. Shun-Fat Lung
    Performance of finite dynamic elements for composite materials in plane stess
    PhD, Nebraska - Lincoln, 1989. DA9022995. DAIB 51(3)1350.
  3501. JM Lunt
    Fibre degradation during the extrusion compounding of glass fibre filled nylon 6.6
    PhD, Liverpool, 1980.
  3502. S-Y Luo
    Nonlinear elastic behaviour of flexible composites
    MS, Delaware, December 1986.
  3503. Shen-Yi Luo
    Theoretical modelling and experimental characterisation of flexible composites under finite deformation
    PhD, Delaware, 1988. DA8824220. DAIB 49(8)3399.
  3504. Haian Luo
    The stress field due to an edge dislocation and some fracture problems for a three-phase composite cylinder model
    PhD, Rutgers SUNJ New Brunswick, 1989. DA9008917. DAIB 50(11)5160.
  3505. Jiayi Luo
  3506. Methods of analysis for thick-section composite structures
    PhD, Purdue, 1991. DA9215605. DAIB 53(1)408.
  3507. W-C Luong
    Diffraction of waves by cracks in composite media
    PhD, NWU, 1975. DA7529699.
  3508. K Lutterbeck
    Das verhalten von Kunststoffen unter dem Einfluss weshselnder Umgesbungsfeuchte und –temperatur
    [Behaviour of plastics exposed to various moisture and temperature environments]
    Dissertation, RWTH Aachen, 1984. DS8403.
  3509. JD Lutz
    A finite element model for transient thermal/structural analysis of large composite space structures
    Masters, TA&MU, 1986.
  3510. S Lynch
    Thermophysical properties of tooling materials employed in composite part manufacture
    MSc, Salford, 1986. ASLIB 36(2)4154.  RAE TM MAT/STR 1091, 1987.
  3511. Scott D Lyne
    Purification of phenolic wastewater on polymeric resins:  resin selection and operating conditions
    ME, 1994.  AADAA11360581  MA33(4)1284
  3512. KB Lyons
    Environmental degradation of glass reinforced plastics.
    PhD, Bath, 1983. D48461/84.
  3513. Jed Scott Lyons
    Micromechanical studies of crack growth in ceramic matrix composite
    PhD, Georgia IT, 1990. DA9031267. DAIB 51(5)2578.
  3514. ADL Lyszkowski
    A study of interactions in silica-silicone polymer systems
    PhD, CNAA: South Bank, December 1983. D50546/84.
  3515. T-C Ma
    Harmonic wave propagation in porous media and in fibre-reinforced viscoelastic media
    PhD, Michigan, 1979. DA7916760.
  3516. Muyuan Ma
    Deformation and fracture of polycarbonate and multilayer composites
    PhD, CWRU, 1988. DA8905170. DAIB 50(2)712.
  3517. Zhen-Yi Ma
    Emission of photons and electrons accompanying the fracture of polymers, composites and adhesives
    PhD, Washngton SU,1990. DA9131073. DAIB 52(5)2617.
  3518. Ruojuan Ma
    A study of the influence of uniform crystallization on the mechanical response of polymers and polymer-matrix composites
    PhD, University of Nebraska, 1994.  AADAAI9516588  DAB56(1)333
  3519. DR Maas
    An investigation of the strength translation phenomenon in Kevlar 49/epoxy composite test samples
    Masters, Delaware, 1987.
  3520. DP Maass
    The effects of compression fatigue on failure modes of graphite/epoxy laminates
    Masters, MIT, 1977.
  3521. GE Mabson
    Design of an experimental package to determine long term space environmental effects on epoxy matrix composites
    Masters, Toronto, 1979.
  3522. CG MacDonald
    Stress analysis of tapered transition joint in a glass fibre reinforced plastic cylinder
    Masters, Nova Scotia Tech.Coll, 1975.
  3523. DJ MacDonald
    Experimental evaluation of the tensor polynomial failure criterion for composite structures
    Masters, Toronto, 1979.
  3524. DJ MacFadyen
    Structural aspects of metal-matrix composites.
    Masters, MIT, 1968.
  3525. Y Macheret
    Studies in the plasticity of metals and [B/Al] composites
    PhD, Yale, 1985. DA8613596.
  3526. DW Machisko
    Experimental evaluation of adhesively bonded composite concrete-FRP slabs
    Masters, Cincinnati, 1984.
  3527. NB Mack
    The piggyback process for forming ceramic fibres and ceramic/carbon bicomponent fibres
    Masters, Clemson, 1987.
  3528. CA MacKenzie
    A finite element analysis of the natural frequencies and mode shapes of a square, fully clamped composite plate with and without a centrally located circular hole
    Masters, Toronto, 1985.
  3529. S Madarasz
    Erositett muanyagbol keszult hengeres hejak feszultsegi allapotanak vizsgalata
    [Stress state analysis of FRP cylindrical shells]
    Dissertation, Budapest Muszaki Egyetem, 1977. K2327.
  3530. E Madenci
    Local delamination buckling in layered structures
    PhD, UCLA, 1987. DA8800611.
  3531. AR Madenjian
    Effect of significant processing variables on thermoplastic matrix pultruded composites
    MS, Lowell, 1985.
  3532. MS Madhukar
    Fracture behaviour of boron/aluminium laminates at room and elevated temperatures
    PhD, Drexel, October 1985, 2 volumes. DA8603286.
  3533. H Maeda
    Flow visualisation of short fibre orientation
    Masters, Cornell, 1986.
  3534. O Maehle
    Elastic deformation of a circular laminated plate subject to hydrostatic pressure loading
    Masters, SDSMT, 1971.
  3535. A Magata
    Fracture toughness and fatigue of an alumina fibre reinforced magnesium metal matrix composite
    Masters, Delaware, 1988.
  3536. WA Magee
    The effect of densification on the strength of carbon-carbon composites
    Masters, RPI, 1981.
  3537. Allen M Magolan
    Investigation on retrofitment of an industrial robotic manipulator with a composite arm: design, analysis and fabrication
    MS, Michigan SU, 1989. MA1338637. MA 28(2)309.
  3538. GM Magomedov
    Studies of mechanical properties of reinforced polymer
    Dissertation, Moscow, 1977.
  3539. IK Magoon
    Effects of moulding variables, glass-fibre reinforcement and ageing on the fatigue behaviour of polycarbonate in aqueous and saline environments
    PhD, Missouri-Columbia, 1977. DA7731741.
  3540. D Maguire
    Experimental determination of the thermal diffusivity of continuous fibre composite material systems
    Masters, Delaware, 1986.
  3541. JD Maguire
    3-D/short fibre reinforced thermoplastics for joint replacement and bone augmentation
    Masters, Drexel IT, 1986.
  3542. L Mahadevan
    A hybrid-stress finite element approach for stress and vibration analysis in linear anisotropic elasticity
    Masters, Texas @ Austin, 1987.
  3543. Ravindranath Vithal Mahajan
    Contact and crack problems for an orthotropic half-plane stiffened by elastic films
    PhD, Lehigh, 1992. DA9213009. DAIB 53(1)518.
  3544. Anant D Mahale
    Characterization of voids formed during liquid impregnation of nonwoven multifilament glass networks as related to composite manufacture
    PhD, Princeton University, 1994.  AAD9429188  DAIB55(6)2301
  3545. Trevor James Mahar
    The measurement of low stress mechanical and surface properties of fabrics and their application to fabric handle and tailorability
    PhD, New South Wales, 1988/9. DA-567878. DA-568404. DAIB 51(2)965. DAIB 51(5)2600.
  3546. MN Maheshwari
    Determination of mechanical properties of composite materials by linear programming
    Masters, Nebraska, 1970.
  3547. A Maheshwari
    Behaviour of interface in alumina/glass composite
    Masters, NMIMT, 1988.
  3548. JM Mahishi
    An integrated three-dimensional micromechanical and macromechanical approach to fracture behaviour of fibre-reinforced composites
    PhD, Wyoming, December 1984.
  3549. W-D Mahler
    Modelluntersuchungen zur Verschleisswirkung stroemender Schmelzen von glasfaserverstaerkten Thermoplasten an Metallober-flaechen in Kunststoffverarbeitungsmaschinen
    [Model testing of wear flow fusion effect of GFRTP and metal surfaces in plastics process machinery]
    PhD, TH Darmstadt, 1975.
  3550. Rashid Mahmood
    Static and dynamic finite element stress analysis of layered composite plates and shells
    PhD, Cranfield IT, September 1989. DX88642. DAIB 51(1)389.
  3551. Brian Joseph Mahoney
    Quantifying distributed damage in composites via the thermoelastic effect
    PhD, University of Wisconsin - Madison, 1992.  AAD9231211  DAIB53(9)4796
  3552. DS Mahulikar
    Effects of environments on fatigue crack propagation behaviour of titanium metal matrix composites.
    PhD, Texas @ Austin, 1981. DA8208209.
  3553. A Maiga
    Finite element analysis of plates assuring the continuity of torsional moment
    These de 3eme cycle, UT Compiegne/ENSTA, 29 June 1978.
  3554. A Mair
    Analysis of beam bending experiments on off-axis laminated composites
    Masters, AFIT @ WPAFB, 1972.
  3555. GM Maistros
    Dielectric monitoring during the cure of epoxy resin blends
    PhD, Cranfield Institute of Technology, 1991.  AADDX96712  DAIB53(5)2482
  3556. PEP Maj
    Synthesis and characterisation of some fibre forming Thermotropic polymers
    PhD, Leeds, December 1985. D86600.
  3557. A Majeed
    Characterisation of aramid fibres by X-ray diffraction methods
    PhD, Leeds, 1979.
  3558. JN Majerus
    A statistical model for predicting the behaviour of generalized composites
    PhD, UIUC, 1975. DA7514139. N75-28138.
  3559. PS Majors
    Manufacture of composite parts with complex shapes via filament winding and pre-cure forming
    MS, RPI, 1987.
  3560. S Majumdar
    Plastic limit strength of unidirectional fibre reinforced composite
    PhD, UIUC, 1973. DA7412096.
  3561. BN Maker
    On drawbeads in sheet metal forming and instability mechanisms in composite materials
    PhD, Michigan, 1987. DA8712166.
  3562. AM Makhtar
    The compression creep behaviour of epoxy resins
    MPhil, Newcastle-upon-Tyne, 1988. ASLIB 38(2)4107.
  3563. Pamela Loise Makin
    Recrystallisation in aluminium-lithium based alloys
    PhD, Cambridge, September 1985. D58730/86.
  3564. Ralph F Malek
    Estimates of inhalation exposure to styrene in the reinforced plastic industry:  controlling factors and predictive model
    PhD, New York University, 1993.  AAD9411119  DAIB54(11)5590
  3565. Mohammad Reza Maleki
    Theoretical and experimental modelling techniques for composite tubes under impact and vibrational loading
    PhD, Surrey, January 1990. DX90129. DAIB 51(5)2508.
  3566. BU Malik
    Strength and failure analysis of composite laminates with holes at room and elevated temperatures
    Masters, AFIT, December 1984. AFIT/GAE/AA/84D-12. AD A153 263. N85-27981.
  3567. I Malik
    The robotic lay-up of thermoformable dry fibre reinforcements
    MSc, London: Imperial, 1991.
  3568. Ranjit Malik
    Deposition mechanism of coupling agents on silica and evaluation of the silica-epoxy composite using magnetic resonance techniques
    PhD, Rensselaer Polytechnic Institute, 1993.  AAD9420344  DAIB55(3)931
  3569. NI Malinin
    Investigation of strength and creep of plastics.
    Doctorate, Tech.Sci-Moscow, 1965.
  3570. SR Malkan
    Effect of fibre reinforcement geometry on single shear and fracture behaviour of three-dimensionally braided glass/epoxy composite pin
    Masters, Drexel, 1986.
    >>> S Mall, see MA Rezaizadeh.
  3571. Narendra Mallakunta
    Static and dynamic analysis of rectangular sandwich plates
    MASc, Ottawa, 1990. MM-60570. MA 30(3)866.
  3572. C Mallet
    Sur l'obtention de codepots pyrocarbon-carbure de silicium par CVD. Application a la ceramisation de composites carbone-carbone pour prostheses osseuses [On obtaining codeposit of pyrolysed carbon with silicon carbide by CVD. application to the ceramicisation of carbon-carbon composite for bone prostheses]
    These de 3eme cycle, Bordeaux-I, 7 October 1982. Thesis #1811.
  3573. L Mallett
    Microcomputer based control of composite curing.
    SM in ME, MIT, June 1985.
  3574. PK Mallick
    The strength and fracture behaviour of a reinforced brittle plastic
    PhD, Illinois IT, 1973. DA7327059.
  3575. V Mallick
    Stress analysis of metal/CFRP adhesive joints subjected to the effects of thermal stress
    PhD, Bristol, September 1989. DX89512.
  3576. D Mallik
    Reflective half-fringe photoelasticity applied to adhesive joints
    MS, Iowa SU, 1983.
  3577. GM Mallin
    The structural use of hot press moulded glass reinforced polyester
    PhD, Surrey, December 1984. D56063/85. ASLIB 39(1)2327.
  3578. I Mallouhi
    Contribution a l'etude de la polycondensation des prepolymeres epoxydes avec les anhydrides d'acide (relations synthese-structure-proprietes) [Polycondensation of epoxy prepolymer with acid anhydrides
  3579. (synthesis-structure-property relationships)]
    Dissertation, INSA/Lyon I, 1977.
  3580. S Malmi
    Dynamic analysis of sandwich beam by exact finite element method
    Diploma, Tampere UT-Finland, 1987. In Finnish.
  3581. J Malmo
    The flexural strength and rigidity of fibre reinforced polyester
    MSc, Bradford, 1970!.
  3582. JC Malzahn
    Microstructure, fracture and anisotropy of injection moulded short fibre reinforced polyethylene terephthalate plaques.
    MChE, Delaware, 1984.
  3583. Abboud L Mamish
    Co-extrusion coating of woven fabrics
    MSEng, Lowell, 1990. DA1340627. MA 28(4)634.
  3584. AM Manaker
    Thermal transients in laminated composites
    PhD, Massachusetts, 1973. DA7332184.
  3585. JF Mandel
    An experimental study of the buckling of anisotropic plates
    MS, CWRU, June 1968. Report #23.
  3586. GK Mandell
    Interlaminar shearing behaviour of filamentary composite materials-assumed stress method
    Masters, MIT, 1970.
  3587. JF Mandell
    Fracture toughness of fibre reinforced plastics
    PhD, MIT, 1971.
  3588. PW Manders
    The strength of mixed fibre composites
    PhD, Surrey, September 1979. D29013/79.
  3589. PD Mangalgiri
    Elastic analysis of pin joints in composite plates.
    PhD, IIS-Bangalore, 1980.
  3590. Y Maniette
    <silicon carbide filaments>
    Thesis, Pau - France, December 1988.
  3591. Pradeep Prabhakaran Mankuzhy
    Study of edge effects in laminated sandwich specimens
    MS, Florida Atlantic, 1989. MA1337001. MA 28(1)137.
  3592. RW Mann
    Elastic wave propagation in paper
    Doctorate, Inst.Paper Chemistry - Appleton WI, 1978.
  3593. TA Mann
    An investigation of slip flow in a crosslinked fracturing fluid
    Masters, Mississippi SU, 1984.
  3594. John Robert Mannas
    Numerical simulation of smart laminated plate under impact
    MS, University of Texas at Arlington, 1992.  AAD1351751  MA31(3)1281
  3595. CR Manning
    Residual stresses in filament wound tubes and angle-ply fibre laminates
    Masters, NCSU, 1986.
  3596. LF Mannion
    Dynamic fracture of idealised fibre-reinforced materials
    PhD, Brown, 1981, DA8215589.
  3597. LM Manocha
    <thermal stabilisation of PAN fibres>
    PhD, Delhi, July 1976.
  3598. Muthuswamy Ganapathy Manoharan
    Energy release rate analysis of interfacial cracks in composites
    PhD, Purdue, 1989. DA9008661. DAIB 50(11)5186.
  3599. SH Mansouri
    Nondestructive thermal testing for delamination and inclusion defects in fibreglass laminates using liquid crystals.
    Masters, MIT, 1979.
  3600. MS Mansuria
    Creep of continuous filament twisted yarn
    Masters, NCSU Raleigh, 1967.
  3601. JE Mantei
    Factors that affect the mechanical properties of boron-aluminium composites
    Masters, AFIT, 1968.
  3602. Susan Cavalli Mantell
    Manufacturing process models for thermoplastic matrix composites
    PhD, Stanford, 1991. DA9205680. DAIB 52(9)4939.
  3603. PR Mantena
    Damping capacity measurements for detecting degradation in advanced materials
    MS, Idaho, 1985.
  3604. Prabhakar Raju Mantena
    Vibration control of composite structural elements with constrained layer damping treatments
    PhD, Idaho, 1989. DA9006114. DAIB 50(10)4727.
  3605. Gerald N Manuelpillai
    Space hypervelocity microparticle impact damage in polymer matrix composites
    MASc,  University of Toronto - Canada, 1993.  AADMM87057  MA32(6)1672
  3606. LT Manzione
    Formation and properties of rubber-modified epoxies.
    PhD, Princeton, 1979. DA7919775.
  3607. R Mao
    Stress analysis of axisymmetric sandwich shells of variable thickness
    PhD, Syracuse, 1984. DA8508230. N85-35419.
  3608. A Maranci
    Axial compressive modulus of monofilaments
    Masters, MIT, 1969.
  3609. VM Marcano
    Thermal stresses in laminated beams
    Masters, TA&MU, 1982.
  3610. EO Marchand
    One dimensional transient heat conduction in composite solids
    Masters, Tennessee @ Knoxville & Tullahoma, 1974.
  3611. P Marchand
    Static and dynamic balancing of high-speed fibre composite rotors
    Masters, Ottawa, 1986.
  3612. F Marcola-Journet
    L'allergie cutanee a l'epichlorhydrine:son role dans l'allergie aux resines epoxy
    [Allergic dermatitis induced by epichlorhydrin: its role in epoxy resin allergy]
    DEtat, Dijon, 1977.
  3613. Michele Staud Marcolongo
    Bioactive glass fiber/polymeric composite as a bone bonding biomaterial
    PhD, University of Pennsylvania, 1995.  AADAAI9543118  DAB56(8)4451
  3614. LA Marcus
    Comparison of theoretical initial stress distribution with observed fatigue phenomena in a boron/epoxy plate with a circular hole
    Masters, VPI&SU, 1974.
  3615. I Margaronis
    The production of fibrous composites by dendritic growth
    PhD, Cambridge, 1976. D18185/77.
  3616. Kristen Jockisch Margevicius
    Characterization and degradation of polymer composites for orthopaedic applications
    PhD, Case Western Reserve University, 1993.  AAD9321869  DAIB54(3)1518
  3617. JT Marin
    The effects of axial compressive loads on fibreglass columns
    Masters, Marquette, 1987.
  3618. TF Marinis
    Capillary induced microstructural instabilities in directionally solidified eutectic composites
    PhD, Carnegie-Mellon, 1981. DA8114632.
  3619. RT Marino
    The effect of coatings on blister formation in gel coated laminates
    Masters, Rhode Island, 1986.
  3620. R Marissen
    Fatigue properties of aramid reinforced aluminium laminates
    Thesis, Delft UT, March 1980.
  3621. Roelof Marissen
    Fatigue crack growth in ARALL, a hybrid aluminium aramid composite material: crack growth mechanisms and quantitative predictions of crack growth rates
    PhD, TU Delft, 1988. DA-C59553. DAIC 50(1)139.
  3622. Matthew Mark
    The effects of microwave processing on fiber-matrix adhesion in E-glass fiber composites
    MS,  Michigan State University, 1994.  AADAAI1359802  MA33(3)944
  3623. LR Markham
    Optimum design of composite laminates with thermal effects
    MS, VPI&SU, June 1976. NASA CR 148318. VPI-E-76-11. N76-27360.
  3624. G Marom
    Transverse mechanical properties of fibre-reinforced composites
    PhD, UMIST, 1972.
  3625. E Maroni
    Study of fibre-matrix interface structure and interfacial diffusion phenomena in Cotac-type solidification composites: effect on the thermal stability of the fibres
    PhD, ONERA/Paris-Sud, 1979. In French. ONERA-NT-1979-11. N80-31489.
    Translation: ESA-TT-661, April 1981. N81-27209.
  3626. MT Marques
    Creep of glass fibre reinforced polyester laminates in air and liquid environments
    PhD, Cranfield IT, 1981.
  3627. ERDC Marques
    Stress waves in transversely isotropic media.
    Masters, MIT, 1985.
  3628. WA Marquis
    Fatigue behaviour of graphite/epoxy plates under shear buckling
    Masters, MIT, 1982.
  3629. AL Marsden
    Fracture and tensile properties of continuous fibre reinforced metals
    PhD, Nottingham, 1974. D16800/76.
  3630. WL Marsh
    Production of plates of fibre composites by solidification forming and a combination of both
    Masters, MIT, 1968.
  3631. DAG Marshall
    The mechanical properties of carbon-glass composites manufactured manufactured by a vacuum-box moulding technique
    MSc, Lancaster, November 1974.
  3632. IH Marshall
    The non-linear behaviour of thin initially curved orthotropic plates
    PhD, Strathclyde, 1976. D18465/77.
  3633. JM Marshall
    Influence of water on the properties of polycarbonate.
    PhD, CNAA: Manchester, 1981.
  3634. JW Marstiller
    Effects of viscosity and modes on transonic aerodynamic and aeroelastic characteristics of wings
    Masters, Purdue, 1984.
  3635. TU Marston
    Effect of controlled intermittent interfacial bondng on the tensile properties and fracture toughness of a boron-epoxy composite
    PhD, Michigan, 1973. DA7324632.
  3636. P Marteny
    High speed fracture and retraction of natural rubber
    PhD, Akron, 1982. DA8216610.
  3637. J Martin
    Dispersion of flexural waves in composite elastic circular rods
    Masters, PINY Brooklyn, 1969.
  3638. SE Martin
    Steady state stress wave propagation in fibre reinforced elastic materials
    Masters, Texas @ Austin, 1970.
  3639. J Martin
    Buckling and postbuckling of laminated composite square plates with reinforced central circular holes
    PhD, CWRU, January 1972. DA7218711.
  3640. DJ Martin
    The mechanical behaviour of carbon fibre composite at high rates of loading
    PhD, Loughborough, 1973!.
  3641. RT Martin
    A study of anomalous graphite/epoxy drying curves
    Masters, Tulsa, 1983.
  3642. RH Martin
    The prediction of the fatigue strength of bonded carbon fibre reinforced plastic joints
    PhD, London: City, March 1987. DX74353/87. ASLIB 37(1)1727.
  3643. Andrew Francis Martin
    Vibration and buckling of square composite plates with variable fibre spacing
    PhD, Ohio SU & Miami, 1988. DA8824566. DAIB 49(9)3847.
  3644. MD Martin
    Design, analysis and optimisation of a curved anisotropic beam undergoing large nonlinear dynamic motion
    Masters, Iowa SU, 1988.
  3645. RJ Martin
    A study of failure characteristics in thermoplastic composite material
    Masters, AFIT @ WPAFB, 1988.
  3646. DC Martin
    <tensile strengths of PBZO and PBZT fibres>
    PhD, Massachusetts, 1990.
  3647. Philippe M J W Martin
    Shape optimisation of thin anisotropic shells, applied on filament wound pressure vessels
    Rijksuniversiteit te Gent - Belgium, 1992.  AADC334136  DAIC55(1)232
  3648. Sonia Martin
    Mechanismes d'endommagement des materiaux composites soumis a un choc repete et influence de influence de l'humidite
    MScA, Ecole Polytechnique, Montreal, 1994. AADAAIMM97118  MA33(6)1957
  3649. EA Martine
    Effect of progressive matrix cracking on the elastic moduli of fibreglass-epoxy crossply laminates: a comparison of self-consistent predictions with experiment
    Masters, RPI, 1988.
  3650. P Martineau
    Les composites a renfort filamentaire de carbure de silicium et a matrice a base de titane
    [Composites with silicon carbide filament reinforcement and a titanium based matrix]
    These de 3eme cycle, Bordeaux-I, 21 July 1983. Thesis #1875.
  3651. G Martinez
    The effect of matrix strength and modulus on the compression strength and modulus of continuous aligned fibre composites
    MASc, Toronto, 1983.
  3652. F Martinez
    Material substitution in the automotive industry
    Masters, Pennsylvania, 1986.
  3653. Antonio Martinez-Richa
    Studies of structure and molecular motion in an epoxy/E-glass composite system
    PhD, Case Western Reserve University, 1994.  AAD9425506  DAIB55(4)1612
  3654. TL Martinovich
    Theory and design of plates with a reinforced edge.
    Doctorate, L'vov, 1970.
  3655. B Maruyama
    A study of the influence of chemical species on the formation of aluminium carbide at graphite-aluminium interfaces
    Masters, Texas @ Austin, 1986.
  3656. Benji Maruyama
    Catalysis of aluminium-carbide formation at model graphite-aluminium interfaces
    PhD, Texas @ Austin, 1989. DA8920775. DAIB 50(6)2579.
  3657. AW Marvin
    Development of knitted glass fabrics for use in resin lamination
    MSc, Strathclyde, April 1969.
  3658. RO Maschmeyer
    Rheology of concentrated suspensions of fibres.
    DSc, Washington University-MO, 1974.
  3659. GT Mase
    Acoustoelasticity in media with arbitrarily severe anisotropy
    PhD, California: Berkeley, 1985. DA8610128.
  3660. BA Masi
    Fabrication methods and costs for thermoset and thermoplastic composite processing for aerospace application
    Masters, MIT, 1988.
  3661. SM Maskeri
    A hybrid-stress finite element study of cross-ply and angle-ply laminates under uniform in-plane strain
    Masters, Illinois @ Chicago, 1980.
  3662. A Maslouhi
    Identification des microendommagements dans les composites carbone epoxyde par l'analyse temporal et spectrale des signaux detectes par les techniques d'emission acoustique [Identification of microdamage in carbon/epoxy composites by temporal and spectral analysis of acoustic emission signals]
    Masters, Sherbrooke, 1988.
  3663. BP Maslov
    Investigation of random composites with nonlinear and anisotropic component properties
    Doctorate, Phys.Mech.Sci-Riga, 1983.
  3664. Radhouane Masmoudi
    Etude du delaminage dans un composite stratifie graphite-epoxy soumis a des sollicitations statiques et cycliques
    MSc, Universite de Sherbrooke - Canada, 1991.  AADMM76140  MA31(4)1867
  3665. JJ Mason
    <silicon carbide/aluminium composites>
    MS, UC Berkeley, 1989.
  3666. Deborah Dawn Mason
    Time dependence of the displacement fields around fibre breaks in a composite with a power-law creeping matrix
    PhD, Cornell, 1990. DA9027107. DAIB 51(4)1914.
  3667. EM Masoumy
    The effect of fibre orientation and aspect ratio on the strength and failure mechanisms of short glass fibre ductile epoxy composite
    MS, Washington University-MO, 1979.
  3668. Wael Abdalla Massarweh
    Quality driven performance for drilling in composites and metals
    PhD, Texas A&M University, 1992.  AAD9315366  DAIB54(1)449
  3669. JE Masters
    An experimental investigation of cumulative damage development in graphite epoxy laminates
    PhD, VPI&SU, 1981. N82-20246. DA8126273.
  3670. SC Mastrogeorgopoulos
    Solution of a uniformly loaded orthotropic plate with variable rigidity solved by energy method and theory of large deflections
    Masters, S.Carolina, 1966.
  3671. Lawrence Jay Masur
    Infiltration of fibrous preforms by a pure metal
    PhD, MIT, 1988. DA0378674.
  3672. A Mateen
    Preparation and mechanical properties of glass fibre reinforced polyurethane suitable for formation by reaction injection moulding
    PhD, UMIST, 1983.
  3673. JP Mathers
    Ceramic composites for biomedical applications
    PhD, NCSU Raleigh, 1975. DA762426.
  3674. MD Mathers
    Finite element analysis of laminated composite plates and shells
    Sc.D, GWU, 1976. DA7617138.
  3675. Y Mathieu
    Etude de la mise en forme des thermoplastiques estampables
    [Study of forming of stampable thermoplastics]
    Masters, Montreal, 1988.
  3676. Raj Narain Mathur
    Chemical vapour deposition of titanium nitride coatings reinforced by titanium carbide whiskers
    PhD, Stevens IT, 1990. DA9103492. DAIB 51(9)4548.
  3677. Ashish Kumar Mathur
    Modification of mechanical properties of Kevlar fiber by polymer infiltration
    PhD, Cornell University, 1995.  AADAAI9538838  DAB56(7)3999
  3678. VA Matonis
    An analytical evaluation of a hypothetical three-phase material
    PhD, Connecticut, 1967. DA6801377.
  3679. Philippe Matray
    Contribution a l'etude des ciments magnesiens et leur valorisation comme matrice de materiaux composites renforces de fibres de verre [Contribution to study of magnesia ceramics and their optimisation as a composite material matrix reinforced by glass fibres]
    Doctorate, INSA Lyon, 1990. DA-C184444. DAIC 52(3)476.
  3680. AE Matthews
    Synthesis of hydrophobic crosslinkable resins
    PhD, CNAA: Kingston (Applied Chemistry), March 1989. DX86723.
  3681. Richard Matthews
    Dimensional changes of composite materials in the space environment
    MASc, University of Toronto, 1992.  AADMM78485  MA31(4)1849
  3682. Stephen John Matthews
    Cavitation erosion of aluminium alloys, aluminium alloy/ceramic composites and ceramics
    PhD, Council for National Academic Awards (UK), 1993.  AADC359741  DAIB55(3)992
  3683. DP Mattis
    Morphological characterisation of polyester sheet molding compounds
    Masters, RPI, 1972.
  3684. S Matuszczak
    An investigation of the photo-initiated cationic cross-linking polymerisation of some epoxy resins
    PhD, Durham, 1987. ASLIB 37(3)5200.
  3685. RJ Matyi
    Microstructure of epoxy resins
    Masters, MIT, 1976.
  3686. VC Matzen
    Experimental study of thin plastic sandwich shell structures
    Masters, Purdue, 1968.
  3687. Christophe Philippe Mauge
    Analysis of linear elastic anisotropic solids with arbitrarily oriented cracks
    PhD, Tufts University, 1993.  AAD9324154  DAIB54(4)2159
  3688. FHJ Maurer
    <calculation of composite G and K moduli>
    PhD, Duisburg-FRG, 1983.
  3689. AS Mawenya
    Finite element analysis of sandwich plate structures.
    PhD, Wales: Swansea, 1973.
  3690. ID Maxwell
    Studies of epoxy resins
    PhD, Strathclyde, 1982. D44105/82.
  3691. DL Maxwell
    The fracture of hybrid particulate composites
    PhD, London: QMC, 1987. ASLIB 37(1)1719.
  3692. BL Mayberry
    Vibration of layered anisotropic panels
    Masters, Oklahoma, 1968.
  3693. A Maybury
    An investigation of the failure mechanisms of a carbon fibre reinforced composite material in bending
    PhD, Aston, April 1973.
  3694. M Mayhle
    Properties of composite materials in relation to constituent phase properties and structure
    Masters, University of Washington-WA, 1981.
  3695. Keith Dale Mazachek
    Failure characterization of a graphite/epoxy composite laminate using distortion energy
    PhD, University of Kansas, 1992.  AAD9313139  DAIB54(1)450
  3696. A Mazor
    Effect of short-term environmental loading history on the strength of fibre-reinforced polymer composites
    MSc, Technion-IIT Israel, 1973.
  3697. A Mazor
    Mechanical properties of ductile organic fibre polymeric matrix composites
    PhD, IIT Chicago, May 1985. DA8517582. N86-19453.
  3698. SK Mazumdar
    <fatigue damage in Kevlar/epoxy composites>
    MTech, IIT Kanpur, 1988.
  3699. U Mbanefo
    Mixed-boundary-value problems of stress singularities in the neighbourhood of a fractured and debonded fibre embedded in an infinite elastic matrix
    PhD, UC Berkeley, 1987. DA8813993.
  3700. WJ McAfee
    A three-dimensional scattered light photoelastic analysis of an axisymmetric epoxy pressure vessel
    Masters, Tennessee @ Knoxville, 1968.
  3701. BA McCalla
    Thermal expansion properties of carbon fibre composites and curing characteristics of resins
    PhD, Salford, 1978.
  3702. SP McCarthy
    Investigations of solvent induced structural modifications of fibrous aromatic polyamides
    Masters, Princeton, 1980
  3703. DC McCarthy
    Predicting enthalpies of interfacial adhesion of polymers on pigments & reinforcing fillers
    PhD, Lehigh, June 1984. DA8418423.
  3704. DK McCarthy
    Numerical prediction of fracture in composite materials using a modified strain energy density criterion
    Masters, Wyoming, 1987.
  3705. BE McCarthy
    Parameters affecting vapour-liquid-solid growth of SiC whiskers at 1450 centigrade
    Masters, MIT, 1988.
  3706. PS McClellan
    Fibre reinforced ceramic matrix composites.
    Masters, Virginia, 1985.
  3707. W McClelland
    Stress distribution in a unidirectional filamentary composite sheet with a finite transverse slit
    Masters, Utah, 1975.
  3708. Alan Nigel Robert McClelland
    The injection moulding of long glass fibre reinforced thermoplastic materials
    PhD, Liverpool, July 1988. DX89931. ASLIB 39(1)2326. DAIB 51(5)2565
  3709. PL McConnell
    The fretting fatigue behaviour of graphite fibre reinforced epoxy
    Masters, Toronto, 1986.
  3710. JW McCoy
    Contraction and void formation in boron filament
    Masters, Virginia, 1982.
  3711. JK McDaniel
    Analytical shear buckling investigation of curved composite panels
    Masters, AFIT, December 1984. AFIT/GA/AA/84D-5. AD A153 138. N85-28421.
  3712. PDR McDaniel: see PD Roberts-McDaniel
  3713. WL McDonnell
    The effect of in-situ grown crystals on the mechanical properties of rubber matrix composites
    MS, Washington University-MO, 1968.
  3714. WG McDonough
    Fracture and fatigue of individually dispersed randomly oriented short fibre reinforced epoxy composites
    Masters, MIT, 1987.
  3715. Isobel McDougall
    Finite element analysis of laminated composite shells
    MEng, Pretoria RSA, 1990. DA-663962. MA 28(4)629.
  3716. JP McFadden
    Biaxial buckling of special orthotropic symmetric composite rectangular plates
    Masters, AFIT, December 1984. AFIT/GAE/AA/84D-15. AD A152 958. N85-28417.
    >>> GC McGarth, see GC McGrath
  3717. Colette E Niessen McGarvey
    Photoreactive self-assembled monolayers and their applications in polymer composites
    PhD, Waterloo, 1990. NN-67273. DAIB 53(3)1395.
  3718. MC McGary
    Separation of airborne and structureborne noise radiated by plates constructed of conventional and composite materials with applications for prediction of interior noise paths in propeller
    driven aircraft
    PhD, Stanford, January 1986. DA8612765. NASA-TM-87414. N86-18121. N87-11579.
  3719. SH McGee
    The influence of microstructure on the elastic properties of composite materials
    PhD, Delaware, December 1982. CCM-82-07. DA8309897.
  3720. JM McGlaun
    Axisymmetric stress waves in a composite cylinder.
    Masters, Kentucky, 1975.
  3721. JC McGlenn
    Finite element analysis of laminated orthotropic plates with application to plywood
    Masters, University of Washington-WA, 1966.
  3722. Gareth Charles McGrath
    Structure and properties of carbon fibre reinforced aromatic thermoplastics
    PhD, CNAA: Sheffield, September 1988. DX84740. ASLIB 39(2)5183. DAIB 49(12)5504.
  3723. Peter Albrecht McGrath II
    Finite element analysis of local delamination in composite laminates
    MS, California State University, 1994.  AADAAI1360513  MA33(4)1275
  3724. MA McGuire
    Some effects of strain hardening on deformation, fatigue and fracture in ductile fibre composites
    DPhil, Sussex, 1971.
  3725. SD McIvor
    Heat transfer properties of satellite component materials
    PhD, Salford, 1988. D83072.
  3726. K S McKay
    Aramid fibre reinforced plastic tendons in pretensioned concrete applications
    MEng, Royal Military College of Canada, 1992.  AADMM78069  MA31(4)1867
  3727. RB McKee
    Fracture strength of fibre reinforced composites
    PhD, UCLA, 1967. DA6709890. N68-27629.
  3728. JP McKelvey
    The design of hydraulic mining props in fibre reinforced plastics
    MSc, UMIST, 1984.
  3729. GB McKenna
    Interlaminar effects in fibre reinforced plastics.
    Masters, MIT, 1971.
  3730. GB McKenna
    The development of fibre reinforced polymer composites for orthopaedic applications
    PhD, Utah, 1976. DA7704243.
  3731. James Kenneth McKenna
    Post strengthening of reinforced concrete members using fibre composite materials
    MEng, Royal Military College of Canada, 1993.  AADMM86203  MA32(5)1433
  3732. DO McKenzie
    The analysis of reinforced holes in carbon fibre plates
    PhD, Bristol, February 1976, N77-26556.
  3733. PV McLaughlin
    Limit behaviour and strength of fibrous materials and structures
    PhD, Pennsylvania, 1969. DA6921399.
  3734. P McLaughlin
    Design and manufacture of multilayer and three-dimensional woven reinforcements for composite materials
    MPhil, Queen's University -Belfast, 1992
  3735. TCB McLeish
    Molecular models of polymeric flows
    PhD, Cambridge, September 1987. D59739.
  3736. AW McLennaghan
    Chain extension of polyaryletherketones
    MSc, Lancaster, 1984. Restricted access.
  3737. TJ McMahon
    Stress concentration factors in fibrous composite materials due to noncollinear fibre breaks
    Masters, UIUC, 1977.
  3738. RA McMahon
    Analysis of the training requirements for effective aircraft structural battle damage repair
    Masters, AFIT, 1986.
  3739. HL McManus
    Tensile fracture modes in a family of graphite/epoxy laminates
    Masters, MIT, 1981.
  3740. Hugh Leslie Nicholas McManus
    High-temperature thermomechanical behaviour of carbon-phenolic and carbon-carbon composites
    PhD, Stanford, 1990. DA9102313. DAIB 51(8)4019.
  3741. NJ McNeil
    Improved Mindlin plate bending element and the compatible quarter-point cracktip derivative
    MASc, Toronto, 1982.
  3742. FX McRory
    A two-dimensional transient temperature profile of dielectrically heated solid and honeycomb core organic composite walls
    Masters, AFIT WPAFB, 1987.
  3743. H McShane
    Fibre-reinforced materials fabricated by powder extrusion
    PhD, London, 1978. D25790/79.
  3744. JP McSpedon
    An approach to the design and manufacture of segmentally Pultruded composite structures
    Masters, MIT, 1987.
  3745. Andrew McVey
    The development of polyolefin composites with high wood fibre contents
    MScF, University of Toronto (Canada), 1993.  AADMM87228  MA32(6)1576
  3746. DJ McVicar
    The preparation of the filament winding machine for the fabrication of hybrid composites
    Masters, RPI, 1978.
    >>> MW Mead, see AJ Brightley.
  3747. Gautam Meda
    Analysis of crack bridging in fiber-reinforced ceramic composites
    PhD, Carnegie-Mellon University, 1993.  AAD9412107  DAIB54(11)5906
  3748. A Medhi
    Finite element analysis of consolidation in layered media by using microcomputers
    Masters, West Virginia, 1986.
  3749. SB Medrano
    The influence of installation techniques of strain and deflection in buried FRP pipe
    Masters, Utah SU, 1985.
  3750. DL Medved
    On the effects of spherical fillers on the viscosity of short fibre reinforced plastics
    Masters, MIT, 1982.
  3751. DL Medved
    Weathering of sheet moulding compound: influence on fatigue resistance
    Masters, MIT, 1982.
  3752. E Meehan
    Preparation of silane oligomers and their use as coupling agents
    PhD, City - London, March 1989. DX92921.
  3753. RM Mehalso
    Chemical vapour deposition of boron on a carbon monofilament substrate-a study of residual stresses and deposition kinetics
    PhD, RPI, November 1973. DA7412788.
  3754. Nathan Anton Mehl
    Crystallization of poly(phenylene sulfide) in fiber-reinforced composites:  experimental characterization and computer simulation
    PhD, Princeton University, 1994.  AAD9416135  DAIB54(12)6438
  3755. M Mehrinfar
    Multilevel optimum design of wing box structures with fibre composite panel components
    PhD, UCLA, 1980. DA8016018.
  3756. V Mehta
    Laminated and single-layered rectangular plates involving pyrolytic graphite type materials
    Masters, Delaware, 1968.
  3757. KN Mehta
    Burst strength analysis of finite length specially orthotropic cylinders with different end closures
    Masters, Oklahoma, 1971.
  3758. BS Mehta
    Gaseous diffusion and permeation in fibre reinforced composites
    DSc, Washington University-MO, 1972. DA7311819.
  3759. YP Mehta
    A study of the effects of interface conditions on stress distributions in a fibre reinforced plastic
    MSc, Salford, 1973!.
  3760. Manish Mehta
    Feasible drilling conditions and hole quality criteria for PMR-15/GR composite laminates
    PhD, University of Cincinnati, 1993.  AAD9329943  DAIB54(6)3280
  3761. Sandip Rajnikant Mehta
    Characterization of syntactic polyurethane foams for use in ceramic/polymeric composite structure
    MSEng, University of Massachusetts, 1994.  AADAAI1360530  MA33(4)1274
  3762. HL Meireles
    Interlaminar stresses in laminated composites
    Masters, MIT, 1975.
  3763. J Meissonier
    Processing optimisation of bismaleimide matrix composites
    MS(Eng), University of Washington-WA, 1988.
  3764. YuV Meitin
    Study of the chemical modification of surfaces of glass fibres and of obtaining new types of finish for glass fibre production
    Dissertation, Moscow, 1968.
  3765. RE Melchers
    Optimal fibre reinforced plates, with special reference to reinforced concrete
    PhD, Cambridge, 1971-72.
  3766. Rajesh Ramaswamy Melkote
    Modelling of transport and reaction in evolving fibrous structures
    PhD, Minnesota, 1990. DA9029702. DAIB 51(6)3027.
  3767. GB Mellinger
    Magnetic studies on the effect of heat treatment on carbon fibres
    Masters, University of Washington-WA, 1979.
  3768. SV Mel'nikov
    Stochastic problems of the mechanics of composites with the natural scatter of the properties of components taken into account
    Dissertation, Phys.Sci-Novosibirsk, 1978.
  3769. RJ Melosh
    Development of the stiffness method to define bounds on elastic behaviour of structures
    PhD, University of Washington-WA, 1962.
  3770. JW Melvin
    Theoretical and experimental investigation of the tensile moduli of parallel filament composites
    PhD, UIUC, 1964. DA6503636.
  3771. EW Melvin
    Structural testing of inorganic bonded filament wound cylinders
    Masters, Stanford, 1966.
  3772. NA Memon
    A study of anisotropic slabs, with particular reference to the openings
    MSc, Cambridge, 1982.
    >>> CRC Mena, see CR Corleto Mena.
  3773. DL Mendelsohn
    An analytical and experimental investigation of anisotropic polymer composites at high temperatures
    Masters, Rhode Island, 1988.
  3774. S Mendoca
    Structural strength of reinforced foam/fibreglass composite beam
    Masters, UCLA, 1977.
  3775. RW Meneely
    Stress analysis of an axisymmetric longitudinally stiffened sandwich shell under uniform external pressure
    Masters, Pennsylvania SU, 1966.
  3776. HR Menendez-Fernandez
    Determination of fibre orientation of composites using wide angle X-ray diffraction
    Masters, Tennessee @ Knoxville, 1982.
  3777. E Menessier
    <Auger electron spectroscopy of Nicalon fibres>
    Thesis #216, Bordeaux, 1988.
  3778. VS Merced
    Drive shaft design using numerical optimisation
    Masters, NPS Monterey, June 1980. AD A092 400.
  3779. J Merlin
    Contribution to the study of internal friction in graphite
    PhD, Lyon, June 1969. In French. CEA-R-3820. N69-38067.
  3780. K Mesch
    Untersuchungen zur verbesserung der fertigungstechnik bei der herstellung von einzelteilen und kleinen serien aus glasfaser-verstarkten kunststoffen [Investigation of improvements to the manufacturing techniques by component specification and crushing series for glassfibre reinforced plastics]
    Dissertation, RWTH Aachen, 1969. DS6903.
  3781. A Meskini
    Prediction of stiffness degradation of composite laminate under fatigue loading
    DSc, GWU, 1986. DA8610316.
  3782. LC Mesquita
    Structural optimisation for control of stiffened laminate composite plates using nonlinear mixed integer programming
    PhD, VPI&SU, 1985. DA8605352. N87-10181.
  3783. MJ Messick
    An investigation of unidirectional composite material response under combined normal-shear stress
    Masters, Utah, 1986.
  3784. RL Metcalf
    Dynamic mechanical properties of fibre reinforced composite beams
    Masters, S.Florida, 1969.
  3785. Marianne Pearl Metelnick
    A preliminary study into the use of nickel (3) aluminum-type ribbons as reinforcements of low melting-point metal matrix composites
    MASc, University of Waterloo - Canada, 1991.  AADMM67285  MA31(1)423
  3786. DH Metz
    Experimental investigation of free volume concepts in relationship to mechanical behaviour of an epoxy system subjected to various aging histories
    MS, TA&MU, December 1980.
  3787. JI Metzger
    Large deflections of a longitudinally stiffened rectangular plate
    Masters, Washington University-MO, 1965.
  3788. Dallas W Meyer
    An analytical and experimental investigation of the rheology and interfacial mechanical behaviour of ceramic composites
    PhD, Wisconsin: Madison, 1990. DA9111394. DAIB 52(5)2641.
  3789. PC Michael
    Friction and wear of polymer-carbon composites
    Masters, MIT, 1986.
  3790. MM Michaelidis
    Kinetics of curing of epoxy resins
    MS, Washington University-MO, 1985.
  3791. JC Michel
    Homogenisation des materiaux elastoplastiques avec cavites
    [Homogenisation of elastoplastic materials with holes]
    These de 3eme cycle, Paris, 1984.
  3792. Reinaldo Jose Michelena
    Anisotropic traveltime tomography
    PhD, Stanford University, 1993.  AAD9326527  DAIB54(5)2410
  3793. JG Michopoulos
    Closed form solutions of some plane crack problems in isotropic and anisotropic elasticity
    PhD, National TU of Athens (Ethnikon Metsovion Polytechneion), 1983. In Greek. DA8408521.
  3794. JD Mickol
    An investigation of energy transmission due to flexural wave propagation in lightweight built-up structures
    Masters, Purdue, 1986.
  3795. LA Mignery
    Stitching in laminated composites
    Masters, Purdue, 1983.
  3796. Lezza Ann Mignery
    Viscoelastic adherend effects in adhesively bonded composite-to-composite joints.
    PhD, TA&MU, 1988.  DA8913416.  DAIB 50(4)1518.
  3797. J Mijovic
    A correlation between morphology and fracture properties of epoxy resins
    PhD, Wisconsin: Madison, 1978. DA7921572.
  3798. J Mikami
    The fracture resistance strength of Si/C and C/C composite fabricated by a hot pressing method
    BS, Shibaura IT, tbc April 1988.
  3799. Y Mikata
    Mechanics of coated fibre composites
    PhD, Delaware, 1984. DA8511217. N86-10285.
  3800. TN Mikel
    A model for prediction of the damage and effects of explosive projectiles on helicopter composite material rotor blades
    Masters, TA&MU, 1982.
  3801. WJ Mikols
    Hygrothermal effects on the mechanical properties of epoxies and graphite-epoxy composites
    PhD, University of Washington-WA, 1982. DA8226573.
  3802. RN Miles
    An analytical model for the vibration of laminated beams including effects of both shear and thickness deformation in adhesive layer
    Masters, University of Washington-WA, 1985.
  3803. JV Milewski
    A study of the packing of fibres and spheres
    PhD, Rutgers, 1973. DA7327953.
  3804. MR'Mili
    Application de la mecanique de la rupture au composite carbone-carbone bidirectionnel
    [Fracture mechanics applied to 2-D carbon/carbon composites]
    Doctorate, INSA Lyon, 1987. DAIC 49/1361.
  3805. James Albert Milke
    Structural integrity of composites under load and thermal insult
    PhD, Maryland, 1991. DA9222733. DAIB 53(4)1943.
  3806. SM Milkovich
    Space radiation effects on graphite-epoxy composite materials
    PhD, VPI&SU, May 1984. DA8429166.
  3807. MN Miller
    Bounds for effective dielectric constant and bulk modulus of heterogeneous materials, in terms of statistical information
    PhD, Pennsylvania, 1967. DA6712782.
  3808. RJ Miller
    Stresses in orthotropic shells of revolution with opening
    Masters, California State Coll, 1968.
  3809. BA Miller
    The galvanic corrosion of graphite-epoxy composite materials coupled with alloys
    MS, AFIT Dayton, December 1975. GAE/MC/75D-8. N76-28376. ADA019322.
  3810. AK Miller
    Micromechanical aspects of the environmental behaviour of composite materials
    PhD, Wyoming, 1976. DA7711273.
  3811. HR Miller
    Statistical analysis of the fatigue of composite material
    PhD, Drexel, 1980. DA8019353. N80-30439.
  3812. AP Miller
    Macroscopic stress analysis of unidirectionally reinforced beams
    PhD, Leeds, 1981.
  3813. TJ Miller
    An investigation of the control effectiveness of a laminated sweptback wing
    Masters, Purdue, 1985.
  3814. JD Miller
    Surface chemistry in polymer composites
    PhD, CWRU, 1986. DA8611494.
  3815. LM Miller
    Characterisation of extended chain polyethylene/S-2 glass interplay hybrid fabric composites
    Masters, Georgia IT, 1988.
  3816. Geoffrey Mark Miller
    Design thermal expansion coefficients of carbon epoxy laminates for dimensionally stable structures
    MSE, CSULB, 1990. MA1342830. MA29(3)484.
  3817. Charles Andrew Miller
    Effective properties of heterogeneous materials and behaviour of reactive solids
    PhD, NCSU Raleigh, 1991. DA9122015. DAIB 52(3)1681.
  3818. Larry Michael Miller
    A model for the prediction of thermo-oxidative mass loss of ceramic coated polyamide composites
    PhD, Ohio University, 1995.  AADAAI9524601  DAB56(4)2180
  3819. Peter Daryl Miller
    Fracture behavior of fiber reinforced ceramic composites in compression
    MS, University of Massachusetts - Lowell, 1993.  AAD1352874  MA31(4)1913
  3820. Kristin Lyn Miller
    End effects for plane deformations of an elastic anisotropic semi-infinite strip
    PhD, University of Virginia, 1994.  AAD9425746  DAIB55(5)1909
  3821. JG Miller (1992): see SM Handley
  3822. C Millere
    <compocasting of oxidised SiC/aluminium-alloy composites>
    Thesis, INP Grenoble, 1986.
  3823. IS Millichamp
    The synthesis and characterisation of some new unsaturated polymers
    PhD, Durham, September 1983. D48521/84.
  3824. WJ Mills
    Fatigue crack propagation behaviour of unidirectionnally solidified Ni-Ni3Nb eutectic composites
    Masters, Lehigh, 1973.
  3825. JS Mills
    Transverse microcracking in Celion 6000 graphite/PMR15 polyimide composites
    Masters, VPI&SU, 1980.
  3826. CT Mills
    An investigation of high strength-to-weight compression panels utilising non-load carrying webs
    Masters, Old Dominion, 1986.
  3827. D Milosavljevic
    Wave propagation in elastic plates reinforced by two families of fibres
    PhD, Belgrade-Yugoslavia, 1986.
  3828. GW Milton
    Some exotic models in statistical physics, 1: coherent potential approximation is a realizable effective medium scheme, 2: anomalous first-order transitions
    PhD, Cornell, 1985. DA8504453.
  3829. B-J Min
    The stress analysis of ceramic, polymeric and metallic composite systems by the finite element method.
    PhD, Illinois @ Chicago, 1987. DA8726094.
  3830. Y Jay Min
    Thermal and electrostatic analysis of multi-layer composite structures
    PhD, California: Irvine, 1991. DA9129102. DAIB 52(6)3214.
    >>> L Ming Min, see MM Lei.
  3831. Ali Minachi
    Propagation of elastic waves through inhomogeneous anisotropic materials
    PhD, Iowa State University, 1992.  AAD9234836  DAIB53(7)3537
  3832. JJ Minecci
    The effect of fibre direction on the instability of single-layer glass-cloth resin-impregnated cylinders under uniform axial compression
    Masters, Stanford, 1966.
  3833. Feng Ming
    Nonlinear instability analysis for laminated composite cylindrical shells with isogrid stiffeners
    Graduate dissertation, Beijing Univ Aero & Astronautics, 1986.
  3834. ER Mingo
    Bolted joints in fibre reinforced plastics
    MSc, Bath, 1978.
  3835. PJ Minguet
    Buckling of graphite/epoxy sandwich plates
    SM, MIT, 1986. TELAC Report 86-16.
  3836. Pierre Jacques Minguet
    Static and dynamic behaviour of composite helicopter rotor blades under large deflections
    PhD, MIT, 1989. DA-379852.
  3837. JR Minter
    Structural investigations of fibres and films of poly(paraphenylene benzobisthiazole)
    PhD, Massachusetts, 1982. DA8219829.
  3838. Jose Miranda-Guedes
    Nonlinear computational models for composite materials using homogenization
    PhD, Michigan, 1990. DA9023602. DAIB 51(4)1914.
  3839. MG Mirchandani
    Qualitative and quantitative thermal nondestructive testing of fibre composite materials using infrared thermography.
    Masters(Mech.Eng), Villanova, December 1983.
  3840. Shravan Kumar Miriyala
    Galvanic blistering in carbon fiber polymer composites
    PhD, University of Rhode Island, 1994.  AADAAI9513249  DAB55(12)5462
  3841. S Mirza
    Preparation of aligned discontinuous fibre felts
    PhD, Wales: Swansea, 1982.
  3842. Farshad Mirzadeh
    Compressive strength and behaviour of 8H C3000/PMR15 woven composite material
    PhD, VPI&SU, 1988. DA8911060. DAIB 50(3)1076.
  3843. Ajit Kumar Mishra
    Effect of flow rate during injection moulding on crystallization kinetics and ultimate properties of PEEK and short fibre composites
    PhD, Delaware, 1989. DA9019310. DAIB 51(2)930.
  3844. Sanjay B Mishra
    Transverse permeation and compaction of stacks of random continuous glass fiber mats
    MS, Michigan State University, 1993.  AAD1354902  MA32(3)1011
  3845. I Miskioglu
    Thermal stresses around an insulated elliptical hole in an anisotropic plate
    Masters, Mississippi SU, 1978.
  3846. S Misrov
    Study of luminescence arising in the tensile loading of polymers
    Dissertation, Dushanbe, 1975.
  3847. GG Mistry
    Design of fibreglass reinforced plastic pressure vessels.
    Masters, Worchester PI, 1976.
  3848. JN Mistry
    Tensile buckling of an anisotropic sheet in uniaxial extension
    Masters, Oklahoma, 1982.
  3849. H Mitchell
    A study of the mechanical properties of reinforced plastics
    MSc, Salford, 1970!.
  3850. IW Mitchell
    Studies in the synthesis and characterisation of new polyimides
    MSc, Heriot-Watt, 1988. ASLIB 38(2)3320.
  3851. C Mitropoulos
    Zur theorie der Scwach- und Starkanisotropen faserverstaerkten Schalen
    [Theory of weak and strong anisotropic fibre reinforced shells]
    Dissertation, ETH Zurich, 1979.
  3852. A Mittelman
    <failure modes in Kevlar/epoxy>
    PhD, Hebrew Univ-Jerusalem, 1986.
  3853. A Miyake
    A single fibre pull-out test for fibre epoxy adhesion evaluation of surface modified Kevlar
    Masters, University of Washington-WA, 1983.
  3854. A Miyase
    The feasibility of chromium-carbide coating on graphite fibres for metal matrix composites
    PhD, Waterloo-Canada, 1980.
  3855. J-M Moalic
    Fatigue behaviour of fibre reinforced polymethylmethacrylate
    MSc, Dublin: Trinity, 1988. ASLIB 38(3)6225.
  3856. Mehdi Moazzami
    A higher-order layer-wise theory of laminated plates
    PhD, Ohio SU, 1991. DA9130526. DAIB 52(5)2686.
  3857. Barzin Mobasher
    Reinforcing mechanism of fibres in cement based composites
    PhD, NWU, 1990. DA9031970. DAIB 51(6)3039.
  3858. PB Mody
    Friction and wear of advanced thermoplastic composites: unidirectional and woven carbon fibre/polyetheretherketone systems
    MS, Delaware, 1987.
  3859. AE Moehlenpah
    The effect of time and temperature on the mechanical behaviour of epoxy composites
    DSc, Washington University-MO, 1970.
  3860. T Moeser
    Berechnung der Elastischen Eigenschaften Anisotroper Verbundwerkstoff durch Integrale der Mischungsregeln [Calculation of the elastic properties of anisotropic composites integrals of mixing rules]
    Doctorate, Stuttgart, 1985. ETN-87-99021. N87-19466.
  3861. WC Moffat
    Processing and properties of alumina-zirconia composite ceramics
    DSc, MIT, 1987.
  3862. Soheil Mohajerjasbi
    Structure and mechanical properties of three-dimensional braided composites
    PhD, Drexel University, 1993.  AAD9407138  DAIB54(10)5276
  3863. HN Mohamed-Aly
    An analytical and numerical study of the buckling behaviour of fibre reinforced beams
    PhD, Clemson, 1984. DA8507587. N86-10566.
  3864. Yaghoub Mohammadi
    Compression creep measurements in pultruded angle sections made of fibre glass reinforced plastic
    MEng, McGill University (Canada), 1994.  AADAAIMM91854.
  3865. D Mohan
    Free vibrations of anisotropic plates
    Masters, Delaware, 1970.
  3866. R Mohan
    <flexural properties of unidirectional jute glass hybrids>
    ME, IIS-Bangalore, 1982.
  3867. S Mohan
    Computer-aided design of fabric composite surfaces.
    Masters, Delaware, 1985.
  3868. KK Mohan
    Prediction of effective transport properties of continuous unidirectional fibre composites
    Masters, Michigan TU, 1988.
  3869. DK Mohanty
    Synthesis and transformation reactions of engineering polymers
    PhD, VPI&SU, June 1983. DA8409703.
  3870. Soheil Mohajerjasbi
    Structure and mechanical properties of three-dimensional braided composites
    PhD, Drexel University, 1993.  AAD9407138  DAB54(10)5276.
    >>> ZA Mohd Ishak, see ZAM Ishak.
  3871. RL Mohr
    An experimental determination of the dynamic physical constants of wood
    Masters, Washington SU, 1966.
  3872. DG Mohr
    Stress level dependence of material damping in graphite/epoxy
    Masters, MIT, 1982.
  3873. JA Mohr
    Boundary element solution of composite shafts under torsion
    Masters, Nebraska, 1986.
    >>> MHAHA Mohsen, see MHAH Abdel-Mohsen.
  3874. M Mojtahed
    Application of photoelasticity to determine mode I and mode II orthotropic stress intensity factors
    PhD, Iowa SU, 1984. DA8505851.
  3875. SYa Mokryak
    Investigation of the stress-strain state of helically anisotropic rods
    Dissertation, Tech.Sci-Riga, 1981.
  3876. JH Mol
    Fracture toughness testing of a ceramic matrix composite at elevated temperatures
    Masters, AFIT @ WPAFB, 1988.
  3877. LA Mole
    Sound scattering by inhomogeneous media
    Masters, John Carroll, 1970.
  3878. M Mollaert
    The computer aided design of tension compression structures
    PhD, VUB Brussels, 1984.
  3879. P Molle
    Aeroelastic considerations for NASA composite glider.
    Masters, RPI, 1977.
  3880. GA Molodtsov
    <residual stresses in GFRP fabrication>
    Dissertation, Moscow, 1967.
  3881. KW Molyneux
    An investigation into the feasibility of structural use of glass reinforced plastics in long span lightly loaded structures
    PhD, Aston, 1976.
  3882. MR Monaghan
    Development of a computer controlled autoclave for thermoforming composite materials
    MEngSc, UC Galway - Eire, 1989.
  3883. MM Monib
    Three dimensional elastoplastic finite element analysis of laminated composites
    PhD, Wyoming, November 1980. DA8111609. N81-26181
    UWME-DR-001-102-1. ARO-16370-4-MS. AD A095 147. N81-19241.
    >>> M Monleon Pradas, see MM Pradas.
  3884. JC Monpagens
    <thermostimulated creep (TSC) of composites>.
    PhD, Univ.Paul Sabatier, 1977.
  3885. FM Montamedi
    Interfacial friction in fabric mechanics
    PhD, London: ICST&M, 1989.
  3886. JR Montayne
    EMI shield enhancement through the addition of copper coated glass fibres
    Masters, TA&MU, 1988.
  3887. Michael Peter Montemurro
    Finite element analysis of the impact response of composite structures
    PhD, University of Toronto, 1994.  AADAAINN97321  DAB56(7)3868
  3888. GR Montforton
    Discrete element finite displacement analysis of anisotropic sandwich shells
    PhD, CWRU, 1970.
  3889. TA Montgomery
    Non-linear stiffness effects on aeroelastic divergence
    Masters, University of Washington-WA, 1965.
  3890. Susan Margaret Montgomery
    Quantifying structural variations in fibrous networks from radial in-plane flow behaviour
    PhD, Princeton, 1991. DA9127104. DAIB 52(4)2176.
  3891. Thomas Charles Montgomery
    Control of vortex-induced vibration of nitinol-reinforced composite cylinders
    PhD, Catholic UA, 1991. DA9217079. DAIB 53(1)519.
  3892. HM Montrey
    The micromechanics of fibrous materials
    PhD, Wisconsin, 1972. DA7213988.
  3893. JP Montrym
    The effect of boron, chromium, oxygen active elements and inert fibre reinforcements on the high temperature oxidation behaviour of nickel aluminium
    Masters, RPI, 1988.
  3894. DJ Mook
    Transient analysis of layered composite plates accounting for transverse shear strains and the von Karman strains
    Masters, VPI&SU, 1983.
  3895. SM Moon
    Damage assessment by acousto-ultrasonic technique in composites
    MS, Washington University-MO, 1987.
  3896. Suresh Mahadeorao Moon
    Damage assessment by acousto-ultrasonic technique in composites
    DSc, Washington University-MO, 1988. DA8901452. DAIB 49(11)5001.
  3897. Darwin Gregory Moon
    Characterization and prediction of post-impact fatigue damage in stitched composites
    PhD, Clemson University, 1993.  AAD9419666  DAIB55(3)992
  3898. CT Mooney
    Fracture toughness of elastomer modified epoxy
    Masters, Lowell, 1988.
  3899. FC Moore
    On the stresses and deformations of symmetrically loaded orthotropic shells of revolution
    Masters, GWU, 1966.
  3900. SE Moore
    An anisotropic elastic-plastic stress analysis of a thick-walled graphite cylinder
    Masters, Tennessee @ Knoxville, 1968.
  3901. GD Moore
    Study of the field ionization characteristics of graphite filaments
    PhD, Missouri-Columbia, 1972. DA7321462.
  3902. LA Moore
    On the free vibrations of heated composite plates
    PhD, SMethodist, 1972. DA7227295.
  3903. MA Moore
    In-plane flexural behaviour of smooth pipe bends under elastic and plastic conditions
    PhD, Manchester, 1978.
  3904. JP Moore
    Sandwich laminates- effect of core and facing selection on flexural properties
    Masters, Toronto, 1979.
  3905. GR Moore
    Dynamic mechanical properties of some wood-polymer composite materials
    PhD, Pennsylvania SU, 1981. DA8129191.
  3906. BV Moore
    Mechanical properties and microstructural features of alumina fibre reinforced nickel aluminium matrix composites
    Masters, RPI, 1988.
  3907. RH Moore
    Elastic and time dependent matrix cracking in cross-ply composite laminates
    MS, VPI&SU, 1988.
  3908. Timothy Wayne Moore
    Analysis and testing of innovative design details of a composite fuselage test structure
    MS, Mississippi SU, 1991. MA1345495. MA 30(1)125.
  3909. David Mark Moorehouse
    The design, fabrication and testing issues of an electrorheological fluid-filled composite helicopter rotor blade
    MS, Michigan State University, 1993.  AAD1354903  MS32(3)1003
  3910. Jayachree Moorthy
    Numerical simulation of the nonlinear response of composite plates under combined thermal and acoustic loading
    PhD, Old Dominion University, 1994.  AADAAI9525809  DAB56(4)2157
  3911. OK Morachkovskii
    Investigation of creep anisotropy in construction elements
    Dissertation, Tech.Sci-Riga, 1973.
  3912. Behrooz Moradi
    A study of the buckling behavior of stiffened composite shells
    PhD, University of Illinois at Urbana-Champaign, 1992.  AAD9305624  DAIB53(11)5871
  3913. A Morales
    The effect of filamentous matrix placement methods on the properties of 3-D braided PEEK/graphite composites
    Masters, Drexel University, July 1989
  3914. Sherif Samir Morcos
    Fracture in continuous composite beams
    PhD, Pittsburgh, 1991. DA9209354. DAIB 52(10)5424.
  3915. Karren Leslie More
    Transmission electron microscopy of CVD alpha-silicon nitride and silicon carbide whisker-reinforced silicon nitride before and after creep deformation
    PhD, North Carolina State University at Raleigh, 1992.  AAD9220205  DAIB53(5)2492
  3916. R Moreton
    The spinning of polyacrylonitrile precursor fibres with reference to the properties of carbon fibres
    PhD, Surrey, 1976, D18951/77.
  3917. HS Morgan
    Analysis of non-linear stress-strain behaviour of fibre reinforced composite materials
    PhD, S.Methodist @ Dallas, October 1976. DA7709790.
  3918. WD Morison
    The effects of moisture loss and elevated temperature upon the material damping of fibre reinforced polymer matrix composites
    PhD, Toronto - Canada, 1987.
  3919. Jeffrey Tetsuo Moriyama
    Local buckling of orthotropic hat stiffeners
    MS, California SU Fullerton, 1991. MA1346578. MA 30(2)321.
  3920. P Moroni
    Design of filament wound structures
    MSc Aero Eng, Rome: La Sapienza, 1990. In Italian.
  3921. JP Morriss
    Experimental stress distribution around a discontinuous fibre in a fibre reinforced composite
    Masters, S.Florida, 1969.
  3922. PA Morris
    Some physical properties of textile laminates
    MPhil, Leeds, 1970!.
  3923. S Morris
    The fatigue properties of carbon fibre reinforced plastics
    PhD, Nottingham, October 1970.
  3924. Terri A Morris
    Design, integration, and operation of a process for preparing a silicon carbide whisker-reinforced alumina composite in microgravity
    MSE, University of Alabama in Huntsville, 1992.  AAD1350648  MA31(2)886
  3925. Scott Richard Morris
    The characterization and modelling of advanced thermoplastic composite material foaming processes
    PhD, Purdue University, 1994.  AADAAI9523412  DAB56(2)938
  3926. WO Morrison
    Application of acoustic emission techniques to fabrics.
    MS.Textiles, Georgia IT, June 1976. BLDSC 85/21420.
  3927. CE Morrison
    Mechanical response of an aramid textile yarn to ballistic impact
    PhD, Surrey, March 1984. D51597/84.
  3928. RV Mortensen
    The design and construction of a half-million pound capacity hydraulic press for composite material fabrication
    Masters, Wyoming, 1976.
  3929. A Mortenson
    Solidification of Al-45%Cu in the presence of silicon carbide fibres
    Sc.D, MIT, June 1986.
  3930. J Morton
    The fracture of brittle matrix fibre composites
    DPhil, Oxford, 1974. D15171/76.
  3931. Ayman Soliman Mosallam
    Short and long-term behaviour of a pultruded fibre reinforced plastic frame
    PhD, Catholic U America (DC), 1990. DA9107491. DAIB 51(10)4955.
  3932. CD Mosbruger
    Rayleigh-Lamb wave propagation in anisotropic media.
    Masters, AFIT, 1968.
  3933. JW Moschler
    Investigation of failure modes in fibre reinforced ceramic matrix composites
    Masters, AFIT @ WPAFB, 1988.
  3934. WM Moses
    Measurement of thermal conductivity of PAN-based carbon fibres
    Masters, Georgia IT, 1978.
  3935. H Mosler
    Algorithmus fur beliebige Wickelmustererzeugen bei komplexen Bauteilgeometrien
    [Algorithms for choice of winding patterns for complex components]
    Diploma, IKV Aachen, 1987.
  3936. JM Mosquera
    Dynamic loading of fibre reinforced beams
    Masters, Brown, 1981.
  3937. D Moss
    Measurement of the material damping of a composite material using the resonant dwell technique
    Masters, MIT, 1970.
  3938. Ayman A Mostafa
    Propagation in complex anisotropic layered media
    PhD, Maryland, 1988.  DA8912330.  DAIB 50(4)1573.
  3939. M Mostofi
    A proposed method for measurement of the 21 independent elastic constants of general homogeneous anisotropic materials.
    Masters, Missouri-Columbia, 1970.
  3940. Masoud Motavalli
    Behavior of multilayer composite pipes under internal pressure
    DrScTech, Eidgenossische Technische Hochschule Zurich, 1992.  AADC252975  DAIC53(4)757
  3941. A Mottonen
    Exact finite element method for sandwich beam in combined bending and compression and in thermal loading.
    Diploma, Tampere UT-Finland, 1987. In Finnish.
  3942. JP Mottram
    The failure of carbon fibre reinforced plastic laminated plates under biaxial stress
    PhD, Durham, May 1984. D52006/84.
  3943. Heike Motz
    Characterisation of PEEK and short fibre PEEK thermoplastic composites
    PhD, Delaware, 1987. DA8808045.
  3944. Missoum Moumene
    Determination of stresses around cutouts in multilayered composite plate and shell structures
    PhD, Illinois @ Chicago, 1989. DA9003736. DAIB 50(9)4185.
  3945. MS Mousa
    A study of field electron emission from composite microregimes
    PhD, Aston, 1984.
  3946. MS Mousa
    On the stability analysis of hybrid composite dynamical systems
    PhD, Iowa SU, 1986. DA8703735.
  3947. Metwally Mohamed Moussa
    Prediction of the behavior of short-fiber metal matrix composites using three-dimensional nonlinear finite element analysis
    PhD, Illinois Institute of Technology, 1990.  AAD9301991  DAIB53(9)4909
  3948. JC Moussion
    Analyse des plaques elastiques constituees de deux couches materiaux. Application au calcul des contraintes a l'interface. [Analysis of bimaterial elastic plates. calculation of interfacial constraints]
    3eme cycle, Poitiers, 6 December 1983.
  3949. B Moustakakis
    A continuum microstructure theory for laminated composites
    PhD, Pennsylvania SU, 1975. DA7522700. N75-33180.
  3950. N Moutafis
    Problems in orthotropic elasticity
    PhD, Aston, 1975.
  3951. E Mowforth
    The mechanical properties of compression-moulded glass-reinforced polyester systems
    PhD, Surrey, 1971!.
  3952. ET Moyer
    Analytical modelling of mechanical-interface failure prediction
    Masters, Lehigh, 1979.
  3953. Denise Joy Degeorge Moyer
    The role of surface pretreatment and surface analysis in the bondability of carbon fibre/polyimide matrix composites
    PhD, VPI&SU, 1989. DA9013523. DAIB 50(12)5655.
  3954. VA Mozhaev
    Investigation of wear in metals by friction plastics.
    Dissertation, Rostov-on-Don, 1972.
  3955. Anthony Michael Mrse
    Effects of fibre misalignment on compressive properties of advanced thermoplastic composites
    MASc, University of Toronto, 1991.  AADMM65545  MA30(4)1453
  3956. Shreesh Mudri
    The behavior of adhesively bonded fiber reinforced plastic beam-to-column connections
    MS, University of Nevada, Reno, 1994.  AAD1358985  MA33(2)635
  3957. R Muehlenmeister
    Universelles Messwerterfassungssystem fur Kunststoffpressen
    [Universal measuring frame system for a plastics press]
    Diplomarbeit, IKV-Archiv-Nr-8441, 1984!.
  3958. DJ Mueller
    Zur Herstellung von Kohlenstoffasern aus Polyacrylnitril uber die Katalytische Cyclerisierung des Polymeren [Carbon fibres from PAN by catalytic cyclisation polymerisation]
    Dissertation, Karlsruhe, 1973.
  3959. J Mueller
    Spannungsverteilung an gelochten ueber einen Boltzen belasteten Staeben aus kohlenstoffaserverstaerkten kunststoff
    [Stress distribution around a loaded bolt hole in a carbon fibre reinforced plastic rod]
    Dissertation ETH-5546, Swiss Federal Inst.Technology, 1975.
  3960. S Mueller
    <TEM of commercial carbon fibres>
    PhD, Karlsruhe, in preparation at 1984.
  3961. Joan Therese Polesnak Muellerleile
    Crystallisation behaviour and morphological features of two LaRC polyimides and local orientation studies of two Semicrystalline model composites
    PhD, VPI&SU, 1991. DA9209611. DAIB 52(10)5297.
  3962. Bakhtiar Muin
    Deducing lower order theories from elasticity theory
    PhD, University of Wisconsin - Madison, 1993.  AAD9331274  DAIB54(9)4765
  3963. U Mukhopadhyay
    The development of the optical diffraction technique for interpreting X-ray photographs of jute and other fibres
    PhD, UC-Cardiff, 1969!.
  3964. AK Mukhopadhyay
    On the thermoelastic response of composite material
    PhD, Delaware, 1981. DA8109625. N81-24177.
  3965. VG Mukunda
    Analysis of matrix damage in unidirectional composites
    PhD, University of Missouri - Rolla, 1992.  AAD9224675  DAIB53(7)3583/4.
  3966. MJ Mulheron
    A study of thermal strains in glass fibre reinforced plastics
    PhD, Surrey, May 1984. D52096/84.
  3967. JF Mulhern
    Applications of plasticity theory to the mechanics of fibre-reinforced materials
    PhD, Nottingham, 1969!.
  3968. MA Mull
    A statistical approach to fracture toughness in composites
    Masters, CWRU, 1986.
  3969. W Muller
    <CFRP reciprocating components for hot oil exposure>
    Experimental thesis, IKV Aachen, 1983 . S-8344.
  3970. ES Muller
    Material damping measurements of 2-D carbon-carbon composite beams
    Masters, AFIT WPAFB, December 1986. AFIT/GAE/AA/86D-10. AD A179 109. N87-23700.
  3971. DK Mullick
    Torsional vibrations of a composite elastic-viscoelastic cylindrical shaft
    Masters, S.Dakota SU, 1978.
  3972. RB Mullininx
    FRP/plywood panel stiffness
    Masters, South Carolina, 1988.
  3973. SF Mulvany
    Application of carbon and glass fibre hybrid composites to load bearing orthoses and prostheses
    PhD, CNAA: Kingston, March 1982. D43764/82.
  3974. DR Mulville
    A tensor transformation method for the determination of elastic constants and principal directions in orthotropic media.
    Masters, GWU, 1966.
  3975. Daniel Raymon Mumm
    Toughening of brittle materials through fiber reinforcement: role of the fiber/matrix interface
    PhD, Northwestern University, 1994.  AADAAI9521776  DAB56(3)1652.
  3976. Ramachandra Vummichetty Muneppachetty
    An investigation on the biaxial cruciform specimen of fabric flexible composite
    MS, University of Nevada - Reno, 1993.  AAD1353457  MS32(1)329
  3977. Hafiz Muhammad Munir
    Modelling moisture-dependent anisotropy in unsaturated heterogeneous media
    PhD, Minnesota, 1992. DA9215987. DAIB 53(1)414.
  3978. TE Munns
    Processing-structure-property relationships in boron tri-flouride catalysed amine cured epoxy matrices
    Masters, University of Washington-WA, 1983.
  3979. H Murakami
    On mixture theories for diffusion and wave propagation in composite materials
    PhD, UCSD, 1978. DA7810577. N78-30177.
  3980. K Murali
    Electrical behaviour of solvent cast metal reinforced composites
    Masters, Akron, 1987.
  3981. Krishna Murthy Murali
    Unified constitutive modeling of creep and plasticity of metals and metal-matrix composites
    PhD, Rutgers University: State University of New Jersey at New Brunswick, 1993.  AAD9333431  DAIB54(7)3817
  3982. Joseph Frank Muratore
    Ultrasonic spectroscopy of inhomogeneous media
    PhD, SUNY Stony Brook, 1987. DA8900322. DAIB 49(10)4364.
  3983. P Muri
    Adhesive bond characterisation in relation to fibre-reinforced composites
    Masters, Princeton, 1985.
  3984. MC Murphy
    The dependence of glass reinforced resin composite fracture energy on temperature and humidity
    Masters, Vermont, 1969.
  3985. MC Murphy
    The principles of fracture mechanics applied to the failure modes of fibre reinforced composites and to the fatigue of selected brittle resins and glass
    Masters, Vermont, 1972.
  3986. NAD Murphy and MG Thorton
    Scarf joints in unidirectional carbon fibre reinforced plastics
    BSc, Bristol, June 1980. BU-258. N81-20193.
  3987. DP Murphy
    Analytical prediction of crack initiation and propagation in unidirectional composites
    Masters, Wyoming, 1981.
  3988. AJ Murphy and DC Murray
    Materials selection and design study of a composite microlight wing structure
    BSc, Bristol, June 1985. BU-335. ETN-87-99198. N87-20263.
  3989. PF Murphy
    Mould design for advanced fibre reinforced thermoplastic composites
    Masters, UC - Galway, 1990.
  3990. FC Murray
    Developmental research on composite container materials.
    PhD, Virginia, 1978. DA7903515.
  3991. RN Murray
    Sandwich beams subjected to transverse load
    MPhil, Surrey, 1986. ASLIB 39(1)1956.
  3992. Eric Roger Murray
    The diffusion of lead toward the interface of a rapidly solidified carbon fiber reinforced aluminum-lead matrix composite
    PhD, Cornell University, 1992.  AAD9300785  DAIB53(8)4314.
    >>> DC Murray, see AJ Murphy.
  3993. PLN Murthy
    A new engineering theory of planar bending and applications
    PhD, Georgia IT, December 1981.
  3994. CRL Murthy
    Some studies on acoustic emission signal analysis
    PhD, IIS Bangalore, 1982.
  3995. SS Murthy
    A triangular anisotropic thin shell element based on discrete Kirchoff theory
    PhD, Arizona, 1983. DA8405505. N84-27060.
  3996. VS Murty
    Morphological changes during deformation of amorphous polymers
    DSc, Washington University-MO, 1974.
  3997. Daniel Muscat
    Silicon nitride/silicon nitride whisker-reinforced composites
    MEng, McGill University, Canada, 1990.  AADMM67849  MA30(4)1453
  3998. C Muser
    Composite design of a B727 elevator actuator rib
    Masters, RPI, 1979.
  3999. C Muser
    Cylindrically orthotropic circular plates with a concentric hole & with properties varying radially
    DEng, RPI, August 1981. DA8200468. N82-23544.
  4000. M Mushkatel
    Mechanical properties and weathering stability of bromostyrene-crosslinked polyesters and of their glass fibre composites
    MSc, Hebrew Univ-Israel, 1975.
  4001. Nicholas John Musson
    The squeeze casting of aluminium alloys and composites
    PhD, Southampton, 1990. DA-C211546. DAIC 53(1)166.
    >>> AMA Mustapha, see AM Ahmad Mustapha.
  4002. S Muter
    Cost comparisons of alternate designs: an information based model
    MS(ME), Massachusetts Institute of Technology, June 1993
  4003. Moses Wambua Mutua
    Active buckling control of nitinol-reinforced composite beams
    PhD, Catholic UA, 1992. DA9217088. DAIB 53(1)519.
  4004. Ahmet Turgut Mutel
    Rheological behaviour and fibre orientation in simple flows of glass fibre filled polypropylene melts
    PhD, McGill, 1989.  DA-565411.  DAIB 50(4)1321.
  4005. F Muttin
    Modelisation de membrane. Application de l'analyse mecanique des voiles de bateau
    [Modelling of membranes applied to the sails of boats]
    Doctorate, Nice, 1989.
  4006. MJ Mutz
    The fracture mechanics, morphology and statistics of nylon66 fibre
    PhD, Princeton, 1974. DA7520653. N75-32177.
  4007. P Myler
    Glass reinforced plastic pipe bends under a variety of loads
    PhD, UMIST, June 1985. D78522.
  4008. Youngjoo Na
    Effects of web density and fiber orientation on pore characteristics of aramid and simulated nonwoven fabrics
    PhD, University of Maryland, 1994.  AAD9508023  DAIB55(10)4586
  4009. AE Naaman
    A statistical theory of strength for fibre reinforced concrete
    PhD(Civil Eng), MIT, 1972.
  4010. RR Nachlinger
    On constitutive equations for materials with memory.
    PhD, Texas @ Austin, 1968. DA6816121. N69-27970.
  4011. M Naeem
    The resistance of glass reinforced thermosetting polymers to thermohumid conditions
    PhD, Loughborough, 1985. D66712/86.
  4012. M Naeem
    Fracture and fatigue of glass fibre reinforced plastics
    PhD, Sheffield, 1988. ASLIB 38(4)8468.
    >>> G de Naegel, see G De-Naegel
  4013. Y Naerheim
    Fracture characteristic of a ductile matrix/brittle fibre composite
    Masters, Cincinnati, 1971.
  4014. AP Nagarkar
    Nonlinear temperature dependent failure analysis of finite width composite laminates
    Masters, VPI&SU, 1980.
  4015. RJ Nagem
    Development of a liquid crystals kit for the structural integrity assessment of fibreglass watercraft
    Masters, MIT, 1982.
  4016. GK Nagendra
    Finite element analysis of three dimensional composite solids
    Masters, Nebraska, 1981.
  4017. Somanath Nagendra
    Optimal stacking sequence design of stiffened composite panels with cutouts
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9500822  DAIB55(8)3431
  4018. Suresh Nagesh
    Time-temperature analysis of damage initiation and growth in composite laminates
    PhD, Drexel University, 1992.  AAD9237891  DAIB53(8)4330
  4019. M Naghieh
    Acoustics of fibre reinforced spherical shells
    PhD, Pennsylvania SU, 1971. DA7128716.
  4020. Mohamad A Nagi
    Development and application of light-weight carbon fibre-reinforced cement composites
    PhD, Michigan SU, 1990. DA9102712. DAIB 51(9)4501.
  4021. DA Nagy
    Dual finite element system for stretching and bending of orthotropic plates
    Masters, MIT, 1967.
  4022. MN Nahas
    Failure of laminated fibre-reinforced composite structures subjected to combined loadings
    PhD, Cranfield IT, 1980. D37273/81. DA8170029.
  4023. R Nahavandi
    Effects of interfaces on fracture and fatigue of the metal fibre/metal matrix composite
    PhD, Sussex, 1983. D52193/84.
  4024. RVA Naik
    An analytical and experimental study of clearance and bearing-bypass load effects in composite bolted joints.
    PhD, Old Dominion, 1986. DA8703789.
  4025. SM Nair
    Quantitative evaluation of porosity in graphite-epoxy composites using the frequency dependence of ultrasonic attenuation
    Masters, Iowa SU, 1986.
  4026. Mohamad Khaled Naja
    Nonlinear random vibration of composite laminated plates
    PhD, Michigan State University, 1993.  AAD9418040  DAIB55(2)518
  4027. BC Nakra
    Vibration of viscoelastically damped laminated structures
    PhD, London, 1966.
  4028. Jae-Do Nam
    Polymer matrix degradation: characterisation and manufacturing process for high-temperature composites
    PhD, University of Washington-WA, 1991. DA9203289. DAIB 52(8)4348.
  4029. PP Nan
    Buckling of stiffened sandwich panels
    Masters, West Virginia, 1976.
  4030. A Nanda
    Studies in fracture behaviour of glass fibre epoxy composites
    MTech, IIT-New Delhi, 1985.
  4031. Manish K Nandi
    The chemistry of ceramics and polymer-metal and polymer-ceramic composites
    PhD, Pennsylvania SU, 1990. DA9104937. DAIB 51(9)4373.
  4032. DS Nandra
    The relationship between structure, properties and problem in application of reinforced thermoplastic rubber mouldings
    PhD, Loughborough, December 1979. D29964/80.
  4033. AP Nanyaro
    Evaluation of the tensile polynomial failure criterion for composite materials
    MASc, Toronto, 1978.
  4034. N Naranong
    Effect of high energy radiation on mechanical properties of graphite fibre reinforced composites
    MS, NCSU Raleigh, 1980. NASA-CR-163853. N81-15024.
  4035. Subramaniam Narayan
    Characterisation of fibre reinforced phenolic composites
    PhD, Missouri-Rolla, 1992. DA9224677. DAIB 53(4)1871.
  4036. TV Narayanan
    Penny shaped crack in infinite matrix reinforced by infinite fibres
    PhD, Lehigh, 1974. DA7411351.
  4037. D Narayen
    Fracture of titanium metal matrix composites
    Masters, Texas @ Austin, 1983.
  4038. SD Nare
    Curing of phenolic novolac resin system
    Masters, Wright SU, 1975.
  4039. KA Narh
    Polymer adsorption layers and their implications for the processing and property control of fibrous composites
    PhD, Bristol, 1981.
  4040. VL Narusberg
    Stability and optimum design of orthotropic cylindrical shells with a filler in axial compression.
    Dissertation, Phys.Mech.Sci-Riga, 1975.
  4041. KA Nass
    Dielectric thermal analysis of polymeric matrices
    PhD, University of Washington-WA, 1989.
  4042. EA-A Nasser
    Analysis of the dynamic and static behaviour of laminated composites with bonds
    PhD, Cincinnati, 1981. DA8115387. N81-28173.
  4043. V Natarajan
    Preparation and properties of diamond-like carbon films and intercalated graphite fibres
    PhD, Nebraska-Lincoln, 1984. DA8504812.
  4044. HE Navarrete
    The rheology of glass filled polystyrene
    Masters, Connecticut, 1970.
  4045. Gilles Navarre
    Etudes des mecanismes d'endommagement et de rupture des materiaux composites a fibres et a matrice ceramiques
    [Study of fracture and damage mechanisms of ceramic-ceramic fibre composites]
    Doctorate, INSA Lyon, 1990. DA-144084. DAIC 51(4)645.
  4046. P Navi
    Harmonic wave propagations in composite materials
    PhD, UCLA, 1973. DA7411556.
  4047. S Naviroj
    Spectroscopic study of silane coupling agents in composite systems
    PhD, CWRU, 1983. DA8314586.
  4048. F Nazem
    Elongational viscosity of a filled thermoplastics
    DSc, Washington University-MO, 1973.
  4049. II Necipoglu
    Water sorption and diffusion in polyester resins
    MScTech, Sheffield, 1981.
  4050. F Nedjat-Hayem
    Environmental sensitive cracking of polyester resin.
    PhD, Nottingham, May 1983. D47467/83.
  4051. Lynn James Neergaard
    Processing, characterisation and mechanical properties of beta-silicon nitride whisker/silicon nitride matrix composites
    PhD, UIUC, 1990. DA9114360. DAIB 51(12)6053.
  4052. K Neglo
    Analyse par elements finis de l'endommagement de plaques de materiaux composites ayant un trou central circulaire
    [Finite element analysis of damage in composite material plates with a circular central hole]
    Masters, Sherbrooke, 1983.
  4053. PV Negron-Marrero
    Large buckling of circular plates with singularities due to anisotropy
    PhD, Maryland, 1985. DA8608837.
  4054. DG Neilly
    The development of methods for the study of properties and perfomance in fabrics for industrial and engineering end-uses
    PhD, Leeds, February 1986. D89796. ASLIB 36(4)9104.
  4055. E Neise
    Verarbeitung von faserverstaerkten Kunststoffen mit Industrierobotn
    [Manufacture of FRP composites with industrial robots]
    Doctorate, RWTH Aachen, 1986. DS8608.
  4056. MNMG Nejhad:  see MNM Ghasemi Nejhad
  4057. Eric Brian Nelsen
    Water intrusion of graphite/epoxy sandwich panels subjected to low level impact damage
    MS, California State University, 1995.  AADAAI1362342  MA33(6)1958
  4058. TP Nelson
    Internal pressure measurements and liquid state energies
    DSc, Washington University-MO, 1971.
  4059. KW Nelson
    Plastics technology and its application to automobile design
    Masters, Illinois IT, 1975.
  4060. DAR Nelson
    New materials model for nonlinear multimodulus deformatn behaviour of ATJ-S graphite
    PhD, S.Methodist @ Dallas, February 1975. DA7521414.
  4061. DJ Nelson
    On mechanics of discontinuous fibre reinforced composite materials, with particular reference to damping
    PhD, Glasgow, 1976.
  4062. MD Nelson
    An investigation of compressive failure in carbon/epoxy cylindrical shells under uniaxial and biaxial loading conditions
    Masters, Utah, 1986.
  4063. CR Nelson
    Data approximation for time-temperature dependent advanced composite materials
    Masters, Marquette, 1987.
  4064. Karl Marius Nelson
    High-performance thermoplastic matrix composite consolidation processes
    PhD, University of Washington-WA, 1990. DA9109817. DAIB 51(11)5465.
  4065. Donald Scott Nelson
    Morphology and optical properties of poly (p-phenylenebenzobisoxazole) rigid-rod polymer and molecular composites
    PhD, University of California - Berkeley, 1991.  AAD9228788  DAIB53(5)2436
  4066. James Welch Nelson
    Prediction of the post-cure deflection of a composite spacecraft antenna reflector
    MS, California State University Long Beach, 1993.  AAD1356107  MA32(3)1050
  4067. TE Nemcheck
    Stress in a variable thickness anisotropic plate.
    Masters, Akron, 1973.
  4068. MP Nemeth
    Buckling behaviour of orthotropic composite plates with centrally located cutouts
    PhD, VPI&SU, 1983. DA8402803.
  4069. Tahera Nensi
    A study of stress-induced whitening in glass-fibre reinforced epoxy laminates
    PhD, Surrey, April 1988. DX83019. ASLIB 39(1)2328. DAIB 49(7)2805.
  4070. DN Nesin
    Failure by delamination in composite material structures.
    Dissertation, TS Moscow, 1964.
  4071. JB Nestleroth
    Ultrasonic feature mapping for anomaly identification in composite materials and adhesively bonded structures
    PhD, Drexel, 1985. DA8517062. N86-17771.
  4072. AN Netravali
    The influence of water and high energy radiation on thermal and spectroscopic characteristics of an epoxy
    PhD, NCSU Raleigh, 1984. DA8500245.
  4073. AT Nettles
    Residual property assessment of impacted carbon fibre composites
    Masters, Georgia IT, 1988.
  4074. H Neuhaus
    Elastizitaetszahlen von Fichtenholz in Abhaengigkeit von der Holzfeuchtigkeit
    [Young's modulus of pinewood related to moisture content]
    Dissertation, Bochum, 1981.
  4075. S Neumann
    The effect of external stresses on moisture absorption in composite materials
    PhD, Hebrew Univ-Israel, in preparation @ Apr 85
  4076. GE Neuwerth
    The effect of fibreglass tensile reinforcement on the strength of simply supported concrete beams
    Masters, Rutgers, 1969.
  4077. GE Neuwerth
    Fibreglass as a reinforcement material for reinforced concrete elements
    PhD, Rutgers, 1974. DA7508424.
  4078. NL Newhouse
    Mechanical and transient hygrothermal loading of multi-layer orthotropic cylinders
    PhD, Nebraska-Lincoln, 1984. DA8423818. N85-18359.
  4079. A Newton
    The physical properties of nonwoven fabrics.
    PhD, Manchester, 1965.
  4080. DC Newton
    Application of an isoparametric finite element method to the free edge problem of composites
    Masters, Utah, 1987.
  4081. JA Newton
    Finite element modelling for interlaminar stresses in composite plates
    Masters, Washington SU, 1988.
  4082. CF Ng
    Dynamic behaviour of postbuckled composite plates under acoustic excitation
    PhD, Southampton, July 1986. D72240/87. DAIC48/3180C.
  4083. H Ng
    Simulation of studies for a pultrusion process of a composite polyester system
    Masters, CWRU, 1988.
  4084. Hendra Ng
    Studies of reactive polymer processing for dicyclopentadiene RIM and filled epoxy systems
    PhD, CWRU, 1992. DA9220036.  DAIB 53(2)877.
  4085. DA Ngo
    Analysis of thermal and mechanical properties of high temperature composites
    Masters, RPI, 1987.
  4086. HC Ngo
    Dynamic analysis of delamination growth by finite element models
    Masters, CSULB, 1988.
  4087. TC Nguyen
    The effect of thermal annealing and attendant resin crystallization on the mechanical properties of polycarbonate composites
    MS, Washington University-MO, 1972.
  4088. NQ Nguyen
    Optimisation of strength and fracture resistance of laminated composites
    MS, Washington University-MO, 1977.
  4089. DT Nguyen
    Fail-safe optimal design of complex structures with sub-structures and composite materials
    PhD, Iowa, 1982. DA8222264.
  4090. PX Nguyen
    Fatigue fracture of short-glass-fibre reinforced polyvinyl chloride
    Masters, CWRU, January 1985.
  4091. HX Nguyen
    Investigations of the interfacial structures of high-performance composites
    PhD, CWRU, 1986. DA8702090.
  4092. VD Nguyen
    A fabrication stress model for axisymmetric filament wound composite structures
    PhD, VPI&SU, 1988. DA8810778.
  4093. Dung Tri Nguyen
    Buckling analysis of composite laminates with stiffeners
    MS, CSULB, 1990. MA1342835. MA29(3)485.
  4094. Steve Hungba Nguyen
    P-approximation beam elements for elastostatics and elastodynamics with isotropic, generally orthotropic and laminated composite materials
    PhD, Kansas, 1990. DA9110901. DAIB 51(11)5543.
  4095. Tu-Hoan Bruce Huu Nguyen
    Fatigue crack propagation of SCS-6/titanium alloy composites
    PhD, University of California - Los Angeles, 1993.  AAD9332605  DAIB54(7)3817
  4096. Khang V Nguyen
    Free vibration analysis of rectangular orthotropic cantilever plates with point supports
    MASc, University of Ottawa, 1994.  AADAAIMM95961  MA33(5)1575
  4097. SH Ni
    The role of organotitanate coupling agents in the metal/polymer and glass/polymer adhesion
    Masters, Tufts, 1980.
  4098. DJ Nicholls
    An evaluation of one pound of resin to assess its performance as a composite matrix
    Masters, Dayton, 1983.
  4099. CI Nicholls
    Some thermal properties of glasses & composites
    DPhil, Oxford, 1983.
  4100. AP Nicholls and RC Noble
    The structural behaviour of asymmetrical composite columns
    BSc, Bristol, June 1986. BU-347. ETN-87-99209. N87-19468.
  4101. JE Nichols
    An investigation into the effects of changes in temperature and shear rate upon the viscous behaviour of crosslinked fracture fluid
    Masters, TA&MU, 1986.
  4102. TM Nicholson
    Anisotropic structures in liquid crystal polymers
    PhD, Cambridge, 1988/89.
  4103. L Nicolais
    Failure criteria for polymeric solids
    MS, Washington University-MO, 1971.
  4104. Perikles D Nicolaou
    Fabrication of continuous fiber metal matrix composites using the foil/fiber/foil technique
    PhD, Carnegie-Mellon University, 1994.  AAD9419193  DAIB55(2)551
  4105. G Niederstadt
    Beitrag zur Berechnung von Teilen aus GFK
    [Study of partial calculations for GFRP]
    Dissertation, TH Hannover, 1966.
  4106. G Nieh
    The adsorption of activated carbon fibre
    Masters, North Dakota, 1986.
  4107. World Li-Shih Nieh
    The chemical structure, molecular weight and dynamic mechanical properties of phenol-formaldehyde resin
    PhD, Mississippi SU, 1990. DA9108963. DAIB 51(11)5117.
  4108. JM Nielsen
    Experimental stress distribution around an elastic inclusion in an infinite plate
    Masters, S.Florida, 1967.
  4109. JA Nielsen
    Kinetics of the PGE/NMA epoxy polymerisation.
    Masters, Nebraska, 1985.
  4110. Kristine Anne Nieman
    Mechanical property enhancement of recycled high density polyethylene and wood fibre composites due to inclusion of additives
    MS, Michigan SU, 1989.  MA1336401.  MA 27(3)411.
  4111. MF Niemeyer
    Processing-structure-property relationships in cold poly(etheretherketone) and polyphenylenesulphide
    Masters, Akron, 1989.
  4112. RSC vd Nieuwenhuizen: R Sjouke Ciaron van den Nieuwenhuizen
  4113. P Nikbakht
    Study of plastic materials compared to metallic materials
    Masters, Arizona SU, 1986.
  4114. VP Nikolayev
    Dissertation, Moscow, 1968.
  4115. SN Nikonova
    Study of physicochemical processes at the glass size-resin interface in GRP
    Dissertation, Moscow, 1967.
  4116. J Nilforoush
    Experimental stress analysis of composite plates with holes
    Masters, GWU, 1970.
  4117. Xin Ning
    Reactive processing and material characterisation of thermoplastic and thermoset polymers and their composites
    PhD, CWRU, 1991. DA9202267. DAIB 52(8)4225.
  4118. John Dung Ninh
    Finite element method applied to deformation of metallic-glass ribbon reinforced glass-ceramic matrix composite material
    MS, Michigan SU, 1991. MA1345136. MA 30(1)140.
  4119. EM Nishimura
    Fibre-reinforced syntactic sulphur foams
    Masters, Toronto, 1982.
  4120. F Nitzsche
    Aeroelastic analysis of a darrieus-type wind turbine blade with troposkein geometry
    PhD, Stanford, June 1983.
  4121. T-M Niu
    Biaxial fatigue of graphite/epoxy [#45]s tube
    DrEngr, RPI, May 1983. DA8321209. N84-15210.
  4122. Lin Niu
    Determination of the elastic constants of composite materials from ultrasonic group velocity measurements
    PhD, Cornell University, 1992.  AAD9236006  DAIB53(7)3584
  4123. Y Nivas
    Limitation of Griffith flaws in glass-matrix composites.
    MS, California: Berkeley, November 1968. UCRL-18586. PBxx-182654.
  4124. JA Nixon
    Analysis of cure of polyester resins and sheet moulding compounds
    PhD, Nottingham, May 1984. D51565/84.
  4125. Robert David Nixon
    Kinetics and mechanisms of creep in sintered a-SiC and SiC whisker reinforced SiN and mullite
    PhD, NCSU @ Raleigh, 1989. DA8918124. DAIB 50(8)3647.
  4126. Mark William Nixon
    Aeroelastic response and stability of tiltrotors with elastically-coupled composite rotor blades
    PhD, University of Maryland, 1993.  AAD9425105  DAIB55(4)1531.
    >>> RC Noble, see AP Nicholls.
  4127. James Phillip Nokes
    The use of high-frequency dynamic information for the evaluation of damage in fibre reinforced composite materials
    PhD, Michigan SU, 1992. DA9223231. DAIB 53(3)1454.
  4128. SC Nolet
    The effect of ply thickness on the initiation and growth of delamination damage in graphite/epoxy laminates with holes under compression-compression fatigue
    Masters, MIT, January 1984.
  4129. S Nomura
    Micromechanics of short fibre composite materials
    PhD, Delaware, 1980. DA8019944. N80-31477.
  4130. Ramon Briones Nonato
    Natural frequencies of a compressed delaminated composite plate
    MS, California State University Long Beach, 1993.  AAD1354664  MA32(2)656
  4131. G Nonhoff
    Beitrag zur stabilitatsrechnung und pruefung von zylinderschalen aus glasfaserverstarkten kunststoff unter gleichmassigem aussendruck
    [A contribution to equilibrium computation and testing of shells of glassfibre reinforced plastics under uniform external pressure]
    Dissertation, RWTH Aachen, 1972.
  4132. MJ Noone
    The preparation, structure and mechanical properties of fiamentary forms of silicon carbide
    PhD, Leeds, 1967.
  4133. MAH Noor
    The torsional characteristics of fibrous strands
    PhD, Leeds, 1987. D81257.
  4134. S Nor
    Realisation and study of finite elements for "Mindlin" shells
    DIng, UT Compiegne, 29 June 1978.
  4135. TR Nordahl
    Small molecule effects on craze initiation in polymer matrix composites
    Masters, Minnesota, 1985.
  4136. HA Nordby
    The load elongation properties of fabrics, with special reference to hysteresis
    PhD, Leeds, 1969!.
  4137. RA Nordstrom
    Limitations in quantification of acoustic emission from composites
    Masters, MIT, 1986.
  4138. Bert Norlin
    Two-layered composite beams with nonlinear connectors and geometry:  tests and theory
    TeknDr, Kungliga Tekniska Hogskolan - Sweden, 1993.  AADC371298  DAIC55(4)1284
  4139. TL Norman
    Transverse impact of stiffened laminated composite panels
    Masters, Purdue, 1986.
  4140. Timothy Lee Norman
    The controlled-damage concept in design of laminated composites
    PhD, Purdue, 1989. DA9008672. DAIB 50(11)5186.
  4141. LR Norpoth
    Processing parameters for the consolidation of thermoplastic composites
    MS, Georgia IT, 1988.
  4142. AH Norton
    Fabric deformation: a variational problem on a subspace of a Riemannian manifold
    PhD, Univ.New South Wales - Australia, 1987.
  4143. WJ Norton
    Design of an aeroelastic composite wing wind tunnel model
    Masters, AFIT, December 1987. AFIT/GAE/AA/87D-15. AD A188 855.
  4144. RG Norvell
    An investigation of damage accumulation in graphite/epoxy laminates
    Masters, TA&MU, August 1985.
  4145. Donald Scott Norwood
    An analysis of interlaminar stresses in unsymmetrically laminated plates
    PhD, VPI&SU, 1990. DA9116674. DAIB 52(1)366.
  4146. AV Nosarev
    Approximate methods in the theory of reinforced material and their application to structural design
    Doctorate, Tech.Sci.Moscow, 1973.
  4147. Asghar Nosier
    On vibration and stability problems of laminated plates and shells using shear deformation theories
    PhD, VPI&SU, 1991. DA9123744. DAIB 52(3)1682.
  4148. EW Nottorf
    Preliminary development of a constitutive model for metal matrix composites with damage
    Masters, TA&MU, 1985.
  4149. A Nottrott NTMC
    Untersuchungen zur Roentgendurchstrahlungsprufen von SMC-Teilen
    [X-ray radiation transmission study of SMC components]
    Studienarbeit (not dissertation), IKV Aachen, 1983.
  4150. Hossein Noureddini
    Kinematic analysis of epoxy resins: competing intermolecular and intramolecular polymerisation reactions
    PhD, Nebraska: Lincoln, 1991. DA9200147. DAIB 52(7)3762.
  4151. RC Novak
    Crack propagation studies in cross-linked polymers.
    Masters, MIT, 1966.
  4152. YuM Novichkov
    Theory of thin-walled shells and plates and its application
    Doctorate, Phys.Mech.Sci-Moscow, 1973.
  4153. RW Nowell
    Finite lateral deformation of thin elastic sheets reinforced with extensible cords
    PhD, Princeton, 1968. DA6902773.
  4154. Stephen Douglas Nunn
    Processing and properties of silicon carbide whisker reinforced silicon nitride ceramic matrix composites
    PhD, Michigan, 1991. DA9135660. DAIB 52(7)3845.
  4155. KS Numayr
    A finite element method for modelling edge effects in composite laminates
    PhD, S.California, 1987.
  4156. A-MK Nusayr
    On the stress analysis of an inhomogeneous transversely isotropic material
    PhD, Brown, 1969. DA7008770. N71-26406.
  4157. AW Nutt
    The effect of glass batch homogeneity upon glass properties
    Masters, Illinois, 1966.
  4158. SR Nutt
    Protective coatings for SiC filaments
    PhD, Virginia, 1982. DA8228597.
  4159. EE Nweke
    A Signorini model of bolt fastened laminated composites.
    PhD, Michigan, 1985. DA8512479. N86-11258.
  4160. AH Nye
    On the buckling of a reinforced rectangular plate
    Masters, Clarkson CT, 1971.
  4161. C Nyssen
    Finite element modelling for nonlinear load response in aerospace space structures
    Doctorate, Liege Aerospace Lab, 1979.
  4162. Y O
    Contribution a l'etude de la viscoelasticite des materiaux composites: verre/polyestere et carbone/epoxyde
    [Composite viscoelasticity: glass/polyester and carbon/epoxy]
    Thesis, INSA/Lyon I, 1984.
  4163. David Bomkyu O
    Perturbation solutions in 'Deuteron' for buckling, vibration and static loading of specially orthotropic plates
    PhD, RPI, 1989. DA8926588. DAIB 50(7)3112.
  4164. DC Oates
    An X-ray diffraction study of PAN-based carbon fibres
    PhD, Leeds, 1976!.
  4165. S Obadia
    Frittage de melanges Al2O3 et SiO2 gel pour moules de fonderie
    [Sintering of mixtures of alumina and silica gel for castings]
    Doctorate, EMP Evry, 1988.
  4166. CM O'Braidaigh
    Polymeric diaphragm forming of continuous fibre reinforced thermoplastics
    Masters, UC - Galway, 1987.
  4167. Conchur Mairtin O'Bradaigh
    Analysis and experiments in diaphragm forming of continuous fibre-reinforced thermoplastics
    PhD, Delaware, January 1991. DA9109911. DAIB 51(11)5543. CCM Report 90-22.
  4168. RE O'Brian
    A computer program which creates faired three-dimensional shapes is applied to yacht hull design
    Masters, MIT, 1984.
  4169. DA O'Brien
    Finite element stress analysis of idealised composite damage zones
    Masters, VPI&SU, 1978.
  4170. TK O'Brien
    A comparison of damage mechanisms to stiffness changes and strength reduction for boron epoxy plates subjected to fatigue loading
    Masters, VPI&SU, 1976.
  4171. TK O'Brien
    Evaluation of stiffness reduction as a damage parameter and criterion for fatigue failure in composite materials
    PhD, VPI&SU, 1978. DA7910486. N79-24063.
  4172. EF O'Brien
    Measurement of decomposition kinetics of polymer composites using a high-temperature high-heating-rate simultaneous thermal analyser
    Masters, Rhode Island, 1987.
  4173. Andreas Wolfgang Obst
    Thermal stresses in coatings on carbon-carbon composites
    PhD, Virginia Polytechnic Institute and State University, 1995.  AADAAI9529872DAB56(5)2813
  4174. OO Ochoa
    Transverse shear and normal stresses in laminated beams.
    PhD, TA&MU, 1980. DA8101628.
  4175. CM Ochoa
    Transverse shear and normal stresses in laminated plates.
    PhD, TA&MU, 1983. DA8408470.
  4176. J O'Connell
    Thermal and related characteristics of an asbestos reinforced rubber composite
    PhD, Salford, April 1982. D39653/82.
  4177. DG O'Conner
    Adhesive fracture considerations and the fracture toughness of a structural adhesive
    Masters, VPI&SU, 1980.
  4178. DJ O'Connor
    The flexural behaviour of sandwich beams with thick facings and rigid plastic foam cores
    DPhil, Ulster, February 1985.
  4179. EM Odom
    Design and fabrication of a motorcycle swingarm utilizing composite materials
    Masters, Wyoming, 1982.
  4180. B O'Donnell
    <Young's modulus variation in injection moulded glass fibre filled nylon 6,6>
    PhD, Newcastle-upon-Tyne, 1990.
  4181. EI Ofodile
    A study of deflection characteristics of filaments.
    Masters, Maine, 1966.
  4182. AA Ogale
    Elastic and viscoelastic properties of advanced thermoplastics and their short fibre composites
    PhD, Delaware, December 1986. DA8708710.
  4183. Charles Iroha Ogbonna
    Production of self-reinforced polyethylene using the multilive-feed injection moulding technique
    PhD, Brunel, 1989. DX93293. DAIB 52(6)3240.
  4184. TF Ogil'ko
    Shrinkage stresses in cylindrical glass reinforced plastic shells
    Dissertation, Riga, 1973.
  4185. Y Ogo
    The effect of stitching on in-plane and interlaminar properties of carbon-epoxy fabric laminates
    Masters, Delaware, May 1987.
  4186. O Ogunlari
    Static strength prediction of unidirectionally loaded composite laminates with unloaded notches
    MSc, RPI, December 1982.
  4187. SM Oh
    Effects of gases on E-glass fibres
    PhD, Iowa SU, 1975. DA7601864.
  4188. SY Oh
    Wetting of ceramic particulates with liquid metals
    PhD, MIT, 1987.
  4189. Donghoon Oh
    Vibration control and design of composite cantilevers taking into account structural uncertainties and damage
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9323788   DAIB54(4)2159
  4190. Jung Bae Oh
    An efficient method for designing quiet composite structures via material tailoring
    PhD, Pennsylvania State University, 1993.  AAD9334795  DAIB54(7)3818
  4191. Kyoyul Oh
    A theoretical and experimental study of modal interactions in metallic and laminated composite plates
    PhD, Virginia Polytechnic Institute and State University, 1994.  AADAAI9520759  DAB56(4)2283
  4192. H Ohnabe
    Flexural waves in anisotropic bars
    Masters, Delaware, 1971.
  4193. H Ohnabe
    Nonlinear deflections and large amplitude oscillations of thin plates and shallow shells made of certain special materials
    PhD, Delaware, 1975.
  4194. IO Ojikutu
    Stress singularities in laminated composite wedges
    PhD, Michigan, 1983. DA8314340.
  4195. Yoshio Okada
    The thermal expansion coefficient of polypropylene and related composites
    MEng, McGill University - Canada, 1992.  AADMM80500  MS32(1)341
  4196. DC O'Kain
    Some torsional properties of cotton fibres
    Masters, Tennessee, 1967.
  4197. BAA O'Kane
    Damage tolerance of aircraft structural composite materials
    PhD, Queens-Belfast, October 1984. D69753/86.
  4198. Dennis Duane Olcott
    Improved damping in composite structures through stress coupling, co-cured damping layers and segmented stiffness layers
    PhD, Brigham Young, 1992. DA9222816. DAIB 53(4)1944.
  4199. PP Oldyrev
    Examination of the deformation properties, energy dissipation and failure of rigid polymer materials in long-term cyclic loading
    PhD, Tech.Sci-Riga, 1968.
  4200. EF Oleinik
    Structure and properties of densely crosslinked polymers in the glassy state
    Doctorate, Chem.Sci-Moscow, 1980.
    >>> JED Oliveira, see JE De-Oliveira.
  4201. VE Oliver
    Failure criteria for layered composites
    PhD, VPI&SU, 1974. DA7511946.
  4202. DF Olsen
    Cracks and dislocation arrays in anisotropic bimaterial plates
    Masters, Delaware, 1972.
  4203. GC Olsen
    Degradation mechanisms in aluminium matrix composites: alumina/aluminium and boron/aluminium
    PhD, NCSU Raleigh, 1981. DA8209481.
  4204. WA Olson
    Analysis of residual stress in bars and tubes with circular cylindrical orthotropy
    Masters, Oklahoma, 1965.
  4205. LH Olson
    Energy methods in structural mechanics of textiles and application to fibre buckling
    PhD, UMIST, 1971!.
  4206. K-A Olsson
    Analysis of rigid cellular foams for sandwich constructions
    Licentiate, KTH Stockholm, 1973. In Swedish.
  4207. EF Olster
    Joining techniques for a metal matrix composite
    Masters, MIT, 1969.
  4208. EF Olster
    Toughening mechanisms in fibre reinforced metal matrix composites
    PhD, MIT, 1971.
  4209. PA O'Malley
    The application of the Ritz method to steady state torsional vibration of anisotropic bars of rectangular crosssection
    Masters, Marquette, 1970.
  4210. GO Omoike
    Fracture of laminated composite materials
    PhD, Michigan TU, 1984. DA8503819. N85-30030.
  4211. A Onal
    Design of composite driveshafts using numerical optimisation
    Masters, NPS Monterey, December 1981.
  4212. David Allen O'Neil
    Design and analysis of composite total hip replacement stems
    PhD, Cornell, 1989. DA9001384. DAIB 50(9)4186.
  4213. GS O'Neill
    Asymmetric reinforcements of a quasi-isotropic graphite epoxy plate containing a circular hole
    Masters, NPS Monterey, June 1982. AD A119 625. N83-14538.
  4214. JM O'Neill
    Thermoelastic stress analysis of anisotropic materials.
    PhD, Nottingham, May 1987. D74897/87. ASLIB 36(4)8746. PA88006721.
  4215. CL Ong
    Discontinuously bonded fibrous composites
    Masters, University of Washington-WA, 1975.
  4216. CK Ong
    Fibre reinforced concrete in marine environment
    Masters, New Brunswick, 1988.
  4217. CK Ong
    Characteristics of steel fibre reinforced polymer concrete and Portland cement concrete panels subjected to projectile impacts
    Masters, Texas @ Austin, 1988.
  4218. Y Onoya
    Properties of glass fibre reinforced polyethylene
    Masters, Illinois IT, 1976.
  4219. C Oprihory
    Aeroelastic considerations for the NASA composite glider
    Masters, RPI, 1977.
  4220. LJ Oresky
    Dynamic response of a fibreglass reinforced plate.
    Masters, UIUC, 1970.
  4221. PL Ormiston
    Compatibility studies in the carbon fibre/nickel system
    PhD, Southampton, 1975. D17228/76.
  4222. A Oropeza
    Transport in composite materials
    Masters, Minnesota, 1975.
  4223. MF O'Rourke
    Mechanical properties of glass fibre reinforced polyester resin pipes
    BE, Sydney-Australia, November 1982.
  4224. O Orringer
    Compressive behaviour of fibre composites
    PhD, MIT, 1972.
  4225. NJ Orth
    P-approximation axisymmetric shell elements for heat conduction in generally orthotropic and laminated composite materials
    Masters, Kansas, 1988.
  4226. Nilus J Orth
    P-version axisymmetric and three-dimensional curved shell elements for linear and nonlinear steady state heat conduction with isotropic, generally orthotropic and laminated composite material behavior
    PhD, University of Kansas, 1991.  AAD9238685  DAIB53(8)4303
  4227. Fabian James Orth
    Linear and geometrically nonlinear piecewise hierarchical P-version curved beam elements for laminated composites
    PhD, University of Kansas, 1992.   AAD9405778  DAIB54(9)4883
  4228. John Edward Orth
    The aqueous corrosion behavior of copper metal matrix composites
    PhD, University of Texas at Austin, 1993.  AAD9323515  DAIB54(4)2145
  4229. Belinda T Orzada
    Effects of fabric grain alignment on garment drape
    PhD, Florida State University, 1994.  AAD9434113  DAIB55(8)3269
  4230. PN Osgood
    Development of a finite element program for elastically non-linear anisotropic material undergoing large displacements & large strains
    Masters, Worchester PI, 1983.
  4231. Ricardo Osiroff
    Damorheology: creep-fatigue interaction in composite materials
    PhD, VPI&SU, 1990. DA9032496. DAIB 51(6)3078.
  4232. MY Osman
    Stresses and deflections in composite material beams.
    MPhil, Edinburgh, 1982.
  4233. Mahmoud Yassin Osman
    Analysis of rectangular composite plates and static lateral loading
    PhD, University of Lancaster, 1990.  AADDX98158  DAIB53(10)5412
  4234. Hocine Osmani
    Rupture des composites ceramique-ceramique a fibres
    [Fracture of silica fibre reinforced ceramic composites]
    DE, INSA Lyon, 1989. DA-C110327. DAIC 51(1)149.
  4235. E Osmont
    Proprietes de surface des fibres de verre et leur effet renforcant dans deux matrices thermoplastiques
    [Properties of glass fibre surfaces and their reinforcing effect in two thermoplastic matrices]
    Masters, Montreal, 1988.
  4236. MF Osselmann
    Experimental investigation of the non-linear behaviour of composite beams and plates
    Masters, Clarkson CT, 1986.
  4237. TA Osswald
    Numerical methods for compression mould filling simulation
    Doctorate, UIUC, 1986.
  4238. PM Ostaff
    The buckling of axisymmetric composite shells under axial compressive load
    Masters, Toronto, 1982.
  4239. J Ostrowski
    Internal stresses in unidirectional reinforced fibrous composites subjected to axial loading
    MASc, Toronto, 1980.
  4240. JU Otaigbe
    Nylon 6/glass fibre composites
    PhD, UMIST, June 1984. D76387. ASLIB 38(2)3323.
  4241. T Otani
    Corrosion behaviour of metal matrix composites
    PhD, Bath, 1988. DX83742. DAIB 49(10)4490.
  4242. Brendan John O'Toole
    Modelling the effects of heterogeneity in curved composite beams
    PhD, University of Delaware, 1992.  AAD9319069  DAIB54(3)1625
  4243. JD Ott
    Modelling of chemorheology of an amine-epoxy system of the type used in advanced composites
    Masters, PI Brooklyn, 1988.
  4244. M Otto
    Einfluss des Alterungszustandes von Prepregmaterialen auf die Qualitaet von Faserverbundbauteilen
    Experimental thesis, IKV Aachen, 1990.
  4245. Rabah Ouadi
    Conception d'un panneau sandwich isolant-porteur
    [Development of a new type of structural insulating sandwich panel]
    Doctorate, INSA Lyon, 1991. DA-C184434. DAIC 52(3)468.
  4246. P Ouellette
    Buckling of glass-reinforced plastic filament wound pressure vessels under hydrostatic external pressure
    MEng, Concordia, September 1985.
    >>> M Oulad Bouyahya Idrissi, see MOB Idrissi.
  4247. H Ouriche
    Analyses dynamiques des coques coniques anisotropies
    [Dynamic analysis of anisotropic conical shells]
    Masters, Montreal, 1984.
  4248. Mohamed Ouddane
    Fabrication and mechanical properties of fibreglass/thermoplastic sandwich structures
    Fabrication et proprietes mechaniques de structures sandwich thermoplastiques/fibre de verre
    MScA, Ecole Polytechnique Montreal - Canada, 1993.  AADMM86497  MA32(5)1463.
    >>> Ouyang Tong, see O Tong.
  4249. Timothy Christopher Ovaert
    Effect of surface topography on the wear of polyetheretherketone and polyetheretherketone/carbon fibre composite
    PhD, NWU, 1989. DA9009678. DAIB 50(11)5278.
  4250. GI Ovchinnikova
    Study of physicochemical phenomena in reinforcement of synthetic resins with chemical fibres
    Dissertation, Kiev, 1976.
  4251. Mary Kristine Overland
    The environmental resistance of three orthopedic composite materials conditioned in an in-vitro lipid environment
    PhD, Arizona State University, 1993.  AAD9320643  DAIB54(3)1608.
    >>> M van Overmeire, see M Van-Overmeire.
  4252. MJ Overy
    Thermal expansion properties of carbon fibre reinforced plastics
    PhD, Salford, 1975. D15226/76.
  4253. AB Owen
    The fracture toughness of brittle matrix particulate composites
    PhD, Cambridge, 1979. D34157/81.
  4254. ME Owens
    Finite element analysis of composite plates including shear deformation
    Masters, AFIT @ WPAFB, 1988.
  4255. RP Owings
    Tensile test for rectangular graphite specimens
    Masters, West Virginia, 1967.
  4256. SH Own
    The effects of surface modification on the thermal oxidation of carbon fibres
    Masters, Washington SU, 1982.
  4257. S-H Own
    A statistical theory of interfacial shear strength distribution and its applications to carbon fibre reinforced polymer composites
    PhD, Washington SU, 1984. DA8423009.
  4258. Akyempem Osei Owusu
    Structural, thermal and rheological characterization of bisphenol A-based cyanate ester resin systems
    PhD, Syracuse University, 1992.  AAD9312583  DAIB53(12)6332
  4259. M Oxley
    The fatigue behaviour of carbon fibre-reinforced plastics for aerospace applications
    MPhil, Sheffield, 1986. ASLIB 37(3) 6037.
  4260. M Oxley
    The effect of low velocity impact damage on the performance of a woven CFRP
    PhD, Sheffield, 1989.
  4261. SO Oyadiji
    Vibration transmissibility characteristics of reinforced flexible pipes
    PhD, Manchester, 1983.
  4262. GA Oyibo
    Use of affine transformations in analysis of stability and vibrations of orthotropic plates
    PhD, RPI, 17 April 1981.
  4263. Feridun Ozdil
    Mode I interlaminar fracture toughness of interleaved graphite/epoxy
    MS, Florida Atlantic, 1991. MA1342945. MA29(3)485.
  4264. VI Ozerov
    <rheology of resins>
    Dissertation, Kiev, 1966.
  4265. F Ozgul
    An investigation into ply detection methods for automated handling of textiles
    MPhil, Leeds, April 1985. D77699.
  4266. V Ozsanlav
    Mechanical properties of bonded fibre fabrics.
    PhD, UMIST, 1971.
  4267. Abdullah Ozturk
    The mechanical properties of tightly woven carbon-carbon composites
    PhD, Missouri: Rolla, 1991. DA9133829. DAIB 52(6)3240.
  4268. AH Pacella
    A penny-shaped crack in a filament reinforced matrix.
    PhD, Lehigh, 1970. DA7110525.
  4269. S Pack
    Finite element analysis of fibrous composite materials.
    Masters, Syracuse, 1979.
  4270. SC Pack
    Multiplane finite element method: applications to fibre reinforced material
    PhD, Syracuse, 1982. DA8310466.
  4271. Sanjay Padaki
    Powder processing of composite prepreg tape:  particle size effects
    MS, Michigan State University, 1992.  AAD1349077  MA31(1)368
  4272. HS Padgett
    Properties of synthetic fibres at high strain rates.
    Masters, Georgia IT, 1973.
  4273. Gopalkrishna Padmanabhan
    Fade, wear and fracture behavior of phenolic-based non-asbestos friction composites
    PhD, University of Missouri - Rolla, 1994.  AAD9507448  DAIB55(10)4571
  4274. Perng-Jin Frank Pai
    Nonlinear flexural-flexural-torsional dynamics of metallic and composite beams
    PhD, VPI&SU, 1990. DA9028074. DAIB 51(7)3448.
  4275. Hyung-Joon Paik
    In situ characterization of epoxies and composites via fiberoptic fluorescence
    PhD, Tufts University, 1995.  AADAAI9531440  DAB56(5)2754
  4276. R Pailler
    Les materiaux composites fibres de bore-titane.Essai de correlation entre interactions chimique fibres-matrice et caracter mecanique
    [Boron fibre/titanium composite materials. Study of correlation of fibre-matrix chemical interaction and mechanical characteristics]
    DEtatSci, Bordeaux-I, 10 April 1979. Thesis #616.
  4277. Jeffrey Steven Nelson Paine
    Multi-functional SMA hybrid composite materials and their applications
    PhD, Virginia Polytechnic Institute and State University, 1994.  AADAAI9520760 DAB56(2)1059
  4278. SA Paipetis
    Dynamic properties of viscoelastic composites.
    PhD, London, 1970.
  4279. PK Pal
    Investigation of jute fibres as a reinforcement for plastics
    MPhil, Brunel, 1989. ASLIB 39(2)4668.
  4280. TR Palamides
    Characterisation study of crack behaviour in ceramic matrix composites using a double cleavage drilled compression specimen
    Masters, Drexel, 1987.
  4281. RF Palardy
    The buckling and vibration of composite plates using the Levy method considering shear deformation and rotary inertia
    Masters, AFIT, 1987.
  4282. J Paletto
    Etude de la permittivite dielectrique de materiaux composites
    [Study of dielectric permittivity of composite materials]
    DSciPhys, Claude Bernard-Lyon, 1972. AO-CNRS-7950. Pascal 173341509
  4283. CP Palmer
    Strength criteria for composite materials
    Masters, Toronto, 1974.
  4284. David William Palmer
    The effect of internal delamination on unsymmetric laminated composite plates
    PhD, Georgia Institute of Technology, 1995.  AADAAI9536999  DAB56(b)3869 87654321
  4285. Ariovaldo Felix Palmerio
    On a moderate rotation theory for anisotropic shells
    PhD, VPI&SU, 1988. DA8901941. DAIB 49(10)4400.
  4286. Giuseppe Raffaello Palmese
    Origin and influence of interphase material property gradients in thermosetting composites
    PhD, University of Delaware, 1991.  AAD9223705  DAIB53(5)2436
  4287. YC Pan
    Green's functions for transversely isotropic materials and their applications in defect theories
    PhD, Delaware, 1977.
  4288. T-Y Pan
    Fractographic study of fibre composites
    PhD, Michigan, 1987. DA8712188.
  4289. Yi-Ming Pan
    Tribology of aluminium based metal-matrix composites: fundamental study of wear behaviour as influenced by microstructure
    PhD, NWU, 1990. DA9114612. DAIB 51(12)6053.
  4290. Huang-Hsing Pan
    A class of inclusion problems for the strengthening of brittle and ductile composites
    PhD, Rutgers University: State University of New Jersey at New Brunswick, 1992.  AAD9321318  DAIB54(3)1625
  4291. AV Panajott
    Statische und Konstruktive Untersuchungen zu thermisch beanspruchten Rotorblattern von Drehfluglern
    [Static and structural study of thermally loaded blade for a rotary wing]
    Diplomarbeit, FH Munchen, April 1984.
  4292. SC Pancholi
    Investigation of bending of elliptical sandwich plates.
    Masters, NCSU, 1968.
  4293. AK Pandey
    A nonlinear computational model for the strength and failure of composite plates and shells
    PhD, VPI&SU, 1987. DA8723928.
  4294. Mahesh D Pandey
    Structure-material interaction in stability of fibrous composite elements
    PhD, University of Waterloo - Canada, 1991.  AADNN72445  DAIB53(11)5872
  4295. SN Pandit
    Mechanical properties of unreinforced and short glass fibre-reinforced polypropylene
    PhD, IIT-New Delhi, May 1980.
  4296. Thomas H Pang
    Forced Rayleigh scattering studies of bulk polymer systems above and below the glass transition temperature
    PhD, Southern California, 1989. DA-567376. DAIB 50(11)5097.
  4297. Sheh Fatt Pang
    Recycling of scrap APC-2
    MSc, Manchester Materials Science Centre, 1992.
  4298. Adriano Birosel Pangelinan
    Surface induced molecular weight segregation in thermoplastic composites
    PhD, Delaware, 1991. DA9206360. DAIB 52(9)4925.
  4299. RA Panora
    Composite flywheels for energy storage
    Masters, Tufts, 1978
  4300. LE Panton
    Nonstationary resonance of a nonlinear orthotropic plate.
    Masters, Syracuse, 1971.
  4301. G Papageorgiou
    Studies in resin-fibre adhesion
    PhD, Leeds, June 1982. D77545.
  4302. SG Papaioannou
    A finite element method for calculating stress intensity factors and it's application to composites
    Masters, Lehigh, 1972.
  4303. C Papaspyrides
    Unsaturated polyester resin technology: possible improvement in hydrolysis resistance
    MSc, Loughborough, July 1977.
  4304. N Papathanassis
    Spectrum fatigue loading of graphite epoxy (AS1/3501/6) composite laminates
    Masters, Toronto, 1986.
  4305. William Patrick Paplham
    Environmental stability of high temperature polymeric matrix composites
    PhD, University of Washington, 1995.  AADAAI9537345  DAB56(7)3893
  4306. Marie-Claude Paquet
    Effets de facteurs environnementaux sur le comportement a la rupture de composites a matrice polymere
    MScA, Ecole Polytechnique, Montreal, 1995.  AADAAIMM97124  MA33(6)1958
  4307. SJ Paradis
    Design and implementation of an on-line measurement device for the determination of fibre orientation in paper
    Masters, MIT, 1986.
  4308. JW Parcells
    Electrochemical oxidation of NADH at composite graphite electrodes
    Masters, Virginia, 1985.
  4309. WT Parckard
    The stress-strain relations for a nonhomogeneous composite with a circular hole
    Masters, GWU, 1970.
  4310. GF Pareis
    Analysis of residual stress in metal matrix composite
    Masters, RPI, 1988.
  4311. VM Parfeev
    Damage accumulation in certain rigid polymer materials under steady and nonsteady cyclic flexure
    Dissertation, Tech.Sci-Riga, 1978.
  4312. S Parhizgar
    Fracture mechanics of unidirectional composite material
    PhD, Iowa SU, May 1979. DA8000164. N80-17146.
  4313. SC Park
    Multiplane finite element method: application to fibre reinforced material
    PhD, Syracuse, 1982. DA8310466. N84-12261.
  4314. CS Park
    Optimum design of stiffened plates using the finite element method
    Masters, NPS Monterey, March 1983. AD A128 556. N83-32110.
  4315. YH Park
    Influence of interface degradation by environments of the thermal and fracture fatigue properties of titanium/continuous fibre composites
    PhD, Texas @ Austin, 1983. DA8319657.
  4316. H Park
    Sound velocity anisotropy in cubic, hexagonal and trigonal crystals
    Masters, Howard, 1984.
  4317. HC Park
    Analytical and experimental study on micropolar elastic behaviour in composite material
    PhD, Iowa, 1985. DA8527992. N86-25427.
  4318. SH Park
    Mechanical properties of silane treated glass fibre filled bis-GMA composite
    Masters, Clemson, 1985.
  4319. H Park
    Fracture of ultra-high modulus graphite epoxy
    Masters, MIT, 1986.
  4320. K-B Park
    Temperature dependent mechanical properties of an alumina fibre reinforced aluminium composite
    PhD, Delaware, 1987. DA8719545.
  4321. JS Park
    Experimental and theoretical studies on the interlaminar shear strength of graphite/epoxy composites exposed to ionising radiation
    PhD, NCSU, March 1988. DA8815530.
  4322. SY Park
    Chemically derived near-net-shape ceramic-ceramic composites
    Masters, Clemson, 1988.
  4323. Kyung Shin Park
    The solid particle erosive wear of discontinuous silicon carbide reinforced aluminium alloys
    MS, Texas @ Arlington, 1989. MA1337512. MA 28(1)153.
  4324. Hun Sub Park
    Residual stress measurements and microstructural characterization of graphite-aluminium metal matrix composites
    PhD, Texas @ Austin, 1989. DA9016948. DAIB 51(2)931.
  4325. Ho Sung Park
    Fundamental studies on processing, characterisation and properties of poly-p-phenyleneterephthalamide/polyamide molecular and particulate composites
    PhD, Akron, 1990. DA9004256. DAIB 50(9)4171.
  4326. Myung-Kyun Park
    Stress analysis of a double-doubler joint in composite structure
    PhD, Florida, 1990. DA9106461. DAIB 51(10)4916.
  4327. Heeyong Park
    A study of laser-generated Rayleigh and Lamb waves in graphite/epoxy composites
    PhD, Oregon SU, 1991. DA9220512. DAIB 53(2)1031.
  4328. Kyung-Tae Park
    High-temperature creep deformation in discontinuously reinforced metal matrix composites
    PhD, University of California - Irvine, 1992.  AAD9233689  DAIB53(7)3713
  4329. Yong Hwan Park
    Tensile creep and creep-recovery behavior of fiber-reinforced ceramic matrix composites
    PhD, University of Michigan, 1992.  AAD9226981  DAIB53(5)2508
  4330. Byung Dae Park
    Effects of impact modifiers on the mechancial properties of wood-fibre polypropylene composites
    MSc, University of Toronto, 1993.  AADMM83430  MA32(2)700
  4331. Amol Prabhakar Parkar
    Glass fiber length degradation in the feed zone of an injection molding screw
    MSEng, University of Massachusetts - Lowell, 1993.  AAD1354389  MA32(2)718
  4332. SFH Parker
    Thermoelastic properties of carbon fibre reinforced plastics
    PhD, Salford, 1980.
  4333. Douglas Scott Parker
    Factors influencing the mode I interlaminar fracture resistance of toughened matrix composites
    PhD, Michigan, 1989. DA9013986. DAIB 51(1)378.
  4334. BG Parks
    The influence of loading history on the fracture toughness of short fibre composites
    Masters, Delaware-Civil Eng, 1987.
  4335. Adrian Timothy Parkyn
    Residual stresses in laminated thermoplastic matrix composites
    PhD, Reading, May 1988. DX86647. DAIB 50(8)3647. ASLIB 38(3)6231.
  4336. S Parlinzgar
    Fracture mechanics of unidirectional composite materials
    PhD, Iowa SU, May 1979.
  4337. Kemal Levend Parnas
    Failure mechanisms and prediction in advanced composite materials
    PhD, Georgia IT, 1990. DA9124541. DAIB 52(3)1567.
  4338. TR Parnett
    An experimental and analytical evaluation of a biaxial test for determining shear properties of composite materials
    MS, Clemson, 1988.
  4339. TV Parry
    Selective reinforcement of aluminium alloys by carbon fibre epoxide composites
    PhD, Bradford, 1980. D33205/80.
  4340. Fariborz Parsi
    Flow and curing-induced fibre orientation in short-fibre composites
    PhD, South Carolina, 1990. DA9101484. DAIB 51(8)3964.
  4341. FE Partner
    Investigation of the elastic buckling loads of slender sandwich columns
    Masters, Ohio SU, 1965.
  4342. IK Partridge
    Effects of phase separation in crosslinked resins containing polymeric modifiers
    PhD, Cranfield IT, March 1984. D54085/85.
  4343. VV Partsevskii
    On the mechanism of transfer of forces in layered media
    Dissertation, Tech.Sci-Moscow, 1969.
  4344. A-D Parvizi
    Transverse cracking in glass fibre reinforced plastic laminates
    PhD, Surrey, 1978. D26409/79.
  4345. G Pasa
    Contributii la studiul mediilor periodice cu ajutorul metodei omogenizarii
    [Contribution to study of periodic media by homogenisation method]
    Doctorate, Bucharest, 1983.
  4346. Arun Pasricha
    Prediction and measurement of the long term mechanical behavior of polymeric composites
    PhD, University of Washington, 1994.  AAD9504672  DAIB55(9)4079
  4347. L Passeck
    Kernkonstruktion fur rechnergerstutz Wickelsteuerdatenermittlung
    Graduate thesis, IKV Aachen, in preparation 1986/87.
  4348. AV Pastukhov
    The prediction of physical characteristics and preparation of viscoelastic epoxy polymers for the polarisation-optical method of investigation of stresses
    Dissertation, Moscow, 1985.
  4349. PD Patel
    The effect of molecular orientation on the mechanical properties of fibre filled amorphous polymers
    Masters, Tennessee @ Knoxville, 1980.
  4350. Hina K Patel
    Effect of design and process variables on the mechanical behavior of long glass fiber reinforced PC/ABS blends
    MSEng, University of Massachusetts, 1994.  AADAAI1360380  MA33(4)1337
  4351. Nirajkumar Patel
    Micro-scale flow behavior, fiber wetting and void formation in liquid composite molding
    PhD, Ohio State University, 1994.  AADAAI9517063  DAB56(3)1575
  4352. AL Patra
    An experimental study of deposition of chrysotile asbestos in human lung model
    PhD, NCSU Raleigh, 1979. DA7923061.
  4353. N Patsalides
    Bending of inhomogeneous orthotropic curved panels.
    Masters, Rhode Island, 1977.
  4354. GP Patterson
    Injection moulding of polymers and composites
    Masters, Tennessee @ Knoxville, 1973.
  4355. WG Patterson
    Impact and fatigue of graphite/epoxy laminates
    Masters, Delaware, 1983.
  4356. J Patterson
    Fracture toughness of stoichiometric epoxy networks containing pre-reacting epoxy oligomers
    Masters, Akron, 1987.
  4357. William George Patterson
    Thermal cycling of silicon carbide whisker/aluminum alloy composite
    PhD, Delaware, 1988. DA8824198. DAIB 49(8)3386.
  4358. Jocelyn Margaret Patterson
    Composite cylinders and cylindrical segments subjected to hygrothermal and mechanical loads
    PhD, Stanford University, 1992.  AAD9302291  DAIB53(9)4910
  4359. Forrest T Patterson
    Theoretical analysis of small crack growth in fiber-reinforced ceramic composite materials
    PhD, Massachusetts Institute of Technology, 1994.  AAD0575148  DAIB55(6)2367
  4360. KT Paul
    Rheological and curing characteristics of thermosetting plastics as related to injection moulding
    PhD, Aston, 1976. D19217/xx.
  4361. JS Paul
    A study of the vibrational characteristics of thin, imperfect orthotropic plates
    PhD, CNAA: Paisley CT & NEL, November 1985. D66370/86.
  4362. C Paul
    Mechanical behaviour of polyester and epoxy polymers and polymer concrete systems
    Masters, Houston, 1988.
  4363. JS Paulsen
    Impact wave propagation in two dimensional nonhomogenous orthotropic elastic solids
    Masters, Boston, 1972.
  4364. NJ Pavicic
    A dynamical theory of sandwich plates with anisotropic facings
    Masters, Pennsylvania SU, 1968.
  4365. Andrew Fabian Pawlowicz
    Braidtrusion, a method for continuous formation of braid reinforced thermoplastic structural members
    MSEng, University of Massachusetts - Lowell, 1994.  AAD1357852  MA33(1)253
  4366. N Paydar
    Stress analysis of variable thickness sandwich plates of rectangular planform
    PhD, Syracuse, 1985.
  4367. SA Paydarfar
    An orthotropic thermoelastic finite element with applications to thermally induced waves
    Masters, Purdue, 1982.
  4368. KR Payne
    Stresses induced by roller contact in laminated beams
    MPhil, Surrey, 1987. ASLIB 39(1)1958.
  4369. TRA Pearce
    The stability of simply-supported sandwich panels with fibre reinforced face-plates
    PhD, Bristol, September 1973. N76-24633.
  4370. KJ Pearsall
    The effect of sliding time and speed on the wear of composite materials
    Masters, Texas @ Austin, 1979.
  4371. MJ Pearse and ODV Richards
    Structural analysis and design of a wheelchair using finite element method
    BSc, Bristol, June 1986. BU-348. ETN-87-99210. N87-19782.
  4372. Andrew Eugene Pearson
    Capabilities of compression test methods for evaluating unidirectional carbon fibre reinforced composites
    MS, San Jose SU, 1990. MA1341694. MA 29(2)312.
  4373. Raymond Albert Pearson
    Sources of toughness in modified epoxies
    PhD, Michigan, 1990. DA9034495. DAIB 51(7)3527.
  4374. Scott Owen Peck
    Compression behaviour of delaminated composite plates
    PhD, Stanford, 1989. DA9011552. DAIB 50(12)5843.
  4375. Ann W Peck
    Design and analysis of curved composite components for rotorcraft fuselage frames
    PhD, Rensselaer Polytechnic Institute, 1992.  AAD9302698  DAIB53(9)4910
  4376. WB Peirce
    A macroscopic, microscopic and gross property evaluation of representative samples of cordage made from natural and synthetic fibres
    Masters, Worchester PI, 1965.
  4377. S-J Peng
    Vibration of generally orthotropic plate with simply supported edges
    Masters, Northeastern, 1971.
  4378. Chien-Ming Peng
    Nucleophilic bonding of amines to carbon fiber surfaces to improve and control the adhesion of composites
    PhD, University of Wyoming, 1995.  AADAAI9540152  DAB56(8)4287
  4379. D Pennington
    Fibre degradation in polyester moulding compounds
    PhD, Liverpool, February 1979.
  4380. RA Penty
    Behaviour of fibre reinforced ceramic composites
    Masters, Cornell, 1969.
  4381. Dean Frederick Peoth
    The development of the methodology for the optimization of neutron opaque penetrants for use in the evaluation of manufacturing damage in monolithic and composite materials
    PhD, Pennsylvania State University, 1993.  AAD9326926  DAB54(5)2685.
  4382. Patrick Peres
    Analyse theorique et experimentale du role des parametres de microstructure sur le comportement des composites a matrice fragile
    [Theoretical and experimental study of the influence of microstructure parameters on stressed brittle matrix composites]
    Doctorate, INSA Lyon, 1988. DA-C58615. DAIC 50(1)139.
  4383. D Peretz
    Crack propagation in polymeric composites
    DSc, Washington University-MO, 1971. DA7217973.
  4384. RJ Perez
    A review of commercial epoxy resin curing agents
    Masters, PINY Brooklyn, 1967.
  4385. Jose Luis Perez Aparicio
    An integrated micro-macromechanics analysis of progressive failure in cross-ply composite laminates
    PhD, Stanford University, 1992.  AAD9302293  DAIB53(9)4910
  4386. Elaine Ann Perkins
    An investigation of defect formation and growth in epoxy resin using light scattering methods
    PhD, CNAA: City of London Poly, July 1989. DX87724. DAIB 50(10)4714
  4387. E Perl
    Analysis of orthotropic materials using the finite element method.
    Masters, Northeastern, 1972.
  4388. F Permanyer
    Viscoelastic behaviour of fibrous materials with special reference to torsional relaxation. 1: Theoretical aspects. 2: Experimental investigations
    PhD, Manchester, 1947.
  4389. V Peros
    Thick-walled composite material pressure hulls: three-dimensional laminate analysis considerations
    Masters, Delaware, 1987.
  4390. FJ Perrett
    Computer simulation of flow, reaction and heat transfer in reaction injection moulding
    Masters, Louisiana SU, 1988.
  4391. Thomas George Perry
    Laminate optimization of advanced composite cylindrical shells to improve buckling characteristics under external pressure
    MSEng, University of Lowell, 1992.  AAD1347889  MA30(4)1462
  4392. Mark Joseph Perry
    Analysis of resin transfer molding: material characterization, molding and simulation
    PhD, Ohio State University, 1993.  AAD9412039  DAIB54(11)5816
  4393. P Perugini
    Applicazione ed estenzione a strutture di forma generica del processo di filament winding
    [Generic structural forms for processing by filament winding]
    MSc Aero Eng, Rome: La Sapienza, 1990. In Italian.
  4394. Tasneem Pervez
    Transient dynamic, damping and an elasto-plastic analysis of anisotropic laminated composite plates using a refined plate theory
    PhD, Minnesota, 1991. DA9134532. DAIB 52(6)3256.
  4395. CS Pessoa
    Mechanical properties of laminated composites of Al1100/Al2024 in three aging states
    MSc, Instituto Militar de Engenharia-Rio de Janeiro-Brazil, 1984. In Portugese. INIS-BR-546. DE87700417.
  4396. RJ Petcavich
    Fourier transform infrared spectroscopic studies on thermal degradation of polyacrylonitrile
    Masters, Pennsylvania SU, 1977.
  4397. PWM Peters
    The influence of notch length and ligament length on the toughness of boron-fibre reinforced aluminium
    PhD, TH-Aachen, July 1981. DFVL-FB-81-22. N82-17270.
  4398. James Carl Peters
    Microcrack formation in a carbon/epoxy cross-ply laminate
    MS, Texas @ Arlington, 1991. MA1347242. MA 30(3)868.
  4399. BR Peterson
    Finite element analysis of composite plate impacted by a projectile
    PhD, Florida, 1985. DA8606751. N87-11843.
  4400. MH Petit
    Flexural properties of full-size wood composite panels evaluated by stress wave speed and attenuation
    Masters, Washington SU, 1986.
  4401. Y le Petitcorps
    Caracterisations physico-chimique et mecanique des filaments CVD de carbure de silicium ou de bore. Application au materiaux composites
    1-D SiC/Ti-6Al-4V
  4402. [Physicochemical and mechanical characterisation of CVD SiC and B filaments. Use in unidirectional metal matrix composite materials]
    Doctorat #22, Bordeaux I, 1985.
  4403. MS Petraitis
    Stress wave propagation in random particulate composites
    Masters, Colorado @ Boulder, 1978.
  4404. DM Petridis
    Composite service life prediction via fibre bundle testing. evaluation of testing equipment and data acquisition system
    Masters, NPS Monterey, December 1986. AD A176 835. N87-21365.
  4405. SS Petrov
    Investigation into controlling the structure and properties of [DGEBA?] phenolic based resins
    PhD, Moscow, 1979.
  4406. DR Petterson
    On the mechanics of non-woven fabrics
    Sc.D, MIT, August 1958.
  4407. M Peuker-Holtermann
    Zum Festigkeits- und Verformungsverhalten unidirectional cordverstaerkter Elastomere
    [Strength and deformation of unidirectional cord reinforced elastomers]
    Dissertation, RWTH Aachen, 1981. DS8109.
  4408. JT Peussa
    Elevated temperature fracture properties of CVI silicon carbide matrix continuous ceramic fibre composites
    Masters, University of Washington-WA, 1987.
    >>> Pey Min Wung, see PM Wung
  4409. NA Peygahi
    Burst pressures over strain distributions for filament-wound glass-reinforced plastic tubes with openings
    MSc, Manchester, 1978.
  4410. HQ Pham
    Dielectric studies of water absorbed in epoxies
    Masters, TA&MU, 1987.
  4411. A Pham Dunag Tuang
    Theorie des plaques sandwiches elastiques anisotropes
    [Theory of anisotropic sandwich plates]
    DIng, UT Compiegne, 16 September 1976.
  4412. WD Phan
    Linear analysis of laminated composite plates using higher order shear deformation theory
    Masters, VPI&SU, 1984.
  4413. C Phang
    Elastic analysis of responsive anisotropic beams to transverse shearing
    DIng, UT Compiegne, March 1979.
  4414. KW Phang
    Fracture properties of short glass fibre reinforced nylon 6,6 composites
    PhD, UMIST, December 1981. D73125/87.
  4415. C Phanopoulos
    The nature of bond formation and failure in wood-adhesive systems
    PhD, CNAA: Leicester, 1987.
  4416. HR Phelps
    Effects of nonionising space environmental parameters on graphite/epoxy composites
    Masters, GWU, August 1979.
  4417. TP Philippidis
    Generalised failure criteria of initially anisotropic elastic media with special emphasis on composite materials
    PhD, NTU Athens, 1989.
  4418. Mahera Shehata Philobos
    Benchmark elasticity solution for the buckling of thick composite cylindrical shells under axial compression and combined external pressure and axial compression
    PhD, Georgia Institute of Technology, 1994.  AADAAI9511604  DAB55(2)5419
  4419. EM Philofsky
    Specification and measurement of line and boundary anisotropy
    Masters, NWU, 1966.
  4420. RW Phippen
    A computer simulation study of anisotropic molecular models
    PhD, Southampton, 1988. DX84527. ASLIB 38(3)5322.
  4421. SL Phoenix
    Probabilistic strength analysis of fibres and fibre bundles
    PhD, Cornell, 1972. DA7306665. Mat.Sci.Ctr.Rpt.1873.
  4422. S Piccarolo
    Molecular composite prediction of strength for Semicrystalline polymers
    MS, Washington University-MO, 1977.
  4423. AK Pickett
    Stress analysis of adhesive bonded lap joints
    PhD, Surrey, 1983.
  4424. DH Pickett and PD Sullivan
    Analysis of symmetric reinforcement of quasi-isotropic graphite epoxy plates with circular cutout under uniaxial tensile loading
    Masters, NPS Monterey, December 1983. AD A139 998. N84-24715.
  4425. Ramana Murthy V Pidaparti
    Modelling and fracture prediction in rubber composites
    PhD, Purdue, 1989. DA9201426. DAIB 52(7)3732.
  4426. C Pideri
    Materiaux composite elastiques: comparison de quelques methodes d'homogenisation
    [Comparison of homogenisation methods for elastic composites]
    Thesis, Paris: P&M Curie, 1987.
  4427. K Piekarski
    Studies on the mechanical properties of bone
    PhD, Cambridge, 1968-69.
  4428. John Edward Pietruszewski
    An inquiry into the suitability of abrasive belt machining of composite materials in an aeroballistic application
    MMSE, Coll.of St Thomas (St Paul MN), 1990. DA1340661. MA 28(4)629.
  4429. W Pigg
    The fibre reinforcement of low density rigid polyurethane foam
    PhD, CNAA: Manchester, July 1986. D71178/87. ASLIB 37(3)6039.
  4430. NT Pike
    Viscoelastic properties of model fibre filled elastomers.
    PhD, CNAA, 1976!.
  4431. S Pilitsis
    Calculations of steady-state viscoelastic flow in a periodically constricted tube
    PhD, University of Delaware, 1989
  4432. Vikram K Pillai
    Use of simulations in optimizations of, and design of a knowledge-based control system for a composite manufacturing process
    PhD, University of Delaware, 1993.  AAD9419496  DAIB55(3)1047
  4433. DW Pillasch
    Use of large time increments in the integration of nonlinear dynamic equations for flat laminated plates
    Masters, UIUC, 1977.
  4434. DW Pillasch
    Finite element analysis of dynamically loaded flat laminated plate
    PhD, UIUC, 1979. DA8009131.
  4435. MW Pilling
    Thermal conductivity studies on carbon fibre reinforced composites
    PhD, Salford, 1977. D20462/77.
  4436. DJ Pinchin
    Pyrolytic surface treatment of graphite fibres for improved composite shear strength
    MASc, Toronto, 1972.
  4437. M-J Pindera
    An endochronic theory for transversely isotropic fibre composites
    PhD, VPI&SU, 1981. DA8206772.
  4438. M de FF Pinheiro
    Thermal properties of composite materials
    DPhil, Oxford, 1978. D27930/79.
  4439. Marco Antonio Santos Pinheiro
    Finite elements for free edge delaminations and delaminated anisotropic beams
    PhD, Florida, 1991. DA9219229. DAIB 53(2)926.
  4440. GE Pintelas
    Reduction of stress concentrations around holes in fibre reinforced plastics
    MSc, Cranfield IT, 1979.
  4441. EJ Pinto
    Thermal analysis of multilayer structures
    Masters, MIT, 1984
  4442. Sunil Praveen Pinto
    Investigation of the effects of processing parameters, moisture, regrind and heat aging on the physical properties of 15% glass reinforced polybutylene terephthalate
    MS, University of Massachusetts, 1995.  AADAAI1361551  MA33(5)1584
  4443. WJ Piotrowski
    Fabrication & testing of oriented short fibre reinforced composites
    Masters, McGill, 1975.
  4444. RB Pipes
    Solution of certain problems in the theory of elasticity for laminated anisotropic systems
    PhD, Texas @ Arlington, March 1972
  4445. DG Pires
    Fibre/matrix interaction effects on the fracture toughness of structural composites
    Masters, MIT, 1973.
  4446. RM Pisipati
    Rheological characterisation of particle and fibre filled nylon 6,6 melts and it's application to weld line formation in moulded parts
    PhD, VPI&SU, 1983.
  4447. VG Piskunov
    The non-classical theory in problems of dynamics and statics of laminated shells and plates
    Doctorate, Moscow, 1980.
  4448. Rangarajan Pitchumani
    Modeling the thermal properties and processing of composite materials
    PhD, Carnegie-Mellon University, 1992.  AAD9238826  DAIB53(8)4330
  4449. MJ Pitkethly
    The strength of hybrid composites.
    PhD, Surrey, February 1987. DX74605/87. ASLIB 39(1)1946.
  4450. RE Pitt
    The statistical strength of fibrous materials as influenced by fibre load-sharing and geometric configuration
    PhD, Cornell, 1980. DA8015720. N80-27427.
  4451. S Pitteri
    Processing and evaluation of filled thermoplastics
    PhD, Brunel, December 1989. DX 91498.
  4452. E Plati
    Application of fracture mechanics to impact behaviour of polymers
    PhD, London: ICST&M, 1975. D16357/76.
  4453. GS Plemper
    An investigation into the effects of chemical and physical nature and concentration of fillers on the burning behaviour of plastics
    PhD, CNAA: South London/QMC IRL, 1983.
  4454. JH Plenger
    Tensile and charpy impact testing of unidirectional composite materials
    MS, Wyoming, December 1975.
  4455. Anthony Raymond Plepys
    A study of residual stress formation in three-dimensionally constrained epoxy resins
    PhD, University of Massachusetts, 1992.  AAD9233133  DAIB53(6)3139
  4456. Nikolaos Plevris
    Time-dependent behavior and design of reinforced concrete and wood structures strengthened with FRP laminates
    PhD, Massachusetts Institute of Technology, 1993.  AAD0573237  DAIB54(6)3239
  4457. S Plitsis
    Modelling the flow of polymeric resins through fibre mats
    PhD, Delaware, 1988 (in progress).
  4458. TJ Plona
    Ultrasonic reflectivity at the Rayleigh angle on a liquid-anisotropic solid interface
    Masters, Georgetown, 1974.
  4459. HE Plumblee
    Transverse vibration analysis of curved sandwich panel.
    Masters, Georgia IT, 1967.
  4460. EZ Plume
    Strength of reinforced plastics in tension at an angle to the reinforcement
    Dissertation, Eng.Sci-Riga, 1974.
  4461. Stephen John Plunkett
    The effects of damage on the coefficient of thermal expansion of composite laminates
    MSEng, University of Lowell, 1992.  AAD1347890  MA30(4)1454  MA30(4)1462
  4462. Po Hsu
    <impact properties of CGHRP>
    Masters, Beijing Inst.Aeronautics & Astronautics, 1986.
  4463. Kishore Venkateswara Pochiraju
    Mechanics of the single fiber pullout problem with several interface conditions
    PhD, Drexel University, 1993.  AAD9319730  DAIB54(3)1486
  4464. JT Podgursky
    Optimisation of orthotropic shell bulkheads
    Masters, Missouri-Columbia, 1967.
  4465. Dean Frederick Poeth II
    The development of the methodology for the optimization of neutron opaque penetrants for use in the evaluation of manufacturing damage in monolithic and composite materials
    PhD, Pennsylvania State University, 1993.  AAD9326926  DAIB54(5)2685
  4466. B Poggiali
    Plastics and composites in automobiles: a technoeconomic assessment of causes and effects of innovation
    PhD, MIT, 1987.
  4467. J Pokras
    Asymmetrically loaded laminated orthotropic conical shells
    Masters, UCLA, 1968.
  4468. Debra Ann Polignone
    A bifurcation approach modeling cavitation in anisotropic nonlinearly elastic solids
    PhD, University of Virginia, 1993.  AAD9332367  DAIB54(11)5707
  4469. Dietmar Werner Poll
    New kinds of physicochemical measurement for characterisation of fast curing epoxies
    Neue formen phisikochemischer messtechnik zur beobachtung schneller haertungsvorgaenge von epoxydharzen
    Dr, Montanuniversitaet Leoben - Austria, 1990.  AADC274401  DAIC54(1)336
  4470. ML Pollack
    Free vibrations of a ring reinforced composite shell.
    Masters, PINY Brooklyn, 1973.
  4471. A Pollard
    The mechanical performance of reinforced plastics in a deep sea environment
    PhD, Salford, 1986. ASLIB 36(2)4414.
  4472. AA Pollock
    Acoustic emission from solids undergoing deformation.
    PhD, London: ICST&M, 1970.
  4473. PB Pollock
    A study of failure in 3-D carbon-carbons.
    PhD, Purdue, 1984. DA8700987.
  4474. WD Pollock
    The microstructure and mechanical properties of high temperature aluminium composites
    Masters, Virginia, 1988.
  4475. Gerry Darren Pollock
    Thin-walled orthotropic laminated beam theory
    PhD, University of Illinois @ Urbana-Champaign, 1993.  AAD9329139  DAIB54(5)2611
  4476. VI Polyakov
    Regulation of the initial stresses in wound reinforced plastic components
    Dissertation, Riga, 1973.
  4477. R Polywka
    Epoxide chemistry
    PhD, Oxford, August 1990. D92706.
  4478. Eric Pomerleau
    Caracterisation dynamique de materiaux composites renforces par des alliages a memoire de forme
    MScA, Ecole Polytechnique, Montreal, 1994.  AADAAIMM97125  MS33(6)1959
  4479. Frederic Pomies
    Degradation of composite materials in a marine environment
    MS, Florida Atlantic University, 1992.  AAD1348213  MA30(4)1454
  4480. SY Ponce
    Etude des proprietes des revetements a base de resines epoxydes
    [Property studies for epoxy resin based coatings]
    Masters, Montreal, 1983.
  4481. C Poncipe
    Some kinetic and mechanistic studies of epoxy resin cure
    PhD, Surrey, October 1985. D68195/86.
  4482. C Pong
    Structure-property relationships in injection moulded neat polyetheretherketone (PEEK) resins
    Masters, Texas @ Arlington, 1987.
  4483. CD Poniktera
    Application of energy release rate principles to compression debonding
    MS, TA&MU, December 1980.
  4484. B Ponsot
    Influence de la matrice sur le comportement a long terme des composites carbone-epoxyde
    [Matrix effects in long term loading of carbon reinforced epoxy]
    PhD, EMP Evry, June 1987.
  4485. Warren James Poole
    The deformation of copper-tungsten [fibre] composites
    PhD, McMaster University (Canada), 1993.  AADNN84939  DAIB54(12)6409
  4486. David Brian Popejoy
    An investigation of crack growth at interfaces in bimaterials and composites using a consistent shear-lag model
    PhD, Missouri-Rolla, 1992. DA9224679. DAIB 53(4)1917.
  4487. G Popp
    On the dynamics of damped distributed composite laminate systems
    Masters, SUNY Buffalo, 1988.
  4488. PG Popper
    Mechanics of bending of fibre assemblies
    PhD, MIT, 1966.
  4489. KF Port
    Vibration & instability of submerged thin-walled axisymmetric domes
    PhD, CNAA: Portsmouth, April 1979. D34861/81.
  4490. EJ Porth
    Effect of an external stress on moisture diffusion in composite materials
    MS, TA&MU, December 1983.
    >>> FF Portillo, see F Folgar-Portillo.
  4491. GG Portnov
    Glass reinforced plastics winding mechanisms.
    Dissertation, Riga, 1967.
  4492. M Poss
    Endommagement et rupture des materiaux composites carbone-carbone
    [Damage and fracture of carbon/carbon composite materials]
    These de 3eme cycle, ENSET-Paris VI(P&M Curie)-CNRS, 23 June 1982.
  4493. AR Postema
    Studies on the preparation of strong and/or stiff polymeric fibres
    PhD, SU Groningen NL, 1988. DAIC 50(1)431.
  4494. JA Potenza
    Laser drilling studies of plexiglass and epoxyglass composites
    Masters, Clarkson CT, 1985.
  4495. SG Pothier
    Use of composites in ultralight aircraft
    Masters, RPI, 1982.
  4496. LA Pottick
    The influence of drying on the structure of poly(para-phenylene benzobisthiazole) fibres
    PhD, Massachussetts, 1986. DA8612073.
  4497. HA Potts
    The quality of fibre reinforced thermoplastics mouldings
    PhD, Brunel, 1987. DX81180. ASLIB 37(3)6040.
  4498. D Pouliot
    Fabrication and testing of short fibre reinforced composites
    Masters, McGill, 1978.
  4499. A Poursatip
    Aspects of damage growth in fatigue of composites
    PhD, Cambridge UK, November 1983. D54443/85.
  4500. D Poussin
    Nouvelles matrices pour materiaux composites a hautes performance a base de polymeres interpenetres- systeme polyepoxyde polyurethane
    [New matrices for high performance composites with interpenetrating polymers- epoxide polyurethane system]
    These de 3eme cycle, Bordeaux-I, 18 March 1982. Thesis #1759. BLDSC X4-3607.
  4501. G Powell
    The viscoelastic properties of filled polymers
    Masters, Maryland, 1972.
  4502. DM Powell and JP Weiss
    Design considerations for the construction of a Sheriff wing in composite materials
    BS, Bristol, June 1982. BU-280. N83-16337.
  4503. Robert Earl Powell
    Mechanical characterization of hybridized braided composite structures
    MS, California State University Long Beach, 1993.  AAD1356111  MA32(3)1051
  4504. LD Power
    Fracture mechanics of fibre reinforced composites
    Masters, Houston, 1968.
  4505. SR Powers
    Determination of fibre diameter distributions by light scattering
    PhD, Wales: Cardiff, 1980.
  4506. AM Poymanov
    Investigation of the physicochemical phenomena at the glass fibre/binder interface and their influence on the strength of fiberglass
    Dissertation, Moscow.Aviat.Eng.Inst, 1965.
  4507. K Prabriputaloong
    Surface reaction between thin aluminium films and silica
    MASc, Toronto, 1971.
  4508. K Prabripuloong
    Interfacial interactions between aluminium and silica and other metal-ceramic systems
    PhD, Toronto, 1973.
  4509. S Prachuktam
    Static, vibration and stability analyses of anisotropic plates
    Masters, Akron, 1974.
  4510. MM Pradas
    <dynamic mechanical behaviour of PET fibre/PMMA matrix biomedical composites>
    DrEngSci, Universidad Politecnica Valencia, 1988.
  4511. B Pradhan
    Stresses around free and pin-loaded holes in filamentary composite laminates
    PhD, IIT Kharagpur, 1981.
  4512. R Prakash
    Non destructive testing and fatigue behaviour of carbon fibre reinforced polymer
    PhD, Cranfield IT, September 1975. D5300/76
  4513. O Prakash
    Finite element analysis of axisymmetric filament wound pressure vessels
    MTech, IIT-Madras, 1985.
  4514. B Prasad
    The response of a composite beam to a moving load
    Masters, Stanford, 1975.
  4515. CB Prasad
    Nonlinear effects in pure bending of composite plates.
    Masters, VPI&SU, 1983.
  4516. V Prasad
    Natural convection in porous media: an experimental and numerical study for vertical annular and rectangular enclosures
    PhD, Delaware, 1983.
  4517. Srinivas Prasad
    Investigation of debonding and crack kinking in foam core sandwich beams
    MSE, Florida Atlanta University, 1993.  AAD1350686  MA31(4)1914
  4518. JN Prassianakis
    General methods for the determination of complex stress intensity factors in plane elasticity problems.
    PhD, National Tech.Univ.Athens-Greece, 1979.
  4519. JL Prater
    Finite element analysis in two-dimensional composites subjected to hygrothermoelastic loadings
    Masters, Alabama @ Huntsville, 1980.
  4520. JL Prater
    A viscoelastic/damage simulation model for filament wound cylindrical pressure vessels
    PhD, Alabama @ Huntsville, 1985. DA8519066. N86-20795.
  4521. G Prathap
    Nonlinear behaviour of flexible bars, anisotropic skew plates and symmetrically stiffened plates
    PhD, IIT Madras, 1977.
  4522. A Preis
    Effect of temperature and strain rate on failure characteristics of unidirectional continuous glass-fibre epoxy composites
    MS, Washington University-MO, 1969.
  4523. Y Prel
    <mixed mode delamination>
    Doctorate, UT Compiegne, June 1987.
  4524. KVH Premachandra
    Factors affecting stress distributions in reinforced plastics
    MSc, Salford, 1971!.
  4525. N Premachandran
    Studies on glass fibre reinforced thermoplastics made from coaxially extruded pellets
    PhD, IIT-Madras, 1984.
  4526. TL Preston
    An analytical study of a class of composites: distribution of stress, load transfer and thermal contact conductance
    PhD, Miami, 1973. DA7403483.
  4527. HL Price
    Curing and flow of thermosetting resins for composite material pultrusion
    PhD, Old Dominion, May 1979. DA7925656.
  4528. RP Price
    Compressive strength of epoxy resin chocks subjected to elevated temperatures
    Masters, NPS Monterey, September 1984. AD A152 018. N85-25532.
  4529. JN Price
    The propagation of stress corrosion cracks in aligned GRP.
    PhD, Liverpool, April 1985. D71131/87. ASLIB 36(2)4101.
  4530. JC Prichard
    Creep rupture and design for strength with short fibre reinforced thermoplastics
    MSc, Cranfield IT, 1987.
  4531. AMN Priest
    The strength of carbon fibres in simple and mixed fibre composites
    PhD, Surrey, September 1983. D48110/83.
  4532. RP Prince
    Compressive strength of epoxy resin chocks subjected to elevated temperatures
    Masters, NPS Monterey, September 1984. AD A152 018.
  4533. S Prioetti
    On the dynamic response of unsymmetrically laminated fibre plates
    Masters, Northeastern, 1972.
  4534. G Pritchard
    The crosslinking of polyesters: a study of network formation by physical methods
    PhD, Aston, 1968.
  4535. RH Pritchard
    Studies in the punching of polyester-glass laminates.
    MPhil, CNAA: (Kingston (Appl.Chem)??), 1979.
  4536. SM Profeti
    <effect of interparticle distance on volume strains>
    Tesi di Laurea, Pisa, 1990.
  4537. RW Proft
    The effects of composite tailoring on the dynamic response of a wing tail flutter model
    Masters, Texas @ Austin, 1977.
  4538. HW Prosser
    Ultrasonic characterisation of the nonlinear elastic properties of unidirectional graphite/epoxy composites
    Masters, John Hopkins, 1987.
  4539. William Henry Prosser
    The propagation characteristics of the plate modes of acoustic emission waves in thin aluminium plates and thin graphite/epoxy composite plates and tubes
    PhD, John Hopkins, 1992. DA9216615. DA 53(1)503.
  4540. AW Pryce
    Matrix cracking and stress/strain behaviour of continuous fibre ceramic composite laminates
    PhD, Surrey, 1991. DX95386. DAIB 52(11)6030.
  4541. KN Ptak
    Preparation and properties of model rubber toughened epoxy resins
    PhD, Akron, 1987. DA8703948.
  4542. A Puck
    Beanspruchung und verformung mehrschichtiger verbundstoff-bauelemente aus glasseidenstrangen und kunststoffen
    [On stressing and deformation of multilayered combined-material structural elements of glass yarn and plastics]
    Dissertation, TU Berlin, 1966/TH Darmstadt, 1967/RWTH Aachen, 1968.
  4543. D Puetz
    Kunststoffe in korrisiven Flussigkeiten-dargestellt an den Beispielen von PMMA und GF-UP
    [Plastics in corrosive liquids- examples of pmma & glass-polyester]
    DIng, RWTH Aachen, 1977. DS7707.
  4544. P Puget
    <first cycle damage initiation in flexural fatigue of UD-GFRP>
    Doctorat, ECL Lyon, 1988.
  4545. CA Pulgar
    Swelling of polymers as a measure of crosslinking.
    Masters, Pittsburg SU, 1984.
  4546. D Pullen
    The hydrolytic stability of self-reinforcing polyesters
    PhD, CNAA: Coventry/Lanchester, February 1991. DX93952.
  4547. GK Puntambekar
    Analysis of specially orthotropic laminated structural element
    ME, Carleton-Ottawa, 1984.
  4548. MA Pustejovsky
    Fabrication, testing and analysis of a structural sandwich construction
    Masters, MIT, 1973.
  4549. NS Putcha
    A mixed shear flexible finite element for geometrically nonlinear analysis of laminated plates
    PhD, VPI&SU, May 1984. DA8421886.
  4550. R Putz
    A univariate Monte-Carlo technique using component failure test data to approximate reliability confidence limits of systems with components characterised by the Weibull distribution
    Masters, AFIT @ WPAFB, 1979.
    >>> D Putz, see D Puetz.
  4551. KF Pye
    Strength variation in a DMC moulding
    BSc, Nottingham, 1967.
  4552. CJ Pye
    Use of vibration for the assessment of structural integrity with particular reference to composite materials
    PhD, Bristol, 1981.
    >>> CJ Pye, see P Cawley.
  4553. Eumi Pyun
    Characterisation of epoxy and polyimide cure by UV visible and fluorescence spectroscopy: azochromomorphic labelling approach
    PhD, Connecticut, 1988. DA8905387. DAIB 49(12)5505.
  4554. Mohamad Subhi Khalil Qatu
    Free vibration and static analysis of laminated composite shallow shells
    PhD, Ohio SU, 1989. DA9002010. DAIB 50(8)3659.
  4555. MM Qayyum
    A study of the effects of incorporating thermoplastic fibres in polypropylene
    PhD, CNAA: Newcastle upon Tyne, 1978.
  4556. Dongxin Qi
    Processing and properties of discontinuous carbon fibre reinforced glass matrix composites
    PhD, Pennsylvania SU, 1990. DA9032365. DAIB 51(6)3079.
  4557. X-W Qian
    Structural and electrical properties of graphite intercalation compounds and graphite fibre compounds.
    PhD, Michigan SU, 1987. DA8714359.
  4558. Yibo Qian
    Impact response of carbon/epoxy laminated plates
    PhD, Utah, 1990. DA9024428. DAIB 51(5)2580.
  4559. Yang Qian
    Elastic wave in layered anisotropic materials
    PhD, University of Cincinnati, 1993.  AAD9329962  DAIB54(6)3304
  4560. Julie Yu Qian
    The development of core-shell latex particles as toughening agents for epoxies
    PhD, Lehigh University, 1994.  AADAAI9519  DAB56(2)853
  4561. Yanping Qiu
    Theory of inclusions in the elastic and elastic-plastic deformation of composite materials
    PhD, SUNJ New Brunswick, 1991. DA9125394. DAIB 52(3)1683.
  4562. J Qu
    Backscatter from flaws in fibre-reinforced composites.
    PhD, NWU, 1987. DA8723703.
  4563. Rong Qu
    Theoretical analysis of reinforced and prestressed concrete bridge members strengthened with CFRP laminates
    MSE Florida Atlantic University, 1994.  AADAAI1359893 MA44(3)951.
  4564. Stephen Warfield Quander
    Effects of processing variables on flexural strength and fracture morphology of in-situ nitride whisker reinforced barium aluminosilicate ceramic matrix composites
    MS, University of Texas at Arlington, 1994  AAD1358882  MA33(2)627
  4565. JM Quenisset
    Une nouvelle method de controle de la fusion en zone flottante-application a la cristallogenese et a l'elaboration de composite in situ  [A new method of control for float-zone fusion- application to crystallogenesis and enhancement of in-situ composite]
    DEtatSci, Bordeaux-I, 8 May 1980. Thesis #651.
  4566. JJ Quigley
    Computer aided design for general composite material systems
    Masters, Delaware, 1981.
  4567. JJ Quigley
    Statistically-based two-dimensional finite element analysis of problems with uncertain stiffness and strength properties
    Masters, MIT, 1986.
  4568. Daniel Thomas Quillin
    Interface characteristics and adhesion in cellulose/polypropylene composites
    PhD, University of Wisconsin - Madison, 1993.  AAD9320922  DAIB54(7)3801
  4569. NC Quinn
    Reinforced thermoplastics for engineering applications
    PhD, Aston, 1985. DX83375. DAIC 49(2)2138. ASLIB 37(4)8653.
  4570. WW Quinn
    Multivariable control of a forward swept wing aircraft.
    MS, MIT, January 1986. LIDS-TH-1530. NASA-CR-177112. N86-28953.
  4571. Peter Joseph Quinn
    Reinforcement fibers in a profile extrusion for marine applications
    MSEng, University of New Brunswick, 1991.  AADMM69828  MA31(1)379
  4572. Peter Joseph Quinn
    Reinforcement fibers in a profile extrusion for marine applications
    MSEng, University of Lowell, 1992.  AAD1348381  MA31(1)436
  4573. N Raazi
    Determination of cracking stresses and bond strength for fibre glass reinforced polymer concrete beams
    Masters, Texas @ Austin, 1986.
  4574. Richard L Rabe
    Corona discharge effects on the interfacial adhesion in a sheath-core type composite fibre
    PhD, Ohio, 1989. DA8915261. DAIB 50(6)2526.
  4575. AL Rabinovich
    Certain fundamental problems in the mechanics of reinforced polymers
    Doctorate, Inst.Chem.Phys.USSR.Acad.Sci, 1966.
  4576. VA Rach
    Effect of bond strength of the reinforcement-matrix interface on the strength of unidirectionally reinforced plastics in compression
    Dissertation, Riga, 1980.
  4577. J Raclin
    Contribution theorique et experimentale a l'etude de la plasticite, de l'ecrouissage et de la rupture des solides anisotropes
    [Theoretical and experimental study of plasticity, cold-working, and fracture of anisotropic solids]
    These de Doctorate es Sciences, Grenoble, 1984.
  4578. DJ Radcliffe
    Thermal and electrical properties of composites
    DPhil, Oxford, 1981. D36497/81.
  4579. DW Radford
    Shape stability in composites
    PhD, RPI, 1987. DA8729319.
  4580. IG Radinsh
    Micromechanics of creep in reinforced plastics under simple types of loading
    Dissertation, Riga, 1981.
  4581. BA Radley
    Selection of nondestructive evaluation thermographic liquid crystal system for fibreglass laminates via a numerical thermal analysis
    Masters, MIT, 1982.
  4582. AJ Rafanelli
    Determination of the applied circumferential (hoop) stress in a ceramic stack cylinder due to a fibreglass/epoxy wrapped jacket
    Masters, Rhode Island, 1985.
  4583. Ioannis G Raftoyiannis
    Buckling mode interaction in FRP columns
    PhD, West Virginia University, 1994.  AAD9427984  DAIB55(6)2368.
    >>> MN Raghavendra Rao, see MNR Rao
  4584. Venkatkrishna Raghavendran
    Effects of molecular weight of thermoplastic matrix processing conditions on interfacial adhesion in carbon fiber composites
    MS, Michigan State University, 1994.  AAD1357941  MA33(1)203
  4585. TA Rahman
    Structural behaviour of glass reinforced plastics
    PhD, Aston, 1979. D29280/80.
  4586. DHA Rahman
    Instability problems of an antisymmetric cross-ply laminated composite
    MSc, Strathclyde, 1980.
  4587. MU Rahman
    Stress and strength analysis of double bolted  mechanical joints in orthotropic materials
    PhD, Wisconsin, August 1981.
  4588. Shahzad Rahman
    Micromechanics-based analysis of fiber-reinforced laminated composites
    PhD, University of Illinois @ Urbana-Champaign, 1992.  AAD9305661 DAIB53(10)5348
  4589. Mohamed Rahmani
    Caracterisation des lignes de soudure dans les composites thermoplastiques moules par injection
    [Weld lines in injection moulded thermoplastic composites]
    PhD, Ecole Polytechnique Montreal, 1990. DANN58923. DAIB 52(11)6065
  4590. MV Rahner
    Natural vibrations of anisotropic thin circular cylindrical shells
    Masters, MIT, 1984.
  4591. AMT Rahni
    An investigation of the hydroelastic stability of a glass reinforced plastic sonar dome
    MS, Texas @ Austin, May 1982. BLDSC/Thesis/1982/R129: MFR-6458.
  4592. Habib Gerges Rai
    Finite element analysis of cure induced residual stress in composite materials
    PhD, Dayton, 1988. DA8909276. DAIB 50(2)638.
  4593. J Raison
    Prediction and measurement of mechanical properties of semicrystalline homopolymers
    DSc, Washington University-MO, 1974.
  4594. AAJ Rajan
    Buckling and postbuckling of carbon fibre composite compression panels with deliberately built-in delaminations.
    MSc, Strathclyde, June 1985. ASLIB 36(3)6642.
  4595. DS Rajan
    Investigation of damage in Kevlar/epoxy composites using acoustic emission technique
    MTech, IIT Kanpur, May 1988.
  4596. G Rajendran
    Mechanical behaviour of metal-matrix composites under compression
    Masters, Drexel IT, 1981.
  4597. Mrs C Rajput
    Study of bonded joints in fibre reinforced plastics.
    MTech, IIT-Madras, 1982.
  4598. VK Raju
    Effect of damaged fibres on the mechanical behaviour of unidirectional short fibre composites
    Masters, Michigan TU, 1988.
  4599. S Ramachandran
    Design sensitivity analysis and maximum frequency design of symmetric laminated angle-ply plates
    Masters, Howard, 1989.
  4600. CH Ramage
    Investigation of the tribological properties of graphite fibre-metal matrix composites
    PhD, Texas @ Austin, 14 July 1978. DA7807369. N78-27181.
  4601. JV Ramakrishnan
    A finite element model for sound transmission through laminated composite panels
    Masters, Missouri-Rolla, 1983.
  4602. Vijay Ramakrishnan
    Mechanical behaviour of borosilicate glass ceramic metrix-Nicalon (silicon carbide) fibre composites
    PhD, Cincinnati, 1991. DA9215475. DAIB 53(2)1019.
  4603. G Ramamurthy
    Mechanics of debond growth in adhesively bonded composite joints
    Masters, Missouri-Rolla, 1986.
  4604. SV Ramanamurthy
    Evaluation of glass epoxy composites for deep drawing tools and heated moulds
    MTech, IIT-Madras, 1984.
  4605. R Ramanathan
    Dynamic dielectrometry of thermosetting resins.
    PhD, Louisville, 1986. DA8621453.
  4606. Sriram Ramanathan
    Laser cutting and drilling of ceramics and ceramic composites
    PhD, Pennsylvania State University, 1993.  AAD9326929  DAIB54(5)2715
  4607. SV Ramani
    Crack propagation in metal matrix composites
    PhD, Sussex, 1974. D20885/77.
  4608. Karthik Ramani
    Die-less forming of thermoplastic matrix continuous fibre composite materials
    PhD, Stanford, 1991. DA9205707. DAIB 52(9)4941.
  4609. MK Ramasubramanian
    Computer simulation of the uniaxial stress-strain behaviour of ribbon-like fibre nonwovens
    PhD, Syracuse, 1987. DA8806702.
  4610. A Ramaswamy
    Applications of 2-D composite finite element analysis to elastomeric bearing problems
    Masters, California: Davis, 1986.
  4611. SV Ramesh
    Stress-strain characteristic of reinforced plastic conveyor belting
    Masters, Villanova, 1970.
  4612. Minisandram Seshadri Ramesh
    A finite element model for the simulation of powder metallurgy forming processes including metal matrix composites
    PhD, Clemson, 1991. DA9213068. DAIB 52(12)6491.
  4613. JE Ramey
    Comparison of notch strength between Gr/PEEK (APC-1 and APC-2) and Gr/epoxy composite materials at elevated temperatures.
    Masters, AFIT, December 1985. AFIT/GAE/AA/85D-12. AD A164 033.
  4614. R Ramirez
    Local loads in GRP cylindrical shells
    MSc, UMIST, 1982.
  4615. R Ramirez
    Design of a high speed graphite composite robot arm.
    Masters, MIT, 1984.
  4616. A Ramirez de Arellano Lopez: see AR de Arellano Lopez
  4617. RG Ramirez:  see R Garcia-Ramirez
  4618. RL Ramkumar
    Propagation of delamination in layered anisotropic cylinders
    PhD, VPI&SU, 1977. DA7720261.
  4619. J Raney
    Fourier analysis of ultrasonic reflections from layered media
    Masters, Wright SU, 1981.
  4620. A Rangarajan
    Elastic lateral buckling of orthotropic beams
    PhD, Wisconsin: Madison, 1978. DA7804876.
  4621. RMB Rao
    Thermal stresses in orthotropic plates
    Masters, Virginia, 1967.
  4622. MSM Rao
    Plasticity theory of fibre reinforced metal matrix composites
    PhD, Duke, 1974. DA7510719. N75-23694.
  4623. VB Rao
    Control of interface reactions in SiC/Ti composites and an X-ray diffraction study of interdiffusion between Al thin films and Ti substrates
    PhD, VPI&SU, 1980. DA8110473.
  4624. RMVGK Rao
    Diffusion phenomenon in polymer composites, permeable and impermeable fibre composites
    PhD, IIS-Bangalore, December 1982.
  4625. MN Raghavendra Rao
    Non-destructive evaluation of crack-like defects and delaminations in GFRP composites
    PhD, IIS Bangalore, 1987.
  4626. Mohan Doraganahalli Rao
    Studies on the damping of graphite epoxy materials and structural joints
    PhD, Auburn, 1988. DA8918815. DAIB 50(5)2121.
  4627. Venkatesh Rao
    Interfacial changes during the processing of a typical carbon fibre epoxy composite material
    PhD, Michigan SU, 1991. DA9216346. DAIB 53(3)1505.
  4628. Vidish Subba Rao
    Finite element analysis of viscoelastically damped composite structures
    PhD, Florida, 1991. DA9209067. DAIB 52(10)5357.
  4629. P Raos
    Systematic approach to design of moulds for injection moulding of thermosets
    MSc, Univ Zagreb, 1986.
  4630. B Raplee
    Wrinkling of a sandwich construction
    Masters, UCLA, 1975.
  4631. R Rashedi
    Equivalent homogeneous anisotropic properties for composite plates
    Masters, California: Davis, 1979.
  4632. HU Rashid
    Sorption and diffusion of water in epoxy resins
    PhD, Sheffield, April 1979. D40709/82.
  4633. M Rashidy
    Design and analysis of a cost and weight efficient load bearing composite passenger car door
    PhD, Cranfield IT, April 1988. DX82124. ASLIB 38(2)4430.
  4634. AO Rasskazov
    Multilayer orthotropic gently curving shells & plates.
    Doctorate, Kiev, 1978.
  4635. J Rasty
    The effect of imperfect contact between adjacent layers on the integrity of multilayer wrapped vessels
    Masters, Louisiana SU, 1984.
  4636. Nipon Rattanawangcharoen
    Propagation and scattering of elastic waves in laminated circular cylinders
    PhD, University of Manitoba, 1993.  AADNN85957  DAIB55(3)993
  4637. CJ Rattew
    Structural studies on fibrous biopolymers
    DPhil, Oxford, 1977!.
  4638. Abdul Rauf
    Thermal reconstruction techniques for the inspection of laminated composites
    DPhil, Strathclyde, 1990. D95274. DAIB 52(11)6007.
  4639. Vasudha Ravichandran
    Surface grafting of Kevlar (RTM) fibres for improved interfacial properties of fibre-reinforced composites
    PhD, Cornell, 1991. DA9113399. DAIB 51(12)6089.
  4640. JD Rawles
    The effect of transient overloads on stress-rupture of glass fibre reinforced polymers
    PhD, Bath, 1990. DX93936. DAIB 52(7)3864.
  4641. RA Rawlinson
    Design and testing of GFRP wing box
    MSc, Cranfield IT, September 1974.
  4642. H Razi
    Slow stable delamination in graphite/epoxy composites
    MS, TA&MU, December 1982.
  4643. N Razi
    Systems analysis of polymer processing procedures
    MSc, Univ Zagreb, 1985.
  4644. Hamid Razi
    An experimental and numerical study of delamination propagation and arrest in composite beams and plates when subjected to low velocity impact
    PhD, Univ Washington - WA, 1991. DA9124942. DAIB 52(3)1683.
  4645. Ahmad Razvan
    Fiber fracture in continuous-fiber reinforced composite materials during cyclic loading
    PhD, Virginia Polytechnic Institute and State University, 1992.  AAD9425592  DAIB55(4)1509
  4646. RH Reams
    Transverse shear considerations in anisotropic plates
    Masters, AFIT @ WPAFB, 1988.
  4647. Karim Sami Rebeiz
    Structural use of polymer composites using unsaturated polyester resins based on recycled poly(ethylene terephthalate)
    PhD, University of Texas at Austin, 1992.  AAD9239341  DAIB53(8)4269
  4648. CJ Rebello
    Transient stress wave propagation in laminated composite: analysis and experiment
    Masters, VPI&SU, 1984.
  4649. S Rechak
    Effect of adhesive layers on impact damage and dynamic response in composite laminates
    PhD, Purdue, 1986. DA8710790.
  4650. RH Reckers
    Experimental study of segmented plastic sandwich shell structures
    Masters, Purdue, 1973.
  4651. B Reckmann
    <FRP in aqueous media>
    Diploma report (not dissertation), IKV-Archiv-Nr-D7931, 1979.
  4652. Louis Patrick Rector
    Polypyrrole/poly(p-phenylene terephthalamide) composite fibres:
    morphology, mechanics and electrical properties
    PhD, NWU, 1991. DA9129058. DAIB 52(5)2733.
  4653. VS Reddy
    Analyses of cross-ply rectangular plates of bimodulus composite material
    MSc, Oklahoma, 1980.
  4654. AD Reddy
    Behaviour of continuous filament advanced composite isogrid structure
    PhD, Georgia IT, 1980. DA8107287. N81-22095.
  4655. M Reddy
    Embedded optical fibre sensor of differential strain and temperature in graphite/epoxy composites
    MSEE, VPI&SU, August 1987.
  4656. Yeruva Satyanarayana Reddy
    Numerical simulation of damage and progressive failures in composite laminates using the layerwise plate theory
    PhD, Virginia Polytechnic Institute and State University, 1992.  AAD9237155  DAIB53(9)4767
  4657. Vijaya Bhaskar Reddy
    Indentation damage of composite rod reinforced laminated compositebBeams
    MS, University of Texas at Arlington, 1995.  AADAAI1375089  MA33(6)1904
  4658. K Redford
    Control of volatiles and prevention of void formation in epoxy resin/carbon fibre composites
    MSc, Lancaster, 1983. Restricted access.
  4659. AK Redway
    An investigation into certain aspects of stress corrosion of metallic reinforcements in plastics
    PhD, London: Kings, 1958!.
  4660. ED Reese
    Friction and wear behaviour of unidirectional and 3-dimensionally braided fibre Fb/aluminium composites
    Masters, Delaware, 1987.
  4661. ME Regelbrugge
    Buckling behaviour of thin composite sandwich panels
    Masters, MIT, 1980.
  4662. RF Regester
    The strength and perfection of alumina whiskers
    Masters, Penna, October 1963.
  4663. DL Reichert
    Electrochemical measurements for the evaluation of composites containing simulated in-service damage
    Masters, Virginia, 1987.
  4664. Veronica Eva Reins
    Crystallization processes in poly(ethylene terephthalate) and poly (ethylene terephthalate)/polycarbonate blends as modified by fiber reinforcement and polymer additives
    PhD, Princeton University, 1995.  AADAAI9519122 DAB56(2)966
  4665. N Remedios
    Stresses in reinforced composites
    PhD, London: ICST&M, 1970
  4666. Y Remond
    Sur la reconstitution du comportement mecanique d'un composite 3D a partir de ses constituents
    [On the reconstitution of mechanical behaviour of a 3-D composite from the constituents]
    Doctorat de 3eme cycle, Paris VI-ENSET Cachan, 19 November 1984.
  4667. OG Remond
    Characterisation and modelling of 3-D braided metal matrix composites
    Masters, Delaware, 1988.
  4668. Dafen Ren
    A statistical failure theory and hybrid effect of unidirectional fibre composites under axial tension
    Masters, South China IT, 1982. In Chinese.
  4669. S Ren
    Bonding kinetics of thermosetting adhesive systems used in composites
    Masters, Oregon SU, 1988.
  4670. J Renard
    Etude de l'endommagement en cisaillement dans les materiaux composite unidirectionnels
    [Study of shear damage in unidirectional composites]
    DIng, Ecole Nationale Superiere d'Art et Metiers, ENSTA Paris, 23 February 1982.
    Paris 6 Univ Report 156. N83-33976.
  4671. M Renault
    Tolerance a l'endommagement de composite carbone-resine stratifie
    [Damage tolerance of laminated T300/914 CFRP]
    PhD, EMP Evry, 10 October 1988.
  4672. RW Render
    Temperature and strain rate dependence deformation in Al-Al3Ni composites
    Masters, MIT, 1968.
  4673. MP Renieri
    Rate and time dependant behaviour of structural adhesive
    PhD, VPI&SU, 1976. DA7623232. N77-11112.
  4674. GD Renieri
    Nonlinear analysis of laminated fibrous composites
    PhD, VPI&SU, June 1976. DA7623231. VPI-E-76-10. NASA-CR-148317. N76-27359.
  4675. BW Rentch
    A new test method for the evaluation of shear properties of reinforced epoxy structures
    Masters, Virginia, 1968.
  4676. WJ Renton
    The analysis and design of composite material bonded joints under static and fatigue loadings
    PhD, Delaware, 1974. DA7426141.
  4677. R Renz
    Zum zugigen und zyklischen Verformungsverhalten polymerer Hartschaumstoffe
    [Impact and fatigue deformation resistance in solid polymeric foam]
    Dissertation, Karlsruhe, 1977.
  4678. H Resalati
    Stabilisation of jute fibres against photodegradation by antioxidants
    PhD, University of Washington-WA, 1986.
  4679. RS Resnick
    Influence of orthotropicity and boundary conditions on the frequency response characteristics of cylindrical shells.
    Masters, MIT, 1966.
  4680. Nathalie Retourne-Rochat
    Acoustic emission from carbon/epoxy composite under constant load
    Etude de l'emission acoustique diferee dans les composites carbone-epoxyde
    Dr, Intitut National des Sciences Appliques de Lyon, 1991.  AADC301038  DAIC54(3)928
  4681. JGG Reyes:  see JG Gonzalez Reyes
  4682. Pascal Roger Reynaud
    Fatigue behaviour of ceramic matrix composites characterized by acoustic emission
    Etude du comportement en fatigue des materiaux composites a matrice ceramique suivi par emission acoustique
    PhD, Institut National des Sciences Appliques de Lyon, 1992.  AADC282683  DAIC54(2)623
  4683. MA Rezaizadeh and S Mall
    Mixed mode cyclic debonding of adhesively bonded composite joints
    MS, Missouri, October 1985. NASA-CR-177991. N86-12255.
  4684. Mohamad A Rezvani
    A study of near tip phenomena for cracks in a particulate composite
    PhD, VPI&SU, 1989. DA8922363. DAIB 50(7)3004.
  4685. HW Rhee
    Electrochemical polymerisation of copolymer coatings onto graphite fibres: process and fibre bonding studies
    PhD, Connecticut, 1988. DA8812194.
  4686. Kyong Yop Rhee
    Studies on numerical and experimental determination of energy release rate for composite laminates
    PhD, Georgia IT, 1991. DA9206105. DAIB 52(11)6043.
  4687. Juhun Rhee
    Geometric discontinuities in orthotropic composites
    PhD, University of Wisconsin, 1995.  AADAAI9528661  DAB56(7)3985
  4688. GV Rhoades
    The effect of the structural parameters of polyester resins on the mechanical properties of polyester moulding compounds
    PhD, CNAA: Kingston, 1979.
  4689. J Rhodes
    The post buckling behaviour of thin-walled beams
    PhD, Strathclyde, 1969.
  4690. RA Ricciuti
    Finite element modelling of non-linear elastic anisotropic axisymmetric solids under non-symmetric loading.
    Masters, McMaster, 1985.
  4691. DJ Rice
    Fatigue and failure mechanisms in glass reinforced plastics under complex stresses
    PhD, Nottingham, May 1981. D38722/81.
  4692. GG Rice
    Small-angle X-ray scattering characterisation of voids in Kevlar 49 and graphite fibres
    Masters, Tennessee @ Knoxville, 1984.
  4693. TG Richard
    The mechanical and optical characterisation of a micro-sphere filled composite
    PhD, Wisconsin, 1973. DA7407491.
  4694. RV Richard
    Pultrusion modelling for die design and process control.
    PhD, Tufts, 1986. DA8702398.
  4695. HJ Richard
    Thermoplastic matrices and their carbon fibre reinforcements
    MSc, Cranfield IT, 1987.
  4696. GL Richards
    Nonlinear response of laminated composites
    Masters, Arizona, 1969.
  4697. JM Richards
    Studies of defects in composites and an evaluation of thermal expansion moulding
    PhD, Salford, 1986. D69644/86. ASLIB 36(2)4523.
    >>> ODV Richards, see MJ Pearse.
  4698. LT Richardson
    Axisymmetric free vibrations of sandwich conical shells
    Masters, Tulsa, 1967.
  4699. Kathryn M Richmond
    The characterisation and mechanical properties of a series of fibrous hybrid composites
    PhD, Loughborough UT, 1983. D46883/83.
  4700. MA Richter
    Mechanical characterisation and fracture investigation of FP/aluminium unidirectional composite material.
    MASc, Delaware, 1984.
  4701. JP Ricketts
    Motion synthesis and evaluation in maypole braiders
    PhD, CNAA: Liverpool, 1987. Confidential to July 1989.
  4702. D Riedel
    Untersuchung des kurzzeit-kreichverhaltens von flachstaben aus polyvinylchlorid mit zweiseitiger aussenkerbe [Short term creep in flat double-edge-notched PVC rod]
    Dissertation, TH Aachen, 1968.
  4703. JM Rieger
    Flow of short fibre filled polypropylene melts
    Masters, McGill, 1977.
  4704. R Riess
    Untersuchungen zum verformungsverhalten thermoplastische kunststoffe in ausgewahlten flussigkeiten
    [Study of deformation in thermoplastics in selected liquids]
    Dissertation, TH Aachen, 1973. DS7309.
  4705. DM Riggs
    A comparitive study of processing techniques for low cost high performance fibres
    MS, RPI, 1975.
  4706. DM Riggs
    The characterisation and kinetic mechanism of mesophase formation in high molecular weight carbonaceous materials and it's relationship to the concepts of thermal and catalytic cracking
    PhD, RPI, 1979. DA8011509.
  4707. RB Rikards
    Long term stability of cylindrical shells made of composite material under external pressure
    Dissertation, Riga, 1970.
  4708. VR Riley
    Mechanical behaviour of fibrous and laminated composites.
    PhD, Cambridge (& Toronto), 1966-7.
  4709. DS Ring
    Determination of the relationship of free volume to mechanical behaviour for an epoxy system subjected to various aging histories
    Masters, TA&MU, August 1979.
  4710. Dominik Ringer
    Fiber/matrix interactions in metal matrix composites based on nickel alloy matrices reinforced with single crystal alumina fibers
    PhD, Michigan Technological University, 1995.  AADAAI9526478  DAB56(4)2266
  4711. U Ringertz
    Structural optimisation using numerical techniques.
    Licentiate, KTH Stockholm, 1986. KTH-Report-86-18.
  4712. U Ringertz
    A mathematical programming approach to structural optimisation
    Doctorate, KTH Stockholm, 1988.
  4713. MA Ripepi
    An analysis of the effect of thermal contact resistance on heat flow through layered materials
    Masters, Pittsburgh, 1986.
  4714. S Risbud
    Influence of surface damage on strength of a brittle matrix composite
    Masters, California: Berkeley, 1971.
  4715. Phillip Ritchie
    External reinforcement of concrete beams using fibre reinforced materials
    Thesis, Lehigh, 1988.
  4716. Philip Allan Ritchie
    Analysis and design of a prestressed fiber composite/cable beam-truss structural system
    PhD, Lehigh University, 1994. AADAAI9513137 DAB5(12)5477
  4717. A Rivera
    Delamination of elastic laminates during wave propagation.
    Masters, Texas @ Austin, 1983.
  4718. Robert Rizza
    Dynamic penny-shaped crack problems in transversely-isotropic materials
    PhD, Illinois Institute of Technology, 1995.  AADAAI9530134  DAB56(5)2828
  4719. SA Rizzi
    Fatigue crack growth in boron/aluminium metal matrix composites
    Masters, Purdue, 1985.
    >>> M R'Mili, see MR Mili.
  4720. Jeng-Jong Ro
    Control of the static, dynamic and thermal characteristics of nitinol-reinforced plates
    PhD,  Catholic University of America, 1993.  AAD9328903  DAIB54(6)3306
  4721. P Roberg
    Dimensionierungsgrundlagen fur dynamisch beanspruchte kunststoff-rohrsysteme, dargestellt am beispiel einer PVC-harz-rohr-leitung [Design fundamentals for dynamically stressed plastics systems, depicted by one example of solid PVC pipe]
    Dissertation, TH Aachen, 1971. DS7105.
  4722. J Roberge
    Characterisation de l'endommagement des materiaux composites carbone-epoxyde sollicites en compression statique et cyclique
    [Characteriation of static and fatigue compression load damage in carbon-epoxy composites]
    Masters, Sherbrooke, 1988.
  4723. KD Roberts
    Processability/mechanical properties trade-off for reinforced plastics
    MS, Washington University-MO, 1973.
  4724. JE Roberts
    Transient wave propagation in a composite material.
    Masters, Tennessee TU, 1974.
  4725. JC Roberts
    The design and wear test of continuous fibre/particulate composite total surface hip replacement
    PhD, RPI, 1980. DA8020414.
  4726. Patricia D Roberts-McDaniel
    Physical and mechanical behaviour of amorphous poly (arylene ether-co-imidazole)s and poly (arylene ether-co-imidazole) modified epoxies
    PhD, College of William and Mary in Virginia, 1994.   AAD9433584  DAIB55(7)2960
  4727. David D Robertson
    A nonlinear three-dimensional micromechanics model for fiber-reinforced laminated composites
    PhD, Air Force Institute of Technology, 1993.  AAD9409968  DAIB54(11)5793
  4728. LM Robichaux
    Effects of implanted delaminations on tensile strength of graphite-epoxy laminates
    Masters, AFIT, 1986. AFIT/CI/NR-86-130T. AD A171 329. N87-15278.
  4729. CW Robinson
    Shear waves in layered composites
    PhD, California: Davis, 1972. DA7316930.
  4730. JD Robinson
    A study of some thermophysical properties of composites based on polymer matrix materials
    PhD, Brunel, January 1975.
  4731. AM Robinson
    PET blends and glass fibre composites
    MPhil, Loughborough, 1986. ASLIB 39(2)4669.
  4732. HH Robinson
    Experiments on the strength and creep rupture of carbon/epoxy microcomposites
    Masters, Cornell, 1987.
  4733. IM Robinson
    Optomechanics of polymer fibres and composite materials
    PhD, London: QMC, 1987. ASLIB 37(1)1723.
  4734. Peter Timothy Robinson
    The dynamics and scientific visualization for the electrophoretic deposition processing of suspended colloidal particles onto a reinforcement fiber
    MS, Michigan State University, 1993.  AAD1354908  MA32(3)1044
  4735. Lucien Marinus Johannes Robroek
    The development of rubber forming as a rapid thermoforming technique for continuous fibre reinforced thermoplastic composites: quality control by process control
    Dr, Technische Universiteit te Delft - Netherlands, 1994.  AADC369942  DAIC55(4)1328
  4736. ADA Rocha
    On the effective conductivity of composite media
    PhD, Stanford, 1973. DA7406536.
  4737. MA Rochefort
    Nonlinear viscoelastic characterisation of structural adhesives
    Masters, VPI&SU, August 1983. VPI-E-83-26.
  4738. JP Rocher
    <K2ZrF6 as a wetting aid in gravity casting of aluminium into Nicalon (SiC) 2-D preforms>
    Thesis #888, Bordeaux, 23 June 1986.
  4739. JW Rock
    Studies on the environmental stress corrosion cracking of model glass/epoxy composites
    PhD, Surrey, April 1983. D47144/83.
  4740. LJ Rodenburg
    Produktie van Aluminium-Silicium Carbide Composieten
    [Production of aluminium-silicon carbide composites]
    Thesis, TH Delft (NL), May 1986. ETN-86-98696. N87-14446.
  4741. GL Roderick
    Crack propogation in aluminium sheets reinforced with boron-epoxy
    PhD, Old Dominion, May 1978. DA7813916. N78-32183.
  4742. MA Rodgers
    A method of determining the viscosity of thermosetting moulding compounds
    Masters, Arizona SU, 1968.
  4743. BT Rodini
    Impact study of laminated composite plates
    PhD, Drexel, 1975. DA7521682.
  4744. PDD Rodrige
    L'etude du frittage-reaction de ceramiques a base mullite
    [Study of sintering of mullite based ceramics]
    Doctorate, Limoges, 1986.
  4745. JM Roelandt
    Variational formulations and finite element program to perform elastic anisotropic calculations for thick homogeneous plates and sandwich plates
    3eme PhD, UT of Compiegne, 28 June 1978.
  4746. John Robert Rogacki
    A combined experimental analytical methodology for characterizing the thermoviscoplastic deformation of a metal matrix composite
    PhD, University of Washington, 1992.  AAD9239491  DAIB53(8)4331
  4747. DG Rogalla
    Ein Beitrag zur Erklaeringder Spannungsrissbildung bei Kunststoffe
    [Imaging to explain tensile cracks in polymers]
    Dissertation, RWTH Aachen, 1982. DS8203.
  4748. JB Rogers
    Aeroelastically tailored propellors
    MS, Texas @ Austin, May 1976.
  4749. JB Rogers
    Aeroelastic tailoring of composite materials
    Masters, TA&MU, August 1979.
  4750. JC Rogers
    An investigation of the damage tolerance characteristics of graphite/epoxy pressure vessels
    Masters, MIT, 1981.
  4751. CA Rogers
    An axisymmetric linear/high-order finite element for filament-wound composite structures
    PhD, VPI&SU, 1987. DA8804423.
  4752. Scott Alfred Rogers
    Comparative analysis of a composite hat stiffener by various codes
    MS., California State University - Fullerton, 1994.  AAD1357369  MA32(6)1697
  4753. AH Rogowski
    Compression moulding simulation for the design of complex geometry composite parts
    MS, MIT, 1987.
  4754. M Rohadi
    Tests and strength evaluation of composite fibre reinforced panels (Bumaco laminated panels)
    Masters, Concordia, 1986.
  4755. A Rohmi
    Non linear stress analysis of composite end cap connected to composite skeletal systems
    PhD, Surrey, January 1990. DX78201.
  4756. Donald F Rohr
    Modelling reaction and diffusion in epoxy-amine polymerization kinetics
    PhD, Delaware, 1988. DA8824213. DAIB 49(8)3331.
  4757. Kim Michael Rohwer
    A comparison of flat and curved parallel fibre composite specimens in short-beam shear
    MS, California SU Fullerton, 1992. MA1346584. MA 30(2)368.
  4758. JI Rojas
    Static tensile behaviour of graphite/epoxy laminates with holes
    Masters, MIT, 1980.
  4759. OE Rojas
    Suspension processing of aluminium oxide-zirconium oxide-silicon carbide whisker composites
    Masters, Florida, 1988.
  4760. S Rojstaczer
    Thermal expansion of Kevlar fibres and composites
    MSc, Hebrew Univ-Israel, 1984.
  4761. RH Rolland
    The effects of moisture and loading on a wood/fiberglass composite wind turbine blade mounting
    Masters, Massachussetts, 1984.
  4762. Joyce Ann Rolls
    A refinement of design: a plastic alternative to steel and glass
    MS, Louisville, 1987. MA1336244. MA 27(4)532.
  4763. Walter Russell Romanko
    Tunnelling-limited conductivity in ordered phthalocyanine/poly(para-phenylene terephthalamide) composite fibres
    PhD, NWU, 1990. DA9031982. DAIB 51(6)3080.
    >>> VMG Romero, see VM Gonzalez Romero.
  4764. J Ronan
    Large deflection of shallow sandwich shell with orthotropic cores
    Masters, Marquette, 1973.
  4765. Andrew Ronnau
    Energy release rate of local delamination in composite laminates
    MS, California State University Long Beach, 1993.  AAD1354529  MA32(3)1004
  4766. M Roovers
    Experimentele en numerieke analyse van GPR laminaten
    [Experimental and numerical analysis of GRP laminates]
    Afstudeerwerk, VUB Brussels, 1983.
  4767. PG Rose
    The preparation of carbon fibres
    PhD, Aston, 1971.
  4768. RG Rose
    Effect of resin flexibility on mechanical properties of glass reinforced polyesters
    PhD, Nottingham, 1971.
  4769. Cheryl Angeline Rose
    An approximate solution for interlaminar stresses in laminated composites
    PhD, University of Virginia, 1992.  AAD9316921  DAIB54(2)927
  4770. RG Rosemeier
    X-ray topography of large polydiacetylene single crystals
    Masters, John Hopkins, 1977.
  4771. BW Rosen
    Thermal expansion coefficients of composite materials
    PhD, Pennsylvania, 1968. DA6905661. N70-19789.
  4772. S Rosen
    Synthesis of spiro orthocarbonates and their effect on toughness and shear strength of continuous carbon fibre/epoxy composites
    MASc, Toronto, 1984.
  4773. M Rosensaft
    Evaluation of bending test methods for composite materials
    MSc, Hebrew Univ-Israel, 1984.
  4774. AA Roshan
    Bolted joints in hybrid composites
    MSc, London: ICST&M, September 1981.
  4775. GR Roshan
    Tongue and slot joint in composite sandwich panels
    PhD, City, 1988. ASLIB 38(2)4097.
  4776. VP Roske
    Vibrations of multicore sandwich beams
    Masters, Oklahoma, 1969.
  4777. H-J Roskothen
    Untersuchungen zur dimensionierung von bauteilen aus kunstoffen
    [Investigation of designs for plastics structural elements]
    Dissertation, TH Aachen, 1974. DS7403.
  4778. Charles N. Rosner
    Single-bolted connections for orthotropic fibre-reinforced composite structural members
    MSc, University of Manitoba, 1992.  AADMM76837  MA31(4)1870
  4779. CA Ross
    Studies on the dynamic compression of composite materials.
    PhD, Florida, 1971. DA7209718.
  4780. GA Rossi
    Buckling analysis of composite sandwich cylinders subject to hydrostatic pressure
    Masters, Rhode Island, 1971.
  4781. GA Rossi
    Free vibrations of a specially orthotropic plate having two opposite sides fixed and two sides free
    PhD, Rhode Island, 1985. DA8600697.
  4782. JY Rossignol
    Sur les materiaux composites ceramique-ceramique a renfort bidirectionel de fibres de carbone et a matrice hybride carbone-carbure ou carbone-nitrure elabores par CVI  [Ceramic-ceramic composites with bidirectional carbon fibres in a hybrid carbide-carbide or carbide-nitride matrix elaborated by CVD]
    Thesis #833, Bordeaux I, March 1985.
  4783. Gholamhossein Rostami
    Surface modification, interfacial testing and matrix processing of fibre reinforced composites
    PhD, Drexel, 1992. DA9220958. DAIB 53(3)1560.
  4784. Roth
    Schwindung von ungesattigen Polyesterharzen [Shrinkage of unsaturated polyester resin]
    Dissertation, RWTH Aachen, 1977. DS7705.
    >>> RJ Rothchilds, see R Rothschilds.
  4785. J Rothe
    Dissertation, Stuttgart, 1972.
  4786. S Rotherham
    The scattering of waves in random media and from rough surfaces
    PhD, Cambridge, July 1982. D52350/84.
  4787. Y Rothschild
    A study of the non-linear deflection behaviour of GRP sandwich panels
    Kungliga Tekniska Hogskolan - Sweden. 1991. KTH Report 91-7
  4788. R Rothschilds
    Characterisation of mode I, mode II and mixed-mode delamination of thermoset and thermoplastic composites
    Masters, Delaware, 1987.
  4789. GE Rotter
    Development of the RIM pultrusion process
    Masters, CWRU, 1988.
  4790. DR Rourke
    Geometric and material nonlinear effects in elastic-plastic and failure analyses of anisotropic laminated structures.
    PhD, VPI&SU, 1986. DA8711003.
  4791. John David Rowatt
    A probabilistic model for fatigue damage accumulation in composite laminates
    MS, Rice University, 1993.  AAD1355261  MA32(3)1051
  4792. JR Roy
    Some equilibrium and stability solutions for laminated aeolotropic plates
    Masters, MIT, 1966.
  4793. RV Roy
    Pultrusion modeling for die design and process control
    PhD, Tufts, 1986.
  4794. S Roy
    A finite element analysis of adhesively bonded composite joints including geometric nonlinearity, nonlinear viscoelasticity, moisture diffusion and delayed failure
    PhD, VPI&SU, 1988. DA8807897.
  4795. Marc Andre Roy
    A design study of graphite/epoxy composite fishing rods
    MSEng, University of Lowell, 1992.  AAD1347895  MA31(1)413
  4796. ME Roylance
    Effect of moisture on the properties of an aramid-epoxy composite
    PhD, MIT, September 1980.
  4797. GA Rozak and JF Wallace
    Stress rupture behaviour of SiC coated low modulus carbon/carbon composites
    Masters, CWRU, January 1988. NASA-CR-180863. N88-14150.
  4798. Gary Alan Rozak
    Effects of processing on the properties of aluminum and magnesium matrix composites
    PhD, Case Western Reserve University, 1993.  AAD9406287  DAIB54(9)4870
  4799. Steven J Rozeveld
    Measurement of residual stress in an aluminium-silicon carbide (w) composite using convergent-beam electron diffraction
    PhD, Carnegie-Mellon, 1991. DA9202920. DAIB 52(8)4413.
  4800. DS Ruberstein
    Research into the mechanisation of in-vivo fragmentation of carbon fibres
    Masters, UIUC, 1981.
  4801. Alexander Michael Rubin
    The effect of porosity on the elastic constants of thin carbon fiber composite laminates
    DSc, Washington University, 1993.  AAD9419041  DAIB55(2)552
  4802. AA Rubtsov
    Determination of critical loads for cylindrical and conical shells in nondestructive testing under external pressure.
    Dissertation, Moscow, 1975.
  4803. GE Ruck
    An experimental investigation of the acoustic attenuation characteristics of two types of composite structural materials.
    Masters, Ohio SU, 1968.
  4804. HJ Rudd
    The effect of hygrothermal history on the sorption and diffusion of water in epoxy resins
    PhD, London: ICST&M, 1987. ASLIB 38(1)1044.
  4805. CD Rudd
    Preform processing for high volume resin transfer moulding
    PhD, Nottingham, September 1989.
  4806. NA Ruddick
    Investigation of a foam supported glass fibre D-box for a rigid wing hang glider
    BS, Bristol, June 1979. BU-240. N80-23302.
  4807. DC Ruhmann
    Strength of composites: effects of stress state, environment and time
    DSc, Washington University-MO, 1974. DA7514935. N75-28136.
  4808. Yuting Rui
    Elastic-plastic behaviour of thermoplastic composites under cyclic loadings
    PhD, Purdue, 1991. DA9201392. DAIB 52(7)3733.
  4809. S Rujikietgumjorn
    Development of predictive models for drilling composite materials
    PhD, Texas TU @ Lubbock, May 1978. DA7819898. N79-12147.
    >>> W Pu Rung, see PR Wen.
  4810. Jane L D Runkle
    Analytical model of the progression of cracking in fiber-reinforced composites
    PhD, Louisiana State University and A&M College, 1993.  AAD9419923  DAIB55(3)1131
  4811. YaYa Rushchitskii
    Investigation of basic problems of mechanics of mixtures of elastic media
    Doctorate, Kiev, 1982.
  4812. JM Rushforth
    The fabrication of silicon carbide whisker/silica matrix composites
    Masters, Alfred, 1987.
  4813. SJ Russell
    Analysis of some elastic stress concentration problems in fibre-reinforced materials
    PhD, Wisconsin, 1969. DA7003686.
  4814. JA Russell
    Surface treatment of graphite fibre for coupling to an epoxy matrix
    Masters, PINY Brooklyn, 1970.
  4815. WB Russell
    Elastic moduli of composite materials containing slender inclusions
    PhD, Stanford, 1973. DA7330467.
  4816. SS Russell
    Signature analysis of acoustic emission from graphite/epoxy composites
    Masters, VPI&SU, June 1977.
  4817. SS Russell
    An investigation of the excitation frequency dependant behaviour of fibre reinforced epoxy composites during vibrothermographic inspection
    PhD, VPI&SU, November 1982. DA8316894.
  4818. KT Russell
    Raman spectroscopic studies of asbestos.
    PhD, Bradford, 1985. D65767/85. ASLIB 35-6149.
  4819. Gerald Wayne Russell
    Evaluation of thermal performance of an epoxy composite using both simplified and complex modelling techniques
    MSE, University of Alabama in Huntsville, 1994.  AADAAI1360546  MA33(4)1329
  4820. Richard Stephen Russell-Floyd
    Acoustic emission and acousto-ultrasonics on aromatic polymer composites
    PhD, University of Bath, 1991.  AADC286877  DAIC54(2)624
  4821. MA Rustum
    Structural characteristics of aligned fibre/matrix space structures
    PhD, Surrey, September 1984. D54212/85.
  4822. PS Rutherford
    Nondestructive stress wave measurement of incipient decay in Douglas fir
    Masters, Washington SU, 1987.
  4823. HL Rutz
    Modelling and optical properties of composites
    Masters, Missouri: Rolla, 1988.
  4824. ME Ryan
    Rheology of polyester and epoxy liquids during cure.
    Masters, McGill, 1973.
  4825. ME Ryan
    The injection moulding of thermosets
    PhD, McGill, 1978.
  4826. RJ Ryan
    The effect of aeroelastic tailoring in the passive control of flutter and divergence in aircraft wings
    MS, Purdue, December 1983.
  4827. AJ Ryan
    Structure-property relationships in poly(urethane-urea)s and polyureas formed by reaction injection moulding (RIM)
    PhD, Manchester: Victoria, 1988.
  4828. W Ryan
    Effect of processing parameters on void content of filament wound cylinders using Taguchi method of experimental design
    Masters, Marquette, 1988.
  4829. SA Rybak
    Vibration of inhomogeneous plates
    Dissertation, Moscow, 1963
  4830. EF Rybicki
    An incremental complementary energy method of nonlinear stress analysis
    PhD, CWRU, February 1968. DA6909433.
  4831. Zoubeir Saad
    Estimation of the kinetic parameters of an amine-epoxy resin during cure
    MS, Michigan SU, 1991. MA1346300. MA 30(3)858.
  4832. DL Saba
    Stress concentration around holes in laminated fibrous composites
    Masters, NPS Monterey, 1975.
  4833. M Saba
    Filament winding with concavity
    MS, RPI, 1987.
  4834. PJ Sabat
    Evaluation of the fibre-matrix interfacial shear strength in fibre-reinforced plastics
    Masters, VPI&SU, 1986.
  4835. E Sabino
    Propagation of ultrasound in inhomogeneous viscoelastic media
    PhD, Surrey, March 1986. D68198/86.
  4836. Mohammad Sabry Ismail Sabry
    The influence of specimen size on the measurement of mechanical properties of fabrics
    PhD, Leeds, February 1988. D88839. ASLIB 39(1)2316. DAIB 51(2)965.
  4837. Zbigniew Sacharuk
    Criteres parametriques de rupture et optimisation des elements en materiaux composites
    [Parametric fracture criteria and element optimisation in composites]
    PhD, Sherbrooke, 1990-91. DA-0384429. AADNN76147  DAIB54(2)989
  4838. S Sadeghipour
    Pressure carrying capacity of filament wound GRP tubes weakened by circular openings
    MSc, UMIST, 1978.
  4839. H Sadid
    Buckling of orthotropic cylindrical shells simply supported at the bottom and subjected to unsymmetrical wind pressure
    Masters, Washington SU, 1984.
  4840. H Sadouki
    Simulation et analyse numerique du comportement mecanique de structures composites
    [Simulation and numerical analysis of mechanical loads in composite structures]
    D.Sci.676, Swiss Federal IT-Lausanne, 1987.
  4841. KJ Saeger
    Damage tolerance of graphite/epoxy cylinders with a high strain to failure matrix system
    Masters, MIT, 1986.
  4842. L Saes
    A study of reaction mechanisms in plasmas related to glass-fibre production
    Doctorate, TH Eindhoven, 1987. ETN-87-90245. N87-28411. DAIC 48/3142.
  4843. CA Saez
    Some fundamental problems in transversely isotropic materials
    Masters, Pittsburgh, 1971.
  4844. D Sage
    <Not composite material thesis>
    Docteur es Sciences, Lyon, 1983.
  4845. A Saggi
    Uniaxial buckling of sandwich structures with composite material facing
    MSc, Technion-IIT Israel, 1974.
  4846. H Saghizadeh
    Delamination fracture toughness and acoustic emission in fibre-reinforced epoxy laminates
    PhD, California: Berkeley, 1987. DA8814048.
  4847. S Saha
    Nuclei of strain in two-dimensional anisotropic elasticity for application to composites
    Masters, Stanford, 1971.
  4848. Sumant Kumar Sahay
    Ultrasonic characterization of the anisotropic behavior of composite materials
    PhD, University of Oklahoma, 1992.  AAD9230138  DAIB53(6)3121
  4849. M Sahebkar-Moghaddam
    Gasphasenabscheidung von siliziumkarbid und Pyrokohlenstoff auf Kohlefasern
    [Gas phase deposition from SiC and pyrolysed carbon to carbon Fibres]
    Dipl.Chem, Karlsruhe, 1973.
  4850. S Sahu
    Fatigue and fracture of glass filled polymer composites.
    PhD, Illinois IT, 1970.
  4851. Kuljeet Singh Saib,
    A study of the general fatigue behaviour of thermoplastics
    MSc, University College of Swansea, 1987.
  4852. Kuljeet S Saib
    <fatigue behaviour of short fibre reinforced PEEK>
    PhD, Wales: Swansea, 1990.
  4853. Seyed Hossein Saidpour
    The effect of fibre/matrix interfacial interactions on the mechanical properties of unidirectional E-glass reinforced vinyl ester composites
    PhD, Loughborough UT, 1991. AADDX96901  DAIB53(6)3101
  4854. S Saigal
    Geometric and material nonlinear dynamic analysis of complex shells
    PhD, Purdue, 1985. DA8606610.
  4855. George Marcel Saint Hilaire:  see GM St Hilaire
  4856. JP Sainty
    Effects of thermal history upon PEEK and PEEK composites
    MSc, Cranfield IT, 1986.
  4857. K Saka
    Dynamic mechanical properties of fibre reinforced plastics
    DPhil, Oxford, February 1987. D81536. ASLIB 38(1)2008 & 38(2)4109.
  4858. Y Sakamoto
    Rubber modified graphite fibre/epoxy laminates
    Masters, MIT, 1987.
  4859. M Sakbani
    Study of the use of fibreglass bars as reinforcement in reinforced concrete structures
    Masters, Texas @ Austin, 1976.
  4860. MMI Salama
    Compressional fatigue crack propagation in graphite fibre reinforced epoxy
    Masters, MIT, 1971.
  4861. MR El-M Salama
    Investigation into the effect of fibre size on the Tribological behaviour of semi-metallic brake material
    PhD, Salford, August 1988. D84979. ASLIB 38(2)4110.
  4862. G Salee
    Fatigue behaviour of short graphite fibres reinforced nylon 66 composites
    PhD, Connecticut, 1976. DA7618999.
  4863. Ahmed Mahmoud Saleh
    Compressive kinking failure of fibrous composites
    PhD, Rensselaer Polytechnic Institute, 1993.  AAD9420355  DAIB55(3)1068
  4864. TE Saliba
    Modelling of heat transfer in advanced composite material during the cure process
    PhD, Dayton, 1986. DA8626418.
  4865. Irene Maria Salin
    Scale-up studies for thermo-oxidative stability of polymeric composites
    PhD, University of Washington, 1994.  AAD9434349  DAIB55(8)3452
  4866. SN Sallam
    Effect of delamination on axially loaded plate and shell like elements
    PhD, Georgia IT, 1985. DA8528639.
  4867. HS Saluja
    Correlation of damage and ultrasonic attenuation in composites
    Masters, VPI&SU, September 1978.
  4868. AP Salzman
    Natural frequencies of orthotropic circular plates of variable thickness
    Masters, PINY Brooklyn, 1968.
  4869. S Samajdar
    <Fracture testing of glass fibre/epoxy laminate>
    ME, IIS Bangalore, January 1988.
  4870. PK Samantaray
    Study of fibre reinforced mortar and investigation of model system for determining the brittle fracture characteristic of composites
    Masters, Maryland, 1972.
  4871. L Samantaraya
    Deflection of composite beams at service loads.
    Masters, Alberta, 1980.
  4872. Reynaldo Estigoy Sampaga
    Mechanical connection studies on a glass fibre reinforced plastic bridge deck
    MS, CSULB, 1991. MA1344560. MA 29(4)688.
  4873. V Sampathkumar
    Effect of seawater immersion on tensile strength of aramid braids
    Masters, Cornell, 1987.
  4874. A Sanadi
    Factors affecting the tensile and impact properties of short carbon fibre composites
    MASc, Toronto, 1984.
  4875. Anand Ramesh Sanadi
    Interphase modification in graphite-epoxy composites
    PhD, Washington SU, 1990. DA9131092. DAIB 52(5)2733.
  4876. E Sancaktar
    The viscoelastic shear behaviour of a structural adhesive
    PhD, VPI&SU, 1979. DA8007947.
  4877. Victor F Sanchez
    Development of composite link cable technology for bridge applications
    MS, California State University, Long Beach, 1994.  AAD1357710  MA33(1)229
  4878. V Sanchez-Moya
    Plane cracks in highly anisotropic bodies
    PhD, Brown, 1975. DA7615706.
  4879. AV Sandalov
    Complex diagnostics of the physicomechanical properties of glass-textolite shells
    Dissertation, Tech.Sci-Riga, 1979
  4880. PL Sandalls
    The influence of the cure cycle upon selected physical properties of a vinyl ester resin
    PhD, Salford, December 1983. D51852/84.
    >>> D van der Sanden, see D Van der Sanden.
  4881. MLG Sander
    Les ouvrages de retenue face aux resines armees [Reinforced plastics in the construction of small dams]
    Dr.Ir, Liege, 1979.
  4882. WJ Sanders
    Computation of natural frequencies of clamped laminated plates using Lagrangian multiplier technique
    Masters, CSULB, May 1983.
  4883. DR Sanders
    A comparison of several creep constitutive theories for prediction of elastic-plastic creep response and their application to finite element analysis
    PhD, TA&MU, 1986. DA8625439.
  4884. Brian Paul Sanders
    Characterization of fatigue damage in a metal matrix composite (silicon carbide fibers/titanium-15-3) at elevated temperature
    PhD, Air Force Institute of Technology, 1993.  AAD9409969  DAIB54(11)5794
  4885. J Sandhu
    Prediction of warpage in FRP components
    MSc, London: ICST&M, September 1984.
  4886. AS Sandhu
    Stress analysis and fracture modelling of carbon/carbon composite interlaminar shear, interlaminar tension and coated tensile specimens
    Masters, Tulsa, 1986.
  4887. JS Sandhu
    Experimental and finite (element?) analysis of composite geodetic shells
    PhD, London: (ICST&M?), 1989.
  4888. BE Sandman
    Polynomial stresses in plane anisotropic beams
    Masters, Kansas SU, 1968.
  4889. J Sandoval Hernandez
    The effects of fibre overlap on the longitudinal strength and stiffness of unidirectional discontinuous fibre composites
    MS, Washington University-MO, 1974.
  4890. Randall R Sands
    Oxidation of silicon carbide fibers in ceramic composites
    PhD, University of Delaware, 1993.  AAD9419523  DAIB55(3)1131
  4891. Donald Allan Sandusky
    Fabrication of thermoplastic polymer composite ribbon
    PhD, College of William & Mary, 1995.  AADAAI9537551  DAB56(7)3965
  4892. WM Sanford
    Cure behaviour of thermosetting resin composites
    PhD, Delaware, 1987. DA8808054.
  4893. Padaki Sanjay
    Powder processing of composite prepreg tape:  particle size effects
    MS, Michigan State University, 1992.  AAD1349077  MA31(1)368
  4894. NG Sankar
    Unload emission behaviour of materials and its relation to the Bauschinger effect
    PhD, Michigan, 1969.
  4895. BV Sankar
    Contact behaviour, impact response and damage in graphite/epoxy laminates subjected to initial stresses
    PhD, Purdue, May 1984. DA8423421. N85-17386.
  4896. M Sanou
    Cavity filling and fibre orientation in the injection moulding of fibre filled thermoplastics
    Masters, Cornell, 1983.
    >>> DMD Santo, see DM Di-Santo.
  4897. Adel Saoudi
    Design of an experimental chamber for the new powder metallurgy technique to make continuous fiber metal-matrix composites
    MS, Michigan State University, 1994.  AADAAI1361355  MA33(5)1569
  4898. B Sarabi
    Das anstrengungsverhalten von Polymerwerkstoffen infolge ein- und zweiachsigen Kriechens Ermittlung von Langzeitbemessungskennwerten [Stress-strain behaviour of polymeric materials in uni- and biaxial creep studied by duration rating characteristic curve]
    Dr.Ing, Inst.Werkstofftechnik-Kassel, 11 May 1984.
  4899. AN Sarabia
    Plasma surface treatment of poly(phenylene sulphide) and poly(ether ether ketone) prior to adhesive bonding
    Masters, MIT, 1987.
  4900. DA Saravanos
    Structural optimisation of robotic manipulators with fibre reinforced composite materials
    PhD, Pennsylvania SU, 1988. DA8818048. DAIB 49(7)2819.
  4901. JP Sargent
    The linear thermal expansion coefficients of composites based upon carbon fibres
    PhD, Salford, 1978.
  4902. BP Sarkar
    A study of woven structures
    PhD, Manchester, October 1977. D65727/86.
  4903. K Sarkar
    Failure and fracture analysis of brittle ductile composite using computer simulation method
    PhD, Tennessee @ Knoxville, 1980. DA8024928
  4904. NE Sarkisyan
    Experimental examination of the anisotropy of cyclic strength, strain capacity and heating of laminated plastics.
    Dissertation, Tech.Sci.Erevan, 1971.
  4905. Satyendra Kumar Sarmah
    The effect of electrochemical treatment on the morphology and surface chemistry of pitch-precursor carbon fibers
    PhD, University of Wyoming, 1994.  AADAAI9524544  DAB56(4)2286
  4906. V Saseendran
    Performance characteristics of fibre reinforced plastics under under dynamic loads
    MTech, IIT-Madras, 1978.
  4907. Ann Marie Sastry
    Calculation of stress concentrations in damaged composite solids for determining strength distributions
    PhD, Cornell University, 1994.  AAD9422837  DAIB55(4)1632
  4908. Tariq Sattar
    Finite element modelling of orthotropic plate stringer structures
    ME, Cooper Union for the Advancement of Science and Art (NY), 1991. MA1343798. MA 29(4)688.
  4909. K Satyamurthy
    On the buckling behaviour of fibre reinforced plates - a finite difference solution
    Masters, Clemson, 1976.
  4910. K Satyamurthy
    Collapse load analysis for plates and panels.
    PhD, Clemson, 1979. DA8003339.
  4911. WJ Saunders
    Computation of natural frequencies of clamped laminated plates using Lagrangian multiplier technique
    Masters, California SU, May 1983.
  4912. JW Sawyer
    Flutter of laminated plates in supersonic flow
    PhD, VPI&SU, 1975. DA7611272.
  4913. Romuald Sawicz
    Bounds on effective parameters of composite materials by the analytic continuation method
    PhD, University of Utah, 1995.  AADAAI9532816  DAB56(5)2667.
  4914. AF Sayegh
    Analysis of laminated curved beam
    Masters, UCLA, 1969.
  4915. Linda Sue Schadler
    A study of the micromechanics of the fibre-matrix interphase in monofilament composites in monotonic and cyclic fatigue
    PhD, Pennsylvania, 1990. DA9101214. DAIB 51(8)4010.
  4916. Jon Conrad Schaeffer
    Oxidation behaviour of carbon-carbon composites and their coatings
    PhD, Pittsburgh, 1989. DA9021452. DAIB 51(6)3080.
  4917. ED Schafer
    Micromechanical predictions of debonding, crack propagation and fracture energy in a particulate composite
    Masters, Wyoming, 1986.
  4918. BG Schaffer
    Nonlinear viscoelastic behaviour of composite material using finite element micromechanical analysis
    Masters, Wyoming, 1980.
  4919. KR Schaffer
    Characterisation of a cured epoxy resin exposed to high energy radiation with electron spin resonance
    MS, NCSU Raleigh, 1981. BLDSC 84/15441.
  4920. Richard Lee Schalek
    The adhesion of ion beam irradiated ultra-high molecular weight polyethylene to epoxy matrices
    MS, Michigan State University, 1992.  AAD1347747  MA30(4)1454
  4921. R Schaller
    Propagation of cylindrical shear waves in nonhomogeneous elastic media
    Masters, Drexel, 1966.
  4922. RA Schamber
    Plain strain composite analysis including edge effects of layered systems
    Masters, California: Davis, 1980.
  4923. U Schanz
    Bestimmung der Rissantriebskraft fur delaminierende Flachproben aus Faserverbundwerkstoffen
    [Fracture mechanics of flat delaminations in fibre composites]
    Studienarbeit, Stuttgart, 1987.
  4924. H Schaper
    Beitrag zur zerstorungsfreien Prufung von glasfaserverstarkten Kunststoffe
    [Study of nondestructive testing of glass fibre reinforced plastic]
    Dissertation, TH Hannover, 1966. D89.
  4925. John Lorin Scharf
    Out-of-plane bending of cord-rubber laminates
    PhD, Notre Dame, 1990. DA9024239. DAIB 51(4)1967.
  4926. G Scharr
    Messungen der Elastizitaetzahlen und Warmeausdehnungskoeffizienten von faserverstaerkten Kunststoffen
    [Measurement of Young's modulus and coefficient of thermal expansion of fibre reinforced plastics]
    Dissertation, Germany (not IKV), 1984.
  4927. RT Schaum
    Development of a nondestructive testing technique for advanced composite materials using cholesteric liquid crystals.
    MS, NPS Monterey, September 1976. AD A032 322. N77-22501.
  4928. WA Scheffler
    Two-dimensional steady state heat conduction in composite solids
    Masters, Tulane, 1966.
  4929. Johannes Cornelis Jacobus Schellekens
    Computational strategies for composite structures
    Dr, Technische Universiteit te Delft, 1992.  AADC313405  DAIC54(4)1261 
  4930. KE Scher
    Comparison of wicking and single filament techniques for determining contact angles
    Masters, University of Washington-WA, 1983.
  4931. ER Scheyhing
    Model analysis of elastic shells using glass reinforced plastics
    DEng, Yale, June 1965. DA7020656.
  4932. Isabelle Schiavon
    Suivi de l'endommagement en fatigue d'un composite verre-epoxyde unidirectionnel par mesures mechaniqes et emission acoustique [Fatigue damage of a unidirectional glass/epoxy composite controlled by mechanical measurements and acoustic emission]
    Doctorate, INSA Lyon, 1989. DAC080058. DAIC 50(3)574.
  4933. JE Schiermeier
    Numerical analysis of stress singularities in composite materials
    Masters, Washington Univ - MO, 1987.
  4934. JR Schiffhauer
    Large deflection bending analysis of laminates.
    Masters, MIT, 1982.
  4935. W Schijve
    Investigation of ARALL in the fuselage structure of the Airbus A320
    Thesis, Delft UT, August 1983. In Dutch.
  4936. DR Schlater
    Acoustic wave attenuation in a two-phase medium.
    Masters, Tulane, 1967.
  4937. B Schlehofer
    Beitrag zur Wickeltechnik und zum Werkstoffverhalten glasfaserverstarkter Hohlkorper unter Innen- und Axialdruck [Contribution on winding technology and rawmaterial state in glass fibre reinforced body with holes under axial and internal pressure].
    Dissertation, TU Hannover, 1972.
  4938. B Schlund
    <glass transition of the fibre resin interface>.
    DIng, EAHP: Univ.Louis Pasteur-Strasbourg, 1984.
  4939. E Schmelzer
    Entwicklung und Fertigung von SMC-Bauteilen [Development and manufacture of SMC components]
    Dissertation, RWTH Aachen, 1986.
  4940. MJ Schmenck
    A photoelastic investigation of composite materials.
    Masters, Tennessee, 1967.
  4941. LR Schmidt
    Viscoelastic effects in the capillary extrusion of glass filled polyethylene
    Masters, Washington University-MO, 1969.
  4942. P Schmidt
    Verhalten von verbundsystemen aus chemikalienbestandigen plastomer und glasfaserverstarkten ungesattigten polyesterharzen [On the condition of composite systems as chemical resistant plastomers and glassfibre reinforced unsaturated polyester resin]
    Dissertation, RWTH Aachen, 1969. DS7002.
  4943. H Schmidt
    Fracture toughness of reinforced plastic composite materials
    Masters, MIT, 1970.
  4944. H Schmidt
    Untersuchungen der fliesszonenbildung und des mechanischen langzeitverhaltens von thermoplastischen kunststoffen bei ein- und zweiachsig wirkenden zugbeanspruchtungen [Investigation of flow zone formation and the mechanics of long term behaviour in thermoplastic under uni- and bi-axial tension]
    Dissertation, TH Aachen, 1970/1.
  4945. DC Schmidt
    Ultrasonic wave propagation in continuously fibre reinforced materials
    Masters, Lowell, 1973.
  4946. P Schmitz
    Untersuchungen am schmelzgesponnenen Fader aus Polymer-mischungen mit flussig-kristalliner Komponente
    [Investigation of melt-spun fibres from mixtures with a liquid crystalline component]
    Diplomum, TU Berlin, 1989.
  4947. William Clark Schnaidt
    On the local and global instability of a class of two dimensional periodic composite structures
    PhD, University of Michigan, 1995.  AADAAI9527736  DAB56(4)2159.
  4948. W Schneider
    Lebensdauer dunnschichtiger duromeruberzuge unter starkte chemikalienbeanspruchung
    [Durability of a thin layer duromer coating under strong chemical stressing]
    Dissertation, TH Aachen, 1973. DS7306.
  4949. W Schneider
    Mikromechanische betractung von bruchkriterien unidirektional verstarkter schichten aus glasfaser/kunststoffe
    [Micromechanics of failure criteria in unidirectional reinforced layers of glassfibre/plastics]
    Doctorate, TH Darmstadt, 1974.
  4950. DR Schneider
    Evaluation of the three parameter Weibull distribution function for predicting fracture probability in composite materials
    Masters, AFIT WPAFB, March 1978. AFIT/GAE/AA/78M-14. AD A056 510.
  4951. CM Schoene
    Effect of matrix ductility on copper-zinc/tungsten fibre composites
    Masters, Cornell, 1968.
  4952. Gregory Alan Schoeppner
    A stress-based theory describing the dynamic behaviour of laminated plates
    PhD, Ohio SU, 1991. DA9130551. DAIB 52(5)2641.
  4953. AW Schollett
    Finite element analysis of a reinforced timber beam stressed to flexural failure
    Masters, Michigan TU, 1970.
  4954. Johan Scholliers
    Robotic filament winding of asymmetric composite parts
    PhD, Katholieke Universiteit Leuven - Belgium, 1992.  AADC299280  DAIC54(3)941
  4955. SV Schoultz
    Techniques of obtaining ultra-high strength boron fibres
    Masters, Virginia, 1978.
  4956. J Schramm
    Einfluss von Microholraeumen auf die Elektrische Festigkeit Glasfaserverstaerkter Epoxidharz-Formstoffe
    [Influence of microvoids on the electrical strength of glass fibre reinforced epoxy resins]
    Doctorate, TU Braunschweig FRG, 1985. ETN-87-90443. N88-10189. In German.
  4957. U Schriever
    Dissertation, TU Berlin, 1981, D-83.
  4958. RD Schueller
    Effects of hot rolling and high temperature on aluminium-2124 silicon carbide whisker composites
    Masters, Virginia, 1988.
  4959. JP Schuldt
    Nondestructive parameters for the tensile properties of lodgepole pine dimension lumber
    MS, Colorado SU, 1970.
  4960. K Schulgasser
    Macroscopic behaviour of heterogeneous hereditary media
    PhD, Pennsylvania, 1967. DA6809234.
  4961. WJ Schulz
    Fracture toughness of fibreglass reinforced plastics.
    Masters, MIT, 1969.
  4962. CJ Schulz
    The frictional behaviour of graphite fibre aluminium matrix composites under conditions of constant deceleration.
    Masters, Texas @ Austin, 1978.
  4963. Donald Wayne Schultz
    Micromechanical analysis of composite materials applying kinematic conditions and superelements
    MS, California State University Long Beach, 1992.  AAD1349696  MA31(1)426
  4964. EJ Schulze
    The elastic-viscoplastic analysis of a sandwich composite structure subject to thermal cycling
    Masters, Delaware, 1986.
  4965. JB Schutz
    Effects of spherical fillers on the viscosity of short-fibre reinforced plastics
    Thesis, MIT Cambridge & Los Alamos Nat.Lab, July 1982. LA-9447-T. DE82021843. N83-24705.
  4966. James Branch Schutz
    Test methods and analysis for glass-ceramic matrix composites
    PhD, MIT, 1991. DA-570556. DAIB 52(7)3847.
  4967. HJ Schwalbe
    Risszahigkeit glasfaserverstarkter kunststoffe [Fracture toughness of glass fibre reinforced plastics]
    DEng, RWTH Aachen, 13 February 1981. DS8111.
  4968. Cheryl Ann Schwalm
    Effects of fibres on the cure characteristics of carbon-reinforced epoxy composites
    MS, Michigan SU, 1989. MA1339463. MA28(3)442.
  4969. S Schwartz
    Thermal analysis of a thin transversely-anisotropic flat circular plate
    Masters, PINY Brooklyn, 1968.
  4970. D Schwartz
    The mechanical properties of fabrics having three non-orthogonal thread directions (triaxial) and the equivalence of conventional fabrics
    PhD, NCSU Raleigh, 1981.
  4971. MR Schwartz
    Stress-strain behaviour of wavy reinforcements and their composites
    Masters, NCSU Raleigh, 1987.
  4972. RW Schwarz
    Non-linear analysis of axisymmetrically loaded orthotropic shells of revolution
    Masters, San Diego State Coll, 1965.
  4973. O Schwarz
    Beitrag zum statischen langzeitverhalten glasfaserstarkte kunststoffe
    [Contribution on static creep of glassfibre reinforced plastics]
    Dissertation, RWTH Aachen, 1968.
  4974. JD Schwarz
    Identification of nonclassical aeroelastic responses using bispectral analysis
    Masters, Texas @ Austin, 1988.
  4975. Stephen W Schwenker
    Longitudinal-creep behavior of fiber-reinforced titanium-matrix composites
    PhD, University of Dayton, 1994.  AADAAI9521242  DAB56(3)1655.
  4976. Hendrick Reiner Schwietert
    Prediction of the ultimate tesnsile strength of a fibre-reinforced ceramic
    PhD, Carnegie-Mellon, 1990. DA9026781. DAIB 51(5)2448.
  4977. Michael Paul Schwind
    Design study of a composite aircraft control surface
    MS, University of Texas at Artlington, 1992.  AAD1351772  MA31(3)1282
  4978. JM Scigliano
    Considerations of complex solutions using internal pressure measurements
    DSc, Washington University-MO, 1971.
  4979. James Joseph Scobbo
    Rheology, processing and mechanical properties of thermoplastic/graphite fibre composites
    PhD, Akron, 1989. DA9013755. DAIB 50(12)5831.
  4980. CE Scott
    Application of analytical characterisation techniques to reaction injection moulding and multicomponent matrix/rubber/filler polymer composites
    Masters, CWRU, 1986.
  4981. IL Scott
    Intramolecular ring opening of epoxides
    MPhil, Sheffield, 1987. ASLIB 38(1)1132.
  4982. FN Scott
    Processing characteristics of polyester resins for the resin transfer moulding process
    PhD, Nottingham, 1988.
  4983. Elaine Patricia Scott
    Estimation of the thermal and kinetic properties associated with carbon/epoxy composite materials during and after curing
    PhD, Michigan SU, 1990. DA9028682. DAIB 51(5)2547.
  4984. CF Scribner
    Experimental determinations of strain concentrations near an unreinforced hole in orthotropic shells
    Masters, Massachusetts, 1973.
  4985. Gary Carl Scrivner
    Effects of stress ratio on edge delamination characteristics in laminated composites
    MS, Texas @ Arlington, 1991. MA1344966. MA 30(1)137.
  4986. F Scuderi
    The effects of the concentration of catalyst and curing agent on the kinetics of curing and the properties of epoxy laminates
    Masters, RPI, 1985.
  4987. MH Seah
    The behaviour of welded aluminium alloy plate girders reinforced with carbon fibre reinforced plastics.
    MSc, Wales: Cardiff, 1984. ASLIB 36-2082.
  4988. JB Seamon
    Diffusion and reactions in titanium matrix-boron filament composites
    Masters, AFIT, 1965.
  4989. CP Seaton
    Analysis of a buffer strip laminate with fibre and matrix damage and interlaminar debonding
    MS, Missouri-Rolla, 1984.
  4990. Frank Mehdi Sedaghati
    Quantitative measurement of elements in a composite using multi-energy gamma-rays
    PhD, Lowell, 1989. DA9000409. DAIB 50(8)3347.
  4991. Inge Sedeyn
    Acoustic emission of PE/C hybrids
    Dissertation, KIHWV Oostende, no date.
  4992. A Seerat-un-Nabi
    Fracture in brittle matrix composites
    MSc, Oxford, 1989. ASLIB 38(4)8448.
  4993. G Segol
    An experimental study of the heat generated during cyclic deformation of glass/epoxy composites
    Masters, Princeton, 1970.
  4994. JF Seibert
    Diminution and longitudinal splitting of carbon fibres due to grinding
    Masters, AFIT @ WPAFB, 1988.
  4995. JL Seichepine
    Mise au point d'une methode experimentale destinee a l'identification de la matrice des complaisances elastiques des solides anisotropies
    [Experimental method to determine the elastic compliance matrix of anisotropic solids: application to wooden materials]
    DIng, INPL-Nancy, 1980.
  4996. GR Seifert
    Effect of centre delamination on the instability of composite cylindrical panels
    Masters, AFIT, December 1984. AFIT/GAE/AA/84D-25. AD A153 494. N85-28979.
  4997. U Seiler
    Zur auslegung statisch und dynamisch belaster Bauteile aus Verbundwerkstoffen am Beispiel von GFK-Blattfedern [Static and dynamically loaded composites: GFRP leaf spring]
    Dissertation, RWTH Aachen, 1987.
  4998. MP Seiner
    Stress field sensitivity of a composite patch repair due to varying patch thickness
    Thesis, California State University - Sacramento, 1990
  4999. Timothy J Seitz
    Formulation of a structural model for flutter analysis of low aspect ratio composite aircraft wings
    PhD, Virginia Polytechnic Institute and State University, 1992.  AAD9301017  DAIB53(8)4235
  5000. K Selby
    A study of the fracture, mechanical behaviour and morphology of an epoxy resin system
    PhD, Loughborough UT, 1976. D18530/77.
  5001. LN Seleznev
    Technological optimisation of chord winding of flat fiberglass discs
    Dissertation, Tech.Sci-Riga, 1979.
  5002. Claudio Sellitti
    Surface characterization of carbon fibres and interfacial phenomena in carbon reinforced composites
    PhD, CWRU, 1990. DA9021354. DAIB 51(3)1298.
  5003. W Semar
    Herstellung SiC-faserverstaerkter Glasverbundkoerper durch das Strangpressverfahren und Untersuchung ihrer charakteristischen mechanischen Eigenschaften [Manufacture of SiC-fibre reinforced compound glass bodies by the extension process and study of their characteristic mechanical properties]
    Dr.Ing, Kaiserlauten-FRG,30 May 1986. TIB/B87-82019.
  5004. GM Semenovich
    Spectral studies of the effect of the interphase boundary between a polymer and a solid on structure of polymer boundary layers
    Chemical Science degree, Kiev, 1975.
  5005. AE Semple
    Improvements to the transfer function method for determining the complex dynamic modulus of polymer composites.
    Masters, Pennsylvania SU, 1985.
  5006. BC Sen
    Elastic properties of bonded fibre networks
    Masters, Syracuse, 1977.
  5007. JK Sen
    Stress analysis of double-lap joints bonded with a viscoelastic adhesive
    PhD, S.Methodist, May 1977. DA7718606.
  5008. Arcangelo Gabriele Sena
    Elastic wave propagation in anisotropic media:  source theory, traveltime computations and migration
    PhD, Massachusetts Institute of Technology, 1992.  AAD0572181  DAIB53(6)2754
  5009. Lyle Scott Sendlein
    Investigation of debonding failures in sandwich constructions
    MS, Florida Atlantic, 1989. MA1336924. MA 28(1)151.
  5010. A Senftleben
    Geometric nonlinear analysis of circular cylindrical shells
    Masters, Alberta, 1982.
  5011. Simon Dele Senibi
    Multiaxial performace of braided preforms consolidated by resin transfer molding process
    PhD, North Carolina State University at Raleigh, 1994.  AAD9434042  DAIB55(10)4572
  5012. S Senivongse
    Analysis of laminated structures by three-dimensional finite element method
    Masters, Tennessee TU, 1981.
  5013. Erol Senocak
    Contributions to the design of neutral cutouts in laminated plates and shells
    PhD, University of Michigan, 1994.  AAD9423314  DAIB55(4)1532
  5014. David James Senor
    High-fiber volume fraction metal matrix composites cast under bi-dimensional compression
    PhD, Texas A&M University, 1992.  AAD9315138  DAIB54(1)460
  5015. M Sentovich
    Forming ordered staple thermoplastic composites
    SM, MIT, June 1989.
  5016. HA Senyilmaz
    Fabrication of "Tetra-Core" panels
    MSc, Loughborough, 1976.
  5017. KS Seo
    Electron spin resonance investigations and surface characterisation of TGDDM-DDS epoxy and T-300 graphite fibre exposed to ionizing radiation
    PhD, NCSU Raleigh, 1985. DA8608046. N86-17476.
  5018. Kyeongwon Seol
    Microstructural effects on the residual stress and stress distribution in WC-Ni composites
    PhD, Missouri: Rolla, 1990. DA9100235. DAIB 51(8)4010.
  5019. KJ Seppanen
    Effects of failure paths on reliability of a redundant structure
    S.M, MIT, June 1974.
  5020. RA Seppi
    A stability envelope for the general orthotropic elastic plate
    Masters, Michigan TU, 1967.
  5021. SM Serabian
    Comparisons of finite element predictions with experimental results for 0/90 pin-loaded laminates.
    Masters, Lowell, Fall 1985.
  5022. Steven Martin Serabian
    An experimental and finite element investigation into the nonlinear material behaviour of pin-loaded composite laminates
    DEng, Lowell, 1990. DA9015667. DAIB 51(1)393.
    >>> Aicha Chaoui Serier, see A Chaoui-Serier.
  5023. A Servoz
    Postbuckling study of carbon-epoxy specimens
    Masters, RPI, 1979.
  5024. Ashok Kumar Seth
    Filament blending in air jet texturing
    PhD, Leeds, 1988. D87314. DAIB 50(10)4754.
  5025. SS Sethee
    The bending of orthotropic and corrugated cylindrical shells
    PhD, Toronto-Canada, 1974.
  5026. PL Seveno
    Investigation of the acoustic pulse intensity generated by breaking textile fibres
    Masters, Clemson, 1970.
  5027. AE-FM Seyam
    On the mechanics of woven fabrics
    PhD, NCSU, 1985. DA8529452.
  5028. SM Seyed-Ranjbari
    Analytical solutions of layered composite problem including edge effects
    Masters, California: Davis, 1981.
  5029. JE Seymour
    Crosslinking and network formation in a model polymeric system
    PhD, Liverpool, June 1987. DX83425. ASLIB 37(4)7254.
  5030. Khaliq Ur-Rehman Shad
    A separation technique for asymptotic-numeric solution for general shells of revolution
    PhD, Stanford University, 1993.  AAD9326558  DAIB54(5)2642
  5031. NA-H Shafey
    Nonlinear wave propogation in heterogeneous anisotropic plates
    PhD, Purdue, 1974. DA7510962.
  5032. F Shafigh-Nobari
    Plane strain non-linear finite element analysis of a class of layered composites
    Masters, California: Davis, 1987.
  5033. AM Shah
    Orthotropic shells of double curvature
    Masters, Lowell, 1973.
  5034. MR Shah
    Elastic field in inhomogeneous materials using Galerkin's method- an improved algorithm
    Masters, Texas @ Arlington, 1986.
  5035. RS Shah
    Elastic-plastic analysis of thermomechanical loading of fibrous composites
    Masters, RPI, 1986.
  5036. Ketan Vasantlal Shah
    Effect of glass fibre orientation on the thermal conductivity and thermal diffusivity of polymer melts
    MSEng, Lowell, 1990. DA1340641. MA28(4)635.
  5037. Mihir Mahendra Shah
    Microstructural study of vapour-deposited nickel/ceramic composites
    PhD, UIUC, 1990. DA9021755. DAIB 51(3)1447.
  5038. Rahul S Shah
    Modelling and analysis of high-temperature inelastic deformation in metal matrix composites
    PhD, RPI, 1991. DA9202212. DAIB 52(8)4302.
  5039. Gaurang V Shah
    Toughened composites for personal safety
    DEng, Lowell, 1992. DA9224567. DAIB 53(4)2041.
  5040. Ashish P Shah
    A study of coefficients of linear thermal expansion of reinforced engineering thermoplastics
    MSEng, University of Massachusetts - Lowell, 1993.  AAD1354393  MA32(2)719
  5041. Kaushal Harshad Shah
    Experimental investigation of damped composite tubes using shear coupling
    MS, Utah State University, 1994.  AADAAI1374738  MA33(6)1928
  5042. Muhammad Shahid
    The corrosion and anodizing behaviour of aluminium alloy/silicon carbide composite
    PhD, Manchester Victoria, 1990. D96021. DAIB 53(3)1580.
  5043. M Mohsin Iqbal Shahid
    Progressive failure analysis of laminated composites subjected to in-plane tensile and shear loads
    PhD, Stanford University, 1993.  AAD9404015  DAIB54(9)4794
  5044. EG Shahidi
    Bending to failure of GRP curved bars
    MSc, UMIST, 1982.
  5045. AA Shahpurwala
    The use of statistical methods to understand and predict the tensile failure of woven fabrics
    Masters, Cornell, 1987.
  5046. Khaled Williams Shahwan
    Buckling, postbuckling and non-self-similar decohesion along the finite interface of unilaterally constrained delaminations in composites
    PhD, University of Michigan, 1995.  AADAAI9527741  DAB56(4)2159.
  5047. RJA Shalash
    Effect of water on the physical properties of epoxides
    PhD, CNAA: Leicester/Bostik, 1979.
  5048. SM Shaler
    The usefulness of selected polymer composite theories to predict the elastic moduli of oriented flakeboard.
    PhD, Pennsylvania SU, 1986. DA8705413.
  5049. Doron Shalev
    Prediction model for the onset of edge-effect delamination at holes in composite laminates
    PhD, VPI&SU, July 1988. DA8825339. DAIB 49(8)3289.
  5050. CL Shambarger
    Pull-out of fibres embedded in rubber: some model experiments
    Masters, Akron, 1975.
  5051. Mahmoud Shams-Ahmadi
    Complex variable boundary element method for composite bars under torsion
    PhD, University of Nebraska - Lincoln, 1992.  AAD9233416  DAIB53(7)3734
  5052. Shaye-Wen Shang
    Quantitative studies of the effects of interfacial bonding strength on the mechanical and rheological properties of polymer composites
    PhD, Florida, 1989. DA9021912. DAIB 51(3)1447.
  5053. P Shankar
    Postbuckling analysis of laminated, anisotropic plates using successive bifurcations
    PhD, CWRU, 1973. DA7402563.
  5054. FW Shanks
    Tensile properties of steel filament composite materials.
    Masters, Tennessee TU, 1970.
  5055. A Shapiro
    Some aspects of fabric mechanics
    Masters, University of Washington-WA, 1966.
  5056. E Shapiro
    Adhesion and thermocycle performance of metals electroplated with mica reinforced plastics
    Masters, Toronto, 1975.
  5057. AN Sharda
    3-D graphite fibre reinforced polymer composites for orthopaedic applications
    Masters, Drexel, 1988.
  5058. Asutosh Naevendra Sharda
    A self-anchoring three-dimensional braid-reinforced composite for orthopedic implants
    PhD, Drexel University, 1993.  AAD9417937  DAIB55(1)6656
  5059. Farhad Sharif
    A new method for mode III delamination characterization in laminated composites
    MASc, University of Toronto, 1994.  AADAAIMM92374 MA33(3)919
  5060. MY Sharkas
    The initial load-extension properties of 2/2 twill woven fabrics
    PhD, Leeds, 1987. D81252.
  5061. Timothy Lee Sharkey
    Variables affecting interlayer adhesion in multilayer laminate structures
    MS, Michigan State University, 1992.  AAD1347749  MA30(4)1470
  5062. AV Sharma
    Characterisation and stress analyses of composite viscoelastic materials
    PhD, Pennsylvania SU, 1966. DA6705963. N68-20639.
  5063. SC Sharma
    Analysis of graphite fibre surfaces by solid-liquid chromatography
    PhD, CWRU, 1973. DA7316157.
  5064. NK Sharma
    Silica in rice hulls and conversion to silicon carbide [whiskers]
    MS, UIUC, 1976.
  5065. SK Sharma
    Finite element weighted residual methods for static analysis of reinforced axisymmetric shells
    PhD, UIUC, 1977. DA7726749.
  5066. JR Sharp
    Reinforced thermoplastic hybrid composites
    PhD, Brunel, November 1982. D45528/83.
  5067. DA Sharp
    Computer monitoring and analysis of thermoset injection moulding
    PhD, Bradford, October 1986. D73201/87.
  5068. BPM Sharples
    The structural behaviour of composite columns
    PhD, Cambridge, 1971-72.
  5069. JJ Shaw
    Plastic tensile instability in orthotropic sheets subjected to biaxial loading at arbitrary orientation
    Masters, Oklahoma, 1968.
  5070. KG Shaw
    Fracture path determination using finite element method.
    PhD, Nottingham, 1975.
  5071. L Shaw
    Dynamic loading of fibre-reinforced beams and plates
    PhD, Nottingham, 1977-8. D24576/78.
  5072. DW Shaw
    Finite element determination of Ki for a completely interdigitated bimaterial interface crack
    MS, NWU, 1982.
  5073. D Shaw
    Nonlinear analysis of imperfect, laminated, thin-wall cylindrical shells
    PhD, Georgia IT, 1983. DA8315361.
  5074. Michael Christopher Shaw
    The fracture behavior of multilayered and fibrous ceramic/metal composites
    PhD, University of California - Santa Barbara, 1993.  AAD9419110  DAIB55(2)552
  5075. Siu-Nang She
    Flexible composite tubular structure
    MSc, University of Alberta, 1994.  AADAAIMM95111  MA33(5)1576
  5076. PA Sheard
    Transverse and environmental cracking of glass fibre reinforced plastics
    PhD, Surrey, November 1986. D72947/87. ASLIB 39(1)1948.
  5077. RL Sheen
    Experimental measurements of material damping for space structures in simulated zero-g
    Masters, AFIT @ WPAFB, December 1983. Masters, MIT, 1984
    AFIT/CI/NR-83-84T. AD A139 215. N84-23703.
  5078. J Sheen
    Optimal cure cycle design for autoclave processing of thick composite laminate
    Masters, Old Dominion, 1985.
  5079. AW Sheffler
    A compact finite element method for the analysis of anisotropic laminated plates
    PhD, W.Virginia, 1973. DA7323890.
  5080. EM Shefter
    Temperature and stress fields in irradiated solids.
    Dissertation, Moscow, 1970.
  5081. AW Sheikh
    Effect of internal joints on the mechanical behaviour of glass reinforced polyesters
    Masters, Boston, 1973.
  5082. TH Shen
    Structure studies of carbon fibres
    Masters, RPI, 1980.
  5083. YC Shen
    Structure-property and residual stress characteristics in epoxy resin system
    Masters, Tennessee @ Knoxville, 1981.
  5084. MH Shen
    Large amplitude free flexural vibrations of laminated composite plates of arbitrary shape
    Masters, Old Dominion, 1983.
  5085. Guowu Shen
    Fatigue life prediction of composites based on microstress analysis
    PhD, University of Waterloo - Canada, 1993.  AADNN81217  DAIB54(8)4354
  5086. Yu-Lin Shen
    Micromechanical modeling of deformation in metal-ceramic composites
    PhD, Brown University, 1994.  AAD9433445  DAIB55(7)2961
  5087. Lu Shen
    A study of interface coatings for fiber reinforced ceramic matrix composites
    PhD, University of Connecticut, 1994.  AADAAI9520030  DAB56(2)817.
  5088. PS Shenberger
    Optimum fracture toughness of fibre reinforced composites
    Masters, Lehigh, 1971.
  5089. JY Sheng
    The kinetics and mechanism studies of cathodic electroinitiated crosslinking polymerisation of unsaturated polyester prepolymer
    Masters, NJIT, 1987.
    >>> Sheng Liu, see S Liu.
    >>> NF Shepard, see NF Sheppard
  5090. NF Sheppard
    Electrical monitoring of epoxy resin polymerisation.
    MS, MIT, 1981.
  5091. Norman F Sheppard
    Dielectric analysis of cure of thermosetting epoxy/amine systems
    PhD, MIT(EE), 1985.
  5092. Dov Sherman
    The mechanical behavior of brittle ductile laminated system
    PhD, University of California - Santa Barbara, 1992.  AAD9237833  DAIB53(8)4333
  5093. Mark Alexander Sherrouse
    Analysis & testing of composite sandwich shell aircraft structures
    MS, Mississippi SU, 1990. MA1342043. MA 29(2)294.
  5094. PM Shete
    Investigation of fracture characteristics of a brittle matrix-ductile fibre composite of maraging steels
    Masters, Cincinnati, 1970.
  5095. PJ Sheth
    Wear and degradation of polymers and polymeric composite materials
    PhD, Connecticut, 1977. DA7731220.
  5096. YA Sheth
    Sandinates (sandwich panels)
    Masters, Toronto, 1979.
  5097. T-Y Shi
    Polyester fibre/multi-fibre reinforced polystyrene
    Masters, Lowell, 1975.
  5098. Ning Shi
    Thermo-mechanical behavior of silicon carbide/aluminum discontinuously reinforced composites
    PhD, University of Maryland, 1992.  AAD9234654  DAIB53(7)3716
  5099. HC Shiao
    Physical and mechanical properties of an advanced ceramic composite TiB2-ZrO2
    Masters, Texas: El Paso, 1988.
  5100. Ming-Liang Shiao
    The roles of matrices and glass fibers on the deformation and fracture of short glass fiber reinforced thermoplastics
    PhD, University of Massachusetts, 1993.  AAD9408349  DAIB54(10)5345
  5101. S-F Shiau
    A nonlinear theory of bending and buckling of thin orthotropic elastic shallow spherical shells
    Masters, Tennessee TU, 1970.
  5102. PT-K Shih
    Raman studies of glass reinforced polyester composites.
    PhD, CWRU, 1973. DA7316159.
  5103. MT Shih
    Transient hygrothermal stress in composites-coupling of moisture and heat with temperature varying diffusivity
    Masters, Lehigh, 1979.
  5104. MT Shih
    Coupled diffusion and deformation theory: hygrothermalstress distribution around crack like defects
    PhD, Lehigh, 1983. DA8317139.
  5105. R Shih
    Optimisation of stress concentration for two-dimensional Inhomogeneities
    Masters, Houston, 1984.
  5106. GC Shih
    The basic role of the fibre/matrix interface on the fatigue performance of unidirectional fibreglass reinforced composites.
    PhD, CWRU, 1985. DA8510110.
  5107. W-K Shih
    A molecular composite model for mechanical properties of anisotropic semicrystalline polymers
    DSc, Washington University-MO, 1986. DA8709282.
  5108. Wen-Chang Shih
    A study on the phenolic resin pultrusion
    Masters, NTHU Taiwan, 1987.
  5109. J Shih
    Strength improvement of cement pastes with fibre reinforcement along with epoxy modification
    Masters, Drexel, 1988.
  5110. T Shih
    Dynamic mechanical spectroscopy: model epoxy resins
    Masters, Nebraska, 1988.
  5111. Chien-Jong Shih
    Optimum design of laminated composite structures for enhanced damping characteristics
    PhD, Florida, 1989. DA9021250. DAIB 51(3)1462.
  5112. Jim-Shown Shih
    Experimental-numerical analysis of bolted joints in finite composites with and without inserts
    PhD, University of Wisconsin - Madison, 1992.  AAD9306426  DAIB54(3)1628
  5113. Yan-Shin Shih
    Nonlinear vibration analysis of laminated plates on linear and nonlinear elastic foundations
    PhD, Utah State University, 1992.  AAD9316784  DAIB54(3)1486
  5114. VV Shilov
    Formation and characterisation of heterogeneous structure in multicomponent polymer systems
    Doctorate, Kiev, 1983.
  5115. Hyunjoo Shim
    Bond strength and its measurement in nonwoven fabrics
    PhD, NCSU Raleigh, 1991. DA9202567. DAIB 52(10)5479.
  5116. CJ Shimalla
    Mechanical behaviour and bonding in non-wovens
    PhD, Princeton, 1974. DA7520661. N75-32174.
  5117. Richard Anthony Shimansky
    Effects of interfaces on continuous fibre-reinforced brittle matrix composites
    PhD, Pennsylvania SU, 1989. DA9018279. DAIB 51(2)834.
  5118. Euy Sik Shin
    Effects of hydrostatic pressure on mechanical behaviour of graphite/epoxy composites and thermal behaviour of elastomers
    PhD, Rutgers SUNJ, 1988.  DA8914269.  DAIB 50(4)1604.
  5119. Kyung-Soo Shin
    Postbuckling behaviour of laminated specially orthotropic plates by affine transformation
    PhD, RPI, 1989. DA8926595. DAIB 50(7)3115.
  5120. Yong-Seok Shin
    Stress analysis and minimum weight design of honeycomb sandwich plates
    PhD, CWRU, 1989. DA9004512. DAIB 50(9)4187.
  5121. Dong Ku Shin
    Minimum-weight design of symmetrically laminated composite plates for postbuckling performance under in-plane compression loads
    PhD, VPI&SU, 1990. DA9108067. DAIB 51(11)5417.
  5122. Kwan-Hong Shin
    Modeling of casting of metal matrix composites using pressure infiltration
    PhD, University of Iowa, 1993.  AAD9421199  DAIB55(5)1982
  5123. Hyunho Shin
    Interface reactions and their influence on properties of silicon carbide fiber-reinforced ceramic matrix composites
    PhD, 1994.  AADAA19517143  DAB56(1)406
  5124. Christine T Shipp
    Cost effective use of advanced composite materials in commercial aircraft manufacture
    MS(ME&M), MIT, May 1990.
  5125. NC Shippen
    Acoustic emission monitoring of damage progression in graphite/epoxy laminates
    MS, Wyoming, 1985.
  5126. GV Shiryaeva
    A study of the adhesion of thermosetting polymers to glass
    Thesis, USSR.Acad.Sci.Inst.Phys, 1964.
  5127. M Shishesaz
    Stress analysis of fibre composite monolayers with broken filaments
    PhD, NWU, 1986.
  5128. VI Shlyakov
    Deformation of cylindrical shells of polymer composite in shock loading
    Dissertation, Eng.Sci.Gorky, 1981.
  5129. AN Shmarov
    Statistical micromechanics of strength of reinforced plastics in tension
    Dissertation, Riga, 1982.
  5130. Mark Alexander Shmorhun
    Spectroscopic probes of microviscosity and free volume in epoxy adhesives
    PhD, CWRU, 1989. DA8915622. DAIB 50(5)1970.
  5131. Mahmood M Shokrieh
    Failure of laminated composite pinned connections
    MEng, McGill University, 1991.  AADMM72222  MA31(2)899
  5132. David Short
    Effect of fibre diameter on the specific damping capacity of glass fibre reinforced polyester resin
    MSc, Bristol, October 1969.
  5133. JS Short
    Thermal expansion of graphite/epoxy composite laminates between 116 and 366K.
    MS, VPI&SU, July 1982.
  5134. Scott Robert Short
    Characterisation of interlaminar shear failures of graphite-epoxy composite materials
    PhD, Dayton, 1990. DA9116089. DAIB 52(1)463.
  5135. MH Shroff
    Thermal analysis comparison of microwave oven and convection oven cured Epon 812
    Masters, Louisville, 1988.
  5136. VD Shtraus
    Using dielectric spectrometry for examining the physico-mechanical properties of polymer materials
    Dissertation, Tech.Sci-Riga, 1978.
  5137. CJ Shu
    Reflection and transmission of steady state waves by a plane laminated elastic material
    Masters, Texas @ Austin, 1975.
  5138. KH Shu
    Interfacial bonding in basalt fibre polymer composite systems
    Thesis, Washington SU, 1978.
  5139. YH Shu
    Theoretical studies of non-isothermal multilayer co-extrusion flow - a new approach
    PhD, Lowell, 1988.
  5140. MJ Shuart
    An evaluation of the sandwich beam in four-point bending as a compressive test method for composites
    MS, VPI&SU, August 1978. NASA TM 78783. N78-33153.
  5141. MJ Shuart
    Short wavelength buckling and shear failures for compression loaded composite laminates
    PhD, Delaware, November 1985. DA8609058. NASA-TM-87640. N86-16271. N86-16609. N87-10403.
  5142. M Shubha
    <correlation of tensile strength and x-ray diffraction peak positions for Kevlar 49 fibres>
    MPhil, Mangalore - India, 1989.
  5143. DS Shukert
    Design & processing of low dielectric constant polymeric composite
    Masters, MIT, 1987.
  5144. JG Shukla
    Effect of processing parameters on morphology and mechanical properties of carbon/PEEK (APC2) composite
    Masters, Georgia IT, 1988.
  5145. SI Shukow
    Acoustic-mechanical characterisation of boron-aluminium composite laminates
    Masters, Delaware, June 1978.
  5146. MES Shukry
    Composite shells subjected to external pressure and to point loads
    PhD, Manchester, October 1986. D75860/87.
  5147. Mikhail Shvartsman
    Phase boundaries in anisotropic elastic materials
    PhD, University of Maryland, 1994.  AADAA19514582  DAB56(1)283
  5148. DS-Y Shy
    Finite element and fracture mechanics analyses of filament wound pressure vessels with thin metallic liners
    PhD, Nebraska-Lincoln, 1987. DA8818658. DAIB 49(7)2820.
    >>> C Shyhming, see S Chang.
  5149. T Shyr
    Studies of fibre-matrix interfaces
    PhD, Leeds, September 1989. D88838. ASLIB 39(3)7741.
  5150. Dean Leo Sicking
    Mechanical characterization of nonlinear laminated composites with transverse crack growth
    PhD, Texas A&M University, 1992.  AAD9315143  DAIB54(1)320
  5151. Amrit S Sidhu
    Study of metallic glass reinforced thermoplastic matrix composites
    MASc, University of Waterloo - Canada, 1991.  AADMM67385  MA31(1)426
  5152. S Sidi
    The dynamics of thermoset injection moulding and the anisotropies of moulded parts
    MEng, McGill, 1980.
  5153. Ruth Helen Sigley
    Failure mechanisms under complex loading of glass-reinforced polyester composites and their matrices: the effect of superposed hydrostatic pressure up to 300 MPa on axial tensile and compressive strengths, and in-plane shear properties of unidirectionally reinforced glass-polyester composites and the relevant polyesters
    PhD, Bradford, 1988. DX86518. DAIB 50(7)3115. ASLIB 38(4)8449.
  5154. NR Silnutzer
    Effective constants of statistically homogeneous materials
    PhD, Pennsylvania, 1972. DA7313475.
  5155. Karel F Silovsky
    Elastic analysis of laminated composite plates
    PhD, SDSMT, 1987. DA0379182.
  5156. RJ Silva-Nieto
    Prediction and characterisation of compression mould flow for unsaturated polyester resin sheet moulding compound
    PhD, Loughborough, July 1980. D31055/80.
  5157. G Simon
    Etude mecanique et structurale de la fibre de carbure de silicium
    [Mechanical and structural study of Nicalon SiC fibre]
    PhD, EMP Evry, 1984.
  5158. DL Simon
    Thermal wave imaging for nondestructive detection of adhesive in composite structures
    Masters, Oakland, 1988.
  5159. Sindee Lou Simon
    Cure and properties of thermosetting polymeric systems: high Tg epoxy/amine and dicyanate ester/polycyanurate materials
    PhD, Princeton, 1992. DA9216844. DAIB 53(1)503.
  5160. MB Simpson
    Development of a fringing capacitive surface image array for measurement of spacing in graphite composite layers.
    Masters, University of Washington-WA, 1986.
  5161. Rodney James Simpson
    Composite materials from recycled multi-layer polypropylene bottles and wood fibres
    MS, Michigan SU, 1991. MA 1345147. MA 30(1)70.
  5162. Jocelyn Ovetta Simpson
    Structure-dielectric property relationships for epoxy systems:  a free volume analysis
    PhD, Georgia Institute of Technology, 1994.  AADAAI9511614 DAB55(12)5465
  5163. DF Sims
    Viscoelastic creep and relaxation behaviour of laminated composite plates
    PhD, S.Methodist, May 1972. DA7227298.
  5164. GD Sims
    A study of the impact performance of fibre reinforced plastics
    PhD, Surrey, 1976. D18227/77.
  5165. KL Sims
    An aerodynamic investigation of a forward swept wing.
    MS, AFIT, December 1977. AFIT/GAE/AA/77D-14. AD A048 898. N78-19069
  5166. Stephen Mark Singer
    Experimental study of some property effects and one-dimensional modelling of the cure and residual stress for thermal and electromagnetic curing of epoxy resin
    MS, Michigan SU, 1988.  MA1336045.  MA27(3)399.
  5167. PN Singh
    Thermal stresses in anisotropic plates
    Masters, Louisiana SU, 1972.
  5168. K Singh
    Optimum design of fibre reinforced composite structural elements
    MTech, IIT-Kanpur, 1976.
  5169. RR Singh
    Solvent cast electrically conductive composites
    Masters, Akron, 1984.
  5170. SC Singh
    Wave propagation in anisotropic media and full waveform inversion
    PhD, Toronto - Canada, 1987. DAIB 48/12/3588.
  5171. Raghvendra Singh
    Buckling analysis of delaminated composite plates with arbitrary edge conditions
    PhD, Ohio SU, 1989. DA9014490. DAIB 51(1)336.
  5172. Peter Singh
    Moulding behaviour and microstructure of injection moulded short glass fibre reinforced polypropylene composites
    PhD, McGill, 1989. DA-569076. DAIB 51(9)4583.
  5173. S Sinulingga
    Real time MRP with optimisation of manufacturing capacity utilization
    PhD, Cranfield IT, November 1988. DX86750.
  5174. F Sirieix
    Synthese et pyrolyse de silazanes: etudes des relations entre structure de precurseur et microstructure de la ceramique a base de nitrure de silicium [Synthesis and pyrolysis of silazanes: influence of precursor
  5175. structure on the microstructure of SiN based ceramics]
    Thesis 87-9, Limoges, 1987.
  5176. M Sitepu
    Production and properties of high-modulus fibre composites
    MSc, Leeds, 1986. ASLIB 36(3)5306.
  5177. CC Siu
    Free vibrations of sandwich conical shells with free edges.
    Masters, Oklahoma, 1969.
  5178. AI Sivakumar
    Design, computer monitoring and control of a "RRIM" machine
    PhD, Bradford, 1984.
  5179. KS Sivakumaran
    A refined theory of generally laminated plates.
    PhD, Calgary, January 1983.
  5180. B Sivasundaram
    Ultrasonic nondestructive evaluation of adhesively bonded fibre reinforced composite structures
    Masters, MIT, 1982.
  5181. GT Sivy
    Studies of the initial stages of the degradation of polymeric precursors used in the preparation of carbon/graphite fibres.
    PhD, Pennsylvania SU, 15 September 1982. ARL/PSU/TM-82-193. N83-18916. AD A121 021.
  5182. POW Sjoblom
    On strength prediction for fibre composites.
    Dissertation #102, Linkoping, 1983.
  5183. GE Sjodin
    A review of the fatigue behaviour of graphite/epoxy composite laminates
    Masters, University of Washington-WA, 1981.
  5184. SD Sjoerdsma
    <computation of the shear components of strain>
    Thesis, TU Eindhoven, 1981.
  5185. Robin Sjouke Ciaron van den Nieuwenhuizen
    Tape-laying thermoplastic matrix carbon-fibre composites using direct electrical heating
    PhD, Stanford University, 1994.  AAD9430017  DAIB55(7)2961
  5186. Lambros Skartsis
    The permeation of fiber beds by Newtonian and non-Newtonian fluids with applications to the autoclave and resin transfer molding processes
    DSc, Washington University, May 1992.  AAD9235907  DAIB53(7)3648
  5187. AM Skinner
    Studies on the cyclisation of polyacrylonitrile
    PhD, Surrey, 1979/80. D29944/80.
    >>> KJ Skirkowski, see FJ Donnachie.
  5188. AM Skudra
    Deformation and statical fatigue of reinforced plastics under plane loading
    Doctorate, Riga, 1967.
  5189. AA Skudra
    Structural strength criteria of angle-ply reinforced plastics
    Dissertation, Riga, 1984.
  5190. R Slade
    Composite-faced sandwich construction for primary spacecraft structures
    PhD, Cranfield IT, September 1989. DX90899. DAIB 51(8)3952.
  5191. RC Slater
    Investigation of static fatigue in S-glass/epoxy composites
    Masters, Arizona, 1972.
  5192. Kerry Timothy Slattery
    A statistically-based model of the interacting processes which lead to creep-rupture in filament-wound composite pressure vessels
    PhD, Mississippi, 1989. DA9019281. DAIB 51(2)834.
  5193. William Shewen Slaughter
    Load-transfer and crack bridging in fibre-toughened ceramic composites
    PhD, Harvard, 1991. DA9211749. DAIB 52(11)5920.
  5194. HS Sledge
    Analysis of non-linear stress-strain behaviour of fibre-reinforced composite materials
    PhD, S.Methodist, 1976. DA7709790.
  5195. JG Sloan
    The behaviour of rectangular composite material plates under lateral and hygrothermal loads
    Masters, Delaware, 1979.
  5196. Forrest Eugene Sloan
    Investigations into the effects of long-term seawater exposure on graphite/epoxy composite materials
    PhD, UCSD, 1991. DA9130764. DAIB 52(6)3241.
  5197. M Slomiana
    Delamination growth in graphite/epoxy laminates under compressive loads
    PhD, Drexel, 1985. DA8425590. N85-18088.
  5198. Patricia Louise Smaldone
    Behaviour of advanced composite materials in simulated space environments
    MS, Lowell, 1990. MA1342148. MA 29(2)315.
  5199. GD Small
    The structure related properties of a cellular composite.
    PhD, Bath, 1984.
  5200. James Douglas Small
    An experimental investigation of the rheological properties of various polystyrene composites
    PhD, Florida, 1989. DA9021251. DAIB 51(3)1393.
  5201. AJ Smiley
    Rate sensitivity of interlaminar fracture toughness in composite materials
    MMAE, Delaware, December 1985.
  5202. Anthony John Smiley
    Diaphragm forming of carbon fibre reinforced thermoplastic composite materials
    PhD, Delaware, May 1988. DA8824201. DAIB 49(8)3404.
  5203. Randolph J Smiley
    Analysis and control of physical and chemical bonding at the fiber/matrix interface of reinforced composite materials
    PhD, Purdue University, 1994.  AAD9501773  DAIB55(8)3453
  5204. TR Smith
    The fatigue of glass reinforced plastics
    PhD, Nottingham, 1968!.
  5205. GE Smith
    Problems in the mechanics of fibre-reinforced elastic and plastic solids
    PhD, Nottingham, 1970!.
  5206. SC Smith
    Friction and wear behaviour of Celanese 88 graphite fibre reinforced epoxy
    Masters, MIT, 1972.
  5207. AP Smith
    The effect of transverse shear deformation on the elastic stability of orthotropic plates due to inplane loads.
    MMAE, Delaware, May 1973.
  5208. DM Smith
    Design and testing of FRP structural components
    MSc, Cranfield IT, September 1973.
  5209. PG Smith
    Stress analysis of anisotropic linear elastic axisymmetric bodies
    Masters, Alberta, 1974.
  5210. SC Smith
    The friction and wear of graphite fibre reinforced polymer
    Masters, MIT, 1975.
  5211. GR Smith
    Creep anisotropy in short glass fibre reinforced thermoplastics
    PhD, Cranfield IT, 1976. D5616/76.
  5212. EW Smith
    Cyclic biaxial deformation and failure of a glass fibre reinforced composite
    PhD, Cambridge, December 1976. D19376/77.
  5213. ZP Smith
    Dynamic moduli of continuous filament yarn subjected to low frequency excitation superimposed on high initial longitudinal strain
    PhD, NCSU Raleigh, 1977. DA7729645.
  5214. SR Smith
    Investigation of Saint Venant's principle as related to laminated composite plates
    Masters, AFIT WPAFB, December 1978. AFIT/GAE/AA/78D-13. AD A081 908.
  5215. RL Smith
    Limit theorems for the reliability of series-paralell load-sharing systems
    PhD, Cornell, May 1979.
  5216. KL Smith
    Influence of thermoplastic fillers on the mechanical properties of fibre reinforced polyesters
    Masters, MIT, June 1979.
  5217. CR Smith
    Compounding processing and mechanical property evaluation of polyester/aramid fibre composites
    Masters, Lowell, 1979.
  5218. DT Smith
    Single particle scattering in the detection of asbestiform fibres
    Masters, Minnesota, 1981.
  5219. PD Smith
    Methods of determining long term creep in composite materials
    Masters, RPI, 1981.
  5220. BA Smith
    Polymer matrix composite materials in a simulated space environment- ultraviolet and vacuum effects
    Masters, Toronto, 1982.
  5221. PA Smith
    Aspects of the static and fatigue behaviour of composite laminates, including bolted joints
    PhD, Cambridge, December 1985. D58851/87. ASLIB 35-7050.
  5222. R Smith
    Laser assisted tape-laying of thermoplastic matrix composites
    Senior thesis, Delaware, 1986.
  5223. SA Smith
    An experimental investigation of damage-dependent material damping of laminated composites
    Masters, TA&MU, 1988.
  5224. Mark Edward Smith
    Fast reactive processing of thermoplastic/thermoset epoxy
    MS, CWRU, 1990. DA1339574. MA 28(4)635.
  5225. Christine I Smith
    Utilization of PVDF sensors to determine impact damage in graphite/epoxy plates by acousto-ultrasonic technique
    MEng, Concordia University - Canada, 1992.  AADMM81002  MS32(1)323
  5226. Edward C Smith
    Aeroelastic response and aeromechanical stability of helicopters with elastically coupled composite rotor blades
    PhD, University of Maryland, 1992.  AAD9304398  DAIB53(10)5316
  5227. Mark Edward Smith
    Molecular architecture and gelation phenomena in epoxide networks
    PhD, Case Western Reserve University, 1993.  AAD9416191  DAIB55(2)511
  5228. Lloyd V Smith
    An experimental and analytical evaluation of braided composite cylinders under biaxial loading
    PhD, University of Utah, 1994.  AAD9426138  DAIB55(5)1982
  5229. A Smithson
    Preparation of glass fibres and bulk samples by the sol-gel process
    PhD, Sheffield, 1985. ASLIB 37(3)6394.
  5230. SJ Smulski
    Flexural behaviour of a glass fibre reinforced wood fibre composite
    PhD, VPI&SU, 1985. DA8605462.
  5231. JM Snead
    Moisture and temperature effects on the instability of cylindrical composite panels
    MS, AFIT WPAFB, December 1981. N82-24310. AD A111 127. AFIT/GAE/AA/81D-29.
  5232. Lance Lewis Snead
    Investigation of silicon carbide composites as structural materials for nuclear applications
    PhD, Rensselaer Polytechnic Institute, 1993.  AAD9420363  DAIB55(3)1160
  5233. DW Snow
    Strain energy density theory for cracks in anisotropic elasticity
    Masters, Lehigh, 1973.
  5234. RW Snowden
    Thermophysical properties of plasticised and unplasticised phenolic resins
    MSc, Salford, 1987. ASLIB 38(1)0926. Restricted access.
  5235. MD Snyder
    Crack tip stress intensity factors in finite anisotropic plates
    PhD, Carnegie-Mellon, 1973. DA7322882.
  5236. BA Snyder
    Thermal stresses and delamination in thick composite cylinders
    Masters, San Diego SU, 1987.
  5237. Tresna Priyana Soemardi
    Mechanical behavior and damage of a fiber-glass/epoxy tube under static and fatigue biaxial loadings
    Etude du comportement mecanique et de l'endommagement de tube en composites verre/epoxy soumis a des sollictations axiales et biaxees en statique et en fatigue
    Dr, Ecole Centrale des Arts et Manufactures, 1990.  AADC286444  DAIC54(2)584
  5238. T Soepardi
    Aeroelastic synthesis of the oblique wing configuration
    Masters, Florida, 1988.
  5239. A-K Soh
    Stresses in composites with unidirectional reinforcement
    PhD, Surrey, 1981. D35316/81.
  5240. MM Sohi
    Compressive behaviour of graphite/epoxy composites.
    MS, Washington University-MO, 1984.
  5241. Mohsen M Sohi
    Compressive strengths and modes of failure in polymeric composites
    DSc, Washington University-MO, 1989. DA9035032. DAIB 51(7)3535.
  5242. Dong Woo Sohn
    Network structure and mechanical properties of amine cured epoxy
    PhD, Tufts University, 1993.  AAD9316032  DAIB54(4)2099
  5243. BV Sokhanev
    Investigation of the process of active elastic spiral formation in a flexible cable
    Dissertation, Novosibirsk, 1982.
  5244. H Sol
    Identification of anisotropic plate rigidities using free vibration data
    PhD, VUB-Brussels, 1986.
  5245. WE Soll
    Behaviour of advanced thermoplastic composites in forming.
    MS(ME), MIT, June 1986/May 1987.
  5246. DF Solnik
    <coupling agents for high volume fraction vacuum impregnated composites>
    PhD, CWRU, 1985.
  5247. VP Solomko
    <reinforcing effect of fillers in polymers>.
    Doctorate, Kiev, 1971.
  5248. N Somaratna
    Three-dimensional stress singularities in anisotropic materials and composites
    PhD, Illinois @ Chicago, 1985. DA8511281. N86-10286.
  5249. AO Somefun
    Composite structural tube
    DEngSc, Columbia, 1977. DA7804390.
  5250. SW Sommer
    A comparitive investigation of fibreglass versus metal piping upon cathodic corrosion prevention for underground flammable liquids
    Masters, California SU @ Fresno, 1973.
  5251. SW Song
    Effect of crosslinking on aramid composites and ballistic impact resistance
    Masters, MIT, 1986.
  5252. Ohseop Song
    Modelling and response analysis of thin-walled beam structures constructed of advanced composite materials
    PhD, VPI&SU, 1990. DA9116645. DAIB 52(1)336.
  5253. Jian Cheng Song
    Intrinsic luminescence cure sensors for epoxy resins and fiber-reinforced epoxy composites
    PhD, University of Connecticut, 1993.  AAD9419419  DAIB55(3)932
  5254. Seung Jae Song
    A new approach to fracture of layered fibrous composites:  experiments and analysis
    PhD, University of Michigan, 1994.  AAD9423321  DAIB55(4)1532
  5255. John Zhen-Hua Song
    Buckling of a composite nonlinearly elastic plate under uniaxial loading
    PhD, Michigan State University,1995.  AADAAI9537267  DAB56(7)3986
  5256. ML Soni
    On the computation of stress intensity factors in fibre composite media using a boundary integral method
    Masters, Texas @ Austin, 1974.
  5257. ML Soni
    A microstructure continuum theory for laminated elastic composites
    PhD, Texas @ Austin, 1977. DA7723034.
  5258. James Matthew Sonnett
    The chemistry and reaction kinetics of one step polyimide formation
    PhD, University of Delaware, 1992.  AAD9232652.  DAIB 53(6)3036
  5259. AG Soomro
    Laminated beams subjected to transverse load
    MPhil, Surrey, 1981-82.
  5260. Sze Su Soong
    An investigation into the knittability of weft knitted fabrics
    PhD, Leeds, 1988. D88840. DAIB 51(2)966.
  5261. J Soovere
    Dynamic response of acoustically excited stiffened composite honeycomb panels
    PhD, Southampton, 1984. D53475/85.
  5262. JR Sorem
    Statistical distribution of mechanical properties for three graphite/epoxy material systems
    Masters, Kansas, 1981.
  5263. Robert Michael Sorem
    Linear and geometrically nonlinear P-version three dimensional curved shell element for isotropic, generally orthotropic and laminated composite materials
    PhD, Kansas, 1991. DA9210119. DAIB 53(1)384.
  5264. Sotiris N Sotiropoulos
    Performance of FRP components and connections for bridge deck systems
    PhD, West Virginia University, 1995.  AADAAI9543880  DAB56(8)4480
  5265. JP Sottery
    Rapid pulsed voltammetric stripping at thin mercury film microvoltammetric electrodes
    PhD, Duke, 1985. DA8624383.
  5266. NR Sottos
    Mechanical characterisation and the thermal stresses in fibre-matrix interface regions
    PhD, Delaware, in progress 1988.
  5267. A Souahi
    Structural optimisation of aircraft lifting surfaces to satisfy flutter requirements
    PhD, Cranfield IT, June 1986. DX72266/87.
  5268. Kathryn A Soucy
    Process modelling, state estimation and feedback control of polymer composite processing
    PhD, University of Washington-WA, 1991. DA9203308. DAIB 52(8)4350.
  5269. SD Souders
    Fracture toughness of polyester casting resins
    Masters, Drexel, 1988.
  5270. S Sourour
    Thermal and kinetic characterisation of thermosetting resins during cure
    PhD, McGill-Canada, 1978.
  5271. JR Southland
    Finite element analysis of a glass fibre inclusion
    Masters, Central Florida, 1988.
  5272. C Soutis
    Compression failure of notched carbon fibre epoxy panels
    PhD, Cambridge, 1990. ASLIB 39(3)7359.
  5273. Jose Paulino de Souza,  see JP de Souza
  5274. Douglas Eric Spahr
    Processing-microstructure-toughness relationships in thermoplastic matrix composites
    PhD, Delaware, 1990. DA9109952. DAIB 51(11)5468.
  5275. Lisa Kay Spainhour
    Composite materials property data modeling with the entity-relationship method
    PhD, North Carolina State University at Raleigh, 1994.  AAD9501947  DAIB55(8)3467
  5276. JC Spanner
    Selective review on the utilisation of acoustic emission techniques for materials research and structural integrity analysis: a literature survey
    MS, Washington SU, 1970.
  5277. DAC Sparry
    Numerical and experimental analyses of large composite skeletal satellite systems
    PhD, University of Surrey, 1992.  AADDX98135  DAIB53(10)5316
  5278. IR Spaude
    Korrosion und Alterung von Glasfasern und Glasfaserverstarkten Duroplasten
    [Corrosion and ageing of glass fibre and glass fibre reinforced thermoset plastics]
    Dr.Ing, Inst.Werkstofftechnik of Kassel, 29 March 1984.
  5279. FD Spaun
    Reinforcement of the tensile strength & bending stiffness of wood with fiberglass
    Masters, Washington SU, 1979.
  5280. SD Speake
    Prediction of the rate of degradation of a polyester/glass composite by water
    PhD, CNAA: Kingston, February 1986. D72047/87. ASLIB 37(4)8304.
  5281. SM Spearing
    Fatigue damage mechanics of carbon fibre laminates
    PhD, Cambridge, 1990. ASLIB 39(3)7360.
  5282. FS Spears
    General buckling of sandwich conical shells under axial compression
    Masters, Tulsa, 1969.
  5283. CW Spencer
    Strength improvement of mechanically fastened composite joints using a softening strip or soft material reinforcement
    Masters, RPI, 1986.
  5284. CP Spencer
    Anisotropic phase polymerisation kinetics of rodlike polymer poly[(benzo (1,2-d:4,5-d')bisthiazole-2,6-diyl)-1,4 phenylene] {PBT}
    PhD, Carnegie-Mellon, 1987. DA8802946.
  5285. BE Spencer
    Prediction of manufacturing stresses in thick-walled orthotropic cylinders
    PhD, Nebraska-Lincoln, 1988. DA8818660. DAIB 49(7)2821.
    >>> BS Spiegel, see BS Spigel.
  5286. BS Spigel
    An experimental and analytical investigation of the Iosipescu shear test for composite materials
    MSc, Old Dominion, August 1984.
  5287. G Spinardi
    The development of US fleet ballistic missile technology: Polaris to Trident
    PhD, Edinburgh. 1988. D85054.
  5288. GT Spirnak
    The effect of temperature on the material damping of graphite/epoxy composites in a simulated space environment
    Masters, Delaware, 1987.
  5289. SM Spivak
    The behaviour of woven fabrics in shear
    PhD, Manchester, 1967!.
  5290. SL Spregelberg
    The design and testing of plywood girders
    Masters, Wyoming, 1965.
  5291. RG Sprigg
    An experimental study to determine the reduction in ultimate bending moment of a composite plate due to internal delamination
    MS, NPS Monterey, December 1977.
  5292. Kerry Linn Springer
    Sensitivity analysis of composite beam structural response
    MS, University of Texas at Arlington, 1994.  AADAAI1359431.  MA33(3)978
  5293. K Srikrishna
    Toughening mechanisms in mullite/zirconia composites
    PhD, California: Berkeley, 1988. DA8916899. DAIB 50(4)1604.
  5294. S Srinivasagopalan
    Dynamic torsional behaviour of some carbon fibre
    PhD, University of Washington WA, 1979. DA8013597.
  5295. K Srinivasamurthy
    Nonlinear static and dynamic analysis of circular laminated anisotropic plates
    Masters, Calgary, 1987.
  5296. K Srinivasan
    Viscoelastic characterisation of thermoplastic composites and neat resin
    Masters, RPI, 1987.
  5297. Krishna Srinivasan
    Mode II delamination fatigue resistance of composites
    PhD, RPI, 1988. DA8905213. DAIB 49(11)4982.
  5298. AK Srivastava
    Internal stresses in an epoxy polymer
    MSc, Newcastle, 1982.
  5299. VK Srivastava
    Nondestructive evaluation of composite materials
    PhD, Banaras Hindu Univ @ Varanasi, 1987.
  5300. George Marcel St Hilaire
    Thermomechanical fatigue of crossply silicon carbide fiber-reinforced/silicon nitride ceramic composites under impinged kerosene-based flame
    DEng, University of Lowell, 1993.  AAD9326193  DAIB54(4)2148
  5301. GR Stafford
    Investigation of the electrochemical behaviour of graphite fibre-polymer composites
    PhD, Virginia, 1980. DA8022944.
  5302. DO Stalnaker
    An investigation of edge damage development in quasi-isotropic graphite-epoxy laminates
    Masters, VPI&SU, April 1976.
  5303. JD Stalnaker
    The effect of mould size on the exothermic reaction and compressive strength of epoxy resin chocks
    MS in ME, NPS Monterey, December 1984. AD A155 102. N85-32203.
  5304. H Stang
    A composite material theory and its application to the description of cement composites loaded in tension.
    PhD, TU Denmark, 1984. In Danish. Series R 193.
  5305. RJ Stango
    Process-induced viscoelastic stress in composite laminate
    PhD, UIUC, 1985. DA8511676. N86-13376.
  5306. KE Stansfield
    The effects of stress and thermal spiking on the Hygrothermal response of carbon fibre reinforced plastics
    PhD, CNAA: Kingston (Appl.Chem), February 1989. DX77379.
  5307. James Michael Starbuck
    Damage states in laminated composite three-point bend specimens: an experimental/analytical correlation study
    PhD, VPI&SU, 1990. DA9023181. DAIB 51(4)1915.
  5308. EB Stark
    Kinetic influences on processing-structure-property relationships of high performance epoxy matrices and their composites
    PhD, University of Washington-WA, 1985. DA8529949.
  5309. Alois Starlinger
    Development of efficient finite shell elements for the analysis of sandwich structures under large deformations and global as well as local instabilities
    DrTechn., Technische Universitaet Wien, 1990.  AADC274874  DAIC54(1)302
  5310. Y Stavsky
    On the theory of heterogeneous anisotropic plates
    DSc, MIT, February 1959. WADD-TR-60-746, 1960.
  5311. SC Steadman
    The in-situ production of polyethylene fibres from polymer blends
    PhD, Brunel, 1990. DX93267.
  5312. Mark Gregory Steckel
    Physio-mechanical properties of absorbable composites:  CSM short-fiber reinforced PDS and PGA
    PhD, Drexel University, 1992.  AAD9237896  DAIB53(8)4315
  5313. SJ Stedman
    The fabrication of composite ceramics by injection moulding
    PhD, Brunel, 1989. DX91483. DAIB 51(10)4992.
  5314. David Andrew Steenkamer
    The influence of preform design and manufacturing issues on the processing and performance of resin transfer molded composites.
    PhD, University of Delaware, 1994.  AADAA19516346  DAB56(1)481
  5315. D Stefan
    Structural properties of bisphenol-A polycarbonate.
    MASc, Toronto, 1969.
  5316. D Stefan
    Molecular motions in polyblends and composites based on bisphenol-A polycarbonate
    PhD, Toronto, 24 October 1972. NLC fiche 16131.
  5317. S Stefanidis
    Compressive properties and impact toughness of carbon fibre-Kevlar 49 fibre-epoxy hybrid composites
    BE, Sydney, November 1983.
  5318. HM Stefanyshyn
    Mechanical properties in fracture surface analysis of a thermoplastic composite matrix
    Masters, MIT, 1985.
  5319. PW Steiner
    Damage zone in notched graphite/epoxy plate
    MS, MIT, September 1980.
  5320. Paul William Steinert
    Improved vibration and noise reduction of marine composites using integrated damping layers
    PhD, Florida Institute of Technology, 1995.  AADAAI9531248  DAB56(5)2807
  5321. K Stellbrink
    Probability of crack propagation in a unidirectional composite with a single fibre breakage
    PhD, Stuttgart, December 1977. In German. DLR-FB-77-56.
    Translation: ESA-TT-524, March 1979. N80-12125.
  5322. Alan Douglas Stemple
    Nonlinear static and dynamic modelling of composite rotor blades including warping effects
    PhD, Maryland, 1989. DA9012524. DAIB 50(12)5753.
  5323. EI Stepanychev
    Investigation of the laws of deformation of polymer matrix composites in monotonic static loading and in creep.
    Doctorate, Moscow, 1972.
  5324. VM Stephens
    Crashworthiness of composite seats for civil aircraft
    PhD, Cranfield Institute of Technology, 1992.  AADDX98009  DAIB53(10)5316
  5325. MS Stephenson
    A study of the ballistic performance of lightweight armours against small arms ammunition
    PhD, City University - London, 1991.  AADDX97751  DAIB53(9)4892
  5326. P Stevens
    Factors affecting tensile behaviour of glass-reinforced polystyrene
    PhD, CNAA, 1979.
  5327. PJ Stevens
    Frictional wear of fibrous polymers and their assemblies
    PhD, Leeds, October 1980. D85724.
  5328. WC Stevens
    The formation and behaviour of carbonaceous mesophase in petroleum pitch [carbon fibres]
    PhD, RPI, 1985. DA8519513.
  5329. PJ Stevenson
    The mechanical properties of non-woven fabrics.
    PhD, Manchester, 1962.
  5330. JF Stevenson
    Discrete-element microstress analysis of unidirectional fibre composites
    PhD, CWRU, 1970. DA7025922.
  5331. AJ Stevenson
    Fracture of epoxy resin systems
    PhD, London, 1978. D26529/79.
  5332. WB Stewart
    On the compression strengths of glass-epoxy composites.
    Masters, Delaware, June 1978.
  5333. DF Stewart
    Single fastener hole repair in graphite epoxy panels
    Masters, San Diego SU, 1987.
  5334. CJM Stewart
    The characterisation of carbon fibre surfaces by electrochemical methods
    MSc, St Andrews, 1989. ASLIB 39(1)0973.
  5335. Rodney D Stewart
    Transient electromagnetic scattering on anisotropic media
    PhD, Iowa SU, 1989. DA9003567. DAIB 50(9)4048.
  5336. Todd Eugene Steyer
    Whisker-reinforced ceramic matrix composites with modified interfaces
    PhD, Northwestern University, 1993.  AAD9415824  DAIB55(1)6687
  5337. RC Stiffler
    Wave propagation in composite plates
    PhD, VPI&SU, November 1986. DA8711006.
  5338. AV Stinkas
    <static evaluation of fatigue strength of structural polymers>
    Dissertation, Moscow, 1963.
  5339. VF St Lawrence
    Dynamic mechanical behaviour of a composite viscoelastic material
    Masters, Pennsylvania SU, 1967.
  5340. WL Stock
    Green's function for interface crack between two anisotropic media
    Masters, University of Washington-WA, 1986.
  5341. TA Stock
    Probabilistic fibre composite micromechanics
    Masters, Cleveland SU, 1987.
  5342. H Stockhorst
    <thermal expansion coefficient of Nicalon fibre bundles>
    Dissertation, TU Berlin, 1984.
  5343. FK Stoll
    Untersuchungen zur korrosion und witterungsbestanddigkeit von coil-coating verbundsystemen
    [Investigation of corrosion and exposure resistance of 'coil-coating' composite systems]
    Dissertation, TH Aachen, 1977. DS7701.
  5344. MG Stout
    The methods for measuring damping in composite materials
    Masters, Minnesota, 1974.
  5345. Curt J Stout
    A finite element analysis of a sandwich composite chassis
    MSc, University of Alberta - Canada, 1991.  AADMM66600  MA30(4)1463
  5346. MG Storch
    Computer aided method for the measurement of fibre diameters by laser diffraction
    MS, NPS Monterey, September 1986. AD A176 092. N87-19707.
  5347. J Storck
    Kriterien fur die Wickelmaschinengerechte Steuerdatenermittlung [Criteria for winding machine control]
    Graduate thesis, IKV Aachen, 1987.
  5348. B Storkersen
    Diploma thesis, Trondheim, 1982.
  5349. MG Stout
    The methods for measuring damping in composite materials
    Masters, Minnesota, 1974.
  5350. Curt J Stout
    Effect of signalling a positive reinforcer on contextual conditioning
    MA, McGill University, Canada, 1990.  AADMM66506  MA30(4)1497
  5351. Larry Hayes Strait Jr
    Thermo-mechanical fatigue of polymer matrix composites
    PhD, Pennsylvania State University, 1994.  AAD9428214  DAIB55(6)2353
  5352. RA Strasser
    Continuous processing of highly filled polymer melts.
    Masters, MIT, 1984.
  5353. KF Straub
    Application of the finite element method to rotary wing aeroelasticity
    PhD, UCLA, 1980. DA8104040. N81-18043.
  5354. AD Straw
    Buckling of composite cylindrical panels considering environmental effects
    Masters, AFIT, December 1985. AFIT/GAE/AA/85D15. AD A163 878. N86-25024.
  5355. RB Strebinger
    A fibre reinforced composite foam laminate in lightweight orthoses
    Masters, RPI, 1983.
  5356. KN Street
    Creep behaviour of fibre composite materials
    PhD, London, 1971.
  5357. VS Strelyaev
    Statistical laws of fracture of composites based on mineral fibres and polymeric matrixes under quasistatic loading.
    Doctorate, Moscow, 1971.
  5358. KC Strobl
    A photoelastic stress analysis of laminated beams.
    Masters, VPI&SU, 1972.
  5359. GK Stroganov
    An investigation of deformation and strength of some new polymers for the design of components in plastic creep.
    Dissertation, Kalinin, 1975.
  5360. LD Stroh
    The effects of resin, reinforcements and interleafs on impact resistance of a fibreglass reinforced plastic boat hull laminate
    Masters, MIT, 1988.
  5361. H-E Stromvall
    Mineral & cellulosic fillers in common thermoplastics
    PhD, Chalmers-Goteborg, 1984.
  5362. WP Stroud
    On the stresses and deformations of sandwich plates with anisotropic facings
    Masters, Delaware, 1971.
  5363. TP Stuart
    Compounding of carbon fibre and nylon 66 using a single screw extruder
    BTech, Brunel, 1979.
  5364. DJ Stubblefield
    The development of a bamboo reinforced urethane roofing element for use in tropical areas
    MS, Washington University-MO, 1972.
  5365. JA Stucki
    Impact effects on SMC-R50 composite
    Masters, Purdue, 1983.
  5366. SP Stukel
    Aeroelastic tailoring for passive flutter suppression.
    MS, Purdue, December 1982.
  5367. BL Stump
    Thermal degradation kinetics of polyimides by thermogravimetric analysis
    Masters, Bucknell, 1980.
  5368. David Michael Stump
    Crack-growth resistance in reinforced ceramic composites
    PhD, Harvard, 1990. DA9021813. DAIB 51(3)1351.
  5369. S Sture
    An improved multiaxial cubical cell and its application to the testing of anisotropic materials
    Masters, Colorado, 1973.
  5370. JB Sturgeon
    Some aspects of tensile and shear fatigue in carbon fibre reinforced plastics, including hoop wound tubes
    PhD, Surrey, 1976. D18124/77.
  5371. Francisco Antonio Sturla
    Green's function formulation of plane crack problems for general anisotropic materials
    PhD, Michigan, 1988. DA8821658. DAIB 49(8)3289.
  5372. Philip Charles Sturman
    Low-frequency electrical behaviour of dilute conducting fibre composites
    PhD, Delaware, 1990. DA9101072. DAIB 51(8)3967.
  5373. T Stypka
    Analysis of measurement inaccuracy of fine wire diameter using light diffraction methods
    PhD, TU Warsaw, 1980.
  5374. Fong-Chin Su
    Large elastic strain in orthotropic shells of revolution including torsion and transverse shear deformation
    PhD, Rochester, 1989. DA9019836. DAIB 51(3)1463.
  5375. Te-Yeu Su
    A study of the effects of fiber blend ratio on tensile characteristics of thermoplastically bonded Kevlar(RTM) fiber composites
    MSEng, University of Massachusetts - Lowell, 1994.  AAD1357079  MA32(5)1474
  5376. SA Suarez
    Optimisation of internal damping in fibre reinforced composite materials
    PhD, Idaho, December 1984. DA8518196.
  5377. BS Subagio
    Contribution a la modelisation de l'endommagement de fatigue en flexion dans les materiaux unidirectionnels [Modelling flexural fatigue damage in unidirectional composites]
    Doctorate, Ecole Centrale de Lyon, 1987. ECL-87-12. ETN-88-91623. N88-15843.
  5378. Suresh Subramanian
    Frequency effect on the fatigue delamination onset and growth characteristics of laminated composites
    MS, Texas @ Arlington, 1990. MA1342516. MA 29(3)483.
  5379. Ramaswamy Subramanian
    The effects of jet fuel and water absorption on edge delamination of graphite-epoxy composites
    PhD, Wichita State University, 1993.  AAD9406071  DAIB54(9)4794
  5380. Suresh Subramanian
    Effect of fiber/matrix interphase on the long term behavior of cross-ply laminates
    PhD, Virginia Polytechnic Institute and State University, 1994.  AAD9502726  DAIB55(9)3967
  5381. CG Subramonian
    Development of ball bearings with plastic races.
    MTech, IIT-Madras, 1984.
  5382. Kenneth Glen Such
    Short and long glass fiber composites:  orientation and mold filling simulation
    MEng, University of Massachusetts, 1994.  AADAAI1360534  MA33(4)1274
  5383. S Sudhakar
    Comparison of metal and composite materials for robotic arms
    Masters, SDSMT, 1987.
  5384. MJ Sudlow
    <glass fibre composites>
    MEng, McGill, 1982.
  5385. KW Suits
    Nonlinear analysis of orthotropic sandwich plates
    Masters, Tennessee TU, 1968.
  5386. Ashish Mahendra Sukhadia
    The in-situ generation of liquid crystalline polymer reinforcements in thermoplastics
    PhD, VPI&SU, 1991. DA9123758. DAIB 52(5)2676.
  5387. PG Sullivan
    Graphite fibre morphology- effect on behaviour in graphite aluminium composites
    Masters, CSULB, 1977.
  5388. PD Sullivan
    An analysis of symmetric reinforcement of graphite/epoxy honeycomb sandwich panels with a circular cutout under uniaxial compressive loading
    Thesis(AeroEng), NPS Monterey, December 1985.AD A164 490.N86-25426.
  5389. LL Sullivan
    Investigation of the effects of orientation and physical ageing on the creep characteristics of polyarylenesulphide-2 using thermomechanical analysis
    Masters, Texas @ Arlington, 1988.
  5390. Rani Warsi Sullivan
    Ultrasonic imaging of ply orientation in graphite epoxy laminates using oblique incidence techniques
    MS, Mississippi State University, 1993.  AAD1353907 MS32(1)332.
    >>> PD Sullivan, see DH Pickett.
  5391. JN Sultan
    Crack propagation behaviour of toughened polyesters.
    Masters, MIT, 1967.
  5392. JA Sultana
    Effect of residual manufacturing stresses on the fracture of graphite/epoxy laminates
    Masters, MIT, 1987.
  5393. John Summerscales
    The mechanical properties of carbon fibre with glass fibre hybrid reinforced plastics
    PhD, CNAA: Plymouth, May 1983. D49705/84. D50187/84. N84-24710. N84-31292. ASLIB 35-7052.
  5394. JS Summersetts
    The present status of plastics as an engineering material
    Masters, Oregon SU, 1968.
  5395. EE Sumner
    Thermoelastic attenuation in composites, polycrystals and cracked solids
    PhD, Harvard, 1985. DA8510225. N86-14682.
  5396. Chin-Teh Sun
    Effective stiffness theory for laminated media
    PhD, NWU, 1967. DA6803226.
  5397. WC Sun
    Analysis of laminated composite cylindrical thick shells.
    PhD, Iowa SU, 1974. DA7423769.
  5398. J Sun
    Effects of isotropic anisotropic composite liners on acoustic wave attenuation in ducts carrying transverse velocity/temperature gradients
    PhD, VPI&SU, 1975.
  5399. G Sun
    The strength of notched composite laminates and their behaviour in several environments
    Masters, Toronto, 1982.
  5400. CC Sun
    The use of holographic techniques for composite materials testing
    Masters, SDSMT, 1985.
  5401. T Sun
    Theory of magnetic susceptibility of graphite ribbons.
    PhD, Oregon, 1985. DA8605862.
  5402. G Sun
    Optimization of laminated cylinders for buckling.
    PhD, Toronto, 1986.
  5403. Wei Sun
    Constitutive modelling of composites incorporating nonlinear and three-dimensional effects
    PhD, Drexel, 1992. DA9220960. DAIB 53(3)1574.
  5404. Hongbin Sun
    Corrosion behavior of aluminum and copper metal matrix composites in chloride media
    PhD, University of Texas at Austin, 1993.  AAD9323564  DAIB54(4)2149
  5405. Ellen Ying Sun
    Fiber-reinforced glass-ceramic matrix composites for high-temperature applications: control of interfaces.
    PhD, Brown University, 1995.  AADAAI9540834  DAB56(8)4531
  5406. Xiang-Dong Sun
    Luminescence sensors for water uptake in epoxy networks and cure monitoring in polyurethane
    PhD, University of Connecticut, 1994.  AADAAI9525687  DAB56(4)2053
  5407. Rajendra Andrew Sundar
    Thermally stable poly(imide-benzoxazole)s, and modification of the interphase for glass reinforced composites
    PhD, University of Southern Mississippi, 1994.  AAD9430201  DAIB55(6)2230
  5408. V Sundaram
    Electrodeposition of polymers on carbon fibres, effects on composite properties
    Masters, Washington SU, 1977.
  5409. Ramesh Sundaram
    Influence of bulk resin properties on composite properties
    PhD, Akron, 1991. DA9208166. DAIB 52(10)5479.
  5410. Ananthapadmanaban Sundaram
    Three dimensional modelling and simulation of the curing of polymer composites
    MS, Michigan State University, 1994   AADAAI1361363  MA33(5)1549
  5411. Mannur Jaganathan Sundaresan
    Failure processes in unidirectional composite materials
    PhD, VPI&SU, 1988. DA8907520. DAIB 50(1)243.
  5412. Sulochana Sundaresan
    Calcium phosphate ceramic reinforced with ceramic fibers in bone implants
    MSEng, University of Massachusetts, 1993.  AAD1352272  MA31(4)1860
  5413. C-K Sung
    A theoretical and experimental investigation of the dynamic response of flexible mechanism systems fabricated from fibrous composite materials
    PhD, Michigan SU, 1986. DA8613340.
  5414. Yun-Mo Sung
    Development and characterization of inviscid melt spun (IMS) alumina-based ceramic fiber-reinforced composites
    PhD, University of Wisconsin - Madison, 1994.  AAD9421312  DAIB55(7)2962
  5415. P Suquet
    Plasticite et homogeneization [Plasticity and homogenisation]
    DEtat, Univ.P&M.Curie-Paris, 1982.
  5416. VR Sural
    Nonlinear viscoelastic characterisation of a randomly oriented short fibre composite
    MS, Washington University-MO, 1985.
  5417. AH Suri
    A study of structure stability using the finite element method and minimum weight design of a composite panel.
    PhD, Glasgow, 1983. DX75431/87.
  5418. Laurent Suspene
    Mise au point d'un elastomere destine a l'amelioration de la tenue a l'impact de reseaux polyester insatures [Design of an elastomer additive to improve unsaturated polyester
    resin toughness]
    Doctorate, INSA Lyon, 1989. DAC080778. DAIC 50(3)532.
  5419. M Sutchu
    An orthotropic formulation of the viscoplasticity theory based on overstress
    PhD, RPI, 1985. DA8607745.
  5420. HJ Sutherland
    Quasistatic & dynamic investigatn of fibre-reinforced viscoelastic materials
    PhD, Texas @ Austin, 1970. DA7100200.
  5421. DM Sutherlin
    Rigid-rod polyquinolines with pendant arms. I. Reactive oligomeric polyquinolines. II
    PhD, Colorado SU, 1985. DA8517321.
  5422. DR Sutliff
    Analyses of stresses in discontinuous fibre reinforced composites
    PhD, Tennessee, 1971. DA7129498.
  5423. PT Sutor
    Mechanical properties of low density mineral wool fibre composites
    Masters, Pennsylvania SU, 1975.
  5424. P Suttisornyotin
    Composite structural reliability calculation by finite element and statistical strength theory
    Masters, NPS Monterey, March 1986. AD A167 890. N86-31924.
  5425. SA Sutton
    Fatigue crack propagation in an epoxy polymer
    Masters, Illinois, 1973.
  5426. Alfred J Svobodnik
    Numerical treatment of the elastic-plastic macromechanical behavior of longfiber-reinforced metal matrix composites
    DrTechn, Technische Universitaet Wien - Austria, 1990.  AADC283050  DAIC54(2)625
  5427. R Swain
    The effect of interlayers on the mechanical response of composite laminates subjected to in-plane loading conditions
    Masters, VPI&SU, April 1988.
  5428. Robert Edward Swain
    The role of the fibre/matrix interphase in the static and fatigue behavior of polymeric matrix composite laminates
    PhD, VPI&SU, 1992. DA9220649. DAIB 53(2)927.
  5429. S Swaminathan
    Thermoplastic fibre reinforced composites based on liquid crystalline polymers
    Masters, Akron, 1988.
  5430. GJ Swampillai
    Water transmission through polyester/glass laminates.
    PhD, CNAA: Kingston (Appl.Chem), 1978. D26489/79.
  5431. Colby Corson Swan Jr
    An effective medium approach to modeling inelastic composite structures with applications to Justinian's Hagia Sophia
    PhD, Princeton University, 1993.  AAD9328060  DAIB54(5)2643
  5432. PL Sweet
    Stress concentration in graphite/epoxy composites by photostress methods
    MSCE, SDSMT, 1984.
  5433. MG Sweitzer
    On the nature of curved fibres in paper
    MS, Syracuse, 1985.
  5434. BJ Swetlin
    Fracture of highly-crosslinked epoxy networks
    PhD, Akron, 1984. DA8414671.
  5435. DG Swift
    The anelastic properties of fibre reinforced materials.
    PhD, Sheffield, 1975.
  5436. CE Swindlehurst
    Nonlinear dynamic response of unidirectionally reinforced epoxy materials in longitudinal shear
    Masters, GWU, September 1977.
  5437. Susan Jean Swindlehurst
    Characterisation of thermally treated and thermally cycled carbon/magnesium and silicon carbide/aluminium composites
    PhD, Delaware, 1991. DA9223667. DAIB 53(4)2014.
  5438. MI Syed
    Optimality criterion techniques applied to structures composed of different element types
    Masters, Clarkson CT, 1980.
  5439. MT Sykes
    The erosion of alumina and silicon carbide-reinforced alumina composites
    Masters, NCSU, 1986.
  5440. NK Szeto
    Friction and wear of metal matrix composites
    Masters, MIT, 1987.
  5441. HP Taank
    3-D finite element failure model for predicting failure in FRP bolted joints
    MSc, London: ICST&M, September 1983.
  5442. Ala Tabiei
    Buckling analysis of moderately thick laminated shells
    PhD, University of Cincinnati, 1994.  AAD9502540  DAIB55(9)3993
  5443. MS Tadfi
    The strength of an orthotropic material in the flat stressed state
    Dissertation, Kiev, 1973.
  5444. M Taefi
    Compatibility of carbon fibres with aluminium-tin coatings.
    PhD, London: QMC, 1982.
  5445. DG Taggart
    Delamination failure of laminated composite materials - a theoretical analysis
    MS, RPI, May 1981.
  5446. DF Taggart
    Chemical vapour deposition of carbon on high-performance pitch based carbon fibres
    Masters, RPI, 1987.
  5447. David George Taggart
    Processing-induced stresses and their influence on plastic deformation in composite materials
    PhD, Pennsylvania, 1989. DA8922618. DAIB 50(7)3116.
  5448. WM Tai
    Static and dynamic stress concentrations in hybrid composite materials
    Masters, Delaware, 1981.
  5449. Nyan-Hwa Daniel Tai
    Modelling of chemical vapour infiltration (CVI) in ceramic matrix composites processing
    PhD, Delaware, 1990. DA9109931. DAIB 51(11)5545.
  5450. E Taillez
    Fracture resistance of unidirectional PEEK and epoxy composites
    MSc, Cranfield IT, 1985.
  5451. Ezra Eiji Takara
    Development of a generalized zonal method for anisotropic scattering media
    PhD, California: Santa Barbara, 1991. DA9204620. DAIB 52(8)4400.
    >>> N Takata, see N Takeda.
  5452. N Takeda
    Experimental studies of the delamination mechanisms in impacted fibre-reinforced composite plates
    PhD, Florida, 1980. DA8105621.
  5453. N Takeda
    Studies of mechanical behaviour of composites under high-velocity deformation
    DrEngr, Tokyo, 1982. In Japanese.
  5454. Ramsis Taktak
    Design and validation of optimal experiments for estimating thermal properties of composite materials
    PhD, Michigan State University, 1992.  AAD9303056  DAIB53(9)4913
  5455. Gautam Gurunandan Talagery
    Simulation of wave propagation in planar anisotropic slab waveguides using the beam propagation method
    MS, University of Texas at Arlington, 1994.  AADAAI1359433 MA33(3)966
  5456. RJ Talbot
    Analysis of the dynamics of elastic structures by the finite element method
    PhD, AFIT @ WPAFB, June 1972. AFIT/DS/MC/72-1. DA7233070. AD747283.
  5457. Margaret Forchheimer Talbott
    A model of the response of thermoplastic composites to bend-forming operations
    PhD, Stanford, 1991. DA9115856. DAIB 52(1)464.
  5458. R Talreja
    Fatigue of composite materials
    PhD, TU Denmark, 1985.
  5459. A Talug
    Analysis of stress fields in composite laminates with interior cracks
    PhD, VPI&SU, September 1978. DA7904157. N79-17915.
  5460. Albert S Tam
    A deformation model for the forming of aligned fibre composites
    PhD, MIT, June 1990. DA-382089.
  5461. VP Tamuzh
    A variant of the phenomenological theory of fatigue and breakdown of polymeric materials
    Doctorate, Riga, 1973.
  5462. T-M Tan
    Wave propogation in graphite/epoxy laminate due to impact.
    PhD, Purdue, 1982. DA8300965.
  5463. SC Tan
    Matrix cracking in composites and its effect on damaged ply constitutive behaviour
    PhD, Utah, December 1983. DA8405921. N84-27052.
  5464. AL Tan
    Strength and flexibility of glass reinforced plastic pipes and pipe bends
    PhD, UMIST, August 1983. D74915/87.
  5465. S Tanary
    Characterisation of adhesively bonded joints using acousto-ultrasonics
    MAppSc, Ottawa, April 1988.
  5466. GP Tandon
    Influence of filler shape on the elastic properties of composites
    MS, Rutgers, January 1984.
  5467. GP Tandon
    Micromechanical determination of the elasticity and plasticity of composites
    PhD, Rutgers, 1986. DA8704110.
  5468. N Taneja
    Studies of water damage in polyester glass laminates
    PhD, CNAA: Kingston (Appl.Chem), November 1974. DX88541.
  5469. HYH Tang
    Compounding and recycling effects on the properties of polystyrene with and without a filler
    MASc, Toronto, 1985.
  5470. Bruce Shiu-Leung Tang
    Lamb wave propagation in laminated composite plates
    PhD, VPI&SU, 1988. DA8910959. DAIB 50(3)1078.
  5471. Kingman Tang
    Fluid mechanics of mould filling in resin transfer moulding
    MS, Lowell, 1989. MA1338283. MA 28(2)286.
  5472. Chek Ing Tang
    Long fibre reinforced thermoset injection moulding compounds
    MSc, Manchester Victoria (UMIST), September 1990.
  5473. Huanqiu Tang
    Micromechanics characterization of sublaminate damage
    PhD, Missouri - Rolla, 1990. DA9032114. DAIB 51(6)2979.
  5474. JA Tangen
    Thermal conductivity of composite materials
    Masters, RPI, 1974.
  5475. Wess Hui-Shih Tao
    Energy absorption in crushing fibre composite materials
    PhD, Michigan, 1991. DA9135702. DAIB 52(7)3848.
  5476. Shicheng Tao
    Bond of glass-fiber-reinforced-plastic reinforcing bars to concrete
    PhD, University of Arizona, 1994.  AAD9502623  DAIB55(9)4027
  5477. Edward E Tapanes
    Static and dynamic strain measurements within composite materials using a localized Michelson fiber optic sensor
    MASc, University of Toronto, 1990.  AADMM65560  MA30(4)1454
  5478. S Tarazi
    Effect of variation in bond stiffness on the stress field near a crack tip in fibre reinforced plates
    Masters, Syracuse, 1980.
  5479. L Targontsidou
    An investigation into the selective use of high elongation resin for discretely supported GRP vessels
    MPhil, Strathclyde, 1986. ASLIB 38(4)8784.
  5480. Jiann-Quo Tarn
    Elastic-plastic behaviour of unidirectional composites
    PhD, Duke, 1976. DA7711870.
  5481. R Tarprogge
    Untersuchungen zur ermittlung zulassiger beanspruchunge thermoplastischer kunststoffe bei statischer und schwindgender zugung biegebeanspruchung  [Investigation on determination of allowable stresses for thermoplastics by static and dynamic tensile and jointing stresses]
    Dissertation, TH Aachen, 1966. DS6604.
  5482. AS Tase
    Static and fatigue strength of notched graphite-PEEK fabric composites
    Masters, Delaware, 1987.
  5483. MA Tashkandi
    Optimum design of laminated fibre composite plates.
    PhD, UCLA, 1976. DA771669.
  5484. LE Taske
    Processing and mechanical characterisation of architectural effects in multi-dimensionally woven comingled graphite/PEEK composites
    Masters, Delaware, December 1988.
  5485. M Tasnon
    Approche phenomenologique de l'endommagement des materiaux composites
    [Phenomenological approach to damage in composites]
    Masters, Sherbrooke, 1985.
  5486. Kuen Tat The
    Impact damage resistance and tolerance of advanced composite material systems
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9331476  DAIB54(6)3173
  5487. Barend Jacobus Erasmus Taute
    Envelope radar cross section analysis of faired composite bodies
    PhD, Ohio SU, 1988. DA8824622. DAIB 49(9)3934.
  5488. ME-E-D Tawfik
    Field analysis of composite structures with discontinuous connections
    PhD, NCSU Raleigh, 1979. DA7923073.
  5489. M Tayal
    A finite element elastic-plastic analysis of orthotropic bodies employing hills yeild criterion
    Masters, Saskatchewan, 1973.
  5490. LC Taylor
    Heat conduction in anisotropic rectangular fins
    Masters, Maryland, 1966.
  5491. TP Taylor
    A finite element method of analysis for composite beams.
    Masters, Texas @ Austin, 1967.
  5492. C Taylor
    Failure criteria for filamentary reinforced plastics
    MSc, Cranfield IT, September 1970.
  5493. RM Taylor
    A first approximation theory to the effects of transverse shear deformations on buckling and vibration of fibre-reinforced circular cylindrical shells. Application to axial compression loading of boron and glass epoxy composites
    Masters, Stanford, 1970.
  5494. WJE Taylor
    An evaluation of the shear disc creep test for filled and unfilled thermoplastics
    MSc, Queens-Belfast, 1976!.
  5495. G Taylor
    Carbon fibre composites research: control of volatiles in epoxy resins
    MSc, Lancaster, 1983. Restricted access.
  5496. MD Taylor
    An investigation into the fracture mechanics of polymers used in engineering applications
    PhD, CNAA: Manchester Polytechnic, June 1983. D49152/84.
  5497. PM Taylor
    Mechanical properties and design for stiffness and strength with short carbon fibre reinforced thermoplastics
    MSc, Cranfield IT, 1986.
  5498. WJ Taylor
    An analytical and experimental investigation into ballistic impact into fabric
    Masters, Delaware, 1988.
  5499. Timothy William Taylor
    Transient elastic waves on anisotropic half-spaces
    PhD, Cincinnati, 1989. DA9003262. DAIB 50(8)3566.
  5500. PR Teagle
    Ultrasonic methods for determining the mechanical and physical properties of carbon fibre reinforced plastics composites.
    MTech, Brunel, 1976/8.
  5501. L Teasley
    Energy implications of polymer production and use
    MS, Washington University-MO, 1974.
  5502. Karl Andre Tebeau
    Acoustic emission, internal friction and Young's modulus in a mechanically fatigued GFRP composite and Macor, a glass-ceramic composite
    MS, Michigan SU, 1991. MA 1344221. MA 30(1)137.
  5503. JS Tedesco
    Fibrous reinforcement of acrylic bone cement
    Masters, Lowell, 1978.
  5504. JL Tegg
    Transport of water in epoxide adhesives.
    PhD, CNAA: Leicester, 1979.
  5505. CE Teh
    Dynamic behaviour and acoustic fatigue of isotropic and anisotropic panels under combined acoustic excitation and static in-plane compression
    PhD, Southampton, August 1981. D43809/82.
  5506. KK Teh
    A three-dimensional analysis of laminated composite plates using numerical methods
    PhD, Melbourne, June 1983.
  5507. G Teichmann
    Quelques aspects generaux de la theorie lineaire de coques orthotrope et inhomogene
    [Aspects of linear theory of orthotropic and inhomogeneous shells]
    Dr.sc.techn, ETH Zurich, 1979. J.Druck.Verlag. ISBN 3-260-04580-5.
  5508. JP Teixeira
    Microstructural effects in the delamination wear.
    Masters, MIT, 1976.
  5509. B Tekkanat
    Short fibre reinforced thermoplastics
    PhD, Michigan, 1987. DA8801430.
  5510. MH Telich
    Analytical prediction of mechanical behaviour and fatigue failure mechanisms in a unidirectional graphite composite
    Masters, CWRU, 1981.
  5511. MA Temple
    Evaluation of fibre reinforced rapid setting materials for highway repairs
    Masters, Texas @ Austin, 1984.
  5512. Michael A Tenace
    Optimal design of fibre composite pressure vessels
    MASc, University of Ottawa, 1990.  AADMM67992  MA31(1)427
  5513. Hong Teng
    The continuous curing process for thick filament wound composite structures
    PhD, University of Illinois at Urbana-Champaign, 1993.  AAD9411798  DAIB54(11)5758
  5514. EG Tenreiro
    <detonation testing of filament wound tubes>.
    MSc, Manchester, 1984.
  5515. Gaetano Tepedino Aranguren
    Bounds on the effective energy density of two nonlinear composites
    PhD, New York, 1988. DA8825065. DAIB 49(9)3803.
  5516. JL Teply
    Periodic hexagonal array models for plasticity analysis of composite materials
    PhD, Utah, 1984. DA8409545.
  5517. Johannes Hermannus ter Haar
    Powder metallurgical processing of fibre-reinforced aluminium composites
    Dr, Technische Universiteit te Delft, 1993.  AADC332039  DAIC55(1)294
  5518. B Terwiesch
    Entwicklung eines Verfahrens zur Herstellung hochfester unidirektional mit Kohlenstoffasern verstaerkter Kohlenstoffkorpern [Fabrication process for manufacture of high strength unidirectional carbon fibre reinforced carbon composites]
    Dipl.Chem, Karlsruhe, 1972.
  5519. Mark Andrew Tesh
    The effects of a hygrothermal environment on the buckling of a composite beam-column undergoing large deflections
    MSE, Florida Atlantic, 1989. MA1338302. MA 28(2)307.
  5520. A Tessler
    Effects of viscous damping on vibratory motions of laminated orthotropic plates
    Masters, UCLA, 1976.
  5521. MF Testa
    An investigation into utilising dynamic impact testing as a means to detect interlaminar flaws in laminated composite plates
    Masters, Pittsburgh, 1988.
  5522. J Teuwen and E Weyers
    3-D fabric composites
    Ind Eng Gp T, Leuven, 1990. In Dutch.
  5523. P Thacker
    A study of the initiation and growth mechanisms of carbon fibres
    Masters, Worchester PI, 1983.
  5524. YR Thakar
    Dynamic response of curved laminated plates subjected to low velocity transverse impact
    Masters, CSULB, 1982.
  5525. AB Thakker
    Viscoelastic characterisation of angle ply advanced composites
    PhD, VPI&SU, 1974. DA7511951. N75-26027.
  5526. V Thammongkol
    Electrostatic fluidised bed prepregging of carbon fibre with PEEK
    MS, Georgia IT, June 1989.
  5527. S Thangjitham
    Probabilistic service life prediction of composite viscoelastic cylindrical structure using random outdoor environment
    PhD, VPI&SU, 1984. DA8507217.
  5528. BM Thanki
    Study of volatile compounds derived from polyester and epoxy resins
    PhD, CNAA: Thames, March 1983. D46410/83.
  5529. H Thapar
    Preferred orientation development in polymers
    PhD, Brunel, October 1985. DX85273.
  5530. Kuen Tat The
    Impact damage resistance and tolerance of advanced composite material systems
    PhD, Virginia Polytechnic Institute & State University, 1993.  AAD9331476  DAB54(6)3173.
  5531. J Thebault
    Vapodeposition chimique du bore. Application a l'etude des interactions fibre-matrice dans les materiaux composite a base de titane et de fibres de bore
    [CVD of boron: application to study of fibre-matrix interactions in composite materials with B fibres in Ti matrix]
    DSci.Phys, Bordeaux-I, 25 February 1977. Thesis #519.
  5532. U Thebing
    Beitrag zur dimensionierung von GF-UP unter wechsesnden beanspruchungen
    [Design of glassfibre reinforced polyester for alternating stress]
    DIng, RWTH Aachen, 29 May 1979. DS7709.
  5533. George Henry Thiel
    Linear and nonlinear analyses of thick composite circular plates using the finite element method
    PhD, UIUC, 1991. DA9211010. DAIB 52(11)5920.
  5534. G Thierauf
    Ein elementarer Weg zur Berechnung von Beulwerten orthotroper und isotroper Rechteckplatten
    [An elementary method for calculation of buckling value for orthotropic and isotropic rectangular plates]
    PhD, TH Munchen, January 1969.
  5535. A Thionnet
    Prevision d'endommagement sous chargements quasi-statiques et cycliques des structures composites stratifies [Previewing damage in static and cyclic loading on composites]
    Thesis, Paris VI, 1991.
  5536. BE Thirlwell
    Tensile properties of non-woven fabrics.
    MScTech, Manchester, 1964.
  5537. JN Thomas
    Mechanics of fibre-reinforced materials
    PhD, Nottingham, 1974. D16830/76.
  5538. J Thomas
    Characterisation of a class of composite beams
    Masters, Texas @ Arlington, 1981.
  5539. JO Thomas
    Elastic and inelastic constitutive models for fabric reinforced composites
    PhD, Columbia, May 1982. DA8222496. N83-13480.
  5540. RD Thomas and CW Cable
    Quality assurance of glass reinforced plastic ship hulls in naval applications
    Masters, MIT, June 1985. AD A158 967.
  5541. Lewis J Thomas
    Ultrasonic backscatter: a quantitative index of elastic properties of inherently inhomogeneous media
    PhD, Washington University-MO, 1985. DA8520815. DAIB 46(7)2345. N86-21278.
  5542. David John Thomas
    Analysis of the progressive failure of brittle matrix composites
    PhD, State University of New York at Buffalo, 1994.  AAD9420219  DAIB55(3)1152
  5543. Warren Andrew Thomas
    Influences of crack closure and interfacial strength on the tensile fatigue behavior of a Nicolson/gas composite
    PhD, University of Texas at Austin, 1994.  AADAAI9519404  MA56(2)1043.
    >>> DJ Thomas, see RH Luckin-Smith.
  5544. GL Thompson
    Computation of vibration modal shapes and natural frequencies of a general orthotropic-laminated thin shell using finite elements
    PhD, Oklahoma, 1971. DA7126561.
  5545. Ian Thompson
    Mechanical properties of silicon carbide whisker and particulate-reinforced-alumina composites
    MSc, Queen's University at Kingston, Canada, 1991.  AADMM67098  MA30(4)1455
  5546. Charles Nathaniel Thompson
    The effect of bonding on waves in laminated plates
    PhD, University of Nottingham, 1992.  AADC331771  DAIC55(1)223
  5547. M Thomsen
    Increasing the thermal conductivity of filled epoxy.
    Masters, Iowa, 1966.
  5548. LW Thomson
    An analysis of stresses around a crack located between two anisotropic materials
    Masters, University of Washington-WA, 1986.
  5549. B Thorfinnson
    The relationship between prepreg impregnation and laminate porosity in advanced composites
    Masters, Louisville, 1987.
  5550. A Thorgeirsson
    Sensitization capacity of epoxy resin compounds.
    Dissertation, Lunds-Sweden, 1977.
    >>> MG Thorton, see NAD Murphy.
  5551. Zhengfei Tian
    The fracture behaviour of carbon/epoxy laminates containing part through-the-thickness fibre breakage
    PhD, Utah, 1991. DA9128091. DAIB 52(4)2263.
    >>> W Tiao-Ming, see TW Wu.
  5552. Amer Tiba
    The reinforcement of a denture base polymer with a surface modified high modulus fiber
    MS, Eastern Michigan University, 1992.  AAD1347510  MA30(4)1347
  5553. D Tidone
    Fatigue behaviour of short glass fibre reinforced pbt composites
    Masters, Connecticut, 1979.
  5554. Shari Lynne Tidrick
    Investigations of the silane/epoxy matrix interphase for silane coupling agent blends of varying composition
    PhD, CWRU, 1991. DA9202235. DAIB 52(10)5300.
  5555. AM Tiefenthaler
    Surface studies of fibres for composite applications
    Masters, NDSU, 1988.
  5556. TT Tien
    The effect of matrix composition on the growth kinetics of Nb3Sn formed in filamentary (Cu-Sn)-(Nb-Zr) composites
    Masters, Texas @ Austin, 1975.
  5557. C Tien
    Weight average molecular weight determination of linear epoxy resin
    Masters, Nebraska, 1980.
  5558. L-J Tierney
    Limit theorems for the failure times of bundles of fibres under unequal load sharing
    PhD, Cornell, 1980. DA8020895.
  5559. HL Tighzert
    <epoxy matrix system for CFRP>
    These Docteur es Science, Lyon, 1982.
  5560. AL Tilmans
    Effect of radiation on the adhesive properties of epoxy-metal and epoxy-glass adhints
    PhD, Carnegie-Mellon, 1968. DA6817617. N70-19306.
  5561. Neelesh Balkrishna Timble
    Structural factors affecting interfacial forces in fabrics
    PhD, North Carolina State University, 1993.  AAD9409168  DAIB54(11)5924
  5562. S Ting
    The statical method of designing axisymmetric sandwich plate subject to alternative loads
    PhD, Iowa, 1975. DA7613453.
  5563. KZ Tipton
    An experimental investigation of the buckling of graphite/epoxy wide sandwich columns
    MS, MIT, 1979.
  5564. SG Tirrell
    Compositional quenching of phenolic resins for impact modification
    Masters, RPI, 1988.
  5565. TW Tisler
    Collapse analysis of cylindrical composite panels with large cutouts under an axial load
    Masters, AFIT, December 1986. AFIT/GAE/AA/86D-18. AD A179 112. N87-23701.
  5566. WP Tiu
    Fatigue strength prediction of adhesively bonded unidirectional carbon fibre reinforced composite joints.
    PhD, London: City, July 1987. DX80615. ASLIB 37(2)3960.
  5567. Rajesh Tiwari
    Thermal spray-forming of metals and their composites
    PhD, State University of New York at Stony Brook, 1992.  AAD9232770  DAIB53(6)3102
  5568. Anil Tiwari
    The development of an interpretive methodology for the application of real-time acousto-ultrasonic NDE technique for monitoring damage in ceramic composites under dynamic loads
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9414096  DAIB54(12)6293
  5569. Prijatmadi Tjiptobroto
    Tensile strain hardening of high-performance fibre-reinforced cement-based composites
    PhD, Michigan, 1991. DA9124126. DAIB 52(3)1608.
  5570. AM Tobias
    Designing for strength and fatigue in polyester SMC's.
    PhD, Nottingham, May 1984. D51572/84.
  5571. FERL Tobing
    Finite element analysis of moisture and external load effects in composites
    PhD, RPI, May 1983. DA8321205. N84-15211.
  5572. GL Tobon
    Variational plane wave methods in  analysis of propagation of elastic waves in composite materials
    MSc, Cornell, 1971.
  5573. DM Todd
    Strength of composite beams with web openings
    Masters, Kansas SU, 1979.
  5574. SL Toh
    Collapse of cylindrical orthotropic shells.
    PhD, Strathclyde, 1980. D35166/81.
  5575. Mitsugu Tohdoh
    Mode I fracture modeling of elastomer toughened polymers:  adhesive joints and composite materials
    PhD, Ohio State University, 1995.  AADAAI9526095  DAB56(4)2269
  5576. ME Tohlen
    Stacking sequence effects on free edge induced failure in a laminated composite
    Masters, Texas @ Arlington, 1985.
  5577. EW Tokarsky
    The relationship of structure to properties in carbon fibres
    PhD, RPI, October 1973. DA7412799.
  5578. SW Toland
    Methods of analysis for anisotropic media.
    Masters, Georgia IT, 1969.
  5579. Alberto Toledano
    High-order mixture homogenization of periodic nonlinear composites
    PhD, UCSD, 1989. DA8925096. DAIB 50(7)3004.
  5580. G Tolf
    Mechanical macro- and microproperties of fibre composites.
    Doctoral thesis, KTH Stockholm, 1983.
  5581. Staffan Toll
    Microstructure and mechanical properties of injection moulded composites
    Tekn Dr, KTH Stockholm, 1991. DA-C242076. DAIC 53(3)578.
  5582. Manolis M Tomadakis
    Transport and structural properties of fiber-reinforced composites and porous media of fibrous or capillary structure
    PhD, University of Rochester, 1993.  AAD9405890  DAIB54(12)6350
  5583. John S Tomblin
    Compressive strength models for pultruded glass fiber reinforced composites
    PhD, West Virginia University, 1994.  AADAAI9543438  DAB56(8)455`
  5584. AE Tomez
    Graphite/polymer composites: application in touch sensors.
    Masters, Pennsylvania, 1984.
  5585. SK Tome
    Anisotropic finite element analysis of a pseudo-cylindrical polyhedral shell
    Masters, Hawaii, 1986.
  5586. GD Tomkinson-Walles
    Damage detection during the fatigue of short fibre thermoplastic composites
    MS, RPI, 1986.
  5587. GR Tomlin
    Numerical analysis of continuum problems in zoned anisotropic media
    PhD, Southampton, 1972.
  5588. SS Tompkins
    Analysis of moisture absorption and diffusion in fibre reinforced polymeric resin-matrix composite materials
    PhD, Old Dominion, May 1978. DA7813917. N78-32184.
  5589. RD Tonda
    Techniques for characterising damage zones in composite materials
    PhD, TA&MU, 1987. DA8802148.
  5590. MM Toney
    On the mechanical behaviour of twisted synthetic ropes
    Masters, MIT, 1986.
  5591. O Tong
    Crack problems of a sandwich orthotropic laminate composite.
    MS, Xian Jiaotong Univ-China, March 1985.
  5592. Yihong Tong
    Effect of interface on thermo-mechanical properties of composites
    PhD, Michigan SU, 1991. DA9129509. DAIB 52(5)2642.
  5593. Jie Tong
    Finite element analysis of a thick-walled cylinder with a reinforced nozzle
    MS, California State University - Fullerton, 1994.  AAD1357237  MA32(6)1697
  5594. EA Topolewski
    Some exact solutions in the design of technically orthotropic axisymmetric plates
    Masters, Illinois IT, 1968.
  5595. JCM Torfs
    Ultra-strong polyethylene fibres produced by crystallisation from flowing solutions
    Doctorate, Groningen Rijksuniversiteit(NL), January 1983.In English. PB87-134110.
  5596. LP Torre
    A dielectric and dynamical mechanical study of epoxy crosslinked organotin polyesters
    PhD, Washington SU, 1984. DA8413909.
  5597. Luigi Torre
    Degradative processes in polymer composites
    PhD, University of Washington, 1994.  AADAAI9523769  DAB56(3)1459
  5598. HF Torshizi
    Engineering properties of fibre treated asphalt mixtures
    Masters, Texas @ Austin, 1986.
  5599. B Torstenfelt
    Finite elements in contact and friction applications.
    PhD, Linkoping-Sweden, August 1983. Dissertation #103.
  5600. TE Touchstone
    Moire analysis of strain in composite materials.
    Masters, TA&MU, 1984.
  5601. Houssam A Toutanji
    The development of cementitious composite axial tensile technique and its application to carbon fiber-reinforced cementitious composites
    PhD, Worcester Polytechnic Institute, 1992.  AAD9303412  DAIB53(10)5349
  5602. KJ Towell
    Some aspects of the aerodynamics of a forward swept wing with particular reference to vertical take-off aircraft
    MSc, Cranfield IT, unpublished circa 1981/82.
  5603. H Toyoda
    Transmission of acoustic waves through composite plates.
    Masters, Pennsylvania SU, 1969.
  5604. KL Trachte
    The brittle fracture of thermoplastic polymers and composites
    DSc, Washington University-MO, 1970.
  5605. JJ Tracy
    The effect of delamination on the response of advanced composite laminates
    PhD, California: Irvine, 1987. DA8803633.
  5606. DL Trafford
    Computer analysis and simulation of the mould filling process for Hele-Shaw flows
    Masters, Delaware, 1986.
  5607. Daniel John Trahan
    Characterisation and enhancement of the damping within composite beams
    MS, Michigan SU, 1991. MA1344223. MA 29(4)708.
  5608. KD Tran
    Structure and flow properties of glass fibre filled thermoplastics
    Masters, McGill, 1979.
  5609. Eric Trung Tran
    Postbuckling behaviours of rectangular composite plates with simply supported boundary condition
    MSE, CSULB, 1990. MA1342856. MA 29(3)468.
  5610. JA Trapp
    Thermomechanical constrainsts and materials reinforced with cords
    PhD, UC: Berkeley, 1970. DA7109942.
  5611. BC Trask
    Response of carbon/epoxy laminates to biaxial stress
    Masters, Utah, 1987.
  5612. M Tratt
    <S-N curves of aligned fibre composites>
    MASc, Toronto, 1983.
  5613. BR Trethewey
    Mode II interlaminar fracture of composite materials
    Masters, Delaware, December 1986.
  5614. Bruce Rodney Trethewey
    Mechanics and performance of composite laminates with discontinuous internal plies
    PhD, Delaware, 1989. DA9019294. DAIB 51(5)2584.
  5615. H Tretout
    Effect of fibre orientation and laminate geometry on the dynamic properties & fatigue resistance of carbon fibre reinforced plastic plates
    MSc, ISVR Southampton, 1978.
  5616. TC Triantafillou
    Failure mode maps and minimum weight design for structural sandwich beams with rigid foam cores
    MSCE, MIT, 1987.
  5617. Michael Harry Triche
    Finite element modelling of parallel aligned wood strand composite
    PhD, Purdue, 1988. DA8900744. DAIB 49(10)4453.
  5618. Kimberley Ann Trick
    Reaction kinetics of the pyrolysis of phenolic/carbon composite materials
    PhD, University of Dayton, 1994.  AADAAI9521243  DAB56(3)1656
  5619. BYu Trifel'
    Investigation of fracture laws for glass reinforced plastics
    Dissertation, Moscow, 1964.
  5620. MJ Trinko
    Periodic stress fields with corner singularities in a two dimensional composite
    PhD, Wisconsin, 1972. DA7219009.
  5621. Akshay Himatlal Trivedi
    Spaced-lattice model and derivation of effective medium conductance in a particle/polymer composite system
    MS, Texas A&I University, 1991. MA1346616. MA 30(2)364.
  5622. NM Trivisonno
    Electrostatic effects in the adhesion of polyester resin to glass
    PhD, Case IT, 1958.
  5623. J-P Trottier
    Fibrous composite materials with a metallic matrix.
    PhD, Paris, 1970. ONERA-NT-170. N71-33723.
  5624. IA Troyan
    Effect of loading frequency on fatigue of material.
    Dissertation, Kiev, 1962.
  5625. V Truong
    Transient heat transfer in laminated composites- an experimental study
    PhD, Massachusetts, 1975. DA7527557.
  5626. KC Tsai
    Some contact problems of composite materials in elasticity.
    PhD, NWU, 1973. DA7330746.
  5627. WT Tsai
    Analysis of thin laminated shells by the finite element methods
    Masters, Tennessee TU, 1978.
  5628. GC Tsai
    Compression failure analysis of glass fibre reinforced epoxy
    Masters, Tennessee TU, 1980.
  5629. S-D Tsai
    The characterisation of the interface in graphite-aluminum composite systems
    PhD, Texas @ Arlington & Austin, 1980. DA8109255. N81-24176.
  5630. G-C Tsai
    A study of frequency effects and damage accumulation during fatigue of graphite/epoxy and glass/epoxy composite material
    PhD, Purdue, 1984. DA8500447. N85-23930.
  5631. LJ Tsai
    The stress distribution of the FRP pressure vessel by using ANSYS program
    Masters, NJIT, 1986.
  5632. William Jeng-Yang Tsai
    Effect of porosity on delamination of resin-matrix composites
    ScD, MIT, 1988. DA-379509.
  5633. WL Tsai
    The effect of WC grain size and cobalt content on properties and electrical discharge machining of WC-Co composites
    Masters, TA&MU, 1988.
  5634. Ming-Yi Tsai
    Applications of localised hybrid [Moire interferometry] methods of stress analysis to some problems in the mechanics of composites
    PhD, VPI&SU, 1990. DA9116652. DAIB 52(1)336.
  5635. Ching Yi Tsai
    Modeling and analysis of the forced-flow thermal gradient chemical vapor infiltration process for fabrication of the ceramic matrix composites
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9331477  DAIB54(6)3308
  5636. Wen-Bin Tsai
    Inclusion models of tensile fracture in fiber-reinforced brittle-matrix composites
    PhD, Northwestern University, 1993.  AAD9415827  DAIB55(1)6644
  5637. Inlin Tsao
    The rheological behaviour of injection mouldable silicon carbide whisker-reinforced reaction bonded silicon nitride composites
    PhD, Rutgers SUNJ New Brunswick, 1990. DA9034962. DAIB 51(7)3528.
  5638. Cho-Liang Tsai
    Characterisation, damage mechanics and damage development of composite materials
    PhD, NWU, 1991. DA9129078. DAIB 52(5)2642.
  5639. Pui Ho Wilson Tsang
    Impact resistance and damage tolerance of composite sandwich panels
    PhD, Massachusetts Institute of Technology, 1994.  AAD0575062  DAIB55(5)1928
  5640. AG Tsarnas
    Fracture toughness of short fibre reinforced composites.
    DSc, Washington University-MO, 1982. DA8314012.
  5641. L-R Tsau
    Finite element analysis of composite laminates
    PhD, Minnesota, 1987. DA8802424.
  5642. William Tsaw
    An embedded fibre optic for damage growth monitoring in Kevlar composites
    MASc, University of Toronto, 1993.  AADMM83501  MA32(3)1045
  5643. MK Tse
    Improvement of the interlaminar shear strength of composites by plasma polymerisation on graphite fibres
    Masters, MIT, 1980.
  5644. MK Tse
    A nondestructive technique for detection and characterisation of flaws in polymeric materials
    PhD, MIT, 1981.
  5645. PC Tse
    Failure of filament wound glass reinforced plastic tubes under complex stresses
    PhD, UMIST, 1983. Thesis: P2887.
  5646. KW Tse
    Electrical conductivities of fibre reinforced composites.
    PhD, Clarkson CT, 1984. DA8412611.
  5647. M Tse
    Design cost model for advanced composite structures
    MS(ME), Massachusetts Institute of Technology, September 1992
  5648. Ting-Tsai Tseng
    Buckling of elastic fibres in a composite plate with viscoelastic matrix
    PhD, Ohio SU, 1973. DA7318959.
  5649. SF Tseng
    Finite element analysis of unsymmetrically laminated rectangular plates
    Masters, Old Dominion, 1974.
  5650. WW Tseng
    Relationships between processing, structure, fatigue crack growth and J-integral fracture toughness of neat poly-ether-ether-ketone
    PhD, Texas @ Arlington, 1986. DA8711621.
  5651. Shi-Chang Tseng
    Simulation of the thermomechanical behavior of fiber reinforced thermoset composites
    PhD, University of Wisconsin - Madison, 1993.  AAD9330202  DAIB54(9)4887
  5652. Kuang-Hui Tseng
    Effective elastic and elastoplastic behavior of composite materials with randomly dispersed interacting microcracks or inhomogeneities:  statistical micromechanical formulations and computational aspects
    PhD, Princeton University, 1995.  AADAAI9519150  DAB56(2)910
  5653. T-H Tsiang
    Damage development in fibre composites due to bearing loads
    Sc.D, MIT, February 1983.
  5654. M Tsiaparis
    Production of phenol-formaldehyde resin composites.
    PhD, Aston, May 1983. D57949/85.
    >>> C Tsing-Yuan, see TY Chu.
  5655. FKW Tso
    On a laminated orthotropic shell theory including transverse shear deformation
    PhD, UCLA, 1971. DA7202928.
  5656. Thomas Karl Tsotsis
    Effects of moisture on composite materials
    PhD, TA&MU, May 1989. DA8921783. DAIB 50(6)2592.
  5657. H-S Tsou
    Water transport into epoxy resins and composites
    PhD, Purdue, 1987. DA8814530.
  5658. Hwa-Tsu Tsou
    Plasma-assisted chemical vapor deposition: a novel approach to thermal protection of composite materials
    PhD, Auburn University, 1993.  AAD9402101  DAIB54(8)4343
  5659. Nobuyuki Tsuji
    The drapability of aligned discontinuous fiber composites
    PhD, Stanford University, 1995.  AADAAI9535680  DAB56(6)3309
  5660. Yen Tu
    Three-dimensional solution-adaptive grid generation of composite configurations
    PhD, Mississippi SU, 1989.  DA8917084.  DAIB 50(4)1519.
  5661. Wen-Chiang Tu
    Powder processing of fiber reinforced ceramics:  strengthening of the powder matrix without shrinkage
    PhD, University of California - Santa Barbara, 1994.  AAD9500306  DAIB55(8)3531
  5662. Wei-Hsing Tuan
    Sintering stresses and the fabrication of ceramic composites
    PhD, Leeds, June 1988. D84717. DAIB 49(12)5482.
    >>> PD Tuang, see Pham Dunag Tuang.
  5663. LI Tuchinskii
    Study of prepartion and of properties of composites reinforced by refractory fibres
    Thesis, IPM AN USSR, Kiev, 1968.
  5664. CL Tucker
    Reaction injection moulding of reinforced polymeric parts
    PhD, MIT, September 1977.
  5665. RD Tucker
    Formulation of an efficient triangular plate element for laminate analysis
    Masters, TA&MU, 1985.
  5666. WC Tucker
    Effects of seawater on graphite/polymer composites
    PhD, Rhode Island, 1987. DA8800161.
  5667. Stephane Tuffe
    Elaboration et caracterisation de materiaux composites a haute durete et haute tenacite: alumine/whiskers de SiC; composites base borures
    [Elaboration and characterisation of materials having both high hardness and high toughness: SiC whiskers in alumina/boride matrix]
    Doctorate, INSA Lyon, 1991. DA-C217679. DAIC 53(2)375.
  5668. AV Tungare
    Chemorheological characterisation and processing of polymer composites for microelectronic packaging
    Masters, Syracuse, 1986.
  5669. Aroon Vishwanath Tungare
    Curing chemistry-network property-chemorheology relations in bismaleimide resins
    PhD, Syracuse, 1990. DA9126130. DAIB 52(4)2182.
    >>> C Tung-Lai, see TL Chao.
  5670. Sylvain Turenne
    Etude de la resistance a l'erosion de divers composites a matrice d'aluminium
    PhD, Universite Laval - Canada, 1992.  AADNN79312 DAIB54(6)3313
  5671. H Turgay
    Edge effects in laminated or stiffened cylindrical shells.
    Masters, Lowell, 1973.
  5672. Dogan Turhan
    Dynamic theory for directionally reinforced composites
    PhD, NWU, June 1970. DA7101992.
  5673. MD Turner
    Comparison of static and dynamic test methods for determining the stiffness properties of graphite-epoxy laminates.
    SM, MIT, June 1979.
  5674. J Turner
    Ultrasonics in glass reinforced plastic composite investigations
    MPhil, Brunel, 1983.
  5675. GJ Turvey
    A contribution to the elastic stability of thin-walled structures fabricated from isotropic and orthotropic materials.
    PhD, Birmingham, 1971.
  5676. MYa Tutan
    Investigation of acoustic emission during the loading of glass-reinforced plastic
    Dissertation, Tech.Sci-Riga, 1976.
  5677. ME Tuttle
    Accelerated viscoelastic characterisation of T300/5208 graphite/epoxy laminates
    PhD, VPI&SU, 1984. DA8417839. N85-12091. VPI-E-84-9.
  5678. PA Tutton
    Biaxial testing of carbon fibre composite laminates.
    PhD, Cambridge, September 1982. D52384/84.
  5679. Naki Tutuncu
    Thermal stresses and deformations in composite thin-walled and thick-walled tubes and shells
    PhD, RPI, 1991. DA9202215. DAIB 52(8)4302.
  5680. Andrey Tverdokhlebov
    A new approach to bulk wave propagation in anisotropic media
    PhD, Drexel, 1989. DA8918963. DAIB 50(5)2018.
  5681. Thomas E Twardowski Jr
    Some molecular contributions and curing considerations:  physical properties of thermoset network materials
    PhD, University of Illinois at Urbana-Champaign, 1992.  AAD9236612  DAIB53(7)3509
  5682. WR Tyson
    Fibre reinforcement of metals
    PhD, Cambridge Pembroke, 1964.
  5683. LA Tyurikova
    Examination of the generation of radiowaves and other phenomena accompanying gas discharge in disruption of adhesive contact of polymers
    Dissertation, Chem.Sci.Moscow, 1973.
  5684. U Tzadka
    Approximate calculation of the longitudinal shear modulus in composite materials
    MSc, Ben Gurion: Negev, 1979. In Hebrew.
  5685. Jerome TS Tzeng
    A model of the winding and curing processes for filament wound composites
    PhD, VPI&SU, 1988. DA8907522. DAIB 50(1)325.
  5686. J Tzou
    Structure and properties of high-performance fibres
    PhD, Leeds, July 1988. D88099.
  5687. N Ueda
    Prediction of electrical conductivity of misoriented short fibre composites by a percolation model
    Masters, Delaware, 1985.
  5688. Y-J Ueng
    Theoretical and experimental investigation of stress-wave attenuation in models of fibre reinforced composite materials.
    Masters, Maryland, 1972.
  5689. BT Uffen
    An experimental investigation of thermal vacuum effects of graphite/epoxy composites
    Masters, Toronto, 1979.
  5690. SCO Ugbolue
    Studies on the mechanical properties of procion-dyed cotton fabrics
    MSc, Strathclyde, 1971!.
  5691. SCO Ugbolue
    The dimensional properties, tensile deformation and elastic recovery behaviour of plain-knitted fabrics
    PhD, Strathclyde, 1974. D5064/75.
  5692. Yusuf Ulcay
    The effect of surface treatment on the bonding properties of Spectra fibres for use in composite structures
    PhD, Maryland, 1989. DA9021595. DAIB 51(3)1475.
  5693. S Ulku
    The design of structures using glass reinforced polyester.
    PhD, Bath, 1982. D42589/82.
  5694. DA Ulman
    Nondestructive evaluation of damage in metal matrix composite materials
    Masters, VPI&SU, May 1980.
  5695. Christophe Ulrich
    Comportement dynamique de structures unidimensionnelles composites et amorties
    [Damping and mechanical behavior of composite materials:  ski application]
    PhD, Institut National des Sciences Appliques de Lyon, 1992.  AADC383602  DAIC56(1)293. INSA
  5696. Venkatakrishnan Umamaheswaran
    An experimental ejection force study of glass filled polycarbonate
    MSEng, Lowell, 1991. MA1345253. MA 30(1)142.
  5697. JR Umaretiya
    <free vibration of hybrid laminates>
    MTech, IIT Kanpur, 1983.
  5698. Sohail A Umar-Khitab
    Application of the finite element method to laminated fiber composites
    PhD, McMaster University - Canada, 1991.  AADNN76261  DAIB54(2)1040
  5699. Yuya Umezu
    Post-elastic failure behavior in fiber reinforced ceramic matrix composites
    PhD, Rutgers the State University of New Jersey, 1995.  AADAAI9537651  DAB56(7)3967
  5700. A Unal
    A study of axially-symmetric motions of periodically laminted composite cylinders
    PhD, Stanford, 1973. DA7320519.
  5701. WJ Unger
    Using lamination to enhance rotating disc damage tolerance
    Masters, Toronto, 1985.
  5702. William James Unger
    Reduction of the free-edge effect in fibre-reinforced thermoplastic laminates by localized reconsolidation
    PhD, University of Toronto, 1993.  AADNN82795  DAIB54(9)4794
  5703. AR Upadhya
    A study of the buckling behaviour of composite reinforced metal panels and composite plain channel section columns in compression
    PhD, Cranfield IT, September 1980. D36379/81.
  5704. LJ Updyke
    Mechanical properties of some wood-plastic combinations prepared by a radiation process
    Masters, W.Virginia, 1966.
  5705. ZT Upitis
    Study of fracture processes in multilayered composites as a function of reinforcement structure
    CSc, Tech.Sci-Riga, 1980.
  5706. Eliane Urbaczewski-Espuche
    Influence de la nature des prepolymeres diepoxydes et comonomeres sur la reactivite et les proprietes des reseaux. Application a l'enroulement filamentaire et a la tenue en fatigue des composites unidirectionnels
    [Influence of the nature of epoxy precursors on the reactivity and properties of networks.  Application to fatigue resistance of filament wound unidirectioanl composites]
    DE, INSA Lyon, 1989. DA-C110333. DAIC 51(1)114.
  5707. GA Urquhart
    Thermal and optical characterisation of polycyclohexylene cyclohexandicarboxamides and polyphenyleneterephthalamides and their derivatives
    Masters, Texas @ El Paso, 1983.
  5708. K Uske
    Untersuchungen uber den Einsatz von Flechtmaschinen zur Fertigung von Bauteilen aus Faserverbundwerkstoffen
    Unpublished Diploma, IKV Aachen, 1988.
  5709. Mohammad Usman
    Large deformations and solid-fluid interactions in idealized composites modelled in the context of mixture theory
    PhD, Michigan SU, 1989. DA9018758. DAIB 51(2)950.
  5710. LM Ustinov
    Studies of mechanical properties and the macromechanism of fracture of tungsten fibre reinforced copper
    Thesis, IMET AN SSSR, 1968.
    >>> BD Uston de Villereglan, see B D'Uston.
  5711. A Uten'kin
    Investigation of the mechanical properties of compact bone tissue as an anisotropic material
    Dissertation, Riga, 1974.
  5712. Wisit Utisayapongsa
    Experimentation and analysis of corrugated fibre-reinforced plastic diaphragms
    PhD, Texas @ Arlington, 1988.  DA8914121.  DAIB 50(4)1556.
  5713. CC Utzig
    Epoxy composite bearing systems
    Masters, Vanderbilt, 1985.
  5714. Rajendra Uddhav Vaidya
    A metallic-glass ribbon reinforced glass-ceramic matrix composite
    PhD, Michigan SU, 1991. DA9129510. DAIB 52(8)4414.
  5715. Uday Kumar Vaidya
    Nondestructive evaluation of graphite fiber based composites using acoustic and vibration techniques
    PhD, Auburn University, 1993.  AAD9328452  DAIB54(5)2719
  5716. Krishnan Ranji Vaidyanathan
    Investigation of forced and isothermal chemical vapor infiltrated silicon carbide/silicon carbide ceramic matrix composites
    PhD, North Carolina State University at Raleigh, 1992.  AAD9230614  DAIB53(6)3103
  5717. Srinivasan Vaidyaraman
    Non-linear control of revolute-prismatic flexible robotic manipulator fabricated from advanced composite materials
    MS, Nevada - Reno, 1990. MA1342467. MA 29(2)315.
  5718. V Vaikakul
    The structural use of particle board reinforced with fiberglass
    Masters, Manitoba, 1975.
  5719. Utpal Mahendra Vakil
    Analysis of structure-mechanical property relations in crosslinked epoxies
    PhD, Syracuse, 1990. DA9126131. DAIB 52(4)2182.
  5720. PG Valentine
    Strength and thermal shock resistance of SiC-BN composites
    Masters, AFIT @ WPAFB, December 1983. AFIT/GAE/AA/83D-27. AD A136 891. AD E750 159. N84-19485.
  5721. DA Valia
    The effect of acid-base interactions on the interfacial adhesion and mechanical properties of polymer composites.
    PhD, Lehigh, 1987. DA8714688.
    >>> AK Valian, see A Keshavarz-Valian.
  5722. RA Valicenti
    The design and construction of an ultrahigh mileage vehicle, utilising advanced composite materials
    Masters, RPI, 1982.
  5723. Tomas Valis
    Localised and distributed fibre optic strain sensors embedded in composite materials
    PhD, Toronto, 1991. DA-NN65792. DAIB 53(2)1002.
  5724. RR Valisetty
    Bending of beams, plates and laminates: refined theories and comparative studies
    PhD, Georgia IT, March 1983. DA8315362. N84-14540.
  5725. Pekka Kalevi Vallittu
    Factors contributing to the fracture of an acrylic resin based denture:  a study to improve the mechanical properties of polymethylacrylate with continuous fibres
    DDS, Kuopion Yliopisto, Finland 1994.  AADAAIC440869  DAC56(4)963.
    >>> QL Van, see Q Le Van.
  5726. Patrick Guido Van Bladel
    Design of fibre reinforced composite panels for aerospace applications
    Dr. Technische Universiteit Te Delft, 1995.  AADAAIC423432  DAB56(3)763
  5727. PJC van Blaricum
    Finite element analysis of layered orthotropic bodies of revolution using linear and isoparametric elements.
    Masters, Illinois, 1974.
  5728. W van den Brande
    Eindige elementenanalyse van het dynamische gedrag met materiaal niet-lineareiten
    [Finite element analysis of dynamic behaviour of nonlinear material
    Afstudeerwerk, VUB, 1983.
  5729. DJ VandenBrink
    Quasi-Newton algorithms for large-scale nonlinear systems
    PhD, VPI&SU, December 1983.
  5730. PS Vanderkley
    Mode I -mode II delamination fracture toughness of a unidirectional graphite/epoxy composite
    MS, TA&MU, December 1981. MM-3724-81-15.
  5731. D van der Sanden
    Analyse van een eindig element voor komposietschalen
    [Finite element analysis for composite shells]
    Afstudeerwerk, VUB Brussels, 1983.
  5732. JA Vanderschuren
    Prediction of the strength of short fibre composites with moulded in holes
    Masters, Delaware, 1984.
  5733. Leon Scott van Dyke
    Electronically conductive polymer composites and microstructures
    PhD, Texas A&M University, 1993.  AAD9403599  DAIB54(8)4185
  5734. PR Vaney
    Optimisation of a composite scissor assembly for a helicopter upper control system
    Masters, RPI, 1984.
  5735. GA Van Fo Fy
    Osnovy teorii polimernykh tel s orientirovanoj strukturoj
    [The foundations of the theory of polymer bodies reinforced by oriented fibres]
    Doctorate, Inst.Mekhaniki AN USSR - Kiev, 1965.
  5736. H Vangerko
    Temperature dependant elastic constants of CFRP
    PhD, Birmingham, 1981.
  5737. EAA van Hartingsveldt
    Interfacial adhesion and mechanical properties of polyamide-6/glass bead composites
    PhD, TU Delft, 1987. DAIC 49(4)2850.
  5738. CG van Hengel
    Simple method to calculate the static properties of unnotched ARALL
    Thesis, Delft UT, March 1982. In Dutch.
  5739. FW van Name
    Design of a composite helicopter rotor blade
    Masters, Delaware, 1985.
  5740. M van Overmeire
    Contribution to the finite element analysis of vibrations
    PhD, VUB-Brussels, 1983.
  5741. HG van Schooneveld
    Transverse thermal expansion of unidirectional graphite reinforced composites and related fibre properties.
    Masters, RPI, 1979.
  5742. AS Vanvat
    Crazing in composites due to transverse normal loads.
    Masters, Toronto, 1973.
  5743. Barry Paul van West
    A simulation of the draping and a model of the consolidation of commingled fabrics
    PhD, Delaware, May 1990. DA9101048. DAIB51(8)3952. CCM report 90-07.
    >>> J van Zegbroek, see K Verbrugge.
  5744. TK Varadan
    Nonlinear problems of tapered beams and stiffened plates and shells
    PhD, IIT Madras, 1975.
  5745. VK Varatharajulu
    Strain pulse propagation in composite elastic rods
    Masters, Pennsylvania SU, 1969.
  5746. Vagarshak Vardanyan
    Two-dimensional damage models of fibre-reinforced composites
    PhD, UCLA, 1989. DA9005209. DAIB 50(9)4106.
  5747. UM Varde
    Modified norbonyl end caps for PMR-15 polyimide.
    PhD, CWRU, 1986. DA8611470.
  5748. CR Varela
    Investigation of fibre fine structure in large scale models
    Masters, MIT, 1974.
  5749. Jiri Lubomir Vasat
    Experimental verification of the devolatilization model for AFR700 polyimide composites
    PhD, Washington University, 1993.  AAD9419043  DAIB55(2)554
  5750. D Vasiljevic
    A preliminary design of a floating tip aileron by means of a composite structure
    Masters, Texas @ Austin, 1987.
  5751. IM Vasinyuk
    Interrelation between the extent of damage sustained by cyclically deformable materials and inelasticity characteristics.
    Dissertation, Tech.Sci-Kiev, 1972.
  5752. Theodoros Vaskopulos
    Forced fiber cooling
    PhD, Rutgers University: State University of New Jersey at New Brunswick, 1994.  AAD9431145  DAIB55(7)2979
  5753. CS Vatikiotis
    A combustion and heat transfer model for porous media
    PhD, NPS Monterey, June 1982.
  5754. WL Vaughn
    Processing and characterisation of silicon carbide whisker/alumina matrix composites
    PhD, UIUC, 1988. DA8815434.
  5755. P Vautey
    Failure mechanisms of composite materials including a ductile matrix: comparison between thermosets and thermoplastic resins for composite aircraft structural application
    PhD, UT Compiegne, (date unknown, 1989!).
  5756. A Vautrin
    DIng, Nancy-I, 1976.
  5757. A Vautrin
    Contribution a la caracterisation mecanique des composite a renfort filamentaire
    [Mechanical characterisation of filament reinforced composites]
    These de Doctorat es Sciences, Nancy, 1983.
  5758. Reza Vaziri
    On constitutive modelling of fibre-reinforced composite materials
    PhD, UBC Vancouver, 1989. DA-567711. DAIB 50(12)5783.
  5759. David Robert Veazie
    Modelling of fiber-reinforced composites incorporating distinct interface properties
    PhD, Georgia Institute of Technology, 1993.  AAD9415674  DAIB54(12)6425
  5760. J Vedder
    Vibration characteristics of composite structural systems
    Masters, Rose-Hulman IT, 1989.
  5761. M Vedula
    Residual thermal stress prediction and measurement in a metal matrix composite: graphite/aluminium.
    PhD, Pennsylvania SU, 1986. DA8705428.
  5762. PHM Velazquez
    Effect of fibrous reinforcing on the tensile strength of brittle materials
    Masters, New Mexico, 1968.
  5763. JDB Veldkamp
    Short-fibre-reinforced materials
    Thesis, TU-Twente, May 1975.
  5764. CN Velisaris
    Thermal processing and characterisation of polyether ether ketone (PEEK) matrices and carbon reinforced composites.
    MS, University of Washington-WA, 1985.
    >>> DC Velupillai, see HR Al-Agha.
  5765. Richard Arthur Venditti
    Effects of chemical conversion and physical aging on the properties of thermosetting materials
    PhD, Princeton University, 1994.  AAD9429165  DAIB55(6)2231
  5766. VP Venkatachari
    The theory of stress distribution in materials having a cylindrical distribution of aeolotropic elasticity with special reference to the elastic properties of wood and built-up materials
    PhD, London: ICST&M, 1949.
  5767. Shashi Venkatakrishnaiah
    Analysis of matrix damage in single fiber composites
    PhD, University of Missouri - Rolla, 1994.  AAD9507451  DAIB55(10)4575
  5768. A Venkatesh
    Finite element analysis of laminated anisotropic shells with laminated anisotropic stiffeners
    PhD, IIS-Bangalore, 1983.
  5769. Ramanan Venkatesh
    Interface engineering in alumina fiber/glass composites
    PhD, New Mexico Institute of Mining and Technology, 1992.  AAD9313001  DAIB54(1)439
  5770. Narendra Venugopal
    Delamination growth in graphite/epoxy composite laminates under tensile loading
    PhD, Massachusetts Institute of Technology, 1994.  AAD0574825  DAB55(5)1923
  5771. CJ Verberne
    Influence of the access door and the reinforcements around the access hole on the stress distribution in the ARALL test panel
    Thesis, Delft UT, 1985.
  5772. Constantinus Leonardus Jozef Andre Verbraak
    A study on orientation-induced crystallisation in two-phase polymer melt systems (self-reinforcement)
    Doctorate, TU Delft NL, 1988. DA-C070933. DAIC 50(2)342.
  5773. K Verbrugge and J van Zegbroek
    Optimisation of 3-D fabric composites
    Ind Eng Gp T, Leuven, 1989. In Dutch.
  5774. MLCE Verbruggen
    Thesis, Delft UT, January 1982/February 1983.
  5775. Marcel LCE Verbruggen
    Aramid reinforced aluminium laminate
    PhD, Delft UT, 1986. DA-C59573. DAIC 50(1)125.
    Part A: adhesion and delamination LR 504. ETN-87-99576. N87-21056.
    Part B: environmental effects on delamination LR 505. ETN-87-99577. N87-21057.
  5776. Didier Verchere
    Reseaux epoxy modifies par des elastomeres: separation de phase, morphologie et proprietes mechaniques
    [Rubber modified epoxy: phase separation, morphology and property]
    Doctorate, INSA Lyon, 1989. DA-C117366. DAIC 51(2)288.
  5777. G Verchery
    <a new variational approach for principal displacements>
    These de Docteur es Sciences, Paris, 1975.
  5778. YP Verma
    A study of the thermal characteristics of composite materials
    Masters, Rhode Island, 1982.
  5779. Prakash Reddy Vesireddy
    Fiber reinforced silicon nitride composites
    MSEng, University of Lowell, 1992.  AAD1350536  MA31(2)850
  5780. G Veryioglu
    Design, fabrication and testing of a fibre reinforced component
    Masters, RPI, 1977.
  5781. RP Vidano
    The layer structure characterisation of carbon materials by laser Raman spectroscopy
    PhD, Washington University-MO, 1980. N81-26182.
  5782. Henry E Vietinghoff
    Compression—after-impact strength of carbon fibre reinforced plastic laminates
    MAEng, Carleton University, 1994.  AADAAIMM92989 MA33(3)935
  5783. D Vigneron
    Mecanique du renforcement et mecanismes de rupture dans les polyamides renforces par fibres courtes
    [Mechanics of reinforcement and fracture mechanisms in polyamides reinforced with short fibres]
    DIng, UT Compiegne, 24 June 1983.
  5784. CT Vijayakumar
    Untersuchungen der thermischen Abbaues von Polyestern
    [Study of the thermal degradation of polyesters]
    Dr.mont, Montanuniversiteit Leoben - Austria, 1987. DAIC 50(1)434.
  5785. Mats Vikstrom
    Thermographic nondestructive testing of sandwich constructions
    Licentiate, KTH Stockholm, 1989. Dissertation 89-14.
    >>> TA de Vilbiss, see TA De Vilbiss
    >>> BDU de Villereglan, see B D'Uston.
  5786. J Villhard
    Instability of short circular cylindrical laminated composite shells under pure bending
    Masters, AFIT WPAFB, December 1980. AFIT/GAE/AA/80D-24. AD A094 737
  5787. M Vincent
    Etude de l'orientation des fibres de verre courtes lors de la mise en oeuvre de thermoplastiques charges
    [Study of orientation of short glass fibre filled thermoplastics]
    DrIng, ENSMP Evry Paris, 1984.
  5788. JR Vinson
    New techniques of solution for problems in the theory of orthotropic plates
    PhD, Pennsylvania, 1961. DA6103569.
  5789. F Viollaz
    Etude de blocage et du deblocage des fonctions isocyanate caracterisation des polyurethannes et composites correspondants
    [Study of blocking and unblocking of isocyanate functions, characterisation of polyurethanes and reinforced composites]
    DDI(Doctorate), INSA-Lyon, 1984.
  5790. P Virlouvet
    Fracture and fatigue behaviour of unidirectional glass fibre reinforced epoxy laminates
    MSc, Cranfield IT, 1987.
  5791. S Visconti
    Analyse morphologique de resines epoxy composites par diffusion de lumiere
    [Morphological analysis of epoxy composites by light diffusion]
    Masters, Montreal, 1974.
  5792. CN Viswanathan
    Tensile and compressive behaviour of borsic/aluminium composite laminates
    Masters, VPI&SU, 1975.
  5793. R Viswanathan
    Synthesis and characteristics of polyarylene ether sulphones
    PhD, VPI&SU, June 1981. DA8206785.
  5794. G di Vita
    <non-geodesic trajectories in filament winding>
    Thesis in Aeronautical Engineering, Universita di Roma, 1988.
  5795. AJ Vizzini
    Delamination failure and compressive fracture of graphite/epoxy
    PhD, MIT, 1986.
  5796. Joost Johan Vlassak
    New experimental techniques and analysis methods for the study of the mechanical properties of materials in small volumes
    PhD, Stanford University, 1994.  AAD9508462  DAIB55(10)4557
  5797. Arie Vlot
    Low-velocity impact loading on fibre reinforced aluminium laminates (ARALL) and other aircraft sheet materials
    PhD, TU Delft, 1991. DA-C239897. DAIC 53(3)554.
  5798. LE Voelker
    Dynamics of fibre reinforced composites.
    Masters, NWU, 1967.
  5799. LE Voelker
    Transient stress response of a laminated composite to a transverse loading
    PhD, NWU, 1969. DA7006544.
  5800. PM Voit
    Improving strength in composite laminates through use of hybrid composites
    Masters, Purdue, 1981.
  5801. PHT Vollenberg
    Mechanical behaviour of particle filled thermoplastics
    Doctorate, TH Eindhoven, 29 September 1987. PB88-169297. In Dutch.
  5802. GA Voloksov
    Study of mechanical properties of polyester glass-plastics used in railroad structures
    Dissertation, Eng.Sci.Moscow, 1965.
  5803. VI Volpe
    Buckling of orthogonally stiffened finite oval cylindrical shells under axial compression and lateral pressure
    PhD, PINY, 1978. DA7816650.
  5804. B von Bernstorff
    <stress-strain knee in SMC>
    PhD, Universitat Kassel, in preparation at April 1985.
  5805. TS Vong
    Study of tensile rupture strength of composite material laminates of T300/5208 graphite/epoxy with or without a central hole
    DIng, Compiegne UT, 16 January 1980 ENSTA Paris Rapport de Recherche 137, September 1980. N82-15138.
  5806. E von Gellhorn
    Die Fertigung von technischen Teilen im Faserwickelverfahren
    [Fabrication of engineering components by winding]
    Doctorate, RWTH Aachen, 1985. DS8601.
  5807. A von Harnier
    Uber die Herstellung und Eigenschaften einiger Verbundwerkstoffe besonderer Fasern und Matrices
    [On the current position and properties of some compound materials with special fibres and matrices]
    Dissertation, RWTH Aachen, 1973. DS7308.
  5808. PL Vorlicek
    Material damping of aluminum and graphite/epoxy in a simulated zero-gravity environment
    MS(Aero.Astro), MIT, 1981.
  5809. LD Voutsas
    The failure of glass reinforced plastic filament wound tubes due to axial compression
    MSc, UMIST, June 1977. D75822/87.
  5810. F Voutsinas
    Analysis of spherical lamella domes by triangular elements
    Masters, Arizona SU, 1988.
  5811. RP Vozzola
    Fracture toughness testing of a ceramic matrix composite
    Masters, AFIT WPAFB, 1987.
  5812. PG Vrionides
    Design studies of a composite bearingless tail rotor for a radio controlled helicopter
    Masters, RPI, 1983.
    >>> JB Vrublevskis, see PJ Bill.
  5813. BT Vu
    Mechanical properties of discontinuous glass and graphite fibre reinforced thermoplastics
    Masters, Wisconsin: Madison, 1973.
  5814. S Vudhivai
    Stress concentration in glass-epoxy composite plates.
    MS, NPS Monterey, December 1975. N76-29377. AD A021 869.
  5815. AM Waas
    Compression failure of fibrous laminated composites in the presence of stress gradients: experiments and analysis
    PhD, California IT, 1988. DA8812033.
  5816. MA Wack
    The biocompatible, chemical and mechanical evaluation of a quartz fibre reinforced polybutadiene composite hip femoral component
    Masters, Rose-Hulman IT, 1989.
  5817. AJ Waddon
    The crystallisation and morphology of poly(etheretherketone) [PEEK] poly(etherketone) [PEK] and poly(phenylene sulphide) [PPS]
    PhD, Bristol, October 1988. DX87796.
  5818. ME Waddoups
    The vibration response of laminated orthotropic plates.
    MS, Brigham Young Univ, August 1965.
  5819. K Wagener
    Zum Dauerschwingverhalten glasfaserverstarkter Kunststoff
    [Fatigue behaviour of glass fibre reinforced plastics]
    PhD, TH Hannover, 1966. N71-15949.
  5820. HD Wagner
    Time and temperature dependant fracture in glass-epoxy composites
    MSc, Hebrew Univ-Israel, 1977.
  5821. HD Wagner
    Elastic properties and fracture of hybrid composite materials
    PhD, Hebrew Univ-Israel, 1982.
  5822. RJ Waikar
    Non-destructive evaluation of strength of Gl/Ep (0`/90`)s composite through image correlation acquired strains
    Masters, South Carolina, 1988.
  5823. BR Waine
    On buckling and ultimate strength of fibre reinforced plates
    PhD, UC Cardiff, November 1977. D40921/82.
  5824. J Waite
    Some aspects of the microbiological properties of polymers and composite materials
    PhD, Aston, 1978.
  5825. Simon Roy Waite
    Optical fibre witness of fatigue damage in composite materials
    PhD, City, December 1988. DX84911. ASLIB 38(2)4113. DAIB 50(1)302.
  5826. LR Wajzer
    Proces katalitycznej grafityzacji substancji organicznych
    [Catalytic graphitisation of organic compounds]
    Dr.inz, Poli.Wroclawska, 1977.
  5827. TJ Waldron
    An investigation of structural columns of fiberglass pipe filled with concrete
    Masters, Virginia, 1984.
  5828. SJ Waling
    Experimental investigation of thin plastic sandwich shell structure
    Masters, Purdue, 1970.
  5829. WB Walker
    Experimental stress distribution around a rigid inclusion in an infinite matrix
    Masters, S.Florida, 1969.
  5830. AW Walker
    The effect of fibre surface coatings on the mechanical properties of carbon fibre reinforced plastics
    MSc, Lancaster, 1976.
  5831. AR Walker and DN Williams
    Experimental determination of mechanical properties of unidirectional carbon fibre reinforced plastics in compression
    BSc, Bristol, June 1976. BU-201. N77-13225.
  5832. CE Walker
    Optimal cooling duct arrangement within an anisotropic conduction heat transfer medium
    Masters, RPI, 1982.
  5833. MA Walker
    Creep behaviour of anisotropic biomaterials
    MS, Washington University-MO, 1983.
  5834. TH Walker
    A singular finite element analysis of interface fracture in composite materials
    Masters, University of Washington-WA, 1986.
  5835. JD Walker
    Waves and cracks in composites
    PhD, Utah, 1988. DA8817887. DAIB 49(7)2687.
    >>> JF Wallace, see GA Rozak.
  5836. Jess Mundy Waller
    Crystal structure of PI-2 polyimide and implications for related PI-2/carbon fiber composite interfaces
    PhD, University of Akron, 1994.  AADAA19517843  DAB56(1)270
  5837. RA Walley
    Natural frequencies and mode shapes of curved rectangular composite panels with interior cutouts
    Masters, AFIT, December 1985. AFIT/GAE/AA/85D-16. AD A165 269. N86-27691.
  5838. David Paul Walls
    Fatigue damage mechanisms in fiber-reinforced metal matrix composites
    PhD, University of California - Santa Barbara, 1992.  AAD9317208  DAIB54(2)1041
  5839. DE Walrath
    Development of a graphite/aluminium/epoxy hybrid composite
    Masters, Wyoming, 1975.
  5840. DE Walrath
    Viscoelastic properties and edge stress relaxation of laminated composite materials
    PhD, Delaware, 1986. DA8708716.
    >>> DC Walrath, see DS Cairns.
  5841. RM Walsh
    Strain energy release rate determination of stress intensity factors by finite element methods
    Masters, Delaware, 1983.
  5842. RM Walsh
    Three-dimensional stress analysis of anisotropic laminated composites using boundary-fitted coordinate system techniques
    PhD, Delaware, 1987. DA8808058.
  5843. Shawn Michael Walsh
    Novel processing methods for thick-sectioned composites
    DEng, University of Lowell, 1992.  AAD9234490  DAIB53(7)3615
  5844. Thomas James Walsh
    Analytical and experimental mechanics of structural reaction injection molded composites
    PhD, Texas A&M University, 1994.  AADAAI9520488  MAB56(2)1065
  5845. JV Walters
    Finite element analysis of glass reinforced plastic links
    PhD, Nottingham, 1975.
  5846. E Walter
    Osmotic and hydration pressures in carbon fibre reinforced plastics
    MSc, Bristol, 1984.
  5847. TC Walton
    Adhesion and characterisation of currently available prepreg processable polyimides
    Masters, Lowell, December 1986.
  5848. TL Waltz
    Interlaminar stresses in laminated cylindrical shells in composite materials
    Masters, Delaware, 1975.
  5849. A Wambach
    Fracture toughness of filled polymers
    DSc, Washington University-MO, 1970.
  5850. J Wand
    A process for manufacturing carbon fibres from polyacrylonitrile precursor
    MSc, Hebrew Univ-Israel, 1978.
  5851. K-C Wang
    Three-dimensional axisymmetric separation of an infinite elastic matrix from an embedded rigid circular cylindrical fibre.
    Masters, Clemson, 1969.
  5852. CH Wang
    Fundamental bending frequency and viscoelastic damping effects of cantilevered isosceles triangular plates
    PhD, Cincinnati, 1974. DA7427249.
  5853. S-S Wang
    Fracture of graphite fibre reinforced composites
    Sc.D, MIT, 1974.
  5854. AY Wang
    Free vibration of orthotropic rectangular plate with in-plane load
    Masters, Pittsburgh, 1977.
  5855. CS Wang
    Creep behaviour of glass-epoxy composite laminates under hygrothermal conditions
    Masters, Drexel, 1978.
  5856. HT Wang
    Delamination of fibreglass/epoxy composite under fatigue.
    MS, MIT, 1978.
  5857. CT Wang
    Numerical solution for transient heat conduction in composite materials by finite element method
    Masters, Toledo, 1980.
  5858. JH Wang
    Residual stress in high modulus carbon fibres
    MS, RPI, 1981.
  5859. T Wang
    Dynamic response and damage of a graphite/epoxy laminate to hard object impact
    PhD, Purdue, 1982. DA8225783.
  5860. Y-S Wang
    Interactions between flow, heat and mass transfer during formation of carbon-fibre reinforced epoxy composites
    PhD, Pittsburgh, 1985. DA8524842. N86-22642.
  5861. Y Wang
    Mechanics of fibre reinforced concrete
    SM(Mech), MIT, 1985.
  5862. W-B Wang
    Stress and strain analysis of fibre-reinforced sheets with bending stiffness
    PhD, Brown, 1986. DA8617642.
  5863. C Wang
    Finite-element and experimental studies of buckling of laminated thin-wall structures
    ScD, MIT, 1986.
  5864. J-A Wang
    A modified direct method for the calculation of the elastic properties of composite materials
    PhD, California: Berkeley, 1987. DA8814110.
  5865. JY Wang
    A numerical study of stress interference in a transversely isotropic body under axisymmetric loading
    Masters, Marquette, 1987.
  5866. HT Wang
    Processing/property relationships in autoclave cured graphite fibre/epoxy resin composites
    PhD, Polytechnic University, December 1987. DA8818578. DAIB 49.2758
  5867. B Wang
    <constitutive relationships for short fibre composites with non-propagating cracks>
    PhD, Harbin IT - China, 1988.
  5868. D Wang
    Ultrahigh temperature ceramic-ceramic composites
    Masters, CWRU, 1988.
  5869. HH Wang
    The effect of biaxiality on failure in composites
    Masters, SDSMT, 1988.
  5870. SF Wang
    Effects of physical ageing on viscoelastic properties of polymers and composites
    Masters, Clemson, 1988.
  5871. A Wang
    Abrasive wear of metal matrix composites
    PhD, Cambridge, 1988/89.
  5872. Chung-Yue Wang
    A study of impact damage in composite laminates
    PhD, Texas @ Austin, 1989. DA8920862. DAIB 50(6)2509.
  5873. Jingbai Wang
    Stress analysis of cracked cross-ply composite laminates: theory and application
    PhD, Pittsburgh, 1989. DA9021454. DAIB 51(3)1465.
  5874. Tao-Ming Wang
    Thermomechanical behaviour of multidirectional composite laminates
    PhD, NWU, 1990. DA9114656. DAIB 51(12)5965.
  5875. Weicheng David Wang
    Ultrasonic evaluation of elastic and interfacial properties of composite materials and laminates
    PhD, Ohio SU, 1990. DA9111812. DAIB 51(12)6070.
  5876. Cong Wang
    Predictive forming of advanced thermoplastic composite structures
    PhD, Purdue, 1991. DA9215686. DAIB 53(1)409.
  5877. EL Wang
    The effects of laps and gaps on the processing of advanced thermoplastic composites
    MS(ME), MIT, 1991.
  5878. Liya Wang
    Synthesis and characterisation of silicon carbide whiskers and their application in silicon nitride matrix composites
    PhD, Michigan, 1991. DA9135715. DAIB 52(7)3848.
  5879. Xuerong Wang
    Characterisation of interactions and interfacial properties of wood/polyurethane composites
    PhD, Michigan TU, 1991. DA9220729. DAIB 53(2)645.
  5880. Yiming Wang
    Micromechanics of creep deformation of two-phase composites and porous materials
    PhD, Rutgers SUNJ New Brunswick, 1991. DA9200283. DAIB 52(7)3870.
  5881. Yuan Ruo Wang
    Analysis and modelling of high-temperature performance of advanced fibre composites
    PhD, Delaware, 1991. DA9206305. DAIB 52(9)4823.
  5882. Xiaorong Wang
    Properties of thermoplastic composites made with recycled cellulosic fillers
    MScF, University of Toronto, 1991.  AADMM74349  MA31(3)1130
  5883. Chi Wang
    Fracture mechanics of model fibre composites
    PhD, Akron, 1992. DA9220656. DAIB 53(3)1397.
  5884. Shien-Fu Wang
    Electrical percolation behavior of particulate and fibrous composites
    PhD, Clemson University, 1992.  AAD9233369  DAIB53(6)3038
  5885. Xiaohua Wang
    Stress and reliability analyses of multilayered composite cylinder under thermal and mechanical loads
    PhD, Virginia Polytechnic Institute and State University, 1992.  AAD9306161  AIB53(10)5284
  5886. Yungchen Wang
    Interface fracture in composite materials
    PhD, Cornell University, 1992.  AAD9300852  DAIB53(8)4208
  5887. Zhen Nan Wang
    Interphasial shear strength and matrix shear strength in carbon epoxies
    MASc, University of Toronto, 1992.  AADMM74184  MA31(3)1373
  5888. Duck Hyun Wang
    Machining characteristics of graphite/epoxy composite
    PhD, University of Washington, 1993.  AAD9401484  DAIB54(8)4357
  5889. Hao Wang
    Low velocity impact damage in carbon fiber/PEEK composite laminates
    PhD, Ecole Polytechnique Montreal - Canada, 1993.  AADNN86546  DAIB55(4)1634
  5890. Jean-Shyan Wang
    Influence of fiber waviness on mechanical property and structural response of composites laminates
    MS, University of Texas at Arlington, 1993.  AAD1352988  MA31(4)1915
  5891. Jerry Zhiqi Wang
    Failure strength and mechanism of composite laminates under multiaxial loading conditions
    PhD, University of Illinois at Urbana-Champaign, 1993.  AAD9314957  DAIB54(1)456
  5892. Min Wang
    Three-dimensional, nonlinear viscoelastic analysis of laminated composites:  a finite element approach
    PhD, Oregon State University, 1993.  AAD9404188  DAIB54(9)4766
  5893. Yuqin Wang
    Ultrasonic tomography in fiber reinforced composite materials
    PhD, University of Oklahoma, 1993.  AAD9322515  DAIB54(4)2163
  5894. Huizhong Wang
    A new fabrication method of continuous fiber reinforced metal matrix composites
    MS, Michigan State University, 1994.  AAD1357964  MA33(1)243
  5895. Mingde Wang
    Damage and fracture in monotonic and cyclic loading of cross-woven carbon/silicon carbide composites
    PhD, University of Pennsylvania, 1994.  AADAAI9521139  DAB56(3)1658
  5896. Tiejun Wang
    Chemical modification of interface of carbon fiber reinforced carbon composites and carbon fiber reinforced polymers
    PhD, Kansas State University, 1995.  AADAAI9536325  DAB56(6)3170
  5897. WZA Wan Hanafi
    A study of magnesium hydroxide as a flame retardant and smoke suppressant filler for unsaturated polyesters
    MPhil, Brunel, 1988. ASLIB 38(2)4487.
  5898. SP Wanthal
    Formulation of three simple triangular plane stress anisotropic finite elements for a microcomputer
    Masters, Purdue, 1987.
  5899. Steven Paul Wanthal
    Three-dimensional finite element formulations for thick and thin laminated plates
    PhD, Purdue, 1989. DA9008710. DAIB 50(11)5187.
  5900. PT Ward
    Visual inspection, its automation and application in the textiles industry
    PhD, CNAA: Leicester, 1986. ASLIB 37(4)8651.
  5901. Stephen Warfield
    Effects of processing variables on flexural strength and fracture morphology of in-situ nitride whisker reinforced barium aluminosilicate ceramic matrix composites
    MS, University of Texas at Arlington, 1994  AAD1358882  MA33(2)627
  5902. GT Warhola
    Time-domain first born approximations to elastodynamic backscatter with applications to nondestructive evaluation of composites
    MS, AFIT, December 1981. AFIT/GE/MA/81D2. AD A115 566. N82-32429.
  5903. J Warmuth
    Systemanalyse zur verarbeitung von schlagzahem PVD
    [System analysis of processing for impact-resistant PVC]
    Dissertation, TH Aachen, 1978. DS7805.
  5904. SB Warner
    A structural study of carbon fibres utilising etching and bromine treatments
    Masters, MIT, 1973.
  5905. MJ Warner
    Finite element analysis of buried fibre-glass reinforced plastic pipe
    Masters, Utah SU, 1984.
  5906. Shawn Daniel Warner
    Overview and survey of advanced composites in the aicraft industry
    MA, CSULB, 1989. MA1337419. MA 28(1)29.
  5907. TJ Warner
    Mechanisms of load transfer in discontinuously reinforced metal matrix composites
    PhD, Cambridge, November 1989. D59990.
  5908. AJ Warrender
    The support of horizontal cylindrical glass reinforced plastic storage vessels
    PhD, Strathclyde, November 1986. D76844. ASLIB 38(4)8774.
  5909. MJ Warwick
    Attrition processing of Ti3Al-TiC particulate reinforced composites
    Masters, MIT, 1988.
  5910. Sunil Govinda Warrier
    Interfacial reactions during the liquid infiltration of titanium matrix composites
    PhD, University of Cincinnati, 1993.  AAD9416807  DAIB55(1)6688
  5911. SJ Washburn
    Thesis, Princeton, May 1980.
  5912. JP Waszczak
    A synthesis procedure for mechanically fastened joints in advanced composite materials
    PhD, Carnegie-Mellon, April 1973. DA7322886. SM-73-11.
  5913. RI Watkins
    Multilevel optimum design of large laminated composite structures
    PhD, Cranfield IT, August 1986. DX72271/87. ASLIB 38(2)4364.
  5914. MR Watkins
    The development of tough artificial composite based on antler bone
    PhD, Reading, 1987. DX81344. ASLIB 37(4)8306.
  5915. Thomas R Watkins
    The fracture behavior of silicon carbide-graphite composites
    PhD, Pennsylvania State University, 1992.  AAD9226802  DAIB53(5)2496
  5916. WG Watson
    A study of the elevated temperature coarsening behaviour of directionally solidified aluminium-aluminium nitride
    Masters, Lehigh, 1968.
  5917. WJ Watson
    An analysis of competition and distribution in the Tennessee structural composites market
    Masters, Tennessee @ Knoxville, 1987.
  5918. RK Watterson
    High compressive stress low cycle fatigue of composite material
    Masters, MIT, 1970.
  5919. Keith Peter Watts
    Deflections of a simply supported delaminated composite plate
    MS California State University, 1994.  AADAAI1360475  MA33(4)1276
  5920. Y-CW Waung
    A circular anisotropic tube under axisymmetric loading
    Masters, Cornell, 1974.
  5921. A Wawrykowicz
    Ocena wlasnosci zmeczeniowych Elitu 25- nowego tworzywa konstrukcyjnego produkcji IChP
    [Fatigue properties of Elit 25- a new engineering plastic]
    Dr.inz, Poli.Wroclawska, 1981.
  5922. JR Weatherby
    Evaluation of energy release rates in unidirectional double cantilevered beam fracture toughness specimens
    MS, TA&MU, December 1982.
  5923. JR Weatherby
    Finite element analysis of crack growth in inelastic media
    PhD, TA&MU, May 1986. DA8615007.
  5924. C Weaver
    Joints in carbon fibre reinforced plastic
    Thesis, Cranfield IT, September 1970.
  5925. TC Weaver
    Shear traction solutions for a single fibre composite model
    Masters, Cornell, 1971.
  5926. GG Weaver
    Minimum mass design of stiffened graphite/polyimide compression panels
    MMAE, Delaware, 1980.
  5927. G Webb
    Damage evolution, characterisation and durability of B/Al composite
    Masters, Georgia IT, 1988.
  5928. Geoffrey Matthew Webb
    The effects of sub-critical damage on the notched strength of carbon fibre composites
    MASc, University of Toronto, 1992.  AADMM78617  MA31(4)1860
  5929. SA Weber
    Ultrasonic non-destructive evaluation based upon complete waveform databases
    Masters, Delaware, 1987.
  5930. Joseph Anthony Weber
    Buckling analysis of anisotropic plates by using a method of weighted residuals and symbolic algebra software
    MS, Texas @ Arlington, 1988.  MA1336210.  MA 27(3)394.
  5931. RL Webster
    An optimisation technique applied to the determination of orthotropic material properties using dynamic response test data
    Masters, Brigham Young, 1969.
  5932. JD Webster
    Flaw criticality of circular disbond defects in compressive laminates
    MS, Delaware, June 1981. N81-32195.
  5933. JF Wechselberger
    Elastic-plastic analysis of unidirectional composite under longitudinal shear
    MS, NPS Monterey, June 1973. AD 767 671. N74-14248.
  5934. AR Wedgewood
    Quantitative structure-property relationships for branched and linear polyethylene
    PhD, University of Washington-WA, 1982.
  5935. Nadim Iskandar Wehbe
    Basic behavior of composite sections made of concrete slabs and graphite/epoxy beams
    MS, University of Nevada - Reno, 1992.  AAD1350293  MA31(2)858
  5936. Jianghua Wei
    Microwave processing of epoxy resins and graphite fiber/epoxy composites in a cylindrical tunable resonant cavity
    PhD, Michigan State University, 1992.  AAD9314771  DAIB54(1)440
  5937. W Weichers
    The fracture properties of thermosetting resins
    MSc, Loughborough, 1969.
  5938. Brian L Weick
    Effects of fiber type on the tribological behavior of polyamide composites
    PhD, Virginia Polytechnic Institute and State University, 1993.  AAD9407160   DAIB54(10)5347
  5939. F Weinstein
    Studies in interlaminar fracture of composite laminates
    PhD, Georgia IT, 1986. DA8622464.
  5940. R Weiss
    Die Natur der Haftung an der Faser/Matrix Grenzflache von kohlenstoffaserverstaerkten Polymerverbundkorpern und deren Modifizierbarkeit zur Erzielung massgeschneiderter Verbundkorper-eigenschaften
    [The nature of fibre matrix interfacial adhesion of CFRP and change due to measured reduction of composite quality]
    Dipl.Chem, Karlsruhe, February 1984.
    >>> JP Weiss, see DM Powell.
  5941. S Weissenberg
    The effect of heat treatments on fatigue induced stiffness reduction in boron aluminium
    Masters, RPI, 1986.
  5942. Deborah Weissman-Berman
    Analytical investigation of an elastic limit for cored sandwich beams
    Dissertation, Eurotechnical Research University-Hilo HI, 1989.
  5943. DA Weitzenhof
    Photoelastic techniques for filamentary composite materials
    PhD, CWRU, 1971. DA7200125.
  5944. DE Welch
    The deformation and fracture of unidirectional boron-aluminium
    Masters, Tennessee @ Knoxville & Tullahoma, 1977.
  5945. KR Welch
    Analysis of axisymmetric layered systems including edge effects
    Masters, California: Davis, 1981.
  5946. TG Weld
    The business plan for Fibrespar: graphite composite masts and booms for the boardsailing market
    Masters, MIT, 1988.
  5947. JR Wells
    Matrix stress variation due to fibre debonding in fibrous composite materials
    PhD, Purdue, 1981. DA8210272.
  5948. JK Wells
    Micromechanisms of fracture of fibrous composites
    PhD, Cambridge, September 1982. D49422/84.
  5949. GM Wells
    Transverse mechanical behaviour of glass fibre reinforced plastics
    PhD, Bath, 1987. DX82225. ASLIB 37(4)8307.
  5950. LM Welsh
    Deformation of composite materials at high rates of tensile loading
    DPhil, Oxford, 1983. D58134/85.
  5951. PU Rung Wen
    The dynamic mechanical properties of composite material
    PhD, Pennsylvania SU, 1968. DA6909819.
  5952. Yuan-Feng Wen
    Characterization of long-term creep behavior of polymer composites by the use of dynamic test methods and micromechanical models
    PhD, Wayne State University, 1994.  AADAAI9519977 DAB56(2)1065.
    >>> K Wen-Tsao, see WT Kao.
  5953. LM Wenz
    Mechanical and biological testing of CFRP composites
    Masters, CWRU, 1988.
  5954. Andrew Alan Wereszczak
    Toughening mechanisms in whisker/short fiber reinforced ceramic matrix composites at elevated temperatures
    PhD, University of Delaware, 1992.  AAD9301771  DAIB53(9)4895
  5955. Chien Wei Wern
    Fiber and fiber-matrix interface effects on the orthogonal cutting of fiber reinforced plastics
    PhD, University of Washington, 1995.  AADAAI9537370  DAB56(7)3988
  5956. SM Werner
    High strain rate response of fibre-reinforced composite materials
    PhD, California: Berkeley, 1987. DA8814114.
  5957. CR Werrett
    Inelastic electron tunnelling spectroscopy (IETS) of silane coupling agents
    PhD, CNAA: Leicester, 1987.
  5958. HA West
    Application of fibre-reinforced composites to flywheel design
    Masters, NCSU, 1982.
  5959. RW West
    Strengths of bolted joints in carbon fibre reinforced composites
    MSc, Salford, 1985.
  5960. Harvey Alexander West
    The effect of fibre orientation on the wear behaviour of composite materials
    PhD, NCSU Raleigh, 1989. DA8918150. DAIB 50(5)2109.
    >>> BP van West, see BP Van-West
  5961. RC Wetherhold
    Analytical model for bonded joint analysis in composite structures including hygrothermal effects
    Masters, Delaware, 1976.
  5962. RC Wetherhold
    Statistics of fracture of composite materials under multiaxial loading
    PhD, Delaware, 1983. DA8412692. N84-32433.
  5963. M Wevers
    Identification of fatigue failure modes in carbon fibre reinforced composites
    PhD, KUL Belgium, 7 May 1987.
  5964. M Weyer
    Motorradschwinge aus Faserverbundwerkstoff (CFK)
    [Motorcycle rocker arm in CFRP composite]
    Diplomarbeit, IKV Aachen, 1985. D8506.
    >>> E Weyers, see J Teuwen.
  5965. GW Wheatley
    Polyaryletherketone [/PDMS] block copolymers
    PhD, CNAA: Humberside CHE, 1988. ASLIB 39(2)3428.
  5966. PW Wheeler
    Wave propogation in composite materials
    PhD, NWU, 1971. DA7130983.
  5967. B Whipple
    Velocity distributions in die swell
    DSc, Washington University-MO, 1974. In 2 volumes.
  5968. DA White
    Effect of interface compound on the strength of aluminium matrix boron fibre composites
    Masters, MIT, 1969.
  5969. DJ White
    Elastic moduli of multidirectionnally fibre-reinforced composites
    MS, AFIT @ WPAFB, 1971. AFIT/GNE/PH/71-6.
  5970. MK White
    The effect of environment on thermal cycling damage in boron/aluminium composites
    Masters, Tennessee @ Knoxville & Tullahoma, 1976.
  5971. JF White
    Aeroelastic behaviour of low aspect ratio metal and composite turbomachinery blades
    Masters, Princeton, 1985.
  5972. RJ White
    Environmental creep mechanisms in glass/polyester composites
    PhD, Bath, May 1985. D56848/85. ASLIB 36(2)4103.
  5973. KW White
    Fracture mechanisms in monolithic structural ceramics and ceramic composites
    PhD, University of Washington-WA, 1987. DA8810609. DAIB 49(7)2807.
  5974. SR White
    Mixed-mode interlaminar fracture of graphite/epoxy composites
    MS, Washington University-MO, 1987.
  5975. RD Whitehead
    Assessment of fracture toughness for polyethersulphone injection mouldings
    PhD, Surrey, 1988. DX84111. ASLIB 39(1)0904.
  5976. Stephen Robert Whitehouse
    Dynamic analysis of composite beams using shear-deformable finite elements
    PhD, UIUC, 1990. DA9114462. DAIB 51(12)5965.
  5977. JM Whitney
    A study of the effects of coupling between bending and stretching on the mechanical behaviour of layered anisotropic composite materials
    PhD, Ohio SU, 1968. DA6905000.
  5978. TJ Whitney
    Analytical characterisation of 3-D textile structural composites using plane stress and 3-D lamination analogies
    Masters, Delaware, December 1988.
  5979. Sean Charles Whitney
    Ultrasonic characterization of thick fiber reinforced composite materials
    MS, Mississippi State University, 1994.  AAD1359148  MA33(2)627
  5980. AJ Whittaker
    Thermal transport properties and microstructure of a series of carbon/carbon fibre composites
    PhD, UMIST, January 1986. D74025/87.
  5981. HA Whitworth
    Static and dynamic stiffness reduction of graphite/epoxy composite laminates under fatigue loading
    DSc, GWU, 1983. DA8324493. N84-15194.
  5982. K Whybrew
    The effects of flow on the strength of polyester dough moulding compounds
    PhD, Nottingham, 1972.
  5983. DW Whyte
    On the structure and properties of 3-D braid reinforced composites
    PhD, Drexel, 1986. DA8616269.
  5984. BG Wibisono
    Power-logarithmic corner singularities in elastic composites
    Masters, Clarkson CT, 1984.
  5985. SM Wickliffe
    Processing and properties of poly(p-phenylene benzobisthiazole)/nylon fibres
    Masters, Massachussetts, 1985.
  5986. David Paul Widauf
    The evaluation of the effects of a plastic bead blasting paint removal process on graphite-epoxy composites
    EdD, East Texas SU, 1989. DA9014142. DAIB 51(1)381.
  5987. TE Wiecek
    A study of the high temperature thermal response of decomposing and expanding polymer composites
    MS, Rhode Island, 1986.
  5988. Z Wieckowski
    Duality in finite element method and its application for some linear and non-linear problems of mechanics of composite materials
    Doctorate, TU Lodz-Poland, 1986. In Polish.
  5989. SJ Wiedenschilling
    Electron microscopy of a fibre composite.
    Masters, MIT, 1969.
  5990. Todd Michael Wieland
    Scale effects in buckling, postbuckling and crippling of graphite-epoxy Z-section stiffeners
    PhD, VPI&SU, 1991. DA9214616. DAIB 53(1)384.
  5991. Jeffrey Stuart Wiggins
    Design of bioabsorbable, amorphous polymer networks and composites
    PhD, University of Southern Mississippi, 1992.  AAD9321745  DAIB54(3)1436
  5992. Jony Wijaya
    Mechanisms of epoxy/amine reactions in microwave and thermal fields
    PhD, Polytechnic University, 1993.  AAD9312239  DAIB53(12)6430.
    >>> L de Wilde, see L De Wilde.
  5993. BL Wilder
    A study of damage tolerance in curved composite panels
    Masters, AFIT @ WPAFB, 1988.
  5994. DS Wiley
    Single and multiple fibre models for fracture of fibrous composites
    PhD, UCLA, 1983. DA8410088. N84-31286.
  5995. DJ Wilkins
    Analysis of material damping in sandwich beams
    Masters, Oklahoma, 1965.
  5996. TL Wilkinson
    Stresses in the neighbourhood of loaded holes in wood and applications to bolted joints
    PhD, Wisconsin: Madison, 1978.
  5997. Steven Paul Wilkinson
    Toughened bismaleimides, their carbon fibre composites and interphase evaluation studies
    PhD, VPI&SU, 1991. DA9209620. DAIB 52(12)6429.
  5998. HO Willax
    Der einfluss der werkstoffkomponenten und deren trankungs und benetzungseigenschaften auf das mechanische verhalten von glasfaserverstarkten kunststoffen
    [Flow of raw materials and effect of soaked and moistened vertical shaft on mechanical condition of glassfibre reinforced plastics]
    Dissertation, Karlsruhe, 1973.
  5999. MG Willcox
    Determination of the creep compliance of a fibre reinforced viscoelastic material
    Masters, Texas @ Austin, 1969.
  6000. RT Willey
    The instability of glass fibre reinforced plastic panels under axial compression
    Masters, Stanford, 1967.
  6001. RS Williams
    Fatigue damage mechanisms in fibre reinforced composite materials including the effect of cyclic loading frequency
    PhD, VPI&SU, January 1975. DA7515887. N75-27077. VPI&SU-75-15.
  6002. RB Williams
    Elongation-residual stress studies of cvd boron filament
    Masters, RPI, 1980.
  6003. DR Williams
    Mode I transverse cracking in epoxy and a graphite/epoxy composite
    MS, TA&MU, December 1981. MM-3724-81-16.
  6004. S Williams
    Toughening mechanisms in a particle-filled brittle matrix
    PhD, Cambridge, October 1982. D52844/84.
  6005. DR Williams
    Fatigue crack initiation and microcrack growth in silicon carbide whisker reinforced 2124 aluminium alloy.
    PhD, NWU, 1985. DA8600936.
  6006. J Williams
    An assessment of low velocity impact damage of composite structures
    PhD, CNAA: Paisley CT, July 1987. D75760/87. ASLIB 37(4)8303.
  6007. TJ Williams
    Thermal, mechanical and interfacial characterisation of a fibreglass reinforced plastic composite
    Masters, Missouri: Rolla, 1988.
    >>> DN Williams, see AR Walker.
  6008. RT Willmington
    Vertical shear in composite beams
    PhD, Cambridge, 1969-70.
    >>> L Willners, see J Bergland.
  6009. JL Wills
    The effects of thermal cycling on boron/aluminium composites
    Masters, Tennessee @ Knoxville & Tullahoma, 1972.
  6010. TA Willway
    Stiff, light, highly-damped CFRPs and the effect of complex loads on damping
    PhD, Southampton, April 1986. D71287/87. DAIC 48/3347C. ASLIB 37(2)3949.
  6011. PS Wilson
    Effect of processing conditions upon the mechanical properties of selected reinforced and modified polypropylenes.
    Masters, Ohio, 1970.
  6012. DW Wilson
    Viscoelastic buckling behaviour of laminated plates.
    MMAE, Delaware, August 1982.
  6013. S Wilson
    Investigation of the swollen state 13C NMR technique for the analysis of crosslinked polyester systems
    MSc, Lancaster, 1984.
  6014. NJ Wilson
    Calculation of effective conductivities of regular composite media
    PhD, UEA Norwich, September 1985. D66009/86. ASLIB 36(2)3104.
  6015. TW Wilson
    Radiation effects on the dynamic mechanical properties of epoxy resins and graphite fibre/epoxy composites
    PhD, NCSU Raleigh, 1986. DA8613100.
  6016. E Wilson
    Design and construction of a laser machine tool for processing advanced materials
    Masters, MIT, 1987.
  6017. CD Wilson
    An investigation of fracture and fatigue properties of ARALL-2
    Masters, Tennessee TU, 1988.
  6018. TE Wilt
    Computational simulation of composites structures with and without damage
    Masters, Akron, May 1988.
  6019. Thomas Edmund Wilt
    Linear and nonlinear finite element analysis of laminated composite structures at high temperature
    PhD, Akron, 1992. DA9217248. DAIB 53(1)384.
  6020. DL Wimberley
    Random vibration of orthotropic shells
    Masters, Delaware, 1970.
  6021. Surachai Wimolkiatisak
    Effects of electro-copolymerised interlayers and fibre arrangement on the properties of graphite/epoxy composites
    PhD, Connecticut, 1990. DA9032096. DAIB 51(6)2919.
  6022. SJ Winckler
    Aeroelastic analysis of a composite wing
    Masters, RPI, 1981.
  6023. SJ Winckler
    A theory for warp-free unsymmetric composite plates and beams with extension-bending couplings
    PhD, RPI, 1986. DA8700157.
  6024. SA Wineman
    Viscous flow through aligned graphite fibres in compression
    SB in ME, MIT, June 1985.
  6025. Douglas Clay Winfield
    Static and dynamic analyses of thick fibrous composite conical tubes with variable thickness
    PhD, University of Memphis, 1995.  AADAAI9535159  DAB56(6)3410
  6026. WM Winkler
    The effects of moulding parameters and fibre orientation on the mechanical properties of fibre reinforced epoxy
    Masters, Lehigh, 1972.
  6027. 5W Winkler
    Digitale Schliessgeschwindigkeit- und Druckregelung fur eine SMC-Presse
    [Digital control of closing speed and pressure for a SMC press]
    Diplomarbeit, IKV-Archiv-Nr-8428, 1984.
  6028. AJ Winsauer
    Amine-functional polyamides for use as crosslinking agents for epoxy resins
    Masters, N Dakota SU, 1987.
  6029. E Winter
    Viscoelastic characterisation of a high performance epoxy resin
    Masters, Pittsburgh, 1980.
  6030. RS Winters
    The structural design and analysis of a composite glider wing
    Masters, RPI, 1977.
  6031. Guy Kriengkrai Wisanrakkit
    Chemical cure and physical ageing of high Tg epoxy resins
    PhD, Princeton, 1990. DA9024530. DAIB 51(4)2041.
  6032. PJ Withers
    The development of the Eshelby model and its application to metal matrix composites
    PhD, Cambridge, 1988. D60036.
  6033. WP Witt
    A numerical analysis of fracture in a laminated fibrous composite plate
    MS, AFIT WPAFB, December 1977. AFIT/GA/AA/77D-9. AD A048 907. N78-19213.
  6034. WP Witt
    Formulation of a nonlinear, compatible finite element for the analysis of laminated composites
    PhD, AFIT @ WPAFB, December 1982. DA8314068. AFIT/DS/AA/83-1. AD A135 997.
  6035. G Woehrmann
    Einfluss der faserausrustung auf die verarbeitbarkeit von glasfasern und auf die eigenschaften von GFK
    [Flow of fibre compounds in the manufacture of glassfibre and of vertical shafts in GFRP]
    DIng, RWTH Aachen, 1976. DS7807.
  6036. Michael Pinney Wolcott
    Modelling viscoelastic cellular materials for the pressing of wood composites
    PhD, VPI&SU, 1989. DA9008045. DAIB 50(10)4715.
  6037. DS Wolf
    Some problems of interfacial cracks
    PhD, Purdue, 1976. DA7707548. N77-29225.
  6038. KW Wolf
    Effect of ionising radiations on the mechanical and structural properties of graphite fibre reinforced composites
    PhD, NCSU Raleigh, 1982. DA8308589. NASA-CR-169651. N83-16396.
  6039. R Wolfseher
    Die superposition von zeit, temperatur und spannung dargestellt am kriechverhalten eines glasfaserverstaerkten kunststoffs
    [Using the time-temperature-stress superposition principle to study the creep behaviour of a GFRP]
    Dr.sc.techn, ETH Zurich, 1987. In German. DAIC 48/3348C.
  6040. JM Wolla
    Experimental determination of the fracture behaviour of damaged graphite/epoxy laminates and comparison to the shear lag model
    MS, Clemson, 1984.
  6041. LC Wolstenholme
    Probability models for the failure of fibres and fibrous composite materials
    PhD, Surrey, November 1989. DX88358. ASLIB39(3)7361. DAIB50(12)5834
  6042. Yong-Gu Won
    Influence de la structure de reseaux epoxydes modeles sur les proprietes volumetriques, mecaniques et viscoelastiques
    [Influence of the structure of epoxy network models on the volumetric, mechanical and viscoelastic properties (Tg)]
    Doctorate, INSA Lyon, 1989. DAC080730. DAIC 50(3)532.
  6043. DMF Wong
    Tensile behaviour of aluminium reinforced with angle-ply boron/epoxy laminates
    Masters, VPI&SU, 1974.
  6044. Kin-Wing Wong
    Cylindrical wave propagation in anisotropic nonhomogenous material
    Masters, Tennessee TU, 1977. TTU.
  6045. DK Wong
    Finite element analysis of a composite box beam
    Masters, VPI&SU, 1980.
  6046. CM Wong
    Stresses around bolt holes in fibre reinforced plastics
    MSc, London: ICST&M, September 1980.
  6047. TL Wong
    An analysis of delamination in drilling composite material.
    Masters, Wisconsin: Madison, 1981.
  6048. JJ Wong
    Stress analysis and design of multi-ring fibre composite rotors
    Masters, Ottawa, 1982.
  6049. TC Wong
    Moisture diffusion mechanisms in epoxy resins
    Masters, Illinois IT, 1982.
  6050. FC Wong
    A Monte Carlo study of the properties of aligned discontinuous fibre reinforced composites
    Masters, Saskatchewan, 1987.
  6051. Aloysius Wong
    Optimization of composite material failure loads
    MASc,  University of Toronto - Canada, 1993.  AADMM87214  MA32(6)1693
  6052. JL Woo
    Dynamic mechanical properties of cotton and other fibres.
    PhD, New South Wales-Australia, 1975.
  6053. M Woo
    Effect of the interface on the moisture absorption behaviour of glass and carbon fibre reinforced epoxy
    MASc, Toronto, 1984.
  6054. Jongsik Woo
    Flutter of laminated rectangular plates including finite deflection and shear deformation
    PhD, IIT, 1990. DA9117598. DAIB 52(1)368.
  6055. Kyeongsik Woo
    Stress and failure analysis of textile composites using a global/local finite element method
    PhD, Texas A&M University, 1993.  AAD9403608   DAIB54(8)4265
  6056. JL Wood
    An experimental study of the buckling characteristics of a fibre in a matrix by the photoelastic technique
    Masters, Vanderbilt, 1970.
  6057. RC Wood
    A finite element analysis of a composite rectangular plate with a circular hole in the centre
    Masters, GWU, 1971.
  6058. RV Wood
    Elastic stability of orthotropic cylindrical shells.
    Masters, PINY Brooklyn, 1971.
  6059. MP Wood
    Strength improvement in highly dispersed carbon/glass fibre hybrid composites
    BSc, Surrey, June 1979.
  6060. LD Wood
    Thermal behaviour of graphite/epoxy composites in a sub-cured state
    Masters, Dayton, December 1980.
  6061. JD Wood
    Measurement of thermal expansion of damaged composite laminates from 85 to 394K with Moiré interferometry
    Masters, VPI&SU, 1983.
  6062. WM Wood
    A finite element analysis of axisymmetric shell structures
    Masters, Worchester PI, 1987.
  6063. Jeffrey Todd Wood
    Effects of strontium modification on A356: delta-alumina fibre metal matrix composites
    MASc, University of Waterloo - Canada, 1991.  AADMM69025.  MA31(1)428
  6064. Judy Darlene Wood
    Determination of thermal strains in the neighbourhood of a bimaterial interface
    PhD, VPI&SU, 1992. DA9218520. DAIB 53(1)505.
  6065. TD Woodall
    Linear and autoparametric modal analysis of aeroelastic structural systems
    MS, Texas TU, May 1984.
  6066. Roland Woodcock
    Modelisation de la transparence acoustique de structures simples et multi-couches aniotropes de type composite avec conditions limites quelconques
    PhD, Universite De Sherbrooke, 1994.  AADAAINN93153  DAB56(1)483
  6067. Marshall Benjamin Woodson
    Optimal design of composite fuselage frames for crashworthiness
    PhD, Virginia Polytechnic Institute and State University, 1994.  AADAAI9520781 DAB56(3)1558.
  6068. RS Woodward
    The effect of flourine modified silane coupling agents on composite performance
    MS, Washington University-MO, 1977.
  6069. SC Wooh
    Experimental studies of impact damage in graphite/epoxy composite laminates
    Masters, IIT Chicago, 1984.
  6070. Shi-Chang Wooh
    Development of ultrasonic nondestructive (imaging) methods for defect and damage characterisation in composite materials
    PhD, NWU, 1989. DA9001889. DAIB 50(8)3661.
  6071. DH Woolstencraft
    The compressive behaviour of unidirectional carbon fibre reinforced plastic
    PhD, CNAA: Preston, June 1981. D39241/82.
  6072. P Woolverton
    Computer control of materials testing machines
    DSc, Washington University-MO, 1976.
  6073. R Worndle
    Zur ermittlung der schubspannungsverteilung undder schubsteifigkeit in querkraftbeanspruchten, homogen oder inhomogenen querschnitten beliebiger form aus isotropen oder anisotropen werkstoffen
    [Determination of the compression strain distribution and stiffness in shear loading homogeneous or inhomogeneous transverse sections of arbitrary shapes in isotropic or anisotropic materials]
    Dissertation, Wien, 1981.
  6074. CM Worrall
    The behaviour of composite sandwich beams and panels under low velocity impact conditions
    PhD, University of Liverpool, 1990
  6075. David Lorne Woytowich
    Deterioration of a filled glass fibre reinforced polyester composite in aqueous environments
    PhD, Manitoba, 1991. DA-C570843. AADNN76942.  DAIB 52(8)4415. DAIB54(3)1558.
  6076. S Wray
    Mechanical behaviour of polymeric composites under vibrating loads
    MSc, UMIST, 1987.
  6077. Graeme Geoffrey Wren
    A new technique for measuring axial damping and its application to metal-matrix composites
    PhD, TA&MU, 1990. DA9027292. DAIB 51(5)2477.
  6078. PK Wright
    The behaviour of fibre composite sheet in biaxial tension
    Masters, CWRU, 1970.
  6079. PK Wright
    Plastic flow in unidirectional fibre composites under multiaxial loading
    PhD, CWRU, 1972. DA7306352.
  6080. GC Wright
    Dynamic behaviour of fibre reinforced plastic beams and plates
    PhD, ISVR Southampton, May 1973.
  6081. CL Wright
    Wave propagation in abruptly changing media
    Masters, Texas @ El Paso, 1974.
  6082. GF Wright
    Experimental study of effects of moist environments on epoxy resin chocks
    Masters, NPS Monterey, September 1984. AD A152 052.
  6083. JC Wright
    A probabilistic fatigue failure analysis of laminated composite materials
    PhD, Nebraska-Lincoln, 1986. DA8704565.
  6084. PA Wrzecioniarz
    Statecznosc plyty przekladkowej z rzdeniem o zmiennej characterystyce
    [Stability of a sandwich plate with core of variable character]
    Dr.inz, Poli.Wroclawska, 1976.
  6085. N-C Wu
    A large deflection theory of orthotropic sandwich shallow shells
    PhD, Florida, 1965. DA6509627.
  6086. C Wu
    On the lateral vibration of rectangular plates of pyrolytic graphite type material
    Masters, Delaware, 1968.
  6087. C-S Wu
    An experimental investigation of composite beam models.
    Masters, Mississippi SU, 1969.
  6088. Tiao-Ming Wu
    Propogation of elastic waves in periodic fibre composite materials
    PhD, Princeton, 1971. DA7214170.
  6089. CH Wu
    Buckling of anisotropic circular cylindrical shells
    PhD, CWRU, June 1971.
  6090. S-J Wu
    Analysis of laminated composite plates under transverse load
    Masters, N.Dakota, 1971.
  6091. SC Wu
    Wave propagation in a fibre reinforced cylinder
    PhD, Texas @ Austin, 1973. DA7326111.
  6092. JJ-L Wu
    Large deflection of a viscoelastic composite beam
    PhD, Pittsburgh, 1975.
  6093. RS Wu
    Line force in composite materials
    Masters, Lehigh, 1976.
  6094. C-TD Wu
    On the determination of effective mechanical properties for heterogeneous systems
    PhD, Delaware, 1976. DA7624271.
  6095. CH Wu
    Thermal deformation and stresses in laminated plates
    Masters, Kentucky, 1979.
  6096. WP Wu
    The prediction and measurement of long-term creep durability of biomaterials
    DSc, Washington University-MO, 1981.
  6097. MY Wu
    Internal stress superplasticity in metal & metal-matrix composites
    PhD, Stanford, 1984.
  6098. J-K Wu
    Optimisation of material damping and stiffness of laminated fibre-reinforced composite structural elements
    PhD, Florida, 1985. DA8615526.
  6099. B Wu
    Stress intensity factors in an orthotropic plate containing surface cracks
    Masters, Lehigh, 1986.
  6100. CML Wu
    Theoretical investigation of stress concentrations in carbon fibre reinforced plastic plate structures
    PhD, Bristol, March 1986. D69536/86. ASLIB 36(3)6437. ETN-87-90710. N87-29607.
  6101. WP Wu
    Application of smeared crack finite element methods to orthotropic materials
    Masters, West Virginia, 1986.
  6102. HF Wu
    Lifetime statistics for single Kevlar 49 aramid filaments in creep-rupture at elevated temperatures
    PhD, Cornell, 1987. DA8708918.
  6103. H-YT Wu
    Impact damage of composites
    PhD, Stanford, 1987. DA8707767.
  6104. SD Wu
    Synthesis and characterisation of modified poly(arylene ether ether ketone) copolymers
    PhD, VPI&SU, 1987. DA8719081.
  6105. SY Wu
    Bounds on natural frequencies of composite circular plates-integral equation method
    Masters, Arizona SU, 1987.
  6106. Chih-Ping Wu
    Thermal-mechanical behaviour of thin films and laminates
    PhD, Ohio SU, 1988. DA8820374. DAIB 49(8)3290.
  6107. GM Wu
    Characterisation of oriented PEEK
    Masters, Delaware, 1988.
  6108. San-Jarn Wu
    The influence of anisotropy of the microstructure on the overall elastic-plastic response of fibrous metal-matrix composites
    PhD, UIUC, 1989. DA9015670. DAIB 51(1)283.
  6109. Binghua Wu
    Structure and through crack problems in layered orthotropic plates
    PhD, Lehigh, 1990. DA9109588. DAIB 51(11)5418.
  6110. Herng-Tay Wu
    Knowledge-based control of composite material manufacturing processes
    DSc, Washington Univ - MO, 1990. DA9114727. DAIB 51(12)6009.
  6111. Hwai-Chung Wu
    Modelling of fibrous assemblies: tensile and bending behaviour
    PhD, MIT, 1990. DA-382098.
  6112. Mianxue Wu
    Oriented silicon carbide whisker-reinforced mullite composites: laminate processing, structure and properties
    PhD, Pennsylvania SU, 1990. DA9104996. DAIB 51(9)4551.
  6113. Minglun Wu
    Fibre degradation of reinforced thermoplastics during twin-screw compounding
    MSEng, Lowell, 1990. MA1342557. MS 29(2)320.
  6114. Nanping Wu
    Dynamic thermoelastic response of spinning orthotropic cylindrical shells based on the generalised theory
    PhD, Wisconsin: Madison, 1990. DA9025741. DAIB 51(4)2025.
  6115. Xiang Wu
    Thermoforming continuous fibre-reinforced thermoplastic composites
    PhD, Georgia IT, 1990. DA9115404. DAIB 52(1)394.
  6116. Gwo-Mei Wu
    Processing-structure-property characterisation in advanced thermoplastics and thermoplastic compoite materials
    PhD, Delaware, 1991. DA9223683. DAIB 53(4)2016.
  6117. Jer-Fang Wu
    Numerical techniques for elastic-plastic analysis of fibrous metal matrix composites
    PhD, RPI, 1991. DA9209294. DAIB 52(10)5430.
  6118. Wei-Pin Wu
    Thermomechanical properties of fibre reinforced plastic (FRP) bars
    PhD, West Virginia, 1991. DA9203875. DAIB 52(8)4433.
  6119. Chung-Lin Wu
    Low-velocity impact of composite sandwich plate
    PhD, Purdue University, 1992.  AAD9301415  DAIB53(9)4798
  6120. Tsung-Hsiun Wu
    Effect of moisture on mechanical properties of glass fiber-filled nylon-66
    MSEng, University of Massachusetts - Lowell, 1993.  AAD1354399  MA32(2)719
  6121. Zhihong Wu
    Reactions on carbon fiber surfaces:  grafting small polymers and model compounds onto epoxide and carboxyl-functionalized fiber surfaces
    MS, Mississippi State University, 1994.  AAD1359149  MA33(2)537
  6122. Thomas Anthony Wunderlich
    Thermal conductivity and expansion of metal matrix composites
    MS, CSULB, 1991. MA1346901. MA 30(3)777.
  6123. PM Wung
    Stationary temperature distribution in an orthotropic pressure vessel subjected to axisymmetric thermal loading
    Masters, Kentucky, 1980.
  6124. C-Y Wung
    Thermoplasticity analysis of fibrous composites in strain-space formulation
    PhD, RPI, 1984.
  6125. C-J Wung
    Strain-space analysis of plasticity, fracture and fatigue of fibrous composites
    PhD, Utah, March 1987. DA8706371.
  6126. Pey Min Wung
    Large deformation analysis of laminated composite structures by a continuum-based shell element with transverse deformation
    PhD, VPI&SU, 1989. DA9008046. DAIB 50(10)4619.
  6127. H Wurtinger
    Einfluf von Schwingbelastun auf E-modulu Rest-Kurzzeit-festigkeit von verschid GFK Laminaten
    [Influence of cyclic loading on E-moduli residual static strength of dissimilar GRP laminates].
    Dr.Ing, TH Darmstadt, 13 February 1970.
  6128. W Wuttge
    Beitrag zur beschreibung des mechanischen verhaltens von linear viskoelastischen hochpolymeren
    [Mechanical condition for linear viscoelastic high polymers]
    Dissertation, TU Munchen, 1972.
  6129. RC Wyatt
    The effect of water immersion on polyester resins
    MSc, Bristol, 1967!.
  6130. BR Wyerman
    Absorption characteristics of glass fibre materials at normal & oblique incidence
    MS, Pennsylvania SU, June 1974. N74-26051. NASA-CR-132451.
  6131. DA Wyrick
    The effects of repeated impact on a carbon/epoxy composite material
    Masters, Wyoming, 1987.
  6132. M Xanthos
    High aspect ratio mica reinforced thermosets
    PhD, Toronto-Canada, 1974.
  6133. Kenong Xia
    Deformation behaviour at elevated temperatures in alumina matrix composites reinforced with silicon-carbide whiskers
    PhD, Southern California, 1988. DAIB 49(8)3388.
  6134. Y Xia
    Behaviour of laminated beams and plates under impact loading
    DPhil, Oxford, 1989. D78355.
  6135. Zhiyong Cedric Xia
    Micromechanics of fiber-reinforced ceramic composites
    PhD, Harvard University, 1994.  AAD9421984  DAIB55(3)993
  6136. XR Xiao
    Viscoelastic characterisation of thermoplastic matrix composites
    PhD, VUB Brussels, November 1987.
  6137. Cai Xiaopeng
    Analysis of complex moduli of fibre reinforced composite materials by using a complex finite element scheme
    Masters, Shanghai Jiao Tong Univ, 1987.  In Chinese.
  6138. M Xie
    Sur la morphologie et les composites de polymeres ether bloc amide
    [Morphology and composites of ether-amide block copolymers]
    Thesis, INSA Lyon, 1987. DAIC 48/3349C.
  6139. Ming Xie
    A study of compression and shear test methods for composite materials using a nonlinear finite element analysis
    PhD, University of Wyoming, 1994.  AAD9503439  DAIB55(8)3546
  6140. Zhiyun Xie
    An analytical approach to the thermal residual stress problem in fiber-reinforced composites
    PhD, Florida State University, 1995.  AADAAI9526758  DAB56(4)2291
  6141. X Xinran
    Viscoelastic characterisation of thermoplastic matrix composites
    PhD, VUB Brussels, 1987.
  6142. Y Xiong
    <composite cantilever with a tangential force follower>
    PhD, Beijing Univ Aeronautics & Astronautics, 1988.
  6143. Z Xiong
    Deformation behaviour of SiCw/6061 Al composite
    Masters, Harbin IT, 1989.
  6144. Shanji Xiong
    An anisotropic damage model for inelastic solids
    PhD, Columbia University, 1993.  AAD9412863  DAIB54(12)6294
  6145. Y-H Xu
    The generation of non-linear constitutive expressions for anisotropic materials
    PhD, Lehigh, 1985. DA8516265.
  6146. YongLi Xu
    Effect of high-temperature and fibre distribution on matrix microcracking and toughness of ceramic matrix composites
    PhD, City University of NY, 1991. DA9130390. DAIB 52(5)2736.
  6147. Changshi Xu
    Nonlinear theory and analysis of laminated shallow spherical shells
    PhD, University of Calgary, 1992.  AAD0385103  AADNN75246  DAIB54(2)992
  6148. Hong Xu
    Application of a linear viscoelastic plate theory to hygroscopic warping of laminates
    PhD, Michigan State University, 1993.  AAD9418089  DAIB55(2)257
  6149. Huakun Xu
    Crack-bridging toughening in monolithic ceramics and continuous-fiber ceramic composites at ambient and elevated temperatures
    PhD, University of Maryland, 1993.  AAD9407726  DAIB54(10)5347
  6150. Dan Ping Xu
    Theoretical and experimental investigation on hygroscopic warping of wood composite panels
    PhD, Michigan State University, 1994.  AAD9431335  DAIB55(7)2480
  6151. Guanshui Xu
    Three dimensional elastic analysis of crack growth and toughening mechanisms of brittle matrix composites
    PhD, Brown University, 1994.  AAD9433472  DAIB55(7)2981
  6152. G Xue
    The reinforcement mechanism of polyester reinforced rubber.
    PhD, CWRU, 1983. DA8405237.
  6153. EE Yakobson
    Influence of filling on the viscosity, elasticity and viscoelasticity of liquid polymers
    Dissertation, Riga, 1978.
  6154. S Yalvac
    Fracture behaviour of polymer-ceramic composite biomaterials
    PhD, Michigan, 1982. DA8225078.
  6155. SE Yamada
    A theoretical and experimental study of strength and its distribution in fibre reinforced composites
    PhD, Purdue, 1976. DA771803.
  6156. R Yamada
    Pressureless sintering of short fibre reinforced mullite
    Masters, University of Washington-WA, 1987.
  6157. S Yamini
    Crack propogation in epoxy resins
    PhD, London, 1979. D28586.
  6158. Gongpu Yan
    The stress singularities at interface cracks in thermo-anisotropic biomaterials
    PhD, University of Illinois - Chicago, 1994.  AAD9426679  DAIB55(5)1910
  6159. Kuei-Hsiung Yang
    The effects of environment on the morphology and mechanical properties of unfilled and graphite-reinforced polysulphone and poly(2,6-dimethyl)phenyleneoxide
    DSc, Washington University-MO, 1972. DA7311827.
  6160. Y Yang
    Characterisation and kinetic study of NMA/PGE/BDMA/ROH epoxy resin system
    Masters, Nebraska, 1977.
  6161. JF Yang
    Couple stress effects in composite materials
    PhD, Iowa, 1981 DA8210067.
  6162. S-H Yang
    Static and dynamic contact behaviours of composite laminae
    PhD, Purdue, August 1981. DA8200751.
  6163. C-MP Yang
    Mechanical properties and environmental effects of epoxy resins in the neat state and in composites
    PhD, RPI, 1984. DA8500970.
  6164. I-H Yang
    Passive twist redistribution for composite helicopter blades using the centrifugal field: body force tailoring
    PhD, RPI, 1984. DA8428362.
  6165. F Yang
    Study of factors affecting water absorption of tetraglycidyl -4,4'-diaminodiphenyl methane and N, N'-diglycidyl aniline cured with diaminodiphenyl sulphone epoxy resin systems.
    PhD, NCSU Raleigh, 1984. DA8507026.
  6166. CL Yang
    Stress computations for hybrid composites.
    Masters, Lehigh, 1985.
  6167. J-M Yang
    Modelling and characterisation of 2-D and 3-D textile structural composites
    PhD, Delaware, 1986. DA8629310.
  6168. XL Yang
    Optimisation of laminated plates relative to stiffness and strength
    Masters, SDSMT, 1986.
  6169. SH Yang
    Stiffness degradation of composite laminates.
    DSc, GWU, 1987. DA8725939.
  6170. Y-S Yang
    Free radical crosslinking copolymerisation of styrene-unsaturated polyester resins
    PhD, Ohio SU, 1988. DA8812311.
  6171. Shiuh-Kuang Yang
    Elastic waves in structurally chiral composites
    PhD, Pennsylvania SU, 1990. DA9032399. DAIB 51(6)2979.
  6172. Wun-Dar Yang
    Rubber-grafted synthetic fibres for elastomer reinforcement
    PhD, Tufts, 1990. DA9028618. DAIB 51(8)4032.
  6173. Heechun Yang
    Modeling the processing science of thermoplastic composite tow prepreg materials
    PhD, Georgia Institute of Technology, 1992.  AAD9315924  DAIB54(1)457
  6174. Chihdar Yang
    Stress-strain analysis of adhesive-bonded composite single-lap joints under various loadings
    PhD, Louisiana State University and A&M College, 1993.  AAD9405430  DAIB54(9)4888
  6175. Qinghui Yang
    Predicting dynamic residual properties for laminated composites:  a finite element based approach
    PhD, Florida Institute of Technology, 1993.  AAD9335182  DAIB54(8)4241
  6176. Ruey-Bin Yang
    Multiple scattering of elastic waves in composite materials
    PhD, University of California - Los Angeles, 1993.  AAD9408235  DAIB54(10)5361
  6177. Wei Yang
    Interaction of acoustic waves and anisotropic multilayered composite plates immersed in water
    PhD, University of Arizona, 1994.  AADAA19517571  DAB56(1)288
  6178. Yaping Yang
    Development of silicon carbide whisker/chopped silicon carbide fiber reinforced (calcium (0.6), magnesium (0.4) zirconium (4) (phosphate) (6) ceramic matrix composites
    PhD, Virginia Polytechnic Institute and State University, 1994.  AAD9500830   DAIB55(8)3531
  6179. Chung-Chia Yang
    Micromechanics of fibre-reinforced brittle-matrix composite materials
    PhD, NWU, 1991. DA9129090. DAIB 52(5)2642.
  6180. G Yaniv
    Hygrothermal effects on the time-dependent mechanical behaviour of multi-material multi-layered bonded systems.
    PhD, Technion-Haifa, 1984.
  6181. T Yao
    Effect of load introduction on graphite epoxy compression specimens
    Masters, Howard, 1981.
  6182. Y Yao
    Adaptive position/force control and calibration of robotic manipulators as applied to automated composite tape-laying
    PhD, Wisconsin: Madison, 1988. DA8801509.
  6183. SC Yap
    The influence of manufacturing variables on the static and dynamic compressive strength of prepreg moulded materials
    PhD, Loughborough UT, June 1991.
  6184. IA Yargicoglu
    A 3D finite element model with substructuring for predicting the influence of structural discontinuities on composite rotor blades
    PhD, Texas @ Austin, 1979. DA8009955.
  6185. E Yaron
    Glass reinforced polyester elements in industrialized building techniques
    MSc, Technion-IIT Israel, 1972.
  6186. CP Yarwood
    Acoustic emission from glass fibre reinforced polyester resin
    PhD, Liverpool, 1976.
  6187. VF Yatsenko
    Some problems encountered during investigation of the mechanical properties of laminated plastics and wood
    Doctorate, Tech.Sci-Kiev, 1975.
  6188. A Yau
    Experimental techniques for measuring dynamic mechanical behaviour of composite materials
    MS, Idaho, July 1980.
  6189. S-S Yau
    Crack propagation in corrosion fatigue of metal matrix composites
    PhD, NCSU Raleigh, 1983. DA8429020.
  6190. DM Yeager
    Nonlinear acoustic wave interactions in layered media.
    Masters, Pennsylvania SU, 1980.
  6191. GY Yee
    An investigation of adhesion mechanisms
    MS(ME), MIT, September 1986.
  6192. MS Yeganeh
    The effect of filler in an epoxy/amine composite on cure kinetics
    Masters, PI Brooklyn, 1988.
  6193. J-R Yeh
    Three-dimensional finite element analysis of failure in composite laminates
    PhD, RPI, 1985. DA8528673. N86-24768.
  6194. H-Y Yeh
    The effect of transverse shear deformation on the stability analysis of rectangular composite plates
    PhD, S.California, 1987.
  6195. Min-Chyuan Yeh
    Time-dependent structural behaviour of wood composite panels
    PhD, Auburn, 1990. DA9109163. DAIB 51(11)5117.
  6196. Nan-Ming Yeh
    Thermoviscoplastic analysis of metal matrix composites
    PhD, RPI, 1991. DA9220917. DAIB 53(3)1577.
  6197. NAB Yehia
    Automatic tracking of micromechanical cracking via finite elements
    PhD, RPI, August 1984.
  6198. SC Yen
    Vibration characteristics of graphite epoxy composite plates
    Masters, Missouri-Rolla, 1980.
  6199. S-C Yen
    The creep and creep rupture of SMC-R50 under different thermomechanical conditions
    PhD, VPI&SU, March 1984. DA8417842.
  6200. Bing Kang Yen
    Transverse deformation of unidirectional fibre-reinforced metal matrix composites
    PhD, California: Berkeley, 1991. DA9203771. DAIB 52(8)4434.
  6201. Stephen Andrew Yencho
    The continuous die-less forming of thermoplastic-matrix fiber composites
    PhD, Stanford University, 1993.  AAD9309687  DAIB53(11)5929
  6202. MR Yendrzeski
    Diffusion as a method of eliminating air voids in filament wound reinforced composites
    Masters, Vermont, 1965.
  6203. JK Yeo
    Three dimensional analysis of harmonic waves in periodically laminated medium
    Masters, Manitoba, 1983.
  6204. Incheol Yeo
    Reliability and failure analyses of composite beams and plates containing stress concentrations
    PhD, VPI&SU, 1991. DA9204654. DAIB 52(8)4331.
  6205. Chan Hong Yeom
    An assumed strain finite element model for composite shells undergoing large deflection
    PhD, Maryland, 1989. DA9021607. DAIB 51(3)1376.
  6206. YT Yeow
    The time-temperature behaviour of graphite-epoxy laminates.
    PhD, VPI&SU, May 1978. DA7818563.
  6207. PC-N Yeung
    Investigation of constraint effects on flaw growth in composite laminates
    PhD, VPI&SU, 1979. DA8020238. N80-31478.
  6208. PHJ Yeung
    Structure and deformation of polydiacetylene single crystal fibres
    PhD, London: QMC, 1985. ASLIB 35-6227.
  6209. S Yi
    Time-dependent behaviour of composite laminates in Hygrothermal environments
    Masters, University of Washington-WA, 1987.
  6210. Sung Yi
    Finite element analysis of anisotropic viscoelastic composite structures and analytical determination of optimum viscoelastic material properties
    PhD, UIUC, 1992. DA9215915. DAIB 53(1)410.
  6211. Youzhi Yi
    Bi-axial stress-strain relation of fabric flexible composites under finite deformation
    MS, University of Nevada - Reno, 1992.  AAD1350017  MA31(1)429.
    >>> K Yih-Renn, see YR Kan.
  6212. Hasan Yildiz
    Composite hip prosthesis design
    PhD, Stanford University, 1994.  AAD9430028  DAIB55(7)2876
  6213. Hyunjune Yim
    Acousto-ultrasonic nondestructive characterization of interphases in fiber composites
    PhD, Massachusetts Institute of Technology, 1993.  AAD0574201  DAIB54(10)5361
  6214. Jong Hee Yim
    Prediction of damping in laminated, partially delaminated and textile structural composites
    PhD, Auburn University, 1995.  AADAAI9531046  DAB56(5)2833
  6215. Ching-Chung Yin
    Guided-waves in fibre-reinforced composite laminates
    PhD, UCLA, 1990. DA9033932. DAIB 51(7)3537.
    >>> L Yin, see Yin Le.
  6216. L Ying
    Surface modification of graphite fibres via plasma polymerisation
    Masters, Tufts, 1980.
  6217. X Ying
    A reliable root solver for automatic computation with application to stress analysis of a composite plane wedge.
    DSc, Washington University-MO, 1986. DA8709965.
  6218. HWC Yip
    An investigation of the interfacial bond strength in E-glass fibre polyester resin composite systems
    PhD, Liverpool, 1975!.
  6219. ES Yip
    Effective properties of composite materials
    Masters, University of Washington-WA, 1984.
  6220. LT Yokota
    Creep characteristics of a rectangular honeycomb sandwich panel under lateral uniform load for simple support edge condition.
    Masters, UCLA, 1969.
  6221. KY Yon
    Effect of carbon fibre surface properties on adhesion to organic polymers
    Masters, Utah, 1988.
  6222. O Yong-Sok
    Contribution a l'etude de la viscoelasticite des materiaux composites verre/polyester et carbone/epoxyde
    [Viscoelasticity of glass/polyester and carbon/epoxy composites]
    These d'etat, Lyon I, 1984.
  6223. In Seon Yoon
    Experimental verification of simulation models for the processing of condensation polyimide thermoplastic composites
    DSc, Washington Univ - MO, 1990. DA9114729. DAIB 51(12)6010.
  6224. Kwang-Joon Yoon
    Characterisation of elastic-plastic and viscoplastic behaviour of AS4/PEEK thermoplastic composite
    PhD, Purdue, 1990. DA9116492. DAIB 52(1)368.
  6225. Tae-Ho Yoon
    Adhesion study of thermoplastic polyimides with titanium-6 aluminium-4 vanadium alloy and PEEK-graphite composites
    PhD, VPI&SU, 1991. DA9201157. DAIB 52(7)3849.
  6226. J York
    Fibre orientation in curvilinear flow
    Masters, Delaware, 1982.
  6227. BA Yost
    Predicting the notched strength of composite materials.
    MMAE, Delaware, August 1981.
  6228. BA Yost
    The analysis of fluid flow/solidification problems in arbitrarily shaped domains
    PhD, Delaware, 1984.
  6229. JR Youn
    Lightweight polyester composites
    PhD, MIT, 1984.
  6230. Younghan Youn
    Determination of effective elastic properties and thermal residual stresses in fibre-reinforced composites by boundary element method
    PhD, Michigan SU, 1988. DA8912661. DAIB 50(3)1018.
  6231. RH Young
    Rheology of asbestos filled polystyrene
    Masters, Newark Coll.Engg, 1969.
  6232. CA Young
    Strength of internally strained brittle matrix composites.
    MS, California: Berkeley, December 1970. UCRL-20395. N71-26987.
  6233. DS-S Young
    Two mixture theories for transverse waves in composites.
    Masters, Texas @ Austin, 1975.
  6234. BG Young
    A finite element analysis of fibre reinforced composite laminates containing circular cutouts
    Masters, Toronto, 1985.
  6235. KW Young
    Computer aided design and manufacture for filament wound reinforced plastics
    PhD, Nottingham, October 1986. D72069/87. ASLIB 36(4)8778.
  6236. RMK Young
    The processing of metals as semisolid slurries
    PhD, Surrey, 1986.
  6237. Allen Paul Young
    Thin laminate resonant shielding
    MS, CSULB, 1990. MA1342872. MA29(3)481.
  6238. Wen-Bin Young
    Numerical and experimental studies of liquid injection moulding with preplaced fibre mats
    PhD, Ohio SU, 1991. DA9130595. DAIB 52(5)2747.
  6239. J Young, supervisor of IR Farrow thesis,
    incorrectly appears as author in BRTT 90-12-11M-015.
  6240. Hamdy Abo-Elfotouh Yousef
    Low-toughness fracture in aluminium-silicon carbide metal matrix composites
    PhD, IIT, 1990. DA9117601. DAIB 52(1)490.
  6241. M Yozo
    Mechanics of coated fibre composites
    PhD, Ann Arbor, 1985. DA8511217.
  6242. JL Ytsma
    A program for analysis of random fibre composite materials
    Masters, University of Washington-WA, 1984.
  6243. ML Yu
    Optimal torque and stress balanced design of helically armoured cables
    Masters, Hawaii, 1984.
  6244. LM Yu
    A stress-strain relation for coated fabrics
    PhD, Columbia, 1986. DA8610823.
  6245. Wei-Ching Yu
    Azochromomorphic photochemical and photophysical tools for the study of physical ageing and epoxy cure
    PhD, Connecticut, 1988. DA8904643. DAIB 49(12)5337.
  6246. Tung-Pei Yu
    Analysis of cracks in nonlinear fibre composite materials
    PhD, UIUC, 1990. DA9114478. DAIB 51(12)5966.
  6247. Chang-Te Yu
    Fracture process zone of brittle composites
    PhD, University of Washington, 1992.  AAD9312767  DAIB54(1)457
  6248. Niann-I Yu
    Overall properties of composite materials: a general model based on periodic microstructure
    PhD, University of California - San Diego, 1992.  AAD9312117  DAIB53(12)6385
  6249. Hao Yu
    Performance of a higher-order triangular finite element for composite laminated structures
    PhD, University of Nebraska - Lincoln, 1993.  AAD9322819  DAIB54(4)2054
  6250. Jenny Z Yu
    Evaluation of the conformability of textile preforms for automobile composite applications
    MS, Drexel University, 1993
  6251. Zuoxing Yu
    Characterization of nylon/Kevlar composites processed by injection moulding
    PhD, Universite Laval - Canada, 1993.  AADNN86872  DAIB55(4)1550
  6252. Jae-Woong Yu
    UV reflection and luminescence for characterization of cure in epoxies, polyimides and composites
    PhD, University of Connecticut, 1994.  AADAAI9525698  DAB56(4)2055
  6253. FG Yuan
    A singular hybrid finite element analysis of boundary-layer effects in composite laminates
    Masters, UIUC, 1981.
  6254. J-Y Yuan
    Irreversible deformation processes in PVC and its short glass fibre reinforced composites
    PhD, CWRU, 1985. DA8601934.
  6255. F-G Yuan
    Postbuckling analysis of delaminated composite plates under compression
    PhD, UIUC, 1986. DA8701664. N87-22266.
  6256. Tsorng-Tau Yuan
    Rheological properties of long glass fiber reinforced polypropylene
    MSEng, University of Lowell, 1992.  AAD1350537  MA31(2)915
  6257. Zechuen Yuan
    Biaxial constitutive relations of plain weave fabric flexible composites
    MS, University of Nevada - Reno, 1993.  AAD1356447  MA32(5)1465
  6258. Kuo-An Yuan
    Aeroelasticity and structural optimization of composite helicopter rotor blades with swept tips
    PhD, University of California,  1994.  AADAA19517734  DAB56(1)367
  6259. JKL Yuann
    Mechanical properties of anisotropic semicrystalline polymers
    DSc, Washington University-MO, 1981.
  6260. H Yuce
    Ultrasonic and mechanical characterisations of fatigue state of graphite/epoxy composite laminates
    Masters, MIT, 1982.
  6261. U Yuceoglu
    A survey of sandwich shells
    Masters, PINY Brooklyn, 1965.
  6262. Seunghee Yun
    Fiber-matrix adhesion in single-fiber model composites
    PhD, University of Akron, 1994.  AAD9425867  DAIB55(4)1509
  6263. D Yunliang
    Optimum design of structures using hybrid approximation techniques and dual solution
    Doctorate, KTH Stockholm, 1988.
    >>> Ding Yunliang, see Y Ding.
  6264. Hu Yuntao
    Design allowables of composite materials
    MS, Beijing Research Institute Materials & Technology, 1990.
  6265. SW Yurgartis
    The influence of matrix properties and composite microstructure on the longitudinal compression strength of high performance composite
    PhD, RPI, 1988. DA8808203.
  6266. AA Yurko
    Computational finite element modelling analysis of thermal and structural response in layered materials
    Masters, West Virginia, 1987.
  6267. Stephen Vincent Zaat
    The effects of ionised gas exposure on the toughness and fatigue properties of aluminium alloys and composites
    PhD, CWRU, 1992. DA9220026. DAIB 53(2)1037.
  6268. Ali Zadhoush
    The influence of defects on the mechanical properties of short fibre reinforced thermoplastics
    PhD, Brunel, March 1989. DX92240. DAIB 52(1)466.
  6269. GJ Zahar
    Flexural behaviour of mortar reinforced with carbon fibres
    Masters, MIT, 1987.
  6270. Derek Bassett Zahl
    3-Dimensional strengthening of metal matrix composites reinforced with short fibers
    PhD, University of California - Santa Barbara, 1993.  AAD9334896  DAIB54(7)3825
  6271. NM Zahlan
    Compressive stability of delaminated random short-fibre SMC composites
    MS, UIUC, October 1984.
  6272. RR Zahran
    Prediction and measurement of the thermal dimensional stability of oriented polyethylene solids
    DSc, Washington University-MO, 1986.
  6273. MA Zaidi
    Etude du comportement viscoelastique de stratifies carbone-epoxyde
    [Study of viscoelastic loading in laminated carbon-epoxy]
    DIng, UT Compiegne, 10 May 1982.
  6274. Matityahu Zaidman-Dvir
    Constitutive models for composite materials with evolving microstructure (strain localization, shape evolution)
    PhD, University of Pennsylvania, 1994.  AADAAI9523919  MAB56(2)1066
  6275. VN Zakharov
    Effect of service factors on the cyclic strength of glass-reinforced plastics used in shipbuilding
    Dissertation, Tech.Sci.Leningrad, 1970.
  6276. Rafael Jesus Zaldivar
    Fundamental studies on the microstructural and mechanical behavior of polyarylacetylene-derived carbon/carbon composites
    PhD, University of California - Los Angeles, 1992.  AAD9301589  DAIB53(9)4895
  6277. MA Zamzam
    <pin-on-disc wear tests of glass fibre reinforced epoxy composites>
    Dissertation, Ain-Shams Univ: Cairo, 1985.
  6278. JG Zandbergs
    Finite element fracture prediction for orthotropic inhomogeneous materials
    Masters, Colorado SU, 1985.
  6279. AM Zaper
    Spectroscopic studies of poly(vinylchloride) composites.
    Masters, CWRU, 1984.
  6280. S Zarmi
    Mechanical properties of glass fibre reinforced polyimides.
    MSc, Hebrew Univ-Israel, 1979.
  6281. Joseph F Zarzour
    Crack interactions and strength predictions in fibrous metal matrix composites
    PhD, RPI, 1991. DA9202218. DAIB 52(8)4435.
  6282. JL Zegarelli
    Torsional stiffness of composite rectangular cross sections
    Masters, Syracuse, 1971.
  6283. TA Zeiler
    An approach to integrated aeroservoelastic tailoring for stability
    PhD, Purdue, 1985. DA8529352.
  6284. VL Zemlyakov
    Development and examination of the main parameters of winding systems of machines for the production of fibreglass reinforced plastic components
    Dissertation, Tech.Sci.Kharkov, 1974.
  6285. Kaiyang Zeng
    Crack propagation in ceramic composites
    TeknDr,  Kungliga Tekniska Hogskolan - Sweden, 1992.  AADC322462  DAIC55(1)295
  6286. Shangying Zeng
    Layered advanced thermosetting polymer systems
    PhD, University of Washington, 1994. AAD9504707  DAIB55(9)4015
  6287. Jing Zeng
    DSC studies of cure kinetics for epoxy-amine systems and measurements of toughness for epoxy-based materials
    PhD, Kansas State University, 1995.  AADAAI9536330  DAB56(6)3331
  6288. D Zenkert
    Sandwich constructions: development of a new structural element and fracture of core materials
    Licentiate 88-20, KTH Stockholm, 1988.
  6289. Dan Zenkert
    Damage tolerance of foam core sandwich constructions
    Tekn dr 90-08, Kungliga Tekniska Hogskolan (KTH) - Stockholm, 1990.
    DA-C168521. DAIC 52(2)284. KTH Report 90-8
  6290. TR Zerbe
    Vibration analysis of a laminated plate.
    Masters, NWU, 1970.
  6291. ME Zermeno de Leon
    L'etude du comportement mecanique de cables composites
    Application a la mise en precontrainte d'ouvrage du genie civil
    Doctorate, INSA-Lyon, 20 Mai 1988. DAIC 49(4)2800.
  6292. Cheryl Ann Zern
    Strengthening and toughening mechanisms in ceramic fibre-reinforced glass matrix composites
    PhD, Rutgers: SUNJ New Brunswick, 1989. DA9013470. DAIB 50(12)5834.
  6293. VN Zhakharov
    Effect of operational factors on fatigue strength of glass fibre reinforced plastics for shipbuilding
    PhD, Tech.Sci-Leningrad, 1970.
  6294. Y Zhang
    Buckling and post buckling behaviour of generally layered composite panels
    PhD, London: ICST&M, October 1982.
  6295. Daqing Zhang
    Anisotropic damage: thermoelasticity theory and verifications
    PhD, Wisconsin: Madison, 1989. DA8917679. DAIB 50(9)4085.
  6296. Shao Qin Zhang
    An energy-based fracture criterion for fibre composites
    PhD, Auburn, 1989. DA9109165. DAIB 51(11)5546.
  6297. Yikang Zhang
    An indirect boundary element method for isotropic and orthotropic plates
    PhD, Michigan Tech Univ, 1989. DA9033298. DAIB 51(6)3096.
  6298. Yongping Zhang
    A thermodynamic method for evaluation of the glass-fibre reinforced epoxy composites
    MSc, Queens University Kingston, 1990. MM61626. MA 30(3)874.
  6299. Hongyan Zhang
    Numerical and analytical predictions of thermo-mechanical behaviour of metal matrix composites
    PhD, Ohio SU, 1991. DA9211257. DAIB 52(11)6052.
  6300. Guo-Qi Zhang
    Stability analysis of anisotropic conical shells
    PhD, Technische Universiteit te Delft - Netherlands, 1993.  AADC348211  DAIC55(2)669
  6301. Xiao-Dong Zhang
    The use of expanding monomers in carbon fibre composites
    MASc, University of Toronto, 1993.  AADMM83550  MA32(3)1014
  6302. Wenbin Zhang
    Delamination studies of ceramic matrix composite laminates
    PhD, Michigan Technological University, 1994.  AAD9425345  DAIB55(4)1636
  6303. Yanhong Zhang
    An investigation of shear response of composite material systems
    PhD, Virginia Polytechnic Institute and State University, 1994.  AAD9424907  DAIB55(4)1637
  6304. Guoquan Zhao
    In-plane indentation of an isotropic reinforced finite strip
    PhD, Connecticut, 1988. DA8904646. DAIB 49(12)5494.
  6305. Dafang Zhao
    A literature survey of composites in rigid printed circuit boards
    MS, Lowell, 1991. MA1346117. MA 30(1)142.
  6306. Yonglu Zhao
    Failure analysis of high-temperature [ceramic matrix] composites
    PhD, University of Missouri - Rolla, 1993.  AAD9417907  DAIB55(2)563
  6307. Wenxin Zheng
    The null-field approach to electromagnetic scattering and resonance properties of composite objects
    Tekn.dr, KTH Stockholm, 1989. DA-150136. DAIC 51(4)612.
  6308. IG Zhigun
    Effect of bending of reinforcement fibres on stiffness and strength of composite materials
    Dissertation, Riga, 1968.
  6309. VA Zhilkin
    Using the method of photoelastic coatings to examine anisotropic problems
    Dissertation, Tech.Sci-Novosibirsk, 1971.
  6310. Wei Zhong
    An elasto-plastic constitutive analysis of cross-ply fibre reinforced composites
    PhD, University of California, 1995.  AADAAI9530015  DAB56(5)2769
  6311. SG Zhou
    Failure of quasi-isotropic composite materials under off-axis loading
    Masters, Purdue, May 1984.
  6312. SG Zhou
    Failure analysis of quasi-isotropic composite laminates with free edges under off-axis loading
    PhD, Purdue, 1987. DA8729815.
  6313. NJ Zhou
    Production and properties of weft-inserted warp knitted fabrics
    PhD, Leeds, July 1988. D78147. ASLIB 39(1)2324.
  6314. Weiyu Zhou
    Crash-impact behaviour of graphite/epoxy sine wave webs
    PhD, Georgia IT, 1989. DA9014874. DAIB 51(1)306.
  6315. Weixing Zhou
    The effects of spiro ortho carbonates on properties of unsaturated polyester resin and its fibre composites
    MASc, University of Toronto, 1992.  AADMM78538  MA31(4)1861
  6316. Yiping Zhou
    Optimal design of reinforcement plates in a penstock bifurcation using a sensitivity analysis technique
    PhD, University of Illinois - Chicago, 1993.  AAD9324317  DAIB54(4)2108
  6317. Run Chen Zhou
    Finite element analysis for nonlinear flutter suppression of composite panels at elevated temperatures using piezoelectric materials
    PhD, Old Dominion University, 1994.  AADAA19514750 DAB56(1)486
  6318. Ming Zhou
    The analysis of multiple cracks in nonhomogeneous materials
    PhD, University of Akron, 1995.  AADAAI9544114  DAB56(8)4482
  6319. YM Zhu
    Transformation de Wigner-Ville des signaux et des images
    [Image processing of radiographs of woven reinforced composites]
    PhD, INSA Lyon, 1988.
  6320. Zhen-Guo Zhu
    Micromechanics of time-dependent deformation in polycrystalline metals and composites
    PhD, Rutgers SUNJ, 1988.  DA8914256.  DAIB 50(4)1620.
  6321. Guoqi Zhu
    Penetration of laminated composites by projectiles
    PhD, California: Berkeley, 1990. DA9126860. DAIB 52(4)2266.
  6322. Han Zhu
    Effect of interfacial zone on mechanical behaviour and failure of fibre-reinforced composites
    PhD, NWU, 1990. DA9032025. DAIB 51(6)2980.
  6323. Yuduo Zhu
    Effects of environment of creep/recovery of aramid fibres
    PhD, Lehigh University, 1994.  AADAAI9513148  DAB55(12)5527
  6324. P Zhuang
    Fundamental studies on blends of a thermoplastic aromatic polyester liquid crystal with thermoplastics
    Masters, Akron, 1987.
  6325. HZ Ziary
    Effect of environment on static and fatigue properties of graphite/epoxy composite materials having negative Poisson's ratio
    Masters, Wichita SU, 1986.
  6326. CE Zimmer
    Sapphire whisker reinforced spinel
    Masters, NCSU, 1970.
  6327. Gregory Andrew Zimmerli
    Multilayer growth and wetting of films physisorbed on graphite
    PhD, Pennsylvania SU, 1990. DA9105002. DAIB 51(9)4428.
  6328. MC Zimmermann
    The design and analysis of absorbable and semi-absorbable composite fracture fixation devices
    PhD, Rutgers/SUNJ New Brunswick, 1985. DA8604873.
  6329. Thomas J E Zimmerman
    Development and testing of a composite ice-resisting wall
    PhD, University of Alberta, 1993.  AADNN82041  DAIB54(9)4830
  6330. Kristin Beth Zimmerman
    An experimental investigation of the optimum joining and repair of structural composites
    PhD, Michigan State University, 1994.  AADAAI9525032  DAB56(3)1675
  6331. VF Zinchenko
    Analysis of the relations between mechanical, acoustic, thermophysical and dielectric properties of glass-plastics.
    Dissertation, Riga, 1972.
  6332. Kiang Zing
    Crack propagation in ceramic composites
    Tekn Dr.,  Kinglike Tekniska Hogskolan, 1992.  AADC322462  DAC55(1)295
  6333. MR Zinn
    Wave propagation in anisotropic laminated rods
    Masters, MIT, 1988.
  6334. SM Ziola
    Strength determination of graphite/epoxy laminates by acoustic emission
    Masters, Nebraska, 1987.
  6335. BJ Ziolkowski
    Charakteristyki trwalosci zmeczeniowej belek przeklad owych z TWS przy wymuszeniach kinematycznych
    [Fatigue life characteristics of sandwich beams made of GRP under kinematic forcing]
    Dissertation, Poli.Wroclawska, 1982.
  6336. RM Zirin
    A finite element time integration method for the theory of viscoplasticity based on infinitesimal total strain and overstress.
    PhD, RPI, 27 April 1982.
  6337. KL Zissis
    The velocity of sound in two-phase mixtures
    Masters, Delaware, 1982.
  6338. GA Zizicas
    Stability of thin anisotropic elastic plates
    PhD, UCLA, 1952.
  6339. Changshi Zu
    Nonlinear theory and analysis of laminated shallow spherical shells
    PhD, University of Calgary, 1992.  AAD0395103
  6340. O Zubzanda
    The production and physical properties of carbon fibres.
    PhD, New South Wales-Australia, 1980.
  6341. ZA Zudans
    A new formulation and evaluation of elastic shell theory.
    PhD, Pennsylvania, 1964. DA6610689.
  6342. Joseph Robert Zuiker
    Elastic and inelastic micromechanical analysis of functionally graded materials and laminated structures using transformation fields
    PhD, Rensselaer Polytechnic Institute, 1993.  AAD9420377  DAIB55(3)993
  6343. JA Zukas
    Laminated cylindrical shells of pyrolytic graphite type materials
    Masters, Delaware, 1969.
  6344. Walter X Zukas
    Amine curing of epoxy resins
    PhD, Massachussetts, 1983. DA8317502. DAIB 44(4)1144.
  6345. S Zukowski
    Element kratowy o wlasciwosciach przydatnych do modelowania kontinuum sprezystego tarcz i plyt ortotropwych
    [Lattice element with properties useful in modelling elastic continuum of discs and orthotropic plates]
    Dr.inz, Poli.Wroclawska, 1976.
  6346. JR Zumsteg
    An analysis of through thickness stressed in bonded joints of composite materials
    Masters, Delaware, 1984.
  6347. AH Zureick
    Three-dimensional non-axisymmetric anisotropic stress concentrations
    PhD, UIUC, 1985. DA8521910.
  6348. M Zustra
    Evaluation of the potential health hazards associated with the machining of carbon fibre composites
    Masters, North Carolina @ Chapel Hill, 1987.
  6349. RI Zwiers
    Free-edge and contact-edge singularities in laminated composites
    PhD, Illinois @ Chicago Circle, 1982. DA8213934.
  6350. Arie Zwijnenburg
    Longitudinal growth, morphology and physical properties of fibrillar polyethylene crystals
    PhD, Groningen, 1978. RUG Library.
  6351. JG Zwissler
    The effect of varying the fibre parameters on the fracture properties of a ceramic-matrix/metal-fibre composite system
    PhD, NWU, 1976. DA7701394.
  6352. E Zywicz
    Local stress and deformation due to fabrication and transverse loading in an ideal continuously reinforced graphite/aluminium metal matrix composite
    MS(ME), MIT, 1986.

Created by John Summerscales on 28 October 2013 and updated on 03-Sep-2018 13:37. Terms and conditions. Errors and omissions. Corrections.