6th International Conference on Flow Processes in Composite Materials (FPCM-6)
Auckland NZ, 15-16 July 2002

Conference Chairman

Debes Bhattacharyya, University of Auckland

FPCM-6 International Technical Committee

SG Advani, University of Delaware, USA
M Bannister, Cooperative Research Centre for Advanced Composite Structures, Australia
RJ Craford, Queen's University Belfast, Northern Ireland
I Crivelli-Visconti, Università di Napoli, Italy
K Friedrich, IVW Kaiserslautern, Germany
RB Gebart, Luleå University of Technology, Sweden
J Goshawk, University of Wales Aberystwyth, Wales
TG Gutowski, Massachusetts Institute of Technology, USA
RS Jones, University of Wales Aberystwyth, Wales
PJ Mallon, University of Limerick, Ireland
J-A Månson, École Polytechnique Federale de Lausanne, Switzerland
CM ÓBrádaigh, University College Galway, Ireland
R Parnas, National Institute for Standards and Technology, USA
R Paton, Cooperative Research Centre for Advanced Composite Structures, Australia
RB Pipes, Rensselaer Polytechnic Institute, USA
AJM Spencer, University of Nottingham, England
J Summerscales, University of Plymouth, England
F Trochu, École Polytechnique Montréal, Canada
K Walters FRS, University of Wales Aberystwyth, Wales

Local Organising Committee (University of Auckland)

L Le (University of Sydney)
RJT Lin
E Millet
K Jayaraman
S Bickerton
B Williams

 
...

Topic: Continuous fibre thermoplastics/thermosets

R Kozlowski, J Mankowski, A Kubacki and K Kurtyka (pp 1-10)
Composite materials based on natural and recycled fibers for automotive industry

AJM Spencer (pp 11-19)
Springback in thermoviscoelastic channel sections




Topic: Continuous processes

C Weimer, P Mitschang and M Neitzel (pp 21=28)
Continuous manufacturing of tailored reinforcements for liquid infusion processes based on stitching technologies

DH Nash, WM Banks, AS Tooth and AE Flaherty (pp 29-38)
Manufacturing considerations in the support of large GRP storage vessels

D Thum, D Bhattacharyya, F Henniger and K Friedrich (pp 39-40)
Online consolidation of fibre-fabric reinforced thermoplastic composites

MJ Buntain and S Bickerton (pp 41-51)
compression flow permeability measurement - a continuous technique

R Loendersloot and R Akkerman (pp 53-62)
A least squares approximation of annular flow

F Henniger and K Friedrich (pp 63-72)
Process analysis of roll forming of thermoplastic composites

XL Liu, T Kruckenberg, P Falzon and R Paton (p 73-83)
Resin flow during injection pultrusion with multiple injection gates

U Huber and M Maier (pp 85-95)
Flow behaviour in saturated and unstaurated unidirectional fibre beds - a flow model




Topic: Deformation processes

Y Ping, Y Ohsako, H Yamauchi and H Sasaki (pp 97-103)
Modelling deformation behaviour of moulded bark particle board during pressing

E Bauer and W Huang (pp 105-110)
Interface behaviour between a granular body and a rough wall under shearing

Topic: Fabric properties

A Abdalla, KL PIckering and AG MacDonald (pp 111-117)
Mechanical properties of thermoplastic matrix composites with silane-treated wood fibre

MM Shokrieh and A Hosani (pp 119-128)
Shear buckling of composite driveshaft under torsion

XX Luo, K Pickering and DL Zhang ( 129-134)
The effects of reinforcement aspect ratio on the mechanical properties of AL-20vol%Al2O3 metal matrix composites

YK Yoon, JR Park, SD Park and HS Yoon (pp 135-140)
Mechanical and optical properties of optical fiber jumper cord (OJC) with composite coil springs

Topic: Forming sheet materials

T Sakuno, W Kamitchatani, C Akiyama and VE Gonzales (pp 141-146)
Manufacture and properties of composite boards made from kenaf

Topic: Resin transfer moulding/Liquid composites moulding

PJ Falzon, R Sweeting, R Paton and XL Liu (pp 147-157)
Permeability testing and characterisation of glass fibre reinforcements

A Shojaei, SR Ghaffarian and SMH Karimian (pp 159-167)
Numerical analysis of filling process in resin transfer moulding with controlled injection strategies

S Bickerton and MJ Buntain (pp 169-178)
The viscoelastic compression behaviour of liquid composite moulding preforms

G Bechtold, L Ye and K Friedrich (pp 179-188)
Influence of stochastic fibre distribution on permeabilities of fibre bundles

Topic: RIFT processes

B Qi, P Falzon, T Kruckenberg, R Paton and X liu (pp 189-198)
Resin flow in a resin film infusion process

MK Kang and WI Lee (pp 199-206)
factors affecting the air voids in vacuum assisted impregnation of fibers using flow-facilitating medium

Topic: Rheology/Viscoelasticity

D Joy, C Lenth, WJ Rigsby and K Pickering (pp 207-216)
The effect of hotstacking on temperature and moisture profiles in medium density fibreboard


Created by John Summerscales on 07 December 2012 and updated on 03-Jun-2016 15:49.