| Keynote paper:
Challenges and applications of liquid resin injection and infusion at
Airbus
B. Béral, G. Bazerque
Keynote paper:
Multi-Scale Modeling
in Liquid Composite Molding
S. G. Advani, N. Barnett, F. Zhou, P. Simacek
Keynote paper:
Composite Material
Parts in Renault Cars: the Past, the Present and the Future
A. Giocosa |
Session 1
PERMEABILITY PREDICTION – I
Finite Pointset Method
(FPM): A Meshfree Approach for Incompressible Flow Simulations Applied
to Composite Materials
A. Trameçon, P. de Luca, C. Binétruy, J. Kuhnert
Permeability of the Woven
Fabrics
B. Laine, G. Hivet, P. Boisse, F. Boust, P. Badel, S. V. Lomov
Modelling the Effects of
Fabric Structure on the Variability of Permeability
C. C. Wong, A. C. Long, C. D. Rudd
|
Session 11
PERMEABILITY PREDICTION – II
Wisetex-Based Models of Permeability
of Textiles
S. V. Lomov, I. Verpoest, B. Verleye, B. Laine, F. Boust
Predicting the Permeability
of Textile Reinforcements via a Hybrid Navier-Stokes-Brinkman Solver
B. Verleye, M. Klitz, R. Croce, D. Roose, M. Griebel, S. V. Lomov, I.
Verpoest
A Permeability Prediction
for Non-Crimp Fabrics
R. Loendersloot, R. Akkerman |
Session 2
EXPERIMENTAL ANALYSIS
Variability in Aerospace
VARTM Processing
P. Schulze, D. Heider
Liquid Composite Moulding:
Influence of Flow Front Confluence Angle on Laminate Porosity
G. A. Barandun, P. Ermanni
Characterisation of Wood
Fibre Mats as Reinforcement for the Resin Transfer Moulding Process
R. Umer, S. Bickerton, A. Fernyhough
Alkali Treatment of Jute
Fabrics: Influence on the Processing Conditions and the Mechanical Properties
of their Composites
E. S. Rodríguez, A. Vázquez |
Session 3
MODELLING
A New Formulation for the
Infusion of a Thermo-Reactive Resin into a Composite Deformable Medium
P. Celle, S. Drapier, J. M. Bergheau
Unsaturated Modelling of
Dual Scale Flow in Liquid Composite Moulding Processes
Y. Wang, S. M. Grove
Deviation from Darcy’s
Law: an Implication of Unsaturated Flow in Dual- Scale Fiber Mats in LCM
M. S. Munagavalasa, K. M. Pillai
Flow Modeling of the Compression
Resin Transfer Molding Process
J. M. Lawrence, P. Simacek, S. Laurenzi, S. G. Advani
Heat Transfer Modelling
During Liquid Composite Molding Manufacturing Processes : Comparison Between
Two Models
M. Deléglise, C. Binétruy, P. Castaing, P. Krawczak |
Session 4
FORMING
Processing of Low-Viscosity
CBT Thermoplastic Composites: Heat Transfer Analysis
A. Murtagh, S. Coll, C. Ó Brádaigh
Film Stacking Impregnation
Model for Thermoplastic Composites Applied to a Novel Net-shape Preforming
Process
S. T. Jespersen, M. D. Wakeman, D. Cramer, V. Michaud, J-A. E. Månson
Shear Deformation Behaviour
of Fibre-Reinforced Composites Using a Model Composite System
W. F. Stanley, P. J. Mallon
A Consistent Woven Fabric
Unit Cell and Preprocessor for Meso Analyses of Deformation and Permeability
G. Hivet, B. Laine, P. Boisse |
Session 5
MATERIALS CHARACTERISATION – I
Statistical Correlations
in the Permeability Tensor
L. M. McGrath, Q. Liu, R. S. Parnas
Measurement of Permeability
of Continuous Filament Mat Glass-Fibre Reinforcements by Saturated Radial
Airflow
R. Pomeroy, S. Grove, J. Summerscales, Y. Wang, A. Harper
Mechanical Properties and
Permeability Measurements of Fibre Reinforcements: A Continuous Method
S. Comas-Cardona, C. Binétruy, P. Krawczak |
Session 9
MATERIALS CHARACTERISATION – II
Modeling of Resin Cure Kinetics
for Molding Cycle Optimization
E. Ruiz, F. Waffo, J. Owens, C. Billotte, F. Trochu
A Stereo Photography System
for Monitoring Full Field Thickness Variation During Resin Infusion
Q. Govignon, S. Bickerton, J. Morris, J. Lin
Experimental Investigation
of the Compressibility and Permeability of Fabric Reinforcements
E. C. van de Ven, R. Loendersloot, R. Akkerman |
Session 6
SIMULATION – I
A Fast Numerical Approach
to Reduce Void Formation in Liquid Composite Molding
E. Ruiz, V. Achim, J. Bréard, S. Chatel, F. Trochu
Simulation of Process Induced
Defects in Resin Transfer Moulded Woven Carbon Fibre Laminates and their
effect on Mechanical Behaviour
B. Khan, K. D. Potter, M. R. Wisnom
Simulation of Entrapments
in LCM Processes
R. Arbter, P. Ermanni
Isothermal Flow Analysis
in Liquid Composite Molding Processes
M. Hattabi, J. Echaabi, A. Saouab
Simple Models for Mold Filling
Stage in Liquid Composite Molding and Their Applications to Structure-Process
Coupled Optimization
C. H. Park, A. Saouab, J. Bréard, R. Le Riche
|
Session 10
SIMULATION – II
Numerical Simulation of the
Infusion Processes Validation & Parametric Study
T. Ouahbi, A. Saouab, J. Bréard, P. Ouagne, S. Chatel
A Fast Solution Method for
Modeling the RTM-Process Using Simplified Geometries
F. Klunker, G. Ziegmann
Nonconforming Elements for
Liquid Composite Molding Process Simulations
P. Kelly, S. Jennings
Simulation of Articulated
Compression Resin Transfer Molding
V. Achim, S. Soukane, R. Gauvin, F. Trochu
A Simplified Numerical
Approach to Simulate Resin Transfer Molding with a Dispersion Medium
E. Ruiz, S. Chatel, F. Trochu |
Session 8
MONITORING AND CONTROL
Investigation of Capillary
Flow Across a Bank of Aligned Fibers
V. Neacsu, J. Leisen, S. G. Advani
Active Control of the Vacuum
Infusion Process
D. K. Modi, M. S. Johnson, A. C. Long , C. D. Rudd
Variations in the Unsaturated
Flow with Flow Direction in Liquid Composite Molding
T. Roy, K. M. Pillai
Monitoring and Control
for Liquid Composite Moulding
N. Pantelelis, G. Maistros |
Session 7
APPLICATIONS
Composites in High-End Industrial
Applications
M. Labordus, W. Souren
Novel Fabrication Methods
for (Low Temperature) Thermoformable Composites Intended for Medical Applications
R. R. Habeb, R. A. Khan, S. Cozien-Cazuc, Y. Jing, A. J. Parsons, G. S.
Walker, I. A. Jones, C. A. Scotchford, C. D. Rudd
Low Pressure Processing
of High Fiber Content Composites
V. Michaud, S. Sequeira Tavares, A. Sigg, S.Lavanchy, J.-A. E. Månson
Processing-Dependent Microstructure
of Long Glass Fibre Reinforced Polyamide 6-6 Injection Mouldings and Related
Mechanical Properties
E. Lafranche, A. Coulon, P. Krawczak, J.-P. Ciolczyk, J. Maugey
Effect of Packing Pressure
and Mold Temperature on Fiber Orientation in Injection Molding of Reinforced
Plastics
P. Shokri, N. Bhatnagar |
| POSTERS
Prediction and characterisation
of the shear behaviour of viscous woven textile composites
J. Wang, P. Harrison, A. C. Long, M. J. Clifford
Correlated permeability
distribution: mould filling simulations versus experimental results
F. Desplentere, S. V. Lomov, I. Verpoest
Nano Adhesive Bonding of
High Performance Polymer for Aerospace Applications
S. Bhowmik, H. W. Bonin, V. T. Bui, R. Benedictus
An Electrostatic Powder
Spray Process for Manufacturing Polyphthalamide High Performance Composite
C. Zaniboni, P. Ermanni
Structure and Properties
of PP-Based Sandwich Injection Moldings
Y. Fujita, T. Nagaoka, M. Kotaki, H. Hamada |
| |