Kulturens hus in Luleå, 30 May to 01 June 2018 |
| Committees |
| Local Organisation Committee | International Scientific Committee |
| Wednesday 30 May 2018 |
07:15-08:00 Registration
08:00-08:15/Lilla salen Opening of FPCM-14
08:15-09:00/Lilla salen Plenary I Prof Philippe H. Geubelle (Chair: N. Emami)
Faster, energy-efficient manufacturing of composite materials using frontal polymerization
10:20-10:40 Coffee
Session 2a: Permeability modelling II/Biocomposites Permeability of flow along and across fiber bundles: testing of permeability models through tow-scale experiments and simulations 10:58-11:16 Jingang Lu and Wook Ryol Hwang Effective viscosity in Stokes-Brinkman coupling using the Navier-slip for transverse flows in dual-scale fibrous porous media 11:16-11:34 Mathias Engelfried, Lyane Antonin Mavoungou, Ilja Verspohl, Patrick Böhler and Peter Middendorf Generating representative volume elements of yarns with non-circular filaments cross-sections 11:34-11:52 Lars Berglund and Jakob Wohlert Resin impregnation of nanostructured fibril networks | Session 2b: Process control and optimisation II Development of a dielectric sensor for the flow monitoring of resin transfer moulding process 10:58-11:16 Mikhail Matveev, Andreas Endruweit, Marco Iglesias, Andrew Longand Michael Tretyakov Fast algorithms for active control of mould filling in RTM process with uncertainties 11:16-11:34 Nico Liebers and Dominic Bertling Ultrasonic resin flow and cure monitoring 11:34-11:52 Roman Braun, Felix Klaenfoth and Sören Heißmeyer Impregnation simulation and design of injection boxes applied to prepregging for wind turbine rotor blades |
11:55-13:00 Lunch, and Meeting for FPCM International Scientific Committeein VIP-rummet
13:00-13:45/Lilla salen Keynote I & II (Chair: N. Emami)
Prof P. Marques, Graphene oxide:: a nanoplatfporm for multifunctional composites
Dr. M. Gresil, Graphene ~ the new materials for multifunctional composites
Session 3a: Wetting dynamics / Advanced exp. techniques Identification of key parameters in dynamic wetting and dewetting phenomena with molten polymers for composite processing 14:08-14:26 Yannick Bloeßl and Ralf Schledjewski Analysis of the capillary driven wetting behaviour in reinforcing textile structures 14:26-14:44 Pierre-Jacques Liotier, Monica Francesca Pucci and Sylvain Drapier Evaluation of capillary pressure depending on temperature with uncured resins by wicking tests 14:44-15:02 Baris Caglar, Cem Tekin and Véronique Michaud Fibre surface modification for flow enhancement in liquid composite molding 15:02-15:20 Sofia Larsson, Staffan Lundström and Henrik Lycksam Tomographic PIV of flow to high reflow through a model of well-ordered fabrics | Session 3b: Graphene as reinforcement I Biocompatibility, mechanical and tribological properties of GO reinforced thermoplastic polymer 14:08-14:26 Yijun Shi Synthesis of hollow fullerene-like molybdenum disulfide/reduced graphene oxide nanocomposites with excellent lubricating properties 14:26-14:44 Karolina Gaska, Xiangdong Xu, Christian Müller, Stanislaw Gubanski, Andrzej Rybak, Artur Siwek and Roland Kádár LDPE-GNP nanocompoites: manufacturing and properties 14:44-15:02 Brina Blinzler, Ragnar Larsson, Karolina Gaska and Roland Kádár Homogenization method for 2-D nano-structure reinforced polymer matrix 15:02-15:20 Guan Gong, Birgitha Nyström, Zainab Al-Maqdasi, Roberts Joffe and Runar Långström Development of functionalized wood composites for smart products |
15:20-15:40 Coffee
Session 4a: X-ray tomography in composites manufacturing 3D/4D quantitative studies using xiray microtomography: from snow crystals to metal structures 15:58-16:16 Julie Hemmer, Thibaut Savart, Arthur Babeau, Christian Burtin, Christophe Binetruy and Sébastien Comas-Cardona Fibrous reinforcement microstructure evolution during the infusion process: experimental characterization with CT-scan 16:16-16:34 Muhammad Ali, Rehan Umer and Kamran Khan Permeability and compaction characterization of a 3D orthogonal fabric using in-situ µXCT 16:34-16:52 Chiara Balbinot, Florian Martoïa, Laurent Orgéas and Pierre Dumont In situ 3D observations of the impregnation of model fibrous networks 16:52-17:10 Jeroen Soete, Stepan Lomov, Larissa Gorbatikh and Martine Wevers Exploratory study for the use of diffusive transport and the tortuosity factor, extracted from x-ray CT geometrical models, as proxy for permeability in composite materials |
Session 4b: Graphene as reinforcement II A nonlinear framework for the rheological characterization of polymer nanocomposites 15:58-16:16 Luca Palmeira Belotti, Nazanin Emami Effect of surface roughness and hygrothermal aging on multiscale carbon reinforced UHMWPE-composites 16:16-16:34 Upendra Kulshrestha, Subrata Bandhu Ghosh and Niti Nipun Sharma Microstructure property correlation of latex assisted fictionalized multi-walled carbon nanotube reinforced elastomeric nanocomposites 16:34-16:52 Yijun Shi Grafting heteroelement-rich groups on graphene oxide to improve lubrication performance 16:52-17:10 Nazanin Emami and Latifa Melk Fracture toughness and thermal characterization of GO based UHMWPE composites |
16:30-25:30 Storforsen and Jokkmokk Arctic Circle excursion
| Thursday 31 May 2018 |
07:45–08:00 Registration
08:00–08:45/Lilla salen Plenary II Prof Kristiina Oksman (Chair: S. Lundström):
Nanocellulose and its use in composites processing
Session 5a: Process modelling and simulation I Integration of capillary effects in the 3D orthotropic simulation of liquid resin infusion (LRI) processes 09:08-09:26 Julian Seuffert, Philipp Rosenberg, Luise Kärger, Frank Henning, Martin Kothmann and Günter Deinzer Mold filling simulation of a pressure controlled resin transfer molding (PC-RTM) process ~ method and application 09:26-09:44 Christophe Binetruy, Quentin Ayoul-Guilmard, Elena Syerko, Anthony Nouy, Minyoung Yun and Suresh Advani Efficient multiscale method to simulate liquid resin infusion process in fabrics with quasi-periodic permeability 09:44-10:02 Debabrata Adhikari, Suhasini Gururaja and Santosh Hemchandra Flow modeling of VARTM infusion in presence of HPM using level set approach 10:02-10:20 Arjen Koorevaar 3D Infusion simulation of wind turbine blades |
Session 5b: Bio- and nanocomposites Lessons from in-situ x-ray CT and high-resolution μ-CT imaging of liquid transport in timber for biocomposite manufacture 09:08-09:26 Tuukka Nissilä and Kristiina Oksman Cellulose nanofiber aerogels as preforms in vacuum infusion 09:26-09:44 Abubakar Umar Birnin-Yauri and Nor Azowa Ibrahim Hybrid natural fiber thermoplastic biocomposites: effect of modification of fiber and polymer on material properties 09:44-10:02 Dilmurat Abliz and Gerhard Ziegmann Multiphysic coupled impregnation simulation for RTM process with nanoparticle modified resin systems |
10:20-10:40 Coffee
Session 6a: Process modelling and simulation II Experimental validation of process simulations for vacuum-bag-only prepregs in thick-section structures 10:58-11:16 Alexander Bernath, Maximilian Grulich, Luise Kaerger and Frank Henning Enhanced viscosity characterization for fast curing epoxy resins at process relevant temperatures 11:16-11:34 Naziha Chebil, Mylène Deleglise-Lagardere and Chung-Hae Park Efficient numerical simulation method for three dimensional resin flow in laminated preform for liquid composite molding processes 11:34-11:52 Florian Wittemann, Robert Maertens, Luise Kaerger and Frank Henning Using OpenFoam for simulation of reactive injection moulding as a non-isothermal compressible multiphase flow 11:52-12:10 Martin McLean, Miroslav Stojkovic, Andrew George, Ayyoub Kabachi, Paolo Ermanni, Mario Danzi and Cristian Lira Facilitating process simulation through a shared permeability resource | Session 6b: Mechanical properties related to manufacturing/Textile mech One shot composite sandwich structure by liquid resin infusion, influence of manufacturing process parameters on low velocity impact 10:58-11:16 Guan Gong, Birgitha Nyström, Erik Sandlund, Daniel Eklund and Roberts Joffe Scaling-up production of CNT-coated fibre reinforcement using continuous EPD for high performance and multfunctional composites 11:16-11:34 Asami Nakai, Rika Tanaka, Ryo Hirai and Kazumasa Okayasu Effect of molding condition on mechanical properties of CFRP by HP-RTM 11:34-11:52 Bjoern Willenbacher, David May and Peter Mitschang Characterization of out-of-plane capillary pressure of textiles 11:52-12:10 Ayyoub Kabachi, Mario Danzi and Paolo Ermanni Experimental study on the influence of cyclic compaction on the fiber-bed static and dynamic compaction responses |
12:10-13:10 Lunch & posters
13:10-13:45/Lilla salen Keynote III Prof Pierre Dumont (Chair: R. Joffe)
3D characterisation of the microstructural evolution of SMCs during compression moulding
15:20-15:40 Coffee
Session 8a: Permeability measurement II Measurement of curved and sheared permeability 15:58-16:16 Louis Grou and Pascal Hubert Experimental permeability evaluation of bindered preform 16:16-16:34 Philippe Causse and François Trochu Combined characterization of pore size distribution and permeability in fibrous textiles by capillary flow porometry 16:34-16:52 Robert Graupner and Klaus Drechsler Quantitative transversal permeability testing ~ challenges and enhancements 16:52-17:10 Bin Yang, Jihui Wang and Xianglin Li Development of a new testing bench for textile through-thickness permeability characterization | Session 8b: Consolidation of prepregs/Process optimisation A comparison of the approaches to the process modelling of sheet moulding compound 15:58-16:16 Pavel Simacek and Suresh G. Advani Resin and porosity redistribution during consolidation 16:16-16:34 Anthony Favaloro, Drew Sommer and R Byron Pipes Process simulation of compression molding of prepreg platelet molding systems 16:34-16:52 Chady Ghnatios, Pavel Simacek, Francisco Chinesta and Suresh Advani Modeling consolidation and void dynamics during automated tape placement process 16:52-17:10 Nicolas Montes, Lucia Hilario, Francisco Chinesta, Antonio Falco and Jean Louis Duval PGD-vademecum for based distance optimization and control methods in LCM processes |
17:20-19:20 Workshop (Lilla salen): Permeability measurements/David May
19:40-23:20 Conference dinner
| Friday 01 June 2018 |
07:45–08:00 Registration
08:00–08:45/Lilla salen Plenary III Prof Wook Ryol Hwang (Chair: Y. Aitomäki)
Quantification of flows of non-Newtonian fuilds in terms of energy dissipation rate: viscometry, mobility, tortuosity and process monitoring
Session 9a: LCM of melt processable thermoplastics Thermoplastic melt impregation of composite laminates by injection-compression process 09:08-09:26 Damiano Salvatori and Véronique Michaud Straegies for in-plane thermoplastic melt impregnation of glass-fabrics 09:26-09:44 Julia Studer, Clemens Dransfeld, Jon Jauregui Cano, Bodo Fiedler, Julie Hemmer, François Bertrand, Christophe Binetruy, Sébastien Comas Cardona, Christian Burtin and Andre Keller Through thickness thermoplastic melt impregnation: effect of fabric architecture on compaction and permeanility under high pressure processing 09:44-10:02 Henri Perrin, Arnaud Martin, Christian Lavy and David Ruch Reactive thermoplastic composite/aluminium interface characterisation and optimization 10:02-10:20 David Hughes, Stewart Keir and Carl Meggs Digital twin methodology for compression moulded thermoplastic composite optimization | Session 9b: Defects & particles I Effect of fabric deformation and flow velocity on generation of porosity in infusion processes 09:08-09:26 Thomas Rendall and James Kratz Numerical modeling of void behavior 09:26-09:44 Loïc Chevalier, Julien Bruchon, Nicolas Moulin, Pierre-Jacques Liotierand Sylvain Drapier Stokes capillary driven flows in fibrous media 09:44-10:02 Yo Kamei, Haruka Ohgaki and Ichiro Ueno Impregnation process of viscous fluid in woven fbre bunles driven by pressure difference 10:02-10:20 Caleb Lystrup, Perry Burton, Andrew George and David Fullwood Optical void formation and mobility measurements in carbon fiber reinforcements |
10:20-10:40 Coffee
Session 10a: Processing of thermoplastic composites Influence of geometry on component quality and properties in overmoulded thermoplastic composite parts 10-58-11:16 Nesrine Aissa, Luisa Silva, Emmanuelle Abisset-Chavanne and Hugues Digonnet High performance simulation of short fiber suspensions for manufacturing processes 11:16-11:34 Waqas Ali, Mohammed Iqbal Abdul Rasheed, Ulrich Sachs, Hubertus JM Geijselaers and Remko Akkerman Deformation mechanism in compression moulding of thermoplastic composites 11:34-11:52 Guillaume Vincent, Thomas de Bruijn, Mohammed Iqbal Abdul Rasheed and Sebastiaan Wijskamp flow behaviour of recycled thermoplastic composites processed by low-shear mixing | Session 10b: Defects & particles II / Compaction of fabrics Air permeability of balsa core, and its influence on defect formation in resin infused sandwich laminates 10-58-11:16 Dominic Bertling and Nico Liebers Analysis and simulation of dry-spot behaviour in liquid composite molding 11:16-11:34 Nihad Siddig, Laurent Bizet and Abdelghani Saouab An experimental investigation for the impregnation of particle filled fibrous preform in resin transfer moulding (RTM) 11:34-11:52 Masoud Bodaghi, Rui Gome, Pavel Simacek, Suresh G Advani and Nuno Correia Experimental study of fibre washout induced by high injection pressure during resin transfer moulding 11:52-12:10 Willsen Wijaya, Piaras Kelly and Simon Bickerton On improved tow compaction modelling for accurate permeability prediction of woven textiles |
12:10-13:10 Lunch
14:25 Closing of Conference
14:30 Coffee
| Committees |
Local Organisation Committee
|
International Scientific Committee
|
| This page was created by John Summerscales on 04 September 2018 from the conference webpage and updated on 17-Oct-2018 9:12 |